The study of three beaches of South-West Cameroon polluted by polycyclic aromatic hydrocarbons.

The US Environmental Protection Agency (US-EPA) published a priority list of 16 polycyclic aromatic hydrocarbons (PAHs), which are compounds that are studied in a variety of matrices due to their wide range of risks. Environmental compartments can be contaminated with PAHs from different sources, such as wastewater from industries and petroleum spills. For the case of Cameroon, there are no recorded data concerning the sources, distributions, and toxicity levels of PAHs in water and sediment from Cameroon beaches which are found in South-West, Littoral, and South Regions. In this work, only three beaches from South-West Region were studied regarding the sources, distributions, and toxicity levels of PAHs in water and sediment. The analyzed samples came from Bobende coastal beach, Down-beach, and Cape-Limboh beach. To achieve the analyses, liquid-liquid extraction and gas chromatography enabled the identification and quantification of PAH compounds from sediments and marine water. Out of the 16 PAHs listed by US-EPA, twelve were identified and quantified among which four of them were light molecular weight PAHs (acenaphthylene, fluorene, phenanthrene, and anthracene). Anthracene in the Cape-Limboh sample presented the highest concentration (477.57 ng/kg weight of dry sediment) of LMW-PAHs. Eight identified and quantified PAHs of high molecular weight as a whole, three absent PAHs (benzo[a]anthracene, dibenzo[a,h]anthracene, and benzo[g,h,i]perylene) in the Cape-Limboh sample, while only one is absent in the Bobende samples (dibenzo[a,h]anthracene) and Down Beach (benzo[g,h,i]perylene). According to the ratios used for the determination of the sources of PAHs, it came out that the source of PAHs from all beaches is pyrolytic. In all samples, BaA is the only high molecular weight PAH presenting serious toxicity and ecological risk.

Perylene diimide-POSS network for semi selective solid-phase microextraction of lung cancer biomarkers in exhaled breath.

Lung cancer (LC) is the leading cause of cancer mortality so, the analysis of exhaled human breath has great significance for early non-invasive diagnosis. Poor selectivity and strong humidity are two bottlenecks for the application of gas sensors to exhaled breath analysis. The development of novel extractive phases for the analysis of exhaled breath by chromatography is therefore a lucrative object. Polyhedral oligomeric silsesquioxanes (POSS) are among the 3D porous materials whose unique properties make them promising coatings for solid-phase microextraction (SPME). Selective enrichment of polar or nonpolar targets depends on the pore size and functional groups on the POSSs. Herein, we disclosed 3D network of POSS-naphthalene diimide (POSS-NDI) and perylene diimide (POSS-PDI) as extractive phases for analysis of lung cancer biomarkers with the capability of capturing different volatile organic compounds (VOCs). The synthesized diimides were fully characterized by FT-IR, multinuclear NMR, SEM, TEM, TGA, and BET analysis. After optimization of all the influential parameters on sorption/desorption, figures of merit for three aldehydes as biomarkers of LC were obtained. The exhaled breath of twelve participants including seven healthy candidates and five cases with LC were examined. The partial least squares-discriminant analysis (PLS-DA) was implemented which led to the proper classification of healthy and LC patients with R2 calibration and cross-validation of 0.9738 and o.7882, respectively.

The signaling role of extracellular ATP in co-culture of Shiraia sp. S9 and Pseudomonas fulva SB1 for enhancing hypocrellin A production.

BACKGROUND: Adenosine 5'-triphosphate (ATP) plays both a central role as an intracellular energy source, and a crucial extracellular signaling role in diverse physiological processes of animals and plants. However, there are less reports concerning the signaling role of microbial extracellular ATP (eATP). Hypocrellins are effective anticancer photodynamic therapy (PDT) agents from bambusicolous Shiraia fungi. The co-culture of Shiraia sp. S9 and a bacterium Pseudomonas fulva SB1 isolated from Shiraia fruiting bodies was established for enhanced hypocrellin A (HA) production. The signaling roles of eATP to mediate hypocrellin biosynthesis were investigated in the co-culture. RESULTS: The co-culture induced release of eATP at 378 nM to the medium around 4 h. The eATP release was interdependent on cytosolic Ca2+ concentration and reactive oxygen species (ROS) production, respectively. The eATP production could be suppressed by the Ca2+ chelator EGTA or abolished by the channel blocker La3+, ROS scavenger vitamin C and NADPH oxidase inhibitor diphenyleneiodonium chloride (DPI). The bacterium-induced H2O2 production was strongly inhibited by reactive blue (RB), a specific inhibitor of membrane purinoceptors, but dependent on the induced Ca2+ influx in the co-culture. On the other hand, the application of exogenous ATP (exATP) at 10-300 µM to Shiraia cultures also promoted fungal conidiation and HA production, both of which were blocked effectively by the purinoceptor inhibitors pyridoxalphosphate-6-azophenyl-2', 4'-disulfonic acid (PPADS) and RB, and ATP hydrolase apyrase. Both the induced expression of HA biosynthetic genes and HA accumulation were inhibited significantly under the blocking of the eATP or Ca2+ signaling, and the scavenge of ROS in the co-culture. CONCLUSIONS: Our results indicate that eATP release is an early event during the intimate bacterial-fungal interaction and eATP plays a signaling role in the bacterial elicitation on fungal metabolites. Ca2+ and ROS are closely linked for activation of the induced ATP release and its signal transduction. This is the first report on eATP production in the fungal-bacterial co-culture and its involvement in the induced biosynthesis of fungal metabolites.

Enhanced cercosporin production by co-culturing Cercospora sp. JNU001 with leaf-spot-disease-related endophytic bacteria.

BACKGROUND: Owing to the excellent properties of photosensitization, cercosporin, one of naturally occurring perylenequinonoid pigments, has been widely used in photodynamic therapy, or as an antimicrobial agent and an organophotocatalyst. However, because of low efficiency of total chemical synthesis and low yield of current microbial fermentation, the limited production restricts its broad applications. Thus, the strategies to improve the production of cercosporin were highly desired. Besides traditional optimization methods, here we screened leaf-spot-disease-related endophytic bacteria to co-culture with our previous identified Cercospora sp. JNU001 to increase cercosporin production. RESULTS: Bacillus velezensis B04 and Lysinibacillus sp. B15 isolated from leaves with leaf spot diseases were found to facilitate cercosporin secretion into the broth and then enhance the production of cercosporin. After 4 days of co-culture, Bacillus velezensis B04 allowed to increase the production of cercosporin from 128.2 mg/L to 984.4 mg/L, which was 7.68-fold of the previously reported one. Lysinibacillus sp. B15 could also enhance the production of cercosporin with a yield of 626.3 mg/L, which was 4.89-fold higher than the starting condition. More importantly, we found that bacteria B04 and B15 employed two different mechanisms to improve the production of cercosporin, in which B04 facilitated cercosporin secretion into the broth by loosening and damaging the hyphae surface of Cercospora sp. JNU001 while B15 could adsorb cercosporin to improve its secretion. CONCLUSIONS: We here established a novel and effective co-culture method to improve the production of cercosporin by increasing its secretion ability from Cercospora sp. JNU001, allowing to develop more potential applications of cercosporin.

MALDI-HRMS Imaging Maps the Localization of Skyrin, the Precursor of Hypericin, and Pathway Intermediates in Leaves of Hypericum Species.

Hypericum perforatum and related species (Hypericaceae) are a reservoir of pharmacologically important secondary metabolites, including the well-known naphthodianthrone hypericin. However, the exact biosynthetic steps in the hypericin biosynthetic pathway, vis-à-vis the essential precursors and their localization in plants, remain unestablished. Recently, we proposed a novel biosynthetic pathway of hypericin, not through emodin and emodin anthrone, but skyrin. However, the localization of skyrin and its precursors in Hypericum plants, as well as the correlation between their spatial distribution with the hypericin pathway intermediates and the produced naphthodianthrones, are not known. Herein, we report the spatial distribution of skyrin and its precursors in leaves of five in vitro cultivated Hypericum plant species concomitant to hypericin, its analogs, as well as its previously proposed precursors emodin and emodin anthrone, using MALDI-HRMS imaging. Firstly, we employed HPLC-HRMS to confirm the presence of skyrin in all analyzed species, namely H. humifusum, H. bupleuroides, H. annulatum, H. tetrapterum, and H. rumeliacum. Thereafter, MALDI-HRMS imaging of the skyrin-containing leaves revealed a species-specific distribution and localization pattern of skyrin. Skyrin is localized in the dark glands in H. humifusum and H. tetrapterum leaves together with hypericin but remains scattered throughout the leaves in H. annulatum, H. bupleuroides, and H. rumeliacum. The distribution and localization of related compounds were also mapped and are discussed concomitant to the incidence of skyrin. Taken together, our study establishes and correlates for the first time, the high spatial distribution of skyrin and its precursors, as well as of hypericin, its analogs, and previously proposed precursors emodin and emodin anthrone in the leaves of Hypericum plants.

Ultrasound-assisted packed-bed extraction of hypericin from Hypericum perforatum L. and optimization by response surface methodology.

This paper presents the successful application of ultrasound-assisted packed-bed (UAE-PB) method for the extraction of hypericin from the Hypericum perfuratum L. The Soxhlet system was utilized for the determination of suitable solvent from ethanol, methanol or from the mixture of different proportions of ethanol-methanol. The mixture of 50:50 v/v ethanol-methanol was obtained to be the most suitable solvent since it led to the highest extraction amount of hypericin. The extraction amount of hypericin increased by 13.6% and 21.4% when the solvent changed from pure methanol to the mixture of 50:50 v/v ethanol-methanol for the extraction time of 3 and 8 h, respectively. Subsequently, the extraction was conducted through the UAE-PB, and the effects of temperature, time, and the ratio of solvent to the dried plant were studied. The response surface method (RSM) was used to investigate the effect of parameters on the extraction in the UAE-PB system. At the temperature of 60 °C, extraction time of 105 min, and the solvent to plant ratio of 15.3, the maximum extraction yield of hypericin was achieved. In the optimal conditions, the amount of extraction was 0.112 mg hypericin/g dried plant, which was in accordance with the optimized predicted value (0.111 mg hypericin/g dried plant) from Design-Expert software.

Sedimentary archive of Polycyclic Aromatic Hydrocarbons and perylene sources in the northern part of Taihu Lake, China.

In the present work, we analyzed the concentration patterns of 20 Polycyclic Aromatic Hydrocarbons (PAHs) in 25 surface sediments and 11 sediment cores from the northern part of Taihu Lake, China. Three of the cores were dated based on 137Cs activity for the deposition age of the sediment. The spatial distributions of the PAH concentrations show that the inflow rivers into Zhushan Bay and Meiliang Bay were the main pathway for PAHs and sediment input to the northern part of the lake. This results in substantially higher PAH concentrations (up to 5000 ng/g) and sedimentation rates (higher than the average of 3-4 mm/a) in the area close to the river outlets. In addition, results also show that PAH concentrations in the sediments considerably increased from the early 1960s, but the decreasing concentrations in the upper layers of the sediment could be attributed to the introduction of measures on environmental improvement from ca. 2000. There were both anthropogenic and biogenic origins of perylene in the lake sediments, which were distinguished based on spatial distribution patterns and also the concentration proportions of perylene to the sum of the 20 PAHs. In the cores collected close to river outlets, the concentration proportions of perylene typically range from 0.02 to 0.18 and there are significant positive linear correlations between the concentration of perylene and three anthropogenic PAHs (Benzo[a]pyrene, Benzo[e]pyrene, Pyrene), suggesting that perylene was dominated by anthropogenic input. However, the cores collected further away from the river outlets show the concentration proportions between 0.13 and 0.96, and present significant negative correlations or no correlations between perylene and the three PAHs, suggesting that perylene was mainly formed by biogenic activities. Furthermore, the different perylene sources accompanied with the location distributions imply that anthropogenic activities could inhibit its biogenic formation.

Chemometric evaluation of hypericin and related phytochemicals in 17 in vitro cultured Hypericum species, hairy root cultures and hairy root-derived transgenic plants.

OBJECTIVES: The objective of this study was to ascertain the presence and correlations among eight important secondary metabolites viz. hypericin, pseudohypericin, emodin, hyperforin, rutin, hyperoside, quercetin and quercitrin in different organs of 17 in vitro cultured Hypericum species, along with H. tomentosum and H. tetrapterum hairy root cultures, and hairy root-derived transgenic plants of H. tomentosum. METHODS: Samples were extracted and analysed by LC-MS. The LC-MS data were subjected to chemometric evaluations for metabolite profiling and correlating the phytochemical compositions in different samples. KEY FINDINGS: Hypericin, pseudohypericin and their proposed precursor emodin were detected in various levels in the leaves of eight Hypericum species. The highest content of hypericins and emodin was found in H. tetrapterum, which contains the studied secondary metabolites in all plant organs. A significant positive correlation between hypericins and emodin was observed both by principal component analysis (PCA) and multidimensional scaling (MDS), indicating the role of emodin as a possible precursor in the biosynthetic pathway of hypericins. Flavonoids were found in all tested plant organs except roots of H. pulchrum. The hairy roots lacked hypericin, pseudohypericin, emodin, hyperforin and rutin. However, the hairy root-derived transgenic plants showed a significant increase in flavonoids. CONCLUSIONS: This study broadens knowledge about the phytochemical composition of selected in vitro cultured Hypericum species, compared to that of hairy root cultures and hairy root-derived transgenic plants.

Natural zeolite for adsorbing and release of functional materials.

Using multiphoton microscopy (MPM), we demonstrated that effective inducing of two-photon excited luminescence and second-harmonic generation signals in nano/microparticles of clinoptilolite type of zeolite (CZ) by femtosecond near-infrared laser excitation can be successfully utilized in multiphoton imaging of the drug adsorption processes. Adsorption of photodynamic active dyes (hypericin, chlorin e6, methylene blue, and fluorescein) and their release from CZ pores in the presence of biomolecules, such as collagen from bovine Achilles tendon, albumin, and hemoglobin, were investigated by absorption and fluorescence spectrometry. To quantify the experimental results on hypericin release, here we use a kinetic curves fitting approach and calculate hypericin release rates in different environments. This approach allows to compare various mathematical models and uses more parameters to better characterize drug release profiles. In addition, magnetic CZ particles were fabricated and proposed as a promising material for drug delivery and controlled release in biological systems. Optical spectrometry and MPM are effective approaches that may reveal potential of natural zeolites in controlled drug delivery and biomedical imaging.

Relation between hypericin content and morphometric leaf parameters in Hypericum spp.: A case of cubic degree polynomial function.

Higher plants often accumulate secondary metabolites in multicellular structures or in secretory reservoirs. Biotechnological production of such compounds by cell cultures lacking proper morphological structures is difficult, therefore possibilities for an efficient increase of their formation by organ cultures are being searched. The genus Hypericum comprises many species that store photoactive and phototoxic naphthodianthrones in the dark nodules on their above-ground parts. To date, the relation between the content of hypericins and their proto-forms accumulated in the nodules, and morphological characters of the plant parts containing these structures has not been sufficiently explained. The content of hypericins and leaf morphology characters were measured in 12 selected diploid seed-derived Hypericum species cultured in vitro. The leaf volume and the volume of the nodules per leaf were calculated. Based on these data, a cubic degree polynomial regression model with high reliability was constructed. The model enables an estimate of the biosynthetic capacity of the cultures, and may be useful in designing the experiments aimed at elicitation of these unique secondary metabolites in shoot cultures of Hypericum spp. An analogous model may be developed for interpretation of experimental results for other plant species which accumulate metabolites in specialized morphological structures.

Accurate anisotropy recovery from fluorophore mixtures using Multivariate Curve Resolution (MCR).

Anisotropy resolved multidimensional emission spectroscopy (ARMES) provides valuable insights into multi-fluorophore systems like proteins that have complex overlapping emission bands. The method combines multidimensional fluorescence, anisotropy, and chemometrics to facilitate the differentiation of fluorophores with very similar emission properties. Here, we address the critical issue of standardizing the chemometric methods required to accurately extract spectral and anisotropy information from fluorophore mixtures using two standard sample sets: perylene in glycerol, and a mixture of Erythrosin B and Phloxine B with overlapping emission but different anisotropies. We show for the first time how to accurately model component anisotropy using Multivariate Curve Resolution (MCR) from data collected using total synchronous fluorescence scan (TSFS) and Excitation Emission Matrix (EEM) measurement methods. These datasets were selected to avoid the presence of inner filter effects (IFE) or Förster resonance energy transfer (FRET) that would depolarize fluorescence emission or reduce data tri-linearity. This allowed the non-trilinear TSFS data to yield accurate component anisotropy data once modelled using the correct data augmentation strategy, however, the EEM data proved to be more accurate once optimal constraints (non-negativity and correspondence among species) were employed. For perylene (S2) and Phloxine B which both have very weak anisotropy (<0.06), while the spectral recovery was excellent, the modelled anisotropy values were reasonably accurate (±20% of the real value) because of large relative noise contributions. However, for perylene (S1) and Erythrosin B which have large (>0.2) anisotropies, bilinear and trilinear EEM models built using a total tri-linearity constraint, yielded solutions without any rotational ambiguities and very accurate (±4% of real value) anisotropy values. These sample systems thus provide simple and robust test systems for validating the spectral measurement and chemometric data analysis elements of ARMES.

Enhanced production of perylenequinones in the endophytic fungus Shiraia sp. Slf14 by calcium/calmodulin signal transduction.

Perylenequinones (PQ) that notably produce reactive oxygen species upon exposure to visible light are a class of photoactivated polyketide mycotoxins produced by fungal plant pathogens such as Shiraia sp. The involvement of Ca2+/calmodulin (CaM) signalling in PQ biosynthesis was investigated by submerged culturing of Shiraia sp. Slf14, a species that produces hypocrellins HA and HB and elsinochromes EA, EB, and EC. Our results showed that the total content of PQ reached 1894.66 ± 21.93 mg/L under optimal conditions of Ca2+ addition, which represents a 5.8-fold improvement over controls. The addition of pharmacological Ca2+ sensor inhibitors strongly inhibited PQ production, which indicates that Ca2+/CaM signalling regulates PQ biosynthesis. The expression levels of Ca2+ sensor and PQ biosynthetic genes were downregulated following addition of inhibitors but were upregulated upon addition of Ca2+. Inhibition was partially released by external Ca2+ supplementation. Fluo-3/AM experiments revealed that similar cytosolic Ca2+ variation occurred under these conditions. These results demonstrated that Ca2+ signalling via the CaM transduction pathway plays a pivotal role in PQ biosynthesis.

Identifying risk sources of air contamination by polycyclic aromatic hydrocarbons.

This article is directed to determining concentrations of polycyclic aromatic hydrocarbons (PAHs), which are sorbed to solid particles in the air. Pollution sources were identified on the basis of the ratio of benzo[ghi]perylene (BghiPe) to benzo[a]pyrene (BaP). Because various important information is lost by determining the simple ratio of concentrations, least squares linear regression (classic ordinary least squares regression), reduced major axis, orthogonal regression, and Kendall-Theil robust diagnostics were utilized for identification. Statistical evaluation using all aforementioned methods demonstrated different ratios of the monitored PAHs in the intervals examined during warmer and colder periods. Analogous outputs were provided by comparing gradients of the emission factors acquired from the measured concentrations of BghiPe and BaP in motor vehicle exhaust gases. Based on these outputs, it was possible plausibly to state that the influence of burning organic fuels in heating stoves is prevalent in colder periods whereas in warmer periods transport was the exclusive source because other sources of PAH emissions were not found in the examined locations.

Optimized and Validated HPLC Analysis of St. John's Wort Extract and Final Products by Simultaneous Determination of Major Ingredients.

Aim of this work was to develop a validated high performance liquid chromatography method for the analysis of extracts and final products of St. John's wort, according to international guidelines for bioanalytical method validation. Chromatographic separation was performed on a C18 column with a combination of gradient and isocratic steps; the mobile phase composed of ammonium acetate solution (pH 4.5; 10 mM), acetonitrile and methanol. Quantification and method validation was performed using extract spiked with external reference standards of chlorogenic acid, rutin, hyperoside, isoquercitrin, quercetin and hypericin. Validation study revealed that trans-chlorogenic acid is partially transformed into its cis-isomer during analysis. The method showed good linearity, precision and accuracy. Hyperforin was completely unstable. All other ingredients were stable at -18°C and after three freeze-thaw cycles, while stability of most ingredients was limited at room temperature and 4 - 8°C; quercetin was the most unstable one. The major ingredients of methanolic extracts, infusions and final products of Hypericum perforatum were completely resolved and quantified. Beyond its potential usefulness in the analysis of St. John's wort products, this study addresses the issue of validation from the perspective of the field of bioanalysis and reveals the wealth of critical information which can be derived.

Arbuscular mycorrhizal fungi altered the hypericin, pseudohypericin, and hyperforin content in flowers of Hypericum perforatum grown under contrasting P availability in a highly organic substrate.

St. John's Wort (Hypericum perforatum) is a perennial herb able to produce water-soluble active ingredients (a.i.), mostly in flowers, with a wide range of medicinal and biotechnological uses. However, information about the ability of arbuscular mycorrhizal fungi (AMF) to affect its biomass accumulation, flower production, and concentration of a.i. under contrasting nutrient availability is still scarce. In the present experiment, we evaluated the role of AMF on growth, flower production, and concentration of bioactive secondary metabolites (hypericin, pseudohypericin, and hyperforin) of H. perforatum under contrasting P availability. AMF stimulated the production of aboveground biomass under low P conditions and increased the production of root biomass. AMF almost halved the number of flowers per plant by means of a reduction of the number of flower-bearing stems per plant under high P availability and through a lower number of flowers per stem in the low-P treatment. Flower hyperforin concentration was 17.5% lower in mycorrhizal than in non-mycorrhizal plants. On the contrary, pseudohypericin and hypericin concentrations increased by 166.8 and 279.2%, respectively, with AMF under low P availability, whereas no effect of AMF was found under high P availability. These results have implications for modulating the secondary metabolite production of H. perforatum. However, further studies are needed to evaluate the competition for photosynthates between AMF and flowers at different nutrient availabilities for both plant and AM fungus.

Novel electrochemiluminescence of perylene derivative and its application to mercury ion detection based on a dual amplification strategy.

In this paper, a novel covalently crosslinked perylene derivative (PTC-PEI) composed of polyethylenimine (PEI) and perylenetetracarboxylic acid (PTCA) has been first investigated for cathodic electrochemiluminescence (ECL) in an aqueous system with dissolved O2 as coreactant. The promising novel ECL materials of PTC-PEI exhibited admirable physical and chemical stability and high ECL intensity, which held an alternative way to construct ECL sensor with improved sensitivity. Thus, it was applied to construct a dual amplified "signal-on" mercury ion (Hg(2+)) sensor by the employment of nicking endonuclease (NEase)-assisted target recycling and rolling circle amplification (RCA) for signal amplification. Herein, a long G-rich sequence was generated by RCA process to capture abundant hemin on the electrode surface, and then a significantly amplified ECL signal of PTC-PEI was obtained. Based on dual signal amplification strategy, the devised sensor showed a linear range from 0.1pM to 0.1µΜ with a detection limit down to 33fM (S/N=3), and was successfully used in the direct detection of real water sample with high sensitivity and selectivity.

TESTING PHARMACEUTICAL RELEASE OF ACTIVE SUBSTANCES FROM MEDICINAL PRODUCTS CONTAINING ST. JOHN'S WORT.

The aim of this study was to determine the content of hypericins and flavonoids in tablets and capsules containing the extract or powdered herb of St. John's wort, in herbs for infusion and herbal infusions and to release of these compounds from tablets and capsules. HPLC method was used to determine the assay of hypericins and flavonoids in all tested products. The hypericins content was between 0.35 mg and 1.44 mg per tablet or capsule. The release of hypericins from these products in the phosphate buffer of pH 6.8 is between 30 and 60% of the determined content. The degree of hypericins release from herbs into infusions was 15% on average, which corresponds to 0.64 mg of hypericins per infusion of 4 g of herbs. The flavonoids content was between 8.79 and 36.3 mg per tablet or capsule. The release of flavonoids in the phosphate buffer of pH 6.8 is between 63 and 85% of the determined content. The degree of flavonoids release was 76% on average, which corresponds to 77.0 mg per infusion of 4 g of herbs. The test results confirmed that infusions from the St. John's wort constitute are a rich source of flavonoids. At the same time, the universally accepted opinion that aqueous infusions contain only trace amounts of hypericins was not confirmed. Infusions from Herba hyperici may also be a source of hypericins in amounts comparable with the minimum dose recommended for the treatment of mild to moderate depressive episodes.

Shoot Tip Meristem Cryopreservation of Hypericum Species.

Based on our long-standing experience with in vitro culture of Hypericum perforatum, a clonal multiplication system and vitrification-based cryopreservation protocols have been applied to several Hypericum species: H. humifusum L., H. annulatum Moris, H. tomentosum L., H. tetrapterum Fries, H. pulchrum L., and H. rumeliacum Boiss. The shoot tips were cryopreserved using a uniform procedure that includes pretreatment with abscisic acid (ABA), PVS3 cryoprotection, and direct immersion into the liquid nitrogen (LN). The freezing-tolerant Hypericum species were pre-exposed to the cold acclimation conditions performed by a 7-day exposure to 4 °C. The content of naphtodianthrones (hypericins) including hypericin, pseudohypericin, and their protoforms was quantified by HPLC. Ploidy of plants was determined by both flow cytometry of leaf tissue and chromosome counts of root tip meristematic cells. We have shown that the post-thaw recovery rate of the shoot tips, pretreated with 0.076 µM ABA for 7 days at room temperature, led to the post-cryogenic survival from 5 % in H. tomentosum to 21 % in H. annulatum. As compared to the untreated (control) plants, the content of hypericins in plants regenerated after cryopreservation remained unchanged or decreased in H. perforatum, H. humifusum, H. annulatum, H. tomentosum, H. tetrapterum, and H. rumeliacum. However, the pre-exposition of the freezing-tolerant H. perforatum to cold acclimation prior to excision of the shoot tips has improved the post-thaw recovery to 45 % and resulted in threefold increase of the total hypericin content.

Construction of Hypericin Gland-Specific cDNA Library via Suppression Subtractive Hybridization.

Hypericin, an important determinant of the pharmacological properties of the genus Hypericum, is considered as a major molecule for drug development. However, biosynthesis and accumulation of hypericin is not well understood. Identification of genes differentially expressed in tissues with and without hypericin accumulation is a useful strategy to elucidate the mechanisms underlying the development of the dark glands and hypericin biosynthesis. Suppression Subtractive Hybridization (SSH) is a unique method for PCR-based amplification of specific cDNA fragments that differ between a control (driver) and experimental (tester) transcriptome. This technique relies on the removal of dsDNA formed by hybridization between a control and test sample, thus eliminating cDNAs of similar abundance, and retaining differentially expressed or variable in sequence cDNAs. In our laboratory we applied this method to identify the genes involved in the development of dark glands and accumulation of hypericin in Hypericum perforatum. Here we describe the complete procedure for the construction of hypericin gland-specific subtracted cDNA library.

Identification and quantification of seven fused aromatic rings C26H14 peri-condensed benzenoid polycyclic aromatic hydrocarbons in a complex mixture of polycyclic aromatic hydrocarbons from coal tar.

A methodology for the characterization of groups of polycyclic aromatic hydrocarbons (PAHs) using a combination of normal phase liquid chromatography with ultraviolet-visible spectroscopy (NPLC/UV-vis) and gas chromatography with mass spectrometry (GC/MS) was used for the identification and quantification of seven fused aromatic rings C26H14 peri-condensed benzenoid polycyclic aromatic hydrocarbons, PAHs, in standard reference material (SRM) 1597a, complex mixture of PAHs from coal tar. The NPLC/UV-vis isolated the fractions based on the number of aromatic carbons and the GC/MS allowed the identification and quantification of five of the nine C26H14 PAH isomers; naphtho[1,2,3,4-ghi]perylene, dibenzo[b,ghi]perylene, dibenzo[b,pqr]perylene, naphtho[8,1,2-bcd]perylene, and dibenzo[cd,lm]perylene using a retention time comparison with authentic reference standards. For the other four benzenoid isomers with no available reference standards the following two approaches were used. First, the annellation theory was used to achieve the potential identification of benzo[qr]naphtho[3,2,1,8-defg]chrysene, and second, the elution distribution in the GC fractions was used to support the potential identification of benzo[qr]naphtho[3,2,1,8-defg]chrysene and to reach the tentative identifications of dibenzo[a,ghi]perylene, naphtho[7,8,1,2,3-pqrst]pentaphene, and anthra[2,1,9,8-opqra]naphthacene. It is the first time that naphtho[1,2,3,4-ghi]perylene, dibenzo[b,ghi]perylene, dibenzo[b,pqr]perylene, naphtho[8,1,2-bcd]perylene, and dibenzo[cd,lm]perylene are quantified, and the first time that benzo[qr]naphtho[3,2,1,8-defg]chrysene is potentially identified, in any sample, in any context.