Assessment of soil-soil solution distribution coefficients of global fallout 237Np and 239Pu in Japanese upland soils.

Neptunium-237 and 239Pu are important radionuclides in the safety assessment related to geological disposal of radioactive waste because of the possibility of long-term exposure to humans. Mobilities of these radionuclides in the environment are of particular importance for their radiation dose evaluation; therefore, in this study, we have made the assessment of the soil-soil solution distribution coefficient (Kd, L/kg) using global fallout 237Np and 239Pu in Japanese upland soils. The Kd values were determined by extracting these radionuclides from 24 soil samples using a laboratory batch method. The desorption Kd values of 237Np ranged from 3.3 × 102 to 1.0 × 104 L/kg, and their geometric mean (GM) and arithmetic mean (AM) were 1.7 × 103 L/kg and 2.6 × 103 L/kg, respectively. The desorption Kd values of 239Pu were found to vary from 9.4 × 103 to 7.1 × 104 L/kg, and their GM and AM were 3.3 × 104 L/kg and 4.0 × 104 L/kg, respectively. In Japanese upland soils, the Kd value of 239Pu was one order of magnitude higher than that of 237Np.

Highly efficient uptake of neptunium from acidic feeds using two solid phase extraction resins containing diglycolamide-functionalized calix[4]arene ligands.

Two solid phase extraction resins (SPER) were prepared by impregnating solutions of two diglycolamide-functionalized calix[4]arenes in 10% isodecanol in n-dodecane into Chromosorb W, as the stationary phase. While SPER-I contained n-propyl functionalized calix[4]arene, SPER-II contained the calix[4]arene with isopentyl groups at the carboxamide nitrogen atoms. The SPERs were characterized by SEM, TGA, FTIR, etc. and were used for the batch uptake of neptunium(IV) from nitric acid feed solutions. While the uptake of Np(IV) was extremely high with SPER-I (Kd: 47,544 at 3 M nitric acid, ca. 8% extractant loading), SPER-II displayed a significantly lower extraction efficiency (Kd: 13,724 under identical conditions) as indicated by the batch uptake studies. Sorption isotherm studies were carried out which indicated good fitting to the Langmuir model suggesting uptake conforming to monolayer sorption. Fitting to the D-R isotherm model conformed to a chemisorption model. Column studies were also carried out and the elution profiles, obtained with solutions of oxalic acid and nitric acid indicated very sharp peaks suggesting that the column can be used for the separation of Np(IV) from acidic radioactive feeds.

First study of 237Np in Chinese soils: Source, distribution and mobility in comparison with plutonium isotopes.

In this study, the distribution and migration of 237Np and 239+240Pu in soils in the vicinity (<5 km) of Qinshan and Tianwan Nuclear Power Plants in China were studied, which is the first specific study of global fallout 237Np in Chinese soils. The 237Np and 239+240Pu concentrations in surface soils showed large spatial inhomogeneity. A remarkable 239+240Pu concentration (4.783 mBq/g) was observed in a surface soil near Qinshan NPP and stands for the ever reported highest value in the Chinese soils. The inventories of 239+240Pu in two Qinshan and Tianwan soil cores were estimated to be 128.8 Bq/m2 and 121.0 Bq/m2, respectively; while the 237Np inventories were 0.039 Bq/m2 and 0.035 Bq/m2 at these sites, respectively. The 240Pu/239Pu atomic ratios in these soils indicated that the global fallout is the main source of Pu in these regions. However, the non-isotopic 237Np/239Pu atomic ratio in environmental soil is not a sensitive indicator for source identification. Furthermore, we conducted pilot study on the migration behaviors of 237Np and 239+240Pu in soil core at Qinshan site with the Convection-Dispersion Equation (CDE) model. The obtained apparent dispersion coefficients of 237Np (2.82 ± 2.06 cm2/y) was 5 times higher than that of 239+240Pu (0.57 ± 0.16 cm2/y), proving that 237Np has stronger migration ability than Pu isotopes in the Qinshan soil. Finally, we predicted that with the increase of migration time, both 237Np and 239+240Pu concentration in the soil will gradually become more evenly distributed among different soil layers due to the dominant dispersion effects.

Determination of kinetic parameters of redox reactions using CE-ICP-MS: A case study for the reduction of Np(V) by hydroxylamine hydrochloride.

The rate constants k of the reduction of 5 × 10-5  M Np(V) to Np(IV) by hydroxylamine hydrochloride (HAHCl) in 1 M HCl have been determined by CE-ICP-MS in the temperature range of ϑ = 30-70°C and with varying concentrations of HAHCl from 1 to 7.2 M. The reaction was found to have (pseudo)first order kinetics with respect to HAHCl. The experimental results for k ranged from 0.0029(1) min-1 (ϑ = 40°C, c(HAHCl) = 3 M) to 0.039(7) min-1 (ϑ = 60°C, c(HAHCl) = 7.2 M). The activation energy of the reaction was determined as EA  = (72 ± 10) kJ/mol. These results and a comparison with literature data show that the coupling of CE to ICP-MS provides a powerful analytical tool for the investigation of the kinetic aspects of redox reactions of actinides at low concentrations. On the basis of this proof-of-principle study, the method presented here can be extended to the investigation of the kinetic parameters of other redox systems containing different actinides (or transition metals) and oxidants/reductants.

On the sequential separation and quantification of 237Np, 241Am, thorium, plutonium, and uranium isotopes in environmental and urine samples.

The implementation of the one-pass-through separation technique using two stacked chromatography columns of TEVA - TRU resins for the separation of 237Np, 241Am, thorium, plutonium and uranium from environmental and urine samples was investigated. The sequential separation technique proved to be successful and gave similar results to those obtained when using individual separations. The analysis time was considerably improved. The amount of chemical waste was also reduced by 50% and the use of HClO4 was avoided. The technique of ICP-MS was also investigated as a complementary technique to alpha-spectrometry.

237Np analytical method using 239Np tracers and application to a contaminated nuclear disposal facility.

Environmental 237Np analyses are challenged by low 237Np concentrations and lack of an available yield tracer; we report a rapid, inexpensive 237Np analytical approach employing the short lived 239Np (t1/2 = 2.3 days) as a chemical yield tracer followed by 237Np quantification using inductively coupled plasma-mass spectrometry. 239Np tracer is obtained via separation from a 243Am stock solution and standardized using gamma spectrometry immediately prior to sample processing. Rapid digestions using a commercial, 900 W "Walmart" microwave and Parr microwave vessels result in 99.8 ± 0.1% digestion yields, while chromatographic separations enable Np/U separation factors on the order of 106 and total Np yields of 95 ± 4% (2σ). Application of this method to legacy soil samples surrounding a radioactive disposal facility (the Subsurface Disposal Area at Idaho National Laboratory) reveal the presence of low level 237Np contamination within 600 m of this site, with maximum 237Np concentrations on the order of 103 times greater than nuclear weapons testing fallout levels.

XAS and TRLIF spectroscopy of uranium and neptunium in seawater.

Seawater contains radionuclides at environmental levels; some are naturally present and others come from anthropogenic nuclear activity. In this report, the molecular speciation in seawater of uranium(VI) and neptunium(V) at a concentration of 5 × 10(-5) M has been investigated for the first time using a combination of two spectroscopic techniques: Time-resolved laser-induced fluorescence (TRLIF) for U and extended X-ray absorption fine structure (EXAFS) for U and Np at the LIII edge. In parallel, the theoretical speciation of uranium and neptunium in seawater at the same concentration is also discussed and compared to spectroscopic data. The uranium complex was identified as the neutral carbonato calcic complex UO2(CO3)3Ca2, which has been previously described in other natural systems. In the case of neptunium, the complex identified is mainly a carbonato complex whose exact stoichiometry is more difficult to assess. The knowledge of the actinide molecular speciation and reactivity in seawater is of fundamental interest in the particular case of uranium recovery and more generally regarding the actinide life cycle within the biosphere in the case of accidental release. This is the first report of actinide direct speciation in seawater medium that can complement inventory data.

Concurrent determination of 237Np and Pu isotopes using ICP-MS: analysis of NIST environmental matrix standard reference materials 4357, 1646a, and 2702.

An optimized method was developed to analyze environmental soil and sediment samples for (237)Np, (239)Pu, and (240)Pu by ICP-MS using a (242)Pu isotope dilution standard. The high yield, short time frame required for analysis, and the commercial availability of the (242)Pu tracer are significant advantages of the method. Control experiments designed to assess method uncertainty, including variation in inter-element fractionation that occurs during the purification protocol, suggest that the overall precision for measurements of (237)Np is typically on the order of ± 5%. Measurements of the (237)Np concentration in a Peruvian Soil blank (NIST SRM 4355) spiked with a known concentration of (237)Np tracer confirmed the accuracy of the method, agreeing well with the expected value. The method has been used to determine neptunium and plutonium concentrations in several environmental matrix standard reference materials available from NIST: SRM 4357 (Radioactivity Standard), SRM 1646a (Estuarine Sediment) and SRM 2702 (Inorganics in Marine Sediment).

Analysis of trace neptunium in the vicinity of underground nuclear tests at the Nevada National Security Site.

A high sensitivity analytical method for (237)Np analysis was developed and applied to groundwater samples from the Nevada National Security Site (NNSS) using short-lived (239)Np as a yield tracer and HR magnetic sector ICP-MS. The (237)Np concentrations in the vicinity of the Almendro, Cambric, Dalhart, Cheshire, and Chancellor underground nuclear test locations range from <4 × 10(-4) to 2.6 mBq/L (6 × 10(-17)-4.2 × 10(-13) mol/L). All measured (237)Np concentrations are well below the drinking water maximum contaminant level for alpha emitters identified by the U.S. EPA (560 mBq/L). Nevertheless, (237)Np remains an important indicator for radionuclide transport rates at the NNSS. Retardation factor ratios were used to compare the mobility of (237)Np to that of other radionuclides. The results suggest that (237)Np is less mobile than tritium and other non-sorbing radionuclides ((14)C, (36)Cl, (99)Tc and (129)I) as expected. Surprisingly, (237)Np and plutonium ((239,240)Pu) retardation factors are very similar. It is possible that Np(IV) exists under mildly reducing groundwater conditions and exhibits a retardation behavior that is comparable to Pu(IV). Independent of the underlying process, (237)Np is migrating downgradient from NNSS underground nuclear tests at very low but measureable concentrations.

Rapid multisample analysis for simultaneous determination of anthropogenic radionuclides in marine environment.

An automated multisample processing flow injection (FI) system was developed for simultaneous determination of technetium, neptunium, plutonium, and uranium in large volume (200 L) seawater. Ferrous hydroxide coprecipitation was used for the preliminary sample treatment providing the merit of simultaneous preconcentration of all target radionuclides. Technetium was separated from the actinides via valence control of technetium (as Tc(VII)) in a ferric hydroxide coprecipitation. A novel preseparation protocol between uranium and neptunium/plutonium fractions was developed based on the observation of nearly quantitative dissolution of uranium in 6 mol/L sodium hydroxide solution. Automated extraction (TEVA for technetium and UTEVA for uranium) and anion exchange (AGMP-1 M for plutonium and neptunium) chromatographic separations were performed for further purification of each analyte within the FI system where four samples were processed in parallel. Analytical results indicate that the proposed method is robust and straightforward, providing chemical yields of 50-70% and improved sample throughput (3-4 d/sample). Detection limits were 8 mBq/m(3) (0.013 pg/L), 0.26 µBq/m(3) (0.010 fg/L), 23 µBq/m(3) (0.010 fg/L), 84 µBq/m(3) (0.010 fg/L) and 0.6 mBq/m(3) (0.048 ng/L) for (99)Tc, (237)Np, (239)Pu, (240)Pu and (238)U for 200 L seawater, respectively. The unique feature of multiradionuclide and multisample simultaneous processing vitalizes the developed method as a powerful tool in obtaining reliable data with reduced analytical cost in both radioecology studies and nuclear emergency preparedness.

(237)Np Mössbauer effect study on NpFeAsO.

We report (237)Np Mössbauer measurements on NpFeAsO. The Np atoms were found to occupy only one crystallographic site. The value of the isomer shift (δ âˆ¼ 9.1 mm s(-1) versus NpAl2) indicates a 5f(4) electronic configuration (Np(3+) ions). The magnetic ordering of the Np sublattice below 60 K is established and the saturated ordered magnetic moment is determined to be 1.73µB at 3.6 K. The unique set of hyperfine parameters exclude a modulated magnetic structure or spin waves on the Np site. The neptunium magnetic moments µNp are found to lie along the tetragonal c-axis.

Standardization of (166m)Ho and 243Am/239Np by live-timed anti-coincidence counting with extending dead time.

The National Laboratory for Metrology of Ionizing Radiation (LNMRI)/Brazil acquired (166m)Ho and (243)Am/(239)Np solutions from commercial suppliers in order to realize primary standardization and therefore reducing the associated uncertainties. The method used in the standardization was the live-timed 4πß(LS)-γ(ΝaI(Tl)) anticoincidence counting. The live-timed anticoincidence system is operated since 2006 in LNMRI and is composed of two MTR2 modules donated by Laboratoire National Henri Becquerel (LNE-LNHB)/France. The data acquisition system uses a homemade LabView program and an Excel file for calculus. These systems have been used for primary standardization at LNMRI for many radionuclides and recently took part in the (124)Sb and (177)Lu International Key Comparisons with good performance.

Uptake of Np(IV) by C-S-H phases and cement paste: an EXAFS study.

Nuclear waste disposal concepts developed worldwide foresee the use of cementitious materials for the immobilization of long-lived intermediate level waste (ILW). This waste form may contain significant amounts of neptunium-237, which is expected to be present as Np(IV) under the reducing conditions encountered after the closure of the repository. Predicting the release of Np(IV) from the cementitious near field of an ILW repository requires a sufficiently detailed understanding of its interaction with the main sorbing components of hardened cement paste (HCP). In this study, the uptake of Np(IV) by calcium silicate hydrates (C-S-H) and HCP has been investigated using extended X-ray absorption fine structure (EXAFS) spectroscopy. The EXAFS studies on Np(IV)-doped C-S-H and HCP samples reveal that Np(IV) is predominantly incorporated in the structure of C-S-H phases having different Ca:Si ratios. The two main species identified correspond to Np(IV) in C-S-H with a Ca:Si mol ratio of 1.65 as in fresh cement and with a Ca:Si mol ratio of 0.75 as in highly degraded cement. The local structure of Np(IV) changes with the Ca:Si mol ratio and does not depend on pH. Furthermore, Np(IV) shows the same coordination environment in C-S-H and HCP samples. This study shows that C-S-H phases are responsible for the Np(IV) uptake by cementitious materials and further that incorporation in the interlayer of the C-S-H structure is the dominant uptake mechanism.

Rapid determination of (237)Np and plutonium isotopes in urine by inductively-coupled plasma mass spectrometry and alpha spectrometry.

A new rapid separation method was developed for the measurement of plutonium and neptunium in urine samples by inductively-coupled plasma mass spectrometry (ICP-MS) and/or alpha spectrometry with enhanced uranium removal. This method allows separation and preconcentration of plutonium and neptunium in urine samples using stacked extraction chromatography cartridges and vacuum box flow rates to facilitate rapid separations. There is an increasing need to develop faster analytical methods for emergency response samples. There is also enormous benefit to having rapid bioassay methods in the event that a nuclear worker has an uptake (puncture wound, etc.) to assess the magnitude of the uptake and guide efforts to mitigate dose (e.g., tissue excision and chelation therapy). This new method focuses only on the rapid separation of plutonium and neptunium with enhanced removal of uranium. For ICP-MS, purified solutions must have low salt content and low concentration of uranium due to spectral interference of (238)U(1)H(+) on m/z 239. Uranium removal using this method is enhanced by loading plutonium and neptunium initially onto TEVA resin, then moving plutonium to DGA resin where additional purification from uranium is performed with a decontamination factor of almost 1×10(5). If UTEVA resin is added to the separation scheme, a decontamination factor of ~3 × 10(6) can be achieved.

Determination of neptunium in environmental samples by extraction chromatography after valence adjustment.

Neptunium(V) ions are unstable in acid media, which limits their extraction on chromatographic resins. We developed a novel analytical method to measure Np by either α-spectrometry or inductively coupled plasma mass spectrometry (ICP-MS) after extraction chromatography as Np(VI). We investigated the reactivity of various oxidizing reagents, and determined the retention capacity of Np(IV, V, and VI) on various extraction chromatographic supports. A simple method using two UTEVA resins was used to rapidly detect Np in soil and sediment samples.

Reconstruction of local fallout composition and gamma-ray exposure in a village contaminated by the first USSR nuclear test in the Semipalatinsk nuclear test site in Kazakhstan.

After the disintegration of the USSR in end of 1991, it became possible for foreign scientists to visit Kazakhstan, in order to investigate the radiological consequences of nuclear explosions that had been conducted at the Semipalatinsk nuclear test site (SNTS). Since the first visit in 1994, our group has been continuing expeditions for soil sampling at various areas around SNTS. The current level of local fallout at SNTS was studied through γ-spectrometry for (137)Cs as well as α-spectrometry for (239,240)Pu. Average values of soil inventory from wide areas around SNTS were 3,500 and 3,700 Bq m(-2) for (137)Cs and (239,240)Pu, respectively, as of January 1, 2000. The average level of (137)Cs is comparable to that in Japan due to global fallout, while the level of (239,240)Pu is several tens of times larger than that in Japan. Areas of strong contamination were found along the trajectories of radioactive fallout, information on which was declassified after the collapse of the USSR. Our recent efforts of soil sampling were concentrated on the area around the Dolon village heavily affected by the radioactive plume from the first USSR atomic bomb test in 1949 and located 110 km east from ground zero of the explosion. Using soil inventory data, retrospective dosimetry was attempted by reconstructing γ-ray exposure from fission product nuclides deposited on the ground. Adopting representative parameters for the initial (137)Cs deposition (13 kBq m(-2)), the refractory/volatile deposition ratio (3.8) and the plume arrival time after explosion (2.5 h), an absorbed dose in air of 600 mGy was obtained for the 1-year cumulative dose in Dolon village, due to the first bomb test in 1949. Considering possible ranges of the parameters, 350 and 910 mGy were estimated for high and low cases of γ-ray dose in air, respectively. It was encouraging that the deduced value was consistent with other estimations using thermal luminescence and archived monitoring data. The present method can be applied to other settlements affected by local fallout from SNTS.

Neptuniumnn(V) sorption and diffusion in opalinus clay.

The sorption and diffusion behavior of 8 x 10(-6) M Np(V) in Opalinus Clay (OPA) with synthetic pore water (pH 7.6) as mobile phase was studied under ambient conditions by batch and diffusion experiments, respectively. The Kd value determined by batch experiments with OPA suspensions is equal to 0.025 +/- 0.005 m3/kg. The diffusion-accessible porosity epsilon of intact OPA as determined by through- and out-diffusion experiments with tritiated water (HTO) is equal to 0.15 +/- 0.01. The diffusion coefficient De and the rock capacity factor alpha of 22Na+ in OPA were measured by through-, out-, and in-diffusion experiments and asserted the reliability of these diffusion techniques. For the diffusion of Np(V) in synthetic pore water, the capillary method gave Dw = (6.0 +/- 1.0) x 10(-10) m/s. Due to the strong sorption of Np(V) on CPA, the diffusion of Np(V) was investigated bythe in-diffusiontechnique.The diffusion parameters for Np(V) in OPA are De = (6.9 +/- 1.1) x 10(-12) m2/s and alpha = 243 +/- 4. This corresponds to Kd = 0.10 +/- 0.01 m3/kg for the sorption of Np(V) in intact OPA.

Direct determination of plutonium(V) and neptunium(V) complexation by carbonate ligand with CE-ICP-sector field MS.

Direct determination of the stability constants of some pentavalent actinides (Np and Pu) with carbonate ligands was investigated by CE-ICP-sector field MS (SFMS). The high sensitivity of ICP-SFMS coupled with the high separation power of CE makes it possible to determine the mobility of each species as well as the stability constants with good accuracy. A procedure for preparing pentavalent plutonium at trace level has been successfully tested enabling the study of Pu(V) complexation by CE-ICP-SFMS. Stability constants beta1, beta2 and beta3 have been obtained at 25 +/- 1 degrees C at a constant ionic strength of 0.37 M in NaClO4 for K1 and NaCl for beta2 and beta3. The results were extrapolated to zero ionic strength and compared with data available in the literature for Np(V). The following stability constants were obtained for a Pu(V)/CO3 system: logbeta(1)(0) = 4.95 +/- 0.10, logbeta(2)(0) = 6.34 +/- 0.10, and logbeta(3)(0) = 5.61 +/- 0.16.

PU and NP analysis of soil and sediment samples with ICP-MS.

A method to analyse Pu and Np was optimised to achieve low detection limits and high sample throughput. Soil and sediment samples were ashed and digested with a borate fusion. After dissolving the melt in nitric acid, Pu and Np were separated on a TEVA extraction chromatopraphy column. It was measured with a sector field ICP-MS. Detection limits in soils and sediments as low as 1x10(-15)g/g for Pu and Np were achieved. The method was applied to reference materials, soil profiles from Switzerland and sediment samples from the river Yenisei (RU), where radioactive nuclides have been discharged.

Direct high-resolution alpha spectrometry from nuclear fuel particles in an outdoor air sample.

The potential use of direct high-resolution alpha spectrometry to identify the presence of transactinium elements in air samples is illustrated in the case when alpha-particle-emitting radionuclides are incorporated in nuclear fuel particles. Alpha particle energy spectra are generated through Monte Carlo simulations assuming a nuclide composition similar to RBMK (Chernobyl) nuclear fuel. The major alpha-particle-emitting radionuclides, in terms of activity, are 242Cm, 239Pu and 240Pu. The characteristics of the alpha peaks are determined by fuel particle properties as well as the type of the air filter. It is shown that direct alpha spectrometry can be readily applied to membrane filter samples containing nuclear fuel particles when rapid nuclide identification is of relevance. However, the development of a novel spectrum analysis code is a prerequisite for unfolding complex alpha spectra.