RESUMO
Tire tread particles (TTP) are environmentally prevalent microplastics and generate toxic aqueous leachate. We determined the total carbon and nitrogen leachate concentrations and chemical profiles from micron (â¼32 µm) and centimeter (â¼1 cm) TTP leachate over 12 days. Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) were used to measure the concentration of leached compounds. Nontargeted chemical analysis by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC/TOF-MS) was used to compare the chemical profiles of leachates. After leaching for 12 days, DOC was 4.0 times higher in the micron TTP leachate than in the centimeter TTP leachate, and TDN was 2.6 times higher. The total GC×GC/TOF-MS chromatographic feature peak area was 2.9 times greater in the micron TTP leachate than the centimeter TTP leachate, and similarly, the total relative abundance of 54 tentatively identified compounds was 3.3 times greater. We identified frequently measured tire-related chemicals, such as 6PPD, N-cyclohexyl-N'-phenylurea (CPU), and hexa(methoxymethyl)melamine (HMMM), but nearly 50% of detected chemicals were not previously reported in tire literature or lacked toxicity information. Overall, the results demonstrate that smaller TTP have a greater potential to leach chemicals into aquatic systems, but a significant portion of these chemicals are not well-studied and require further risk assessment.
Assuntos
Matéria Orgânica Dissolvida , Fenilenodiaminas , Plásticos , Poluentes Químicos da Água , Matéria Orgânica Dissolvida/análise , Matéria Orgânica Dissolvida/química , Matéria Orgânica Dissolvida/classificação , Cromatografia Gasosa-Espectrometria de Massas , Plásticos/análise , Plásticos/química , Plásticos/classificação , Tamanho da Partícula , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/química , Poluentes Químicos da Água/classificação , Fenilenodiaminas/análise , Fenilenodiaminas/química , Fenilenodiaminas/classificação , Medição de RiscoRESUMO
Plastic debris is thought to be widespread in freshwater ecosystems globally1. However, a lack of comprehensive and comparable data makes rigorous assessment of its distribution challenging2,3. Here we present a standardized cross-national survey that assesses the abundance and type of plastic debris (>250 µm) in freshwater ecosystems. We sample surface waters of 38 lakes and reservoirs, distributed across gradients of geographical position and limnological attributes, with the aim to identify factors associated with an increased observation of plastics. We find plastic debris in all studied lakes and reservoirs, suggesting that these ecosystems play a key role in the plastic-pollution cycle. Our results indicate that two types of lakes are particularly vulnerable to plastic contamination: lakes and reservoirs in densely populated and urbanized areas and large lakes and reservoirs with elevated deposition areas, long water-retention times and high levels of anthropogenic influence. Plastic concentrations vary widely among lakes; in the most polluted, concentrations reach or even exceed those reported in the subtropical oceanic gyres, marine areas collecting large amounts of debris4. Our findings highlight the importance of including lakes and reservoirs when addressing plastic pollution, in the context of pollution management and for the continued provision of lake ecosystem services.
Assuntos
Lagos , Plásticos , Poluição da Água , Abastecimento de Água , Ecossistema , Lagos/química , Plásticos/análise , Plásticos/classificação , Poluição da Água/análise , Poluição da Água/estatística & dados numéricos , Inquéritos e Questionários , Urbanização , Atividades HumanasRESUMO
This paper presents the abundance and ubiquitous presence of microplastics in a protected coastal zone located in the southeast of Spain: The Mar Menor lagoon, an important tourist destination in this region. Seventeen sampling sites, corresponding to both intertidal and backshore points, were collected during winter 2017 and 2018, being situated in different protected areas according to international, European and Spanish environmental policies. The main objectives of the study were to examine microplastics in both protected and non-protected areas, and to test the importance of local activities on their presence. Northwest samples reported higher average microplastic concentrations than samples collected in the southeastern part of the coastal lagoon, likely due to the extensive use of sludge from wastewater treatment plants besides the fragmentation of low density polyethylene from plastic greenhouses, being microplastic films also higher for northwest than for southeast samples. Moreover, large inter-site differences observed in microplastic concentrations also demonstrated that local activities, mainly tourism and fishery, may play an important role as microplastic sources. The extensive amount of 17 different polymer types identified in this paper, much higher than most reported in similar studies, together with the variety of colors of microplastics most of them in a fragmented form (59.4%) and mainly detected in urban beaches, should be related to the geographical situation of this coastal lagoon, together with enormous environmental passives accumulated over the past 50 years. Only polyvinyl ester resins proved to be statistically higher in non-protected than in protected zones, probably related to their use in manufacturing boat hulls, although sources and pathways for microplastics are always difficult to assess. Measures to avoid microplastic pollution should be taken through educational programs, with also a clear commitment from plastic producers and transformers.
Assuntos
Sedimentos Geológicos/química , Plásticos/análise , Lagoas/química , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Plásticos/química , Plásticos/classificação , Polietileno/análise , Polivinil/análise , Dióxido de Silício/análise , Espanha , Poluentes Químicos da Água/química , Poluentes Químicos da Água/classificaçãoRESUMO
At present, the study of microplastic sources is in a relatively preliminary stage due to the complexity of microplastic features in the environment. Based on a literature review, we developed a source-specific classification system for the quantitative analysis of microplastic sources. The classification system includes ten types of microplastics based on morphology and composition and can identify their main sources and the associated probabilities. To reflect the complexity of types and sources in the regional combination of microplastics, we first propose a microplastic diversity index (D1-D'(MP)). We use the South China Sea as an example to carry out quantitative source analysis and calculate the diversity index. Eight types of microplastics were found, mainly consisting of maritime coatings (type "Gran_coat") (33.0%) and synthetic fibers (type "Fib_thin") (29.6%). We also found that the diversity increased with offshore distance. In addition, we partitioned surface microplastics globally according to a two-dimensional microplastic abundance-diversity index. We believe that these indicators can effectively reflect pollution status and ultimately lead to different types of control measures. In the future, additional indicators for the characterization of microplastics must be included in the classification system to establish a one-to-one source analysis system for microplastic characteristics and source apportionment. In general, our study may provide new insights into the establishment of more accurate and quantitative source apportionment techniques and effective pollution control.
Assuntos
Monitoramento Ambiental/métodos , Poluição Difusa/análise , Plásticos/análise , Água do Mar/química , Poluentes Químicos da Água/análise , China , Oceanos e Mares , Plásticos/classificação , Poluentes Químicos da Água/classificaçãoRESUMO
Despite concerns regarding the environmental impacts of microplastics, knowledge of the incidence and levels of synthetic particles in large marine vertebrates is lacking. Here, we utilize an optimized enzymatic digestion methodology, previously developed for zooplankton, to explore whether synthetic particles could be isolated from marine turtle ingesta. We report the presence of synthetic particles in every turtle subjected to investigation (n = 102) which included individuals from all seven species of marine turtle, sampled from three ocean basins (Atlantic [ATL]: n = 30, four species; Mediterranean (MED): n = 56, two species; Pacific (PAC): n = 16, five species). Most particles (n = 811) were fibres (ATL: 77.1% MED: 85.3% PAC: 64.8%) with blue and black being the dominant colours. In lesser quantities were fragments (ATL: 22.9%: MED: 14.7% PAC: 20.2%) and microbeads (4.8%; PAC only; to our knowledge the first isolation of microbeads from marine megavertebrates). Fourier transform infrared spectroscopy (FT-IR) of a subsample of particles (n = 169) showed a range of synthetic materials such as elastomers (MED: 61.2%; PAC: 3.4%), thermoplastics (ATL: 36.8%: MED: 20.7% PAC: 27.7%) and synthetic regenerated cellulosic fibres (SRCF; ATL: 63.2%: MED: 5.8% PAC: 68.9%). Synthetic particles being isolated from species occupying different trophic levels suggest the possibility of multiple ingestion pathways. These include exposure from polluted seawater and sediments and/or additional trophic transfer from contaminated prey/forage items. We assess the likelihood that microplastic ingestion presents a significant conservation problem at current levels compared to other anthropogenic threats.
Assuntos
Exposição Ambiental , Plásticos/análise , Tartarugas/fisiologia , Poluentes Químicos da Água/análise , Animais , Organismos Aquáticos/fisiologia , Oceano Atlântico , Monitoramento Ambiental , Mar Mediterrâneo , Oceano Pacífico , Plásticos/classificação , Espectroscopia de Infravermelho com Transformada de Fourier , Poluentes Químicos da Água/classificaçãoRESUMO
During the last decades, biopolymers experienced a renaissance. The increasing limitation of fossil resources in combination with a public demand for environmental-friendly and sustainable processes has led to the formation of a market for biobased plastics. Especially non-biodegradable bioplastics are very interesting materials, as they combine the benefits of reduced carbon footprint during production and increased resource efficiency with the persistence to microbial degradation. Consequently, persistent biomass-derived plastic materials are highly promising to substitute conventional fossil-based plastics in applications, which require durability and longevity. Non-biodegradable bioplastics derived from renewable resources represent 57% of all bioplastics with partially biobased polyethylene terephthalate currently leading the market, followed by biobased polyamides and fully biomass-derived polyethylene. An exceptional biopolymer with thermoplastic properties was discovered only two decades ago, when-for the first time-polythioesters were synthesized by microbial fermentation. Though synthesized by bacteria, it turned out that polythioesters are non-biodegradable by microorganisms in contrast to all other biopolymers and thus, represent a novel non-biodegradable bioplastic material. This review gives an overview about the recent development and progress regarding bioplastics with special focus on persistent bioplastics. We describe the generation of the respective monomers from biomass-derived substrates and summarize the current status of production, which range from the laboratory-scale up to large-scale industrial processes.
Assuntos
Biopolímeros/química , Biopolímeros/metabolismo , Biodegradação Ambiental , Biotecnologia/métodos , Biotecnologia/tendências , Plásticos/química , Plásticos/classificação , Plásticos/metabolismoRESUMO
Thin films of various polymers are currently used for wrapping various food products and illicit drugs worldwide. In thin films, polyvinyl chloride is the third most widely used polymer after the polyethylene and polypropylene. These films usually contain harmful plasticizers such as adipates, phthalates, and citrates along with other additives. Plasticizers adversely affect the human health and therefore, their migration in foodstuff must be monitored carefully. By considering all these facts, this study summarizes the utilities of non-destructive ATR-FTIR spectroscopy in the identification of base polymer as well as plasticizers in various cling films and application of multivariate analysis in the identification and classification of the cling films to their respective groups. In the present research, a considerable transfer of plasticizers from the wrapping material is observed. A spectral library is developed for all 22 cling film samples for further comparison of the unknown sample. The obtained results are promising, especially for classification purposes. The multivariate method significantly provides 100% of cross-validation classification along with 99.13% discrimination. In this study, we have developed a method to compare or link a cling film which somebody uses and found that there is a transfer of plasticizers and other additives into the food and if the manufacturing company disown that this specific cling film does not belong to our company. In such type of cases, this method could link the suspected cling film to their manufacturers with precision and accurateness. The chronic effect of plasticizers on human health can also be linked to the type of cling film the accused was using consistently.
Assuntos
Armazenamento de Medicamentos/métodos , Embalagem de Alimentos/métodos , Plastificantes/análise , Plásticos/química , Análise Espectral/métodos , Drogas Ilícitas , Análise Multivariada , Plastificantes/química , Plásticos/classificação , Reprodutibilidade dos TestesRESUMO
A review is presented of the manufacture and use of different types of plastic, and the effects of pollution by these materials on animal, human and environmental health, insofar as this is known. Since 2004, the world has made as much plastic as it did in the previous half century, and it has been reckoned that the total mass of virgin plastics ever made amounts to 8.3 billion tonnes, mainly derived from natural gas and crude oil, used as chemical feedstocks and fuel sources. Between 1950 and 2015, a total of 6.3 billion tonnes of primary and secondary (recycled) plastic waste was generated, of which around 9% has been recycled, and 12% incinerated, with the remaining 79% either being stored in landfills or having been released directly into the natural environment. In 2015, 407 million tonnes (Mt) of plastic was produced, of which 164 Mt was consumed by packaging (36% of the total). Although quoted values vary, packaging probably accounts for around one third of all plastics used, of which approximately 40% goes to landfill, while 32% escapes the collection system. It has been deduced that around 9 Mt of plastic entered the oceans in 2010, as a result of mismanaged waste, along with up to 0.5 Mt each of microplastics from washing synthetic textiles, and from the abrasion of tyres on road surfaces. However, the amount of plastics actually measured in the oceans represents less than 1% of the (at least) 150 Mt reckoned to have been released into the oceans over time. Plastic accounts for around 10% by mass of municipal waste, but up to 85% of marine debris items - most of which arrive from land-based sources. Geographically, the five heaviest plastic polluters are P. R. China, Indonesia, Philippines, Vietnam and Sri Lanka, which between them contribute 56% of global plastic waste. Larger, primary plastic items can undergo progressive fragmentation to yield a greater number of increasingly smaller 'secondary' microplastic particles, thus increasing the overall surface area of the plastic material, which enhances its ability to absorb, and concentrate, persistent organic pollutants (POPs) such as dichlorodiphenyltrichloroethane (DDT) and polychlorinated biphenyls (PCBs), with the potential to transfer them to the tissues of animals that ingest the microplastic particles, particularly in marine environments. Although fears that such microparticles and their toxins may be passed via food webs to humans are not as yet substantiated, the direct ingestion of microplastics by humans via drinking water is a distinct possibility - since 92% of samples taken in the USA and 72% in Europe showed their presence - although any consequent health effects are as yet unclear. Foodstuffs may also become contaminated by microplastics from the air, although any consequent health effects are also unknown. In regard to such airborne sources, it is noteworthy that small plastic particles have been found in human lung tissue, which might prove an adverse health issue under given circumstances. It is also very striking that microplastics have been detected in mountain soils in Switzerland, which are most likely windborne in origin. Arctic ice core samples too have revealed the presence of microplastics, which were most likely carried on ocean currents from the Pacific garbage patch, and from local pollution from shipping and fishing. Thus, sea ice traps large amounts of microplastics and transports them across the Arctic Ocean, but these particles will be released into the global environment when the ice melts, particularly under the influence of a rising mean global temperature. While there is a growing emphasis toward the substitution of petrochemically derived plastics by bioplastics, controversy has arisen in regard to how biodegradable the latter actually are in the open environment, and they presently only account for 0.5% of the total mass of plastics manufactured globally. Since the majority of bioplastics are made from sugar and starch materials, to expand their use significantly raises the prospect of competition between growing crops to supply food or plastics, similarly to the diversion of food crops for the manufacture of primary biofuels. The use of oxo-plastics, which contain additives that assist the material to degrade, is also a matter of concern, since it is claimed that they merely fragment and add to the environmental burden of microplastics; hence, the European Union has moved to restrict their use. Since 6% of the current global oil (including natural gas liquids, NGLs) production is used to manufacture plastic commodities - predicted to rise to 20% by 2050 - the current approaches for the manufacture and use of plastics (including their end-use) demand immediate revision. More extensive collection and recycling of plastic items at the end of their life, for re-use in new production, to offset the use of virgin plastic, is a critical aspect both for reducing the amount of plastic waste entering the environment, and in improving the efficiency of fossil resource use. This is central to the ideology underpinning the circular economy, which has common elements with permaculture, the latter being a regenerative design system based on 'nature as teacher', which could help optimise the use of resources in town and city environments, while minimising and repurposing 'waste'. Thus, food might be produced more on the local than the global scale, with smaller inputs of fuels (including transportation fuels for importing and distributing food), water and fertilisers, and with a marked reduction in the use of plastic packaging. Such an approach, adopted by billions of individuals, could prove of immense significance in ensuring future food security, and in reducing waste and pollution - of all kinds.
Assuntos
Poluentes Ambientais/química , Poluição Ambiental/efeitos adversos , Plásticos/química , Animais , Poluentes Ambientais/classificação , Poluentes Ambientais/toxicidade , Poluição Ambiental/prevenção & controle , Poluição Ambiental/estatística & dados numéricos , Humanos , Plásticos/classificação , Plásticos/toxicidadeRESUMO
A novel method, calcium hypochlorite (CHC) treatment, was proposed for separation of hazardous poly(vinyl chloride) (PVC) plastic from mixed plastic wastes (MPWs) by froth flotation. Flotation behavior of single plastic indicates that PVC can be separated from poly(ethylene terephthalate) (PET), poly(acrylonitrile-co-butadiene-co-styrene) (ABS), polystyrene (PS), polycarbonate (PC) and poly(methyl methacrylate) (PMMA) by froth flotation combined with CHC treatment. Mechanism of CHC treatment was examined by contact angle measurement, scanning electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy. Under the optimum conditions, separation of PVC from binary plastics with different particle sizes is achieved efficiently. The purity of PC, ABS, PMMA, PS and PET is greater than 96.8%, 98.5%, 98.8%, 97.4% and 96.3%, respectively. Separation of PVC from multi-plastics was further conducted by two-stage flotation. PVC can be separated efficiently from MPWs with residue content of 0.37%. Additionally, reusing CHC solution is practical. This work indicates that separation of hazardous PVC from MPWs is effective by froth flotation.
Assuntos
Resíduos Perigosos/análise , Plásticos/análise , Eliminação de Resíduos/métodos , Cloreto de Vinil/química , Acrilonitrila , Butadienos , Compostos de Cálcio , Tamanho da Partícula , Espectroscopia Fotoeletrônica , Plásticos/química , Plásticos/classificação , Cimento de Policarboxilato , Polietilenotereftalatos , Polímeros , Polimetil Metacrilato , PoliestirenosRESUMO
Dental materials, especially in restorative dentistry, must not only be cost-effective, they must also meet many other requirements: biocompatibility, durability, excellent shade and light effects, abrasion resistance, hardness, mechanical strength under pressure, chemical resistance, surface density, ease of manufacture, and easy intraoral maintenance.
Assuntos
Cerâmica/química , Materiais Dentários/química , Prótese Dentária Fixada por Implante , Plásticos/química , Materiais Biocompatíveis/química , Cerâmica/classificação , Cerâmica/economia , Cor , Desenho Assistido por Computador , Análise Custo-Benefício , Coroas , Implantes Dentários para Um Único Dente , Materiais Dentários/classificação , Materiais Dentários/economia , Falha de Restauração Dentária , Módulo de Elasticidade , Dureza , Humanos , Plásticos/classificação , Plásticos/economia , Maleabilidade , Estresse Mecânico , Propriedades de Superfície , Fraturas dos Dentes/terapia , Raiz Dentária/lesões , Zircônio/químicaRESUMO
Since recycling of materials is widely assumed to be environmentally and economically beneficial, reliable sorting and processing of waste packaging materials such as plastics is very important for recycling with high efficiency. An automated system that can quickly categorize these materials is certainly needed for obtaining maximum classification while maintaining high throughput. In this paper, first of all, the photographs of the plastic bottles have been taken and several preprocessing steps were carried out. The first preprocessing step is to extract the plastic area of a bottle from the background. Then, the morphological image operations are implemented. These operations are edge detection, noise removal, hole removing, image enhancement, and image segmentation. These morphological operations can be generally defined in terms of the combinations of erosion and dilation. The effect of bottle color as well as label are eliminated using these operations. Secondly, the pixel-wise intensity values of the plastic bottle images have been used together with the most popular subspace and statistical feature extraction methods to construct the feature vectors in this study. Only three types of plastics are considered due to higher existence ratio of them than the other plastic types in the world. The decision mechanism consists of five different feature extraction methods including as Principal Component Analysis (PCA), Kernel PCA (KPCA), Fisher's Linear Discriminant Analysis (FLDA), Singular Value Decomposition (SVD) and Laplacian Eigenmaps (LEMAP) and uses a simple experimental setup with a camera and homogenous backlighting. Due to the giving global solution for a classification problem, Support Vector Machine (SVM) is selected to achieve the classification task and majority voting technique is used as the decision mechanism. This technique equally weights each classification result and assigns the given plastic object to the class that the most classification results agree on. The proposed classification scheme provides high accuracy rate, and also it is able to run in real-time applications. It can automatically classify the plastic bottle types with approximately 90% recognition accuracy. Besides this, the proposed methodology yields approximately 96% classification rate for the separation of PET or non-PET plastic types. It also gives 92% accuracy for the categorization of non-PET plastic types into HPDE or PP.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Plásticos/classificação , Reciclagem/métodos , Resíduos Sólidos/classificação , Cor , Análise Discriminante , Desenho de Equipamento , Fotografação , Análise de Componente Principal , Máquina de Vetores de Suporte , Gerenciamento de Resíduos/instrumentação , Gerenciamento de Resíduos/métodosRESUMO
Plastic debris on six beaches near the Nakdong River Estuary, South Korea, was sampled in May and September 2012 and classified into three size classes, large microplastics (1-5 mm), mesoplastics (5-25 mm), and macroplastics (>25 mm). The relationships among the abundances of the size classes were then examined. The abundances of each size category in May (before rainy season) and in September (after rainy season) were 8205 and 27,606 particles/m(2) for large microplastics, 238 and 237 particles/m(2) for mesoplastics, and 0.97 and 1.03 particles/m(2) for macroplastics, respectively. Styrofoam was the most abundant item both in microplastic and mesoplastic debris, while intact plastics were most common in macroplastic debris. The abundances of meso- and micro-plastics were the most strongly correlated. There was a higher correlation between the abundances of macro- and meso-plastics than between macro- and micro-plastics.
Assuntos
Monitoramento Ambiental , Plásticos/análise , Resíduos/análise , Poluentes Químicos da Água/análise , Praias/estatística & dados numéricos , Plásticos/classificação , República da Coreia , Resíduos/classificação , Resíduos/estatística & dados numéricos , Poluentes Químicos da Água/classificaçãoRESUMO
Plastic is a broad name given to the different types of organic polymers having high molecular weight and is commonly derived from different petrochemicals. Plastics are generally not biodegradable or few are degradable but in a very slow rate. Day by day, the global demand of these polymers is sharply increasing; however, considering their abundance and potentiality in causing different environmental hazards, there is a great concern in the possible methods of degradation of plastics. Recently, there have been some debates at the world stage about the potential degradation procedures of these synthetic polymers and microbial degradation has emerged as one of the potential alternative ways of degradation of plastics. Alternatively, some scientists have also reported many adverse effects of these polymers in human health, and thus, there is an immediate need of a potential screening of some potential microbes to degrade these synthetic polymers. In this review, we have taken an attempt to accumulate all information regarding the chemical nature along with some potential microbes and their enzymatic nature of biodegradation of plastics along with some key factors that affect their biodegradability.
Assuntos
Monitoramento Ambiental/métodos , Fungos/metabolismo , Plásticos/metabolismo , Biodegradação Ambiental , Ecossistema , Plásticos/química , Plásticos/classificação , TemperaturaAssuntos
Política Ambiental , Resíduos Perigosos/efeitos adversos , Resíduos Perigosos/prevenção & controle , Plásticos/efeitos adversos , Plásticos/classificação , Eliminação de Resíduos/legislação & jurisprudência , Eliminação de Resíduos/estatística & dados numéricos , Animais , Monitoramento Ambiental , Política Ambiental/economia , Resíduos Perigosos/análise , Resíduos Perigosos/classificação , Humanos , Plásticos/análise , Plásticos/química , Reciclagem/tendências , Eliminação de Resíduos/economiaRESUMO
Objetivos. identificación y clasificación de los productos hospitalarios desechables que contengan policloruro de vinilo (PVC), integrando la búsqueda y valoración de productos alternativos libres de PVC sustentables desde un punto de vista coste/efectivo. Métodos. análisis de tipo descriptivo observacional. Se realizó en primer lugar una clasificación de los trabajos de investigación más recientes en las principales bases de datos. Seguidamente, se clasificaron los productos desechables susceptibles de contener PVC, dividiéndolos en 5 grupos: cánulas, sondas, tubos, bolsas y equipos enmarcados en el periodo de consumo 2008-2009, diferenciando la valoración técnica y económica de los materiales. Resultados. en el estudio se observa que de los 492 artículos analizados en su composición, 234 (47,5%) contienen PVC y las alternativas libres del compuesto conforman el 19,4%, siendo viable económicamente solo el 11,3% de las alternativas valoradas. Conclusiones. la investigación aclara las ventajas derivadas de la clasificación de productos con PVC, existiendo alternativas seguras y eficientes para algunas líneas de productos, en consonancia con la seguridad de los pacientes y la calidad en el trabajo por parte de los facultativos (AU)
Objectives. To identify and classify disposable hospital products containing polyvinyl chloride (PVC), including the search and evaluation of cost-effective sustainable alternative products free of PVC. Methods. A descriptive observational analysis was performed, after classifying the latest research in major databases, and disposable products that could contain PVC. These were divided into 5 groups: cannulas, catheters, tubes, bags, and equipment, purchased in the period 2008-2009, differentiating between the technical and economic assessment of the materials. Results. In the analysis of the composition of 492 articles selected, 234 (47.5%) contained PVC, and 19.4% were considered PVC-free alternatives, with only 11.3% of these being economically viable. Conclusions. This study highlights the advantages of the classification of PVC products, by showing that safe and efficient alternatives exist for some product lines that are consistent with patient safety and quality in the work by doctors (AU)
Assuntos
Humanos , Masculino , Feminino , 50303 , Cloreto de Vinil/efeitos adversos , Compostos de Vinila/efeitos adversos , Administração de Materiais no Hospital/métodos , Gestão de Riscos , Resíduos de Serviços de Saúde/classificação , Resíduos de Serviços de Saúde/economia , Resíduos de Serviços de Saúde/prevenção & controle , Segurança do Paciente/estatística & dados numéricos , Segurança do Paciente/normas , Administração de Materiais no Hospital/organização & administração , Administração de Materiais no Hospital/normas , Resíduos de Serviços de Saúde/efeitos adversos , Plásticos/classificação , Plásticos/síntese química , Resíduos de Serviços de Saúde/estatística & dados numéricos , Sonda de ProspecçãoRESUMO
OBJECTIVES: To identify and classify disposable hospital products containing polyvinyl chloride (PVC), including the search and evaluation of cost-effective sustainable alternative products free of PVC. METHODS: A descriptive observational analysis was performed, after classifying the latest research in major databases, and disposable products that could contain PVC. These were divided into 5 groups: cannulas, catheters, tubes, bags, and equipment, purchased in the period 2008-2009, differentiating between the technical and economic assessment of the materials. RESULTS: In the analysis of the composition of 492 articles selected, 234 (47.5%) contained PVC, and 19.4% were considered PVC-free alternatives, with only 11.3% of these being economically viable. CONCLUSIONS: This study highlights the advantages of the classification of PVC products, by showing that safe and efficient alternatives exist for some product lines that are consistent with patient safety and quality in the work by doctors.
Assuntos
Equipamentos Descartáveis/classificação , Hospitais , Plásticos/classificação , Cloreto de Polivinila , EspanhaRESUMO
This review of 68 studies compares the methodologies used for the identification and quantification of microplastics from the marine environment. Three main sampling strategies were identified: selective, volume-reduced, and bulk sampling. Most sediment samples came from sandy beaches at the high tide line, and most seawater samples were taken at the sea surface using neuston nets. Four steps were distinguished during sample processing: density separation, filtration, sieving, and visual sorting of microplastics. Visual sorting was one of the most commonly used methods for the identification of microplastics (using type, shape, degradation stage, and color as criteria). Chemical and physical characteristics (e.g., specific density) were also used. The most reliable method to identify the chemical composition of microplastics is by infrared spectroscopy. Most studies reported that plastic fragments were polyethylene and polypropylene polymers. Units commonly used for abundance estimates are "items per m(2)" for sediment and sea surface studies and "items per m(3)" for water column studies. Mesh size of sieves and filters used during sampling or sample processing influence abundance estimates. Most studies reported two main size ranges of microplastics: (i) 500 µm-5 mm, which are retained by a 500 µm sieve/net, and (ii) 1-500 µm, or fractions thereof that are retained on filters. We recommend that future programs of monitoring continue to distinguish these size fractions, but we suggest standardized sampling procedures which allow the spatiotemporal comparison of microplastic abundance across marine environments.
Assuntos
Monitoramento Ambiental/métodos , Plásticos/análise , Água do Mar/análise , Poluentes Químicos da Água/análise , Sedimentos Geológicos/análise , Plásticos/classificaçãoRESUMO
We investigated the plastics ingested by short-tailed shearwaters, Puffinus tenuirostris, that were accidentally caught during experimental fishing in the North Pacific Ocean in 2003 and 2005. The mean mass of plastics found in the stomach was 0.23 g per bird (n=99). Plastic mass did not correlate with body weight. Total PCB (sum of 24 congeners) concentrations in the abdominal adipose tissue of 12 birds ranged from 45 to 529 ng/g-lipid. Although total PCBs or higher-chlorinated congeners, the mass of ingested plastic correlated positively with concentrations of lower-chlorinated congeners. The effects of toxic chemicals present in plastic debris on bird physiology should be investigated.