Long-acting nanoparticle-loaded bilayer microneedles for protein delivery to the posterior segment of the eye.

Treatment of neovascular ocular diseases involves intravitreal injections of therapeutic proteins using conventional hypodermic needles every 4-6 weeks. Due to the chronic nature of these diseases, these injections will be administrated to patients for the rest of their lives and their frequent nature can potentially pose a risk of sight-threatening complications and poor patient compliance. Therefore, we propose to develop nanoparticle (NP)-loaded bilayer dissolving microneedle (MN) arrays, to sustain delivery of protein drugs in a minimally invasive manner. In this research, a model protein, ovalbumin (OVA)-encapsulated PLGA NPs were prepared and optimised using a water-in-oil-in-water (W/O/W) double emulsion method. The impact of stabilisers and primary sonication time on the stability of encapsulated OVA was evaluated using an enzyme-linked immunosorbent assay (ELISA). Results showed that the lower primary sonication time was capable of sustaining release (77 days at 28.5% OVA loading) and improving the OVA bioactivity. The optimised NPs were then incorporated into a polymeric matrix to fabricate bilayer MNs and specifically concentrated into MN tips by high-speed centrifugation. Optimised bilayer MNs exhibited good mechanical and insertion properties and rapid dissolution kinetics (less than 3 min) in excised porcine sclera. Importantly, ex vivo transscleral distribution studies conducted using a multiphoton microscope confirmed the important function of MN arrays in the localisation of proteins and NPs in the scleral tissue. Furthermore, the polymers selected to prepare bilayer MNs and OVA NPs were determined to be biocompatible with retinal cells (ARPE-19). This delivery approach could potentially sustain the release of encapsulated proteins for more than two months and effectively bypass the scleral barrier, leading to a promising therapy for treating neovascular ocular diseases.

Silica particles incorporated into PLGA-based in situ-forming implants exploit the dual advantage of sustained release and particulate delivery.

Poly (lactic-co-glycolic acid) (PLGA) in situ-forming implants are well-established drug delivery systems for controlled drug release over weeks up to months. To prevent initial burst release, which is still a major issue associated with PLGA-based implants, drugs attached to particulate carriers have been encapsulated. Unfortunately, former studies only investigated the resulting release of the soluble drugs and hence missed the potential offered by particulate drug release. In this study, we developed a system capable of releasing functional drug-carrying particles over a prolonged time. First, we evaluated the feasibility of our approach by encapsulating silica particles of different sizes (500 nm and 1 µm) and surface properties (OH or NH2 groups) into in situ-forming PLGA implants. In this way, we achieved sustained release of particles over periods ranging from 30 to 70 days. OH-carrying particles were released much more quickly when compared to NH2-modified particles. We demonstrated that the underlying release mechanisms involve size-dependent diffusion and polymer-particle interactions. Second, particles that carried covalently-attached ovalbumin (OVA) on their surfaces were incorporated into the implant. We demonstrated that OVA was released in association with the particles as functional entities over a period of 30 days. The released particle-drug conjugates maintained their colloidal stability and were efficiently taken up by antigen presenting cells. This system consisting of particles incorporated into PLGA-based in situ-forming implants offers the dual advantage of sustained and particulate release of drugs as a functional unit and has potential for future use in many applications, particularly in single-dose vaccines.

Antigen-Conjugated Silica Solid Sphere as Nanovaccine for Cancer Immunotherapy.

BACKGROUND: Nanocarriers could deliver significantly higher amounts of antigen to antigen-presenting cells (APCs), which have great potential to stimulate humoral and cellular response in cancer immunotherapy. Thereafter, silica solid nanosphere (SiO2) was prepared, and a model antigen (ovalbumin, OVA) was covalently conjugated on the surface of SiO2 to form nanovaccine (OVA@SiO2). And the application of OVA@SiO2 for cancer immunotherapy was evaluated. MATERIALS AND METHODS: SiO2 solid nanosphere was prepared by the Stöber method, then successively aminated by aminopropyltriethoxysilane and activated with glutaraldehyde. OVA was covalently conjugated on the surface of activated SiO2 to obtain nanovaccine (OVA@SiO2). Dynamic light scattering, scanning electron microscope, and transmission electron microscope were conducted to identify the size distribution, zeta potential and morphology of OVA@SiO2. The OVA loading capacity was investigated by varying glutaraldehyde concentration. The biocompatibility of OVA@SiO2 to DC2.4 and RAW246.7 cells was evaluated by a Cell Counting Kit-8 assay. The uptake of OVA@SiO2 by DC2.4 and its internalization pathway were evaluated in the absence or presence of different inhibitors. The activation and maturation of bone marrow-derived DC cells by OVA@SiO2 were also investigated. Finally, the in vivo transport of OVA@SiO2 and its toxicity to organs were appraised. RESULTS: All results indicated the successful covalent conjugation of OVA on the surface of SiO2. The as-prepared OVA@SiO2 possessed high antigen loading capacity, which had good biocompatibility to APCs and major organs. Besides, OVA@SiO2 facilitated antigen uptake by DC2.4 cells and its cytosolic release. Noteworthily, OVA@SiO2 significantly promoted the maturation of dendritic cells and up-regulation of cytokine secretion by co-administration of adjuvant CpG-ODN. CONCLUSION: The as-prepared SiO2 shows promising potential for use as an antigen delivery carrier.

A Novel Transdermal Protein Delivery Strategy via Electrohydrodynamic Coating of PLGA Microparticles onto Microneedles.

Transdermal delivery of biological therapeutics is emerging as a potent alternative to intravenous or subcutaneous injections. The latter possess major challenges including patient discomfort, the necessity for trained personnel, specialized sharps disposal, and risk of infection. The microneedle (MN) technology circumvents many of the abovementioned challenges, delivering biological materials directly into the skin and allowing sustained release of the active ingredient both in animal models and in humans. This study describes the use of electrohydrodynamic atomization (EHDA) to coat ovalbumin (OVA)-loaded PLGA nanoparticles onto hydrogel-forming MN arrays. The particles showed extended release of OVA over ca. 28 days. Microscopic analysis demonstrated that EHDA could generate a uniform particle coating on the MNs, with 30% coating efficiency. Furthermore, the coated MN array manifested similar mechanical characteristics and insertion properties to the uncoated system, suggesting that the coating should have no detrimental effects on the application of the MNs. The coated MNs resulted in no significant increase in anti-OVA-specific IgG titres in C57BL/6 mice in vivo as compared to the untreated mice (paired t-test, p > 0.05), indicating that the formulations are nonimmunogenic. The approach of using EHDA to coat an MN array thus appears to have potential as a novel noninvasive protein delivery strategy.

Antigen Delivery to Antigen-Presenting Cells for Adaptive Immune Response by Self-Assembled Anionic Polysaccharide Nanogel Vaccines.

Although current vaccine technology induces sufficient antibody responses to prophylactically ward off viral infections, an anticancer vaccine that directs the patient's immune system to directly fight extant malignant cells will require inducing Th1 and cytotoxic T lymphocyte responses in addition to antibody-mediated activities. Thus, new mechanisms are necessary to deliver antigen to cells in the lymphatic system that will induce these responses. To this end, we have developed a cholesterol-bearing pullulan (CHP) self-assembly nanogel of less than 100 nm, which we have now further modified to be anionic by carboxyl group substitution. Overall, the nanogel-protected antigens during transport to the lymphatic system and converting the vehicle to an anionic charge improved interactions with antigen-presenting cells. We further show that these modified nanogels are a more efficient system for delivering antigen to antigen-presenting cells, particularly langerin-expressing cells, and that this induced significant adaptive immunity. Therefore, we think that this technology could be used to improve anticancer immunotherapies.

High-Throughput Synthesis, Analysis, and Optimization of Injectable Hydrogels for Protein Delivery.

The development of in situ-gelling hydrogels that can enable prolonged protein release is increasingly important due to the emergence of a growing number of protein-based therapeutics. Herein, we describe a high-throughput strategy to fabricate, characterize, and subsequently optimize hydrazone-cross-linked in situ-gelling hydrogels for protein delivery. Hydrogels are fabricated using an automated high-throughput robot to mix a variety of thermoresponsive, nonthermoresponsive, charged, neutral, naturally sourced, and synthetic polymers functionalized with hydrazide or aldehyde groups, generating in situ-gelling hydrogels with well-defined compositions within a 96-well plate. High-throughput characterization strategies are subsequently developed to enable on-plate analysis of hydrogel swelling, mechanics, degradation, transparency, and protein (ovalbumin) release kinetics that yield results consistent with those collected using traditional bulk hydrogel analysis techniques. Dynamic regression and latent variable modeling are then applied to fit performance statistics to the collected data set; subsequently, numerical optimization is used to identify mixtures of precursor polymers that exhibit targeted combinations of minimal burst release, maximum total protein release, minimum release rate, and maximum transparency (the latter of particular relevance for ophthalmic protein delivery applications). Given the rapid throughput of the protocols developed (i.e., 126 hydrogels can be synthesized and screened in quadruplicate within hours), this approach offers particular promise for accelerating the identification of injectable hydrogel compositions relevant for both protein delivery as well as other biomedical applications for which clearly predefined materials properties are required.

Aspirin enhances sensitization to the egg-white allergen ovalbumin in rats.

Enhancement of oral absorption of food allergens by non-steroidal anti-inflammatory drugs (NSAIDs), especially aspirin, is considered an exacerbating factor in the development of food allergies. In this study, we examined the effect of aspirin on oral sensitization to and absorption of the egg-white allergen ovalbumin (OVA) in rats. The absorption of OVA was evaluated by measuring the plasma concentration of OVA after oral administration by gavage. To evaluate oral sensitization to OVA, plasma levels of immunoglobulin (Ig) E and IgG1 antibodies (Abs) specific to OVA were determined by enzyme-linked immunosorbent assay after initiation of sensitization. High-dose aspirin (30 mg/kg) increased oral OVA absorption and plasma levels of OVA-specific IgE and IgG1 Abs compared with those observed in vehicle-treated rats. In contrast, low-dose aspirin (3 mg/kg) exerted no changes in either absorption or sensitization. Spermine, an absorption enhancer, increased the oral absorption of OVA to nearly the same extent as high-dose aspirin, whereas the plasma levels of OVA-specific IgE and IgG1 Abs exhibited no significant differences between spermine- and vehicle-treated rats. Among the NSAIDs, diclofenac and indomethacin increased sensitization to OVA, similar to high-dose aspirin, but meloxicam exerted no effects on Ab levels. In conclusion, we showed that high-dose aspirin enhanced oral sensitization to OVA. Our study suggests that enhanced oral sensitization to OVA cannot be ascribed to increased absorption of OVA from the intestinal tract. Although the mechanisms underlying this enhancement of sensitization are still controversial, our study suggests that modification of cytokine production due to impairment of the intestinal barrier function and inhibition of cyclooxygenase-1 activity by aspirin may be involved.

One-pot synthesis and characterization of ovalbumin-conjugated gold nanoparticles: A comparative study of adjuvanticity against the physical mixture of ovalbumin and gold nanoparticles.

Only few adjuvants are licensed for use in humans and there is a need to develop safe and improved vaccine adjuvants. In this study, we report the one-pot synthesis of antigen ovalbumin (OVA)-conjugated gold nanoparticles (OVA@GNPs). A systematical study was performed by comparing OVA@GNPs with the simple mixture of OVA and gold nanoparticles (OVA+GNPs), including their physiochemical properties through spectrometric and electrophoretic analysis, in vitro stability, cytotoxicity and cellular uptake, and in vivo humoral immune responses following subcutaneous and transcutaneous immunization in mice. The results demonstrate a much stronger interaction between protein and GNPs in OVA@GNPs than OVA+GNPs, which makes OVA@GNPs more stable under in vitro conditions than OVA+GNPs with the ability to induce 4 times higher OVA-specific serum IgG titers following subcutaneous immunization. We also show the dose sparing of OVA@GNPs, as the dosage for aluminum adjuvant required to reach to an equivalent OVA-specific antibody titer was almost five times higher than OVA@GNPs. However, we found that the co-administration of small-sized GNPs had a limited ability for the transcutaneous delivery of OVA. These results demonstrate the potential application of one-pot synthesis approach for producing antigen protein-conjugated gold nanoparticles for vaccine delivery.

Hyaluronan-based dissolving microneedles with high antigen content for intradermal vaccination: Formulation, physicochemical characterization and immunogenicity assessment.

The purpose of this study was to optimize the manufacturing of dissolving microneedles (dMNs) and to increase the antigen loading in dMNs to investigate the effect on their physicochemical properties. To achieve this, a novel single-array wells polydimethylsiloxane mold was designed, minimizing antigen wastage during fabrication and achieving homogeneous antigen distribution among the dMN arrays. Using this mold, hyaluronan (HA)-based dMNs were fabricated and tested for maximal ovalbumin (OVA) content. dMNs could be fabricated with an OVA:HA ratio as high as 1:1 (w/w), without compromising their properties such as shape and penetration into the ex vivo human skin, even after storage at high humidity and temperature. High antigen loading did not induce protein aggregation during dMN fabrication as demonstrated by complementary analytical methods. However, the dissolution rate in ex vivo human skin decreased with increasing antigen loading. About 2.7 µg OVA could be delivered in mice by using a single array with an OVA:HA ratio of 1:3 (w/w). Intradermal vaccination with dMNs induced an immune response similar as subcutaneous injection and faster than after hollow microneedle injection. In conclusion, results suggest that (i) the polydimethylsiloxane mold design has an impact on the manufacturing of dMNs, (ii) the increase in antigen loading in dMNs affects the microneedle dissolution and (iii) dMNs are a valid alternative for vaccine administration over conventional injection.

Direct CNS delivery of proteins using thermosensitive liposome-in-gel carrier by heterotopic mucosal engrafting.

Delivering therapeutics across the blood-brain barrier (BBB) for treating central nervous system (CNS) diseases is one of the biggest challenges today as the BBB limits the uptake of molecules greater than 500 Da into the CNS. Here we describe a novel trans-nasal mucosal drug delivery as an alternative to the intranasal drug delivery to overcome its limitations and deliver high molecular weight (HMW) therapeutics efficiently to the brain. This approach is based on human endoscopic skull base surgical techniques in which a surgical defect is repaired by engrafting semipermeable nasal mucosa over a skull base defect. Based on endoscopic skull based surgeries, our groups has developed a trans-nasal mucosal rodent model where we have evaluated the permeability of ovalbumin (45 kDa) as a model protein through the implanted mucosal graft for delivering HMW therapeutics to the brain. A thermo sensitive liposome-in-gel (LiG) system was developed for creating a drug depot allowing for a sustained release from the site of delivery to the brain through the implanted nasal graft. We would like to report this as an exploratory pilot study where we are using this novel surgical model to show that the implanted nasal mucosal graft and the LiG delivery system result in an efficient and a sustained brain delivery of HMW proteins. Hence, this study demonstrates that the trans-nasal mucosal engrafting technique could overcome the limitations for intranasal drug delivery and enable the uptake of HMW protein therapeutics into the CNS for the treatment of a wide range of neurodegenerative diseases.

The co-administration of proanthocyanidins and an obesogenic diet prevents the increase in intestinal permeability and metabolic endotoxemia derived to the diet.

The consumption of Westernized diets leads to hyperphagia and obesity, as well as intestinal alterations. In the present study, we evaluated the effect of the administration of a grape seed proanthocyanidin extract (GSPE) at different time points on the modulation of intestinal barrier function (intestinal permeability and metabolic endotoxemia), in rats with high-fat/high-carbohydrate diet-induced obesity. Animals were fed a cafeteria diet (CAF) supplemented with a preventive (PRE-CAF) or simultaneously intermittent (SIT-CAF) GSPE treatment (500 mg/kg bw). Changes in the plasma levels of an orally administered marker of intestinal permeability (ovalbumin, OVA), lipopolysaccharide (LPS) and tumor necrosis factor-α (TNF-α) were analyzed after animals were fed the obesogenic diet for 8, 12 and 17 weeks. In addition, ex vivo variations in transepithelial electrical resistance (TEER), the expression of tight junction (TJ) genes and the activity of myeloperoxidase (MPO) in the small and large intestines were monitored at the end of the experiment. The CAF diet increased OVA, LPS, MPO and TNF-α levels, accompanied by decreased TEER values in the small and large intestines. Interestingly, both GSPE treatments prevented these detrimental effects of the CAF diet, being the SIT-CAF group the most effective after 17 weeks of diet intervention. For the first time, this study provides evidence of the ameliorative effect of a proanthocyanidin extract, administered before or together with an obesogenic diet, on barrier dysfunction, as measured by intestinal permeability and metabolic endotoxemia.

Ovalbumin-containing core-shell implants suitable to obtain a delayed IgG1 antibody response in support of a biphasic pulsatile release profile in mice.

A single-injection vaccine formulation that provides for both a prime and a boost immunization would have various advantages over a multiple-injection regime. For such a vaccine formulation, it is essential that the booster dose is released after a certain, preferably adjustable, lag time. In this study we investigated whether a core-shell based implant, containing ovalbumin as core material and poly(DL-lactic-co-glycolic acid) of various monomer ratios as shell material can be used to obtain such a booster release. An in vitro release study showed that the lag time after which the ovalbumin was released from the core-shell implant increased with increasing lactic to glycolic acid ratio of the polymer and ranged from 3-6 weeks. Fluorescence spectroscopy showed minimal differences between native ovalbumin and ovalbumin from core-shell implants that were incubated until just before the observed in vitro release. In addition, mice immunized with a subcutaneous inserted core-shell implant containing ovalbumin showed an ovalbumin-specific IgG1 antibody response after a lag time of 4 or 6-8 weeks. Moreover, delayed release of ovalbumin caused higher IgG1 antibody titers than conventional subcutaneous vaccination with ovalbumin dissolved in PBS. Collectively, these findings could contribute to the further development of a single-injection vaccine, making multiple injections of the vaccine superfluous.

Polyethyleneimine modification of aluminum hydroxide nanoparticle enhances antigen transportation and cross-presentation of dendritic cells.

BACKGROUND: The aim of this study was to explore the feasibility of delivering tumor antigens and enhancing the antigen cross-presentation of dendritic cells (DCs) by aluminum hydroxide nanoparticle with polyethyleneimine (PEI) modification (LV@HPA/PEI). MATERIALS AND METHODS: The LV@HPA nanoparticles were modified by PEI first, then the influence of LV@HPA/PEI on DCs was examined. The distinct expression of ovalbumin (OVA) protein transported into DCs by LV@HPA/PEI was observed by flow cytometry and Western blot. The biocompatibility of LV@HPA/PEI, maturity and antigen cross-presentation of DCs was observed in vitro. Tumor derived autophagosomes (DRibbles) combined with LV@HPA/PEI were loaded into DCs, and DC vaccines were used to immunize mice. The percentage of CD3+CD8+IFN-γ+ T cells in immunized mice was determined by flow cytometry. Additionally, the functional properties of the LV@HPA/PEI-DRibble-DCs vaccine were examined in vivo in PancO2 tumor-bearing mice. RESULTS: In our study, we described how LV@HPA/PEI can be a functionalized antigen delivery system with notable antigen transport effect and negligible cytotoxicity. It was found that LV@HPA/PEI could be easily internalized into DCs to assist antigen release into the cytoplasm. In addition, DCs matured gradually after loading with LV@HPA/PEI-OVA, which increased significantly the cytokine IL-12 secretion and expression of surface molecules CD80 and CD86. Interestingly, DCs loaded with LV@HPA/PEI-DRibbles could promote the activation of tumor-specific T cells both in murine and in human T cells. In the following in vivo experiments, the vaccine of LV@HPA/PEI-DRibble-DCs significantly inhibited tumor growth and improved the survival rate of the PancO2 tumor-bearing mice. CONCLUSION: We established a high-performance anti-tumor vaccine of DCs loaded with LV@ HPA/PEI nanoparticles and tumor-associated antigens in autophagosomes (DRibbles), which could serve as a therapeutic strategy in cancer immunotherapy.

Protein delivery nanosystem of six-arm copolymer poly(ε-caprolactone)-poly(ethylene glycol) for long-term sustained release.

BACKGROUND: To address the issue of delivery of proteins, a six-arm copolymer, six-arm poly (ε-caprolactone)-poly(ethylene glycol) (6S-PCL-PEG), was synthesized by a simple two-step reaction. Thereafter, the application of 6S-PCL-PEG as a protein carrier was evaluated. MATERIALS AND METHODS: A six-arm copolymer, six-arm poly(ε-caprolactone) (6S-PCL), was synthesized by ring-opening polymerization, with stannous octoate as a catalyst and inositol as an initiator. Then, poly(ethylene glycol) (PEG) was linked with 6S-PCL by oxalyl chloride to obtain 6S-PCL-PEG. Hydrogen-1 nuclear magnetic resonance spectrum, Fourier-transform infrared spectroscopy, and gel-permeation chromatography were conducted to identify the structure of 6S-PCL-PEG. The biocompatibility of the 6S-PCL-PEG was evaluated by a cell counting kit-8 assay. Polymeric nanoparticles (NPs) were prepared by a water-in-oil-in-water double emulsion (W1/O/W2) solvent evaporation method. The size distribution and zeta potential of NPs were determined by dynamic light scattering. Transmission electron microscopy was used to observe the morphology of NPs. Drug-loading capacity, encapsulation efficiency, and the release behavior of ovalbumin (OVA)-loading NPs were tested by the bicinchoninic acid assay kit. The stability and activity of OVA released from NPs were detected and the uptake of NPs was evaluated by NIH-3T3 cells. RESULTS: All results indicated the successful synthesis of amphiphilic copolymer 6S-PCL-PEG, which possessed excellent biocompatibility and could formulate NPs easily. High drug-loading capacity and encapsulation efficiency of protein NPs were observed. In vitro, OVA was released slowly and the bioactivity of OVA was maintained for over 28 days. CONCLUSION: 6S-PCL-PEG NPs prepared in this study show promising potential for use as a protein carrier.

Development of PLGA nanoparticle loaded dissolving microneedles and comparison with hollow microneedles in intradermal vaccine delivery.

Skin is an attractive but also very challenging immunisation site for particulate subunit vaccines. The aim of this study was to develop hyaluronan (HA)-based dissolving microneedles (MNs) loaded with PLGA nanoparticles (NPs) co-encapsulating ovalbumin (OVA) and poly(I:C) for intradermal immunisation. The NP:HA ratio used for the preparation of dissolving MNs appeared to be critical for the quality of MNs and their dissolution in ex vivo human skin. Asymmetrical flow field-flow fractionation and dynamic light scattering were used to analyse the NPs released from the MNs in vitro. Successful release of the NPs depended on the drying conditions during MN preparation. The delivered antigen dose from dissolving MNs in mice was determined to be 1 µg OVA, in NPs or as free antigen, by using near-infrared fluorescence imaging. Finally, the immunogenicity of the NPs after administration of dissolving MNs (NP:HA weight ratio 1:4) was compared with that of hollow MN-delivered NPs in mice. Immunization with free antigen in dissolving MNs resulted in equally strong immune responses compared to delivery by hollow MNs. However, humoral and cellular immune responses evoked by NP-loaded dissolving MNs were inferior to those elicited by NPs delivered through a hollow MN. In conclusion, we identified several critical formulation parameters for the further development of NP-loaded dissolving MNs.

Design and immunological evaluation of anti-CD205-tailored PLGA-based nanoparticulate cancer vaccine.

The aim of this research was to develop a targeted antigen-adjuvant assembled delivery system that will enable dendritic cells (DCs) to efficiently mature to recognize antigens released from tumor cells. It is important to target the DCs with greater efficiency to prime T cell immune responses. In brief, model antigen, ovalbumin (OV), and monophosphoryl lipid A adjuvant were encapsulated within the nanoparticle (NP) by double emulsification solvent evaporation method. Targeted NPs were obtained through ligand incorporation via physical adsorption or chemical conjugation process. Intracellular uptake of the NPs and the maturation of DCs were evaluated with flow cytometry. Remarkably, the developed delivery system had suitable physicochemical properties, such as particle size, surface charge, OV encapsulation efficiency, biphasic OV release pattern, and safety profile. The ligand modified formulations had higher targeting efficiency than the non-tailored NPs. This was also evident when the targeted formulations expressed comparatively higher fold increase in surface activation markers such as CD40, CD86, and major histocompatibility complex class II molecules. The maturation of DCs was further confirmed through secretion of extracellular cytokines compared to control cells in the DC microenvironment. Physicochemical characterization of NPs was performed based on the polymer end groups, their viscosities, and ligand-NP bonding type. In conclusion, the DC stimulatory response was integrated to develop a relationship between the NP structure and desired immune response. Therefore, the present study narrates a comparative evaluation of some selected parameters to choose a suitable formulation useful for in vivo cancer immunotherapy.

Cell Penetrating Peptide-Based Redox-Sensitive Vaccine Delivery System for Subcutaneous Vaccination.

In immunotherapy, induction of potent cellular immunity by vaccination is essential to treat intracellular infectious diseases and tumors. In this work, we designed a new synthetic peptide carrier, Cys-Trp-Trp-Arg8-Cys-Arg8-Cys-Arg8-Cys, for vaccine delivery by integrating a redox-responsive disulfide bond cross-linking and cell-penetrating peptide arginine octamer. The carrier peptide bound to the antigen protein ovalbumin (OVA) via electrostatic self-assembly to form peptide/OVA nanocomposites. Then, the spontaneous oxidization of the thiols of the cysteine residues induced interpeptide disulfide bond cross-linking to construct denser peptide/OVA condensates. The cell-penetrating peptides incorporated in the carrier peptide could increase antigen uptake by antigen presenting cells. After being internalized by antigen presenting cells, the antigen could be rapidly released in cytoplasm along with degradation of the disulfide bonds by intracellular glutathione, which could promote potent CD8+ T cell immunity. The cross-linked peptide/OVA condensates were used for subcutaneous vaccination. The results showed that the peptide carrier mediated potent antigen-specific immune response by significantly increasing IgG titer; splenocyte proliferation; the secretion level of cytokines INF-γ, IL-12, IL-4, and IL-10; immune memory function, and the activation and maturation of dendritic cells. From the results, the low-molecular weight vaccine-condensing peptide with definite chemical composition could be developed as a novel class of vaccine delivery systems.

Synthesis and Characterisation of Photocrosslinked poly(ethylene glycol) diacrylate Implants for Sustained Ocular Drug Delivery.

PURPOSE: To investigate the sustained ocular delivery of small and large drug molecules from photocrosslinked poly(ethylene glycol) diacrylate (PEGDA) implants with varying pore forming agents. METHODS: Triamcinolone acetonide and ovalbumin loaded photocrosslinked PEGDA implants, with or without pore-forming agents, were fabricated and characterised for chemical, mechanical, swelling, network parameters, as well as drug release and biocompatibility. HPLC-based analytical methods were employed for analysis of two molecules; ELISA was used to demonstrate bioactivity of ovalbumin. RESULTS: Regardless of PEGDA molecular weight or pore former composition all implants loaded with triamcinolone acetonide released significantly faster than those loaded with ovalbumin. Higher molecular weight PEGDA systems (700 Da) resulted in faster drug release of triamcinolone acetonide than their 250 Da counterpart. All ovalbumin released over the 56-day time period was found to be bioactive. Increasing PEGDA molecular weight resulted in increased system swelling, decreased crosslink density (Ve), increased polymer-water interaction parameter (χ), increased average molecular weight between crosslinks (Mc) and increased mesh size (ε). SEM studies showed the porosity of implants increased with increasing PEGDA molecular weight. Biocompatibility showed both PEGDA molecular weight implants were non-toxic when exposed to retinal epithelial cells over a 7-day period. CONCLUSION: Photocrosslinked PEGDA implant based systems are capable of controlled drug release of both small and large drug molecules through adaptations in the polymer system network. We are currently continuing evaluation of these systems as potential sustained drug delivery devices.

Simple nanoliposomes encapsulating Lycium barbarum polysaccharides as adjuvants improve humoral and cellular immunity in mice.

The success of subunit vaccines has been hampered by the problems of weak or short-term immunity and the lack of availability of nontoxic, potent adjuvants. It would be desirable to develop safe and efficient adjuvants with the aim of improving the cellular immune response against the target antigen. In this study, the targeting and sustained release of simple nanoliposomes containing Lycium barbarum polysaccharides (LBP) as an efficacious immune adjuvant to improve immune responses were explored. LBP liposome (LBPL) with high entrapment efficiency (86%) were obtained using a reverse-phase evaporation method and then used to encapsulate the model antigen, ovalbumin (OVA). We demonstrated that the as-synthesized liposome loaded with OVA and LBP (LBPL-OVA) was stable for 45 days and determined the encapsulation stability of OVA at 4°C and 37°C and the release profile of OVA from LBPL-OVA was investigated in pH 7.4 and pH 5.0. Further in vivo investigation showed that the antigen-specific humoral response was correlated with antigen delivery to the draining lymph nodes. The LBPL-OVA were also associated with high levels of uptake by key dendritic cells in the draining lymph nodes and they efficiently stimulated CD4+ and CD8+ T cell proliferation in vivo, further promoting antibody production. These features together elicited a significant humoral and celluar immune response, which was superior to that produced by free antigen alone.

Enhancement of Skin Permeation and Skin Immunization of Ovalbumin Antigen via Microneedles.

The purpose of this study was to evaluate the use of different types of microneedles and doses of ovalbumin antigen for in vitro skin permeation and in vivo immunization. In vitro skin permeation experiments and confocal laser scanning microscopy revealed that hollow microneedles had a superior enhancing effect on skin permeation compared with a solid microneedle patch and untreated skin by efficiently delivering ovalbumin-fluorescein conjugate into the deep skin layers. The flux and cumulative amount of ovalbumin-fluorescein conjugate at 8 h after administering with various conditions could be ranked as follows: hollow MN; high dose > medium dose > low dose > MN patch; high dose > medium dose > low dose > untreated skin; high dose > medium dose > low dose > without ovalbumin-fluorescein conjugate. As the dose of ovalbumin-fluorescein conjugate was increased to 500 µg, the antigen accumulated in the skin to a greater extent, as evidenced by the increasing green fluorescence intensity. When the hollow microneedle was used for the delivery of ovalbumin into the skin of mice, it was capable of inducing a stronger immunoglobulin G immune response than conventional subcutaneous injection at the same antigen dose. Immunoglobulin G levels in the hollow MN group were 5.7, 11.6, and 13.3 times higher than those of the subcutaneous injection group for low, medium, and high doses, respectively. Furthermore, the mice immunized using the hollow microneedle showed no signs of skin infection or pinpoint bleeding. The results suggest that the hollow MN is an efficient device for delivering the optimal dose of antigen via the skin for successful immunization.