Computational modelling of survival of Aspergillus flavus in peanut kernels during hot air-assisted radio frequency pasteurization.

In recent years, radio frequency (RF) heating is getting popular as an alternative pasteurization method for agricultural commodities and low moisture foods. Computer simulation is an effective way to help understand RF interactions with food components and predict temperature distributions among food samples after RF treatments. In this study, a computer model based on Joule heating and thermal inactivation kinetic of A. flavus was established to predict both temperature distribution and microbial reduction among peanut kernels after RF processing. For the process validation, three 2-g peanut samples inoculated with 40 µL A. flavus were placed at three representative locations among 2.17 kg peanut kernels and subjected to various processing conditions in a 27.12 MHz, 6 kW RF heating unit together with hot air system. Results showed that the average difference of the sample temperature and microbial reduction between simulation and experiment was small with RMSE values of 0.009 °C and 0.012 °C, and 0.31 log CFU/g and 0.42 log CFU/g for peanut moisture contents of 7.56% and 12.02% w. b., respectively. Nonuniform RF heating resulted in the least lethality of A. flavus at the cold spot. The validated computer model was further used to estimate microbial reduction distributions at other target temperatures based on predicted temperature profiles. This computer model may help design the RF pasteurization protocols for peanut kernels without extensive experiments in food industry.

Thermal Inactivation of Hepatitis A Virus, Noroviruses, and Simian Rotavirus in Cows' Milk.

Consumption of raw or unpasteurized milk is a risk for the consumers because indirect contaminations such as fecal-cross-contamination could occur and determine the presence of enteric viruses. In this study, milk was treated with several temperature and time combinations chosen by performing a preliminary experiment to evaluate the intervals needed to inactivate Hepatitis A virus (HAV) HM175 strain, noroviruses genogroups I and II (GI and GII), and simian rotavirus SA11 at different temperatures. Results were obtained by measuring the genome copies and infectious units by real-time PCR and plaque assays respectively. At 85 °C, one minute and two minutes were needed to achieve 6.6 log10 ± 0.2 and 8 log10 ± 0 reductions of genome copies of HAV respectively. Similar genome copies reduction was also observed for noroviruses (GI and GII) and simian rotavirus. At higher temperatures, 90 s (s) at 90 °C and 60 s at 95 °C were needed to achieve 8 log10 ± 0 reductions of the genome copies of all studied viruses. Significant higher sensitivity of the infectious units of both HAV and simian rotavirus to heat treatment of milk than their genome copies was observed. At boiling point of milk (100.5 °C), 40 s were needed to achieve 8 log10 ± 0 reductions of genome copies of all the studied viruses, while 10 s were needed to achieve 6 log10 ± 0 reductions of the infectious units of HAV and simian rotavirus. Significant higher reduction of infectious units than genome copies was observed confirming that genome copies reduction does not correspond to infectious virus.

Characterization of the sensory, chemical, and microbial quality of microwave-assisted, thermally pasteurized fried rice during storage.

Companies producing ready-to-eat (RTE) meals are looking for processing alternatives that allow them to gain presence in the supermarket chill section. Microwave-assisted pasteurization systems (MAPS) offer the potential to produce safe, high-quality foods. This research examined sensory, physical, chemical, and microbial changes in fried rice processed with MAPS and stored at 7 °C over a 6-week storage period. Additional fried rice samples (cooked but not MAPS-processed) were stored at -31 °C and were used as the control. Randomly selected trays of each type of rice were analyzed at 1, 4, and 6 weeks of storage. Aroma, appearance, taste/flavor, texture, mouthfeel, and aftertaste were evaluated by a semitrained sensory panel with rate-all-that-apply questions. The type of rice treatment (MAPS or control) significantly influenced sensory attributes (P < 0.05), with firm texture attribute of the egg being more intense in the MAPS-rice compared to the control. In addition, storage time affected the sensory modalities of both rice samples, including aroma, appearance, and taste/flavor (P < 0.05). No spoilage-associated sensory attributes were detected in the MAPS-rice during storage. At each examination point, various physical, chemical, and microbial analyses were conducted for the MAPS- and control rice. From the physical and chemical perspective, the MAPS-rice did not present relevant changes over the period tested. Microbial growth was the main cause of spoilage of the MAPS-rice; however, MAPS was able to extend the regular 5-day shelf life of a chilled fried rice meal to 6 weeks, demonstrating the potential of this technology for the RTE industry. PRACTICAL APPLICATION: The findings of this study indicate that, by applying microwave technology to RTE fried rice, the shelf life can be extended from 5 to 7 days up to 42 days (6 weeks) when stored at 7 °C. This temperature closely mimics that of consumers' refrigerators in the United States. This study also shows the potential of working with a semitrained panel and RATA questions when characterizing sensory changes during storage.

Stability of vitamin C, color, and garlic aroma of garlic mashed potatoes in polymer packages processed with microwave-assisted thermal sterilization technology.

The U.S. Army and NASA need ready-to-eat meals with extended shelf-life for military operations and future manned space missions. For traditional heat sterilization methods, aluminum foil laminated pouches are used to achieve a shelf-life of 3 to 5 years at room temperature. However, those packages are not suited for advanced thermal processing technologies based on microwave energy. This research investigated the effect of polymeric packaging materials on storage stability of garlic flavor, vitamin C, and color of garlic mashed potatoes processed with microwave-assisted thermal sterilization (MATS) technology. Three types of high-barrier metal oxide-coated polymer pouches were used for MATS process, designed to achieve lethality approximately F0 = 6 min. Aluminum foil-based pouches were used for retort process as control. Results demonstrated that both oxygen and water vapor barrier properties (oxygen transmission rate [OTR] and water vapor transmission rate [WVTR]) of the polymer pouches were affected by MATS processing. OTR increased by three to nine times, while WVTR increased by 5 to 20 times after processing. The MATS process resulted in 13% to 16% vitamin C loss, while retort process resulted in 18% loss in garlic mashed potato. The kinetics of vitamin C indicated that metal oxide-coated high-barrier packages (after processing OTR <0.1 cc/m2 .day; WVTR <1.0 g/m2 .day) could replace aluminum foil-based pouches for MATS processed shelf-stable ready-to-eat garlic mashed potatoes. PRACTICAL APPLICATION: Garlic mashed potatoes in polymer packages processed in a microwave-assisted thermal sterilization (MATS) system had better retention of vitamin C compared to samples packaged in aluminum laminated pouches and processed in retort. Polymer packages combined with MATS processing could potentially provide safe, better quality, and nutritious shelf-stable food products for military and space missions.

Assessment of the Feasibility and Acceptability of Using Water Pasteurization Indicators to Increase Access to Safe Drinking Water in the Peruvian Amazon.

Approximately two billion people lack access to microbiologically safe drinking water globally. Boiling is the most popular household water treatment method and significantly reduces diarrheal disease, but is often practiced inconsistently or ineffectively. The use of low-cost technologies to improve boiling is one approach with potential for increasing access to safe drinking water. We conducted household trials to evaluate the feasibility and acceptability of water pasteurization indicators (WAPIs) in the Peruvian Amazon in 2015. A total of 28 randomly selected households were enrolled from a rural and a peri-urban community. All households trialed two WAPI designs, each for a 2-week period. Ninety-six percent of participants demonstrated the correct use of the WAPIs at the end of each trial, and 88% expressed satisfaction with both WAPI models. Ease of use, short treatment time, knowledge of the association between WAPI use and improved health, and the taste of treated water were among the key factors that influenced acceptability. Ease of use was the key factor that influenced design preference. Participants in both communities preferred a WAPI with a plastic box that floated on the water's surface compared with a WAPI with a wire that was dipped into the pot of drinking water while it was heating (77% versus 15%, P < 0.001); we selected the box design for a subsequent randomized trial of this intervention. The high feasibility and acceptability of the WAPIs in this study suggest that these interventions have potential to increase access to safe water in resource-limited settings.

Evaluation of structural changes and intracellular substance leakage of Escherichia coli O157:H7 induced by ohmic heating.

AIMS: To investigate the effects of ohmic heating (OH) and water bath heating (WB) on the membrane permeability, membrane structure, intracellular organization and leakage of intracellular substances of Escherichia coli O157:H7 at the same inactivation level and at a heating temperature of 72°C. METHODS AND RESULTS: Flow cytometry analysis indicated that membrane permeability of E. coli O157:H7 by OH was comparable to WB at 72°C. Scanning electron microscopy analysis showed that the OH-treated E. coli O157:H7 had greater morphological changes than those of WB-treated ones both at the same inactivation level and the same heating temperature. Transmission electron microscopy analysis showed that both OH and WB caused severe damage on the intracellular organization of E. coli O157:H7 at 72°C. Moreover, OH-treated E. coli O157:H7 had more leakage of intracellular substances than those treated with WB due to the electroporation caused by OH. CONCLUSION: OH presents considerable potential in inactivation of E. coli O157:H7, especially OH at 10 V cm-1 with a much shorter heating time. SIGNIFICANCE AND IMPACT OF THE STUDY: The nonthermal effect of OH had a greater effect on the cell membrane of E. coli O157:H7, resulting in more pores and more leakage of intracellular substances out of the E. coli O157:H7 cells. These results could promote the application of OH in food processing.

Application of microwave and ohmic heating for pasteurization of cantaloupe juice: microbial inactivation and chemical properties.

BACKGROUND: Cantaloupe melon (Cucumis melo L.) is one of the most important dessert fruits and is cultivated in many countries of the world. The effects of microwave (400 and 800 W for 110 s), ohmic (100 and 200 V for 110 s) and conventional heating (27-75 °C for 30 min) treatments on inactivation of Escherichia coli, Salmonella Typhimurium, S. Enteritidis and Staphylococcus aureus pathogens; pH and degradation of vitamin C, ß-carotene and phenolic compounds of cantaloupe juice were investigated. RESULTS: As time passed, all of the treatments resulted in significant (P ≤ 0.05) decreases in the number of pathogens and vitamin C, ß-carotene and phenolic compound content, whereas the pH of samples did not show significant changes. The mentioned parameters were more reduced by increasing the power, voltage and temperature of ohmic, microwave and conventional heating treatments, respectively. Comparison of the results for conventional heating with those of ohmic and microwave heating revealed that the complete inactivation time of pathogens by the two latter treatments was much shorter than that of the former. After 20 s, the effect of ohmic heating at 200 V on decreasing vitamin C content was significantly (P ≤ 0.05) higher than that of the other treatments. The amounts of ß-carotene and phenolic compounds showed the most reduction under 800 W microwave treatment. CONCLUSION: The results obtained for conventional, ohmic and microwave heating treatments indicated a higher degradation of ß-carotene and phenolic compounds and a lower loss of vitamin C in the former. © 2019 Society of Chemical Industry.

Inactivation of the microbiota and effect on the quality attributes of pineapple juice using a continuous flow ultrasound-assisted supercritical carbon dioxide system.

Supercritical carbon dioxide inactivation technology represents a promising nonthermal processing method, as it causes minimum impact on the nutritional food properties. The aim of this study was to analyze the combined effect of supercritical carbon dioxide and high-power ultrasound on the inactivation of natural microbiota and the quality attributes of pineapple juice treated in a continuous flow system. Different juice residence times (3.06-4.6 min), at 100 bar and 31.5 ℃, were used. The results indicated that the microbiota inactivation was complete and the differences obtained in the quality attributes (2.2% for pH, 4.8% for °Brix, 2% for vitamin C) were minimal. During storage, microorganisms were not able to recover and the vitamin C decrease could be limited to 8.2% after four weeks. The results demonstrated that the supercritical carbon dioxide-high-power ultrasound technique could be an excellent alternative for the cold pasteurization of pineapple juice.

Development of a versatile high-temperature short-time (HTST) pasteurization device for small-scale processing of cell culture medium formulations.

The compatibility of CHO cell culture medium formulations with all stages of the bioprocess must be evaluated through small-scale studies prior to scale-up for commercial manufacturing operations. Here, we describe the development of a bespoke small-scale device for assessing the compatibility of culture media with a widely implemented upstream viral clearance strategy, high-temperature short-time (HTST) treatment. The thermal stability of undefined medium formulations supplemented with soy hydrolysates was evaluated upon variations in critical HTST processing parameters, namely, holding times and temperatures. Prolonged holding times of 43 s at temperatures of 110 °C did not adversely impact medium quality while significant degradation was observed upon treatment at elevated temperatures (200 °C) for shorter time periods (11 s). The performance of the device was benchmarked against a commercially available mini-pilot HTST system upon treatment of identical formulations on both platforms. Processed medium samples were analyzed by untargeted LC-MS/MS for compositional profiling followed by chemometric evaluation, which confirmed the observed degradation effects caused by elevated holding temperatures but revealed comparable performance of our developed device with the commercial mini-pilot setup. The developed device can assist medium optimization activities by reducing volume requirements relative to commercially available mini-pilot instrumentation and by facilitating fast throughput evaluation of heat-induced effects on multiple medium lots.

Flavor and flavor chemistry differences among milks processed by high-temperature, short-time pasteurization or ultra-pasteurization.

Typical high-temperature, short-time (HTST) pasteurization encompasses a lower heat treatment and shorter refrigerated shelf life compared with ultra-pasteurization (UP) achieved by direct steam injection (DSI-UP) or indirect heat (IND-UP). A greater understanding of the effect of different heat treatments on flavor and flavor chemistry of milk is required to characterize, understand, and identify the sources of flavors. The objective of this study was to determine the differences in the flavor and volatile compound profiles of milk subjected to HTST, DSI-UP, or IND-UP using sensory and instrumental techniques. Raw skim and raw standardized 2% fat milks (50 L each) were processed in triplicate and pasteurized at 78°C for 15 s (HTST) or 140°C for 2.3 s by DSI-UP or IND-UP. Milks were cooled and stored at 4°C, then analyzed at d 0, 3, 7, and 14. Sensory attributes were determined using a trained panel, and aroma active compounds were evaluated by solid-phase micro-extraction or stir bar sorptive extraction followed by gas chromatography-mass spectrometry, gas chromatography-olfactometry, and gas chromatography-triple quad mass spectrometry. The UP milks had distinct cooked and sulfur flavors compared with HTST milks. The HTST milks had less diversity in aroma active compounds compared with UP milks. Flavor intensity of all milks decreased by d 14 of storage. Aroma active compound profiles were affected by heat treatment and storage time in both skim and 2% milk. High-impact aroma active compounds were hydrogen sulfide, dimethyl trisulfide, and methional in DSI-UP and 2 and 3-methylbutanal, furfural, 2-heptanone, 2-acetyl-1-pyrroline, 2-aminoacetophenone, benzaldehyde, and dimethyl sulfide in IND-UP. These results provide a foundation knowledge of the effect of heat treatments on flavor development and differences in sensory quality of UP milks.

Effect of the PiAstra Benchtop Flash-Heating Pasteurizer on Immune Factors of Donor Human Milk.

INTRODUCTION: PiAstra is a simulated flash-heat (FH) pasteurization temperature monitoring system designed using Raspberry Pi technology for the pasteurization of human milk. This study analyzed the effect of the PiAstra FH method on human milk immune components (immunoglobulin A [IgA] and lactoferrin activity). METHODS: Donor milk samples (N = 45) were obtained from a human milk bank, and pasteurized. Concentrations of IgA and lactoferrin activity were compared to their unpasteurized controls using the Student's t test. RESULTS: The PiAstra FH method retained 34.2% of IgA (p < 0.0001) and 40.4% of lactoferrin activity (p < 0.0001) when compared to unpasteurized controls. The retention of IgA by the PiAstra is similar to previous FH studies, while retention of lactoferrin activity was higher than previous FH studies. DISCUSSION: The high-technology, low-cost PiAstra system, which is able to retain vital immune components of human milk, provides safe donor milk for low-resourced settings. This enables the use of pasteurized donor milk when human milk is not available, potentially saving vulnerable infant lives.

Effect of high-pressure-jet processing on the viscosity and foaming properties of pasteurized whole milk.

The processing of milk using high-pressure technologies has been shown to dissociate casein micelles, denature whey proteins, and change the appearance and rheological properties of milk. A novel high-pressure processing technology called high-pressure-jet (HPJ) processing is currently being investigated for use in the food industry. Few studies have evaluated the effects of HPJ technology on dairy foods. The present study investigated the physicochemical and foaming properties of homogenized pasteurized whole milk processed at pressures from 0 to 500 MPa using HPJ processing. The apparent particle size exhibited a monomodal distribution in whole milk samples processed up to 125 MPa and a bimodal distribution for samples processed at 250, 375, and 500 MPa. The viscosity increased from approximately 2 to 5 mPa·s when whole milk was processed using HPJ at 375 MPa, and foam expansion increased from approximately 80 to 140% after processing at >125 MPa. Foam stability was limited to pressures in the 375 to 500 MPa range. We hypothesized that the increase in apparent particle size was due to the dissociation of casein micelles into surface-active casein protein monomers, and the formation of casein-casein and casein-fat particles. Ultracentrifugation of samples into 3 milk fractions (supernatant, serum, and precipitate), and subsequent fat and protein analysis on the 3 fractions, showed that a strong interaction between casein proteins and fat triglycerides occurred, evidenced by the increase in fat content associated with the precipitate fraction with increasing pressure. This suggests that stable casein-fat aggregates are formed when whole milk is processed using HPJ at pressure >125 MPa.

Short communication: A comparison of biofilm development on stainless steel and modified-surface plate heat exchangers during a 17-h milk pasteurization run.

Flow of milk through the plate heat exchanger (PHE) results in denaturation of proteins, resulting in fouling. This also accelerates bacterial adhesion on the PHE surface, eventually leading to the development of biofilms. During prolonged processing, these biofilms result in shedding of bacteria and cross-contaminate the milk being processed, thereby limiting the duration of production runs. Altering the surface properties of PHE, such as surface energy and hydrophobicity, could be an effective approach to reduce biofouling. This study was conducted to compare the extent of biofouling on native stainless steel (SS) and modified-surface [Ni-P-polytetrafluoroethylene (PTFE)] PHE during the pasteurization of raw milk for an uninterrupted processing run of 17 h. For microbial studies, raw and pasteurized milk samples were aseptically collected from inlets and outlets of both PHE at various time intervals to examine shedding of bacteria in the milk. At the end of the run, 3M quick swabs (3M, St. Paul, MN) and ATP swabs (Charm Sciences Inc., Lawrence, MA) were used to sample plates from different sections of the pasteurizers (regeneration, heating, and cooling) for biofilm screening and to estimate the efficiency of cleaning in place, respectively. The data were tested for ANOVA, and means were compared. Modified PHE experienced lower mesophilic and thermophilic bacterial attachment and biofilm formation (average log 1.0 and 0.99 cfu/cm2, respectively) in the regenerative section of the pasteurizer compared with SS PHE (average log 1.49 and 1.47, respectively). Similarly, higher relative light units were observed for SS PHE compared with the modified PHE, illustrating the presence of more organic matter on the surface of SS PHE at the end of the run. In addition, at h 17, milk collected from the outlet of SS PHE showed plate counts of 5.44 cfu/cm2, which were significantly higher than those for pasteurized milk collected from modified PHE (4.12 log cfu/cm2). This provided further evidence in favor of the modified PHE achieving better microbial quality of pasteurized milk in long process runs. Moreover, because cleaning SS PHE involves an acid treatment step, whereas an alkali treatment step is sufficient for the modified-surface PHE, use of the latter is both cost and time effective, making it a better surface for thermal processing of milk and other fluid dairy products.

An Exploration into the Bacterial Community under Different Pasteurization Conditions during Substrate Preparation (Composting-Phase II) for Agaricus bisporus Cultivation.

Substrate preparation (i.e., composting) for Agaricus bisporus cultivation is the most critical point of mushroom production. Among many factors involved in the composting process, the microbial ecology of the system is the underlying drive of composting and can be influenced by composting management techniques. Pasteurization temperature at the beginning of phase II, in theory, may influence the bacterial community and subsequently the "selectivity" and nutrition of the final substrate. Therefore, this hypothesis was tested by simulation in bioreactors under different pasteurization conditions (57 °C/6 h, 60 °C/2 h, and 68 °C/2 h), simulating conditions adopted by many producers. Bacterial diversity, based on 16S ribosomal RNA obtained by high-throughput sequencing and classified in operational taxonomic units (OTUs), was greater than previously reported using culture-dependent methods. Alpha diversity estimators show a lower diversity of OTUs under a high-temperature pasteurization condition. Bacillales order shows a relatively higher OTU abundance under a high-pasteurization temperature, which also was related to high ammonia emission measurements. On the other hand, beta diversity analysis showed no significantly changes in the bacterial community structure under different conditions. Agaricus bisporus mycelium growth during a standard spawn run period was significantly slower in the compost pasteurized at high temperature. Since the bacterial community structure was not greatly affected by different pasteurization conditions but by-products left (e.g., ammonia) at the end of compost conditioning varied, further studies need to be conducted to determine the functional role of the microbial communities found during substrate preparation for Agaricus bisporus cultivation.

A 100-Year Review: A century of dairy processing advancements-Pasteurization, cleaning and sanitation, and sanitary equipment design.

Over the past century, advancements within the mainstream dairy foods processing industry have acted in complement with other dairy-affiliated industries to produce a human food that has few rivals with regard to safety, nutrition, and sustainability. These advancements, such as milk pasteurization, may appear commonplace in the context of a modern dairy processing plant, but some consideration of how these advancements came into being serve as a basis for considering what advancements will come to bear on the next century of processing advancements. In the year 1917, depending on where one resided, most milk was presented to the consumer through privately owned dairy animals, small local or regional dairy farms, or small urban commercial dairies with minimal, or at best nascent, processing capabilities. In 1917, much of the retail milk in the United States was packaged and sold in returnable quart-sized clear glass bottles fitted with caps of various design and composition. Some reports suggest that the cost of that quart of milk was approximately 9 cents-an estimated $2.00 in 2017 US dollars. Comparing that 1917 quart of milk to a quart of milk in 2017 suggests several differences in microbiological, compositional, and nutritional value as well as flavor characteristics. Although a more comprehensive timeline of significant processing advancements is noted in the AppendixTable A1 to this paper, we have selected 3 advancements to highlight; namely, the development of milk pasteurization, cleaning and sanitizing technologies, and sanitary specifications for processing equipment. Finally, we provide some insights into the future of milk processing and suggest areas where technological advancements may need continued or strengthened attention and development as a means of securing milk as a food of high safety and value for the next century to come.

Stability of color in Spanish-style green table olives pasteurized and stored in plastic containers.

BACKGROUND: There is an increasing interest in the use of pasteurizable plastic packaging by the olive industry. In order to investigate the change from traditional glass or varnished can containers to plastic packaging, the proper plastic material that is compatible with fermented olives while maintaining color quality during pasteurization treatment and storage must be selected. This work is focused on color stability in two distinct pasteurizable plastic containers with different oxygen permeability. RESULTS: In PET + MDPE/EVOH (polyethylene terephthalate + medium-density polyethylene/ethylene vinyl alcohol) pouches, pasteurization provoked severe browning which drastically decreased their color shelf life (<6 weeks). However, this browning did not occur in the unpasteurized product without preservatives owing to the presence of microorganisms. In AlOx-coated PET + MDPE (aluminum oxide coating on polyethylene terephthalate + medium-density polyethylene) pouches, color changes were small or negligible throughout storage, especially if ascorbic acid was added to the packing solution (shelf life > 6.5 months). CONCLUSION: The plastic material had a significant effect on the retention of color of the pasteurized product. The use of AlOx-coated PET + MDPE pouches could be an alternative to traditional packaging for the pasteurization and storage of Spanish-style green olives from a color quality standpoint. © 2017 Society of Chemical Industry.

High-temperature short-time pasteurisation of human breastmilk is efficient in retaining protein and reducing the bacterial count.

AIM: Milk banks are advised to use Holder pasteurisation to inactivate the cytomegalovirus, but the process adversely affects the bioactive properties of human breastmilk. This study explored the antibacterial efficacy of an alternative high-temperature short-time (HTST) treatment of human breastmilk and its effect on marker proteins, compared with the Holder method. METHODS: Breastmilk samples were obtained from 27 mothers with infants in a German neonatal intensive care unit. The samples were either heated to 62°C for five seconds using HTST or processed using Holder pasteurisation, at 63 ± 0.5°C for 30 minutes. Immunoglobulin A, lactoferrin, lysozyme, alkaline phosphatase and bile salt-stimulated lipase concentrations and bacterial colony-forming units/mL were measured before and after heating. RESULTS: HTST-treated samples retained higher rates of immunoglobulin A (95% versus 83%), alkaline phosphatase (6% versus 0%) and bile salt-stimulated lipase (0.8% versus 0.4%) than Holder pasteurisation samples (all p < 0.01), but not lactoferrin (32% versus 20%, p = 0.18) and lysozyme (72% versus 65%, p = 1). No difference in antibacterial efficacy was noted between the two groups (p = 0.29). CONCLUSION: Using the HTST treatment protocol retained some of the bioactive properties of human breastmilk and appeared to have similar antibacterial efficacy to Holder pasteurisation.

Comparative analysis of solar pasteurization versus solar disinfection for the treatment of harvested rainwater.

BACKGROUND: Numerous pathogens and opportunistic pathogens have been detected in harvested rainwater. Developing countries, in particular, require time- and cost-effective treatment strategies to improve the quality of this water source. The primary aim of the current study was thus to compare solar pasteurization (SOPAS; 70 to 79 °C; 80 to 89 °C; and ≥90 °C) to solar disinfection (SODIS; 6 and 8 hrs) for their efficiency in reducing the level of microbial contamination in harvested rainwater. The chemical quality (anions and cations) of the SOPAS and SODIS treated and untreated rainwater samples were also monitored. RESULTS: While the anion concentrations in all the samples were within drinking water guidelines, the concentrations of lead (Pb) and nickel (Ni) exceeded the guidelines in all the SOPAS samples. Additionally, the iron (Fe) concentrations in both the SODIS 6 and 8 hr samples were above the drinking water guidelines. A >99% reduction in Escherichia coli and heterotrophic bacteria counts was then obtained in the SOPAS and SODIS samples. Ethidium monoazide bromide quantitative polymerase chain reaction (EMA-qPCR) analysis revealed a 94.70% reduction in viable Legionella copy numbers in the SOPAS samples, while SODIS after 6 and 8 hrs yielded a 50.60% and 75.22% decrease, respectively. Similarly, a 99.61% reduction in viable Pseudomonas copy numbers was observed after SOPAS treatment, while SODIS after 6 and 8 hrs yielded a 47.27% and 58.31% decrease, respectively. CONCLUSION: While both the SOPAS and SODIS systems reduced the indicator counts to below the detection limit, EMA-qPCR analysis indicated that SOPAS treatment yielded a 2- and 3-log reduction in viable Legionella and Pseudomonas copy numbers, respectively. Additionally, SODIS after 8 hrs yielded a 2-log and 1-log reduction in Legionella and Pseudomonas copy numbers, respectively and could be considered as an alternative, cost-effective treatment method for harvested rainwater.

Pilot-scale radio frequency pasteurisation of chili powder: heating uniformity and heating model.

BACKGROUND: Microbial contamination is a vital obstacle needed to overcome for food safety of condiments. Radio frequency (RF) pasteurisation is a new technology to solve this obstacle. Temperature distribution and heating uniformity of sample, which are influenced by different factors, are the most important things affecting the nutritional ingredients and microbial safety of sample in the process of RF pasteurisation. This study demonstrated the location of cold spot in chili powder by analysing temperature distribution in horizontal and vertical direction. The related models were established and the accuracy was verified. RESULTS: Cold spot located on the centre of sample surface in the process of RF pasteurisation. The averaged temperature of sample increased linearly. The uniformity index decreased as the averaged temperature increased. Both the correlation coefficient of two equations were greater than 0.91. The error value of heating rate and heating uniformity index was 0.54% and 0.75% between the measured value and predicted value. CONCLUSION: Electric field was not uniformly distributed between RF parallel-plate electrodes in the RF pasteurisation of chili powder. The heating models were reliable to predict experiment results with high precision and accuracy. © 2015 Society of Chemical Industry.

Barosensitivity in Saccharomyces cerevisiae is Closely Associated with a Deletion of the COX1 Gene.

High hydrostatic pressure causes physical stress to microorganisms; therefore, this technology may be applied to food pasteurization without introducing the unfavorable effects of thermal denaturation. However, its application is limited to high-value foods because the treatment requires a robust steel vessel and expensive pressurization equipment. To reduce these costs, we studied the pasteurization of Saccharomyces cerevisiae using relatively moderate high-pressure levels. A mutant strain isolated by ultraviolet mutagenesis showed significant loss of viability under high-pressure conditions. Gene expression analysis of the mutant strain revealed that it incurred a deletion of the COX1 gene. Our results suggest that the pressure-sensitivity can readily be introduced into industrial/food microorganisms by complementing a COX1 deleted mitochondria.