Biodegradable Thermosensitive PLGA-PEG-PLGA Polymer for Non-irritating and Sustained Ophthalmic Drug Delivery.

Challenges of ophthalmic drug delivery arise from not only the limited solubility of hydrophobic therapeutics, but also the restricted permeability and fast clearance of drugs due to the complex anatomy and physiology of the eyes. Biodegradable thermosensitive polymer, poly(dl-lactide-co-glycolide-b-ethylene glycol-b-dl-lactide-co-glycolide) (PLGA-PEG-PLGA) is a desirable ophthalmic drug delivery system because it can be formulated into injectable solution which forms gel in situ to provide prolonged drug release. In this study, excellent biocompatibility of blank PLGA-PEG-PLGA (1800-1500-1800) thermogel was demonstrated with insignificant difference from saline noted in rat eye enucleation test, in vivo inflammation test upon topical instillation, and subconjunctival injection. After subconjunctival injection, thermogel formulations loaded with hydrophilic (rhodamine B) or hydrophobic (coumarin 6) fluorescent dyes were retained up to 4 weeks in eye tissues and significantly higher level was detected than rhodamine B solution or coumarin 6 suspension in weeks 3 and 4. Moreover, in vivo whole body imaging showed that dye-loaded (sulfo-cyanine 7 NHS ester, Cy7; or cyanine 7.5 alkyne, Cy7.5) thermogels had longer retention at the injection site and retarded release to other body parts than dye solutions. Generally, the release rate of hydrophobic dyes (coumarin 6 and Cy7.5) was much slower than that of the hydrophilic dyes (rhodamine B and Cy7) from the thermogel. In summary, the thermogel was safe for ophthalmic drug delivery and could deliver both hydrophobic and hydrophilic compounds for sustained drug release into eye tissues with single subconjunctival injection for better patient compliance and reduced risks on repeated injection.

Local Toxicity of Topically Administrated Thermoresponsive Systems: In Vitro Studies with In Vivo Correlation.

Thermoresponsive materials have the ability to respond to a small change in temperature-a property that makes them useful in a wide range of applications and medical devices. Although very promising, there is only little conclusive data about the cytotoxicity and tissue toxicity of these materials. This work studied the biocompatibility of three Food and Drug Administration approved thermoresponsive polymers: poly( N-isopropyl acrylamide), poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) tri-block copolymer, and poly(lactic acid-co-glycolic acid) and poly(ethylene glycol) tri-block copolymer. Fibroblast NIH 3T3 and HaCaT keratinocyte cells were used for the cytotoxicity testing and a mouse model for the in vivo evaluation. In vivo results generally showed similar trends as the results seen in vitro, with all tested materials presenting a satisfactory biocompatibility in vivo. pNIPAM, however, showed the highest toxicity both in vitro and in vivo, which was explained by the release of harmful monomers and impurities. More data focusing on the biocompatibility of novel thermoresponsive biomaterials will facilitate the use of existing and future medical devices.

Drug Delivery Nanoparticles: Toxicity Comparison in Retinal Pigment Epithelium and Retinal Vascular Endothelial Cells.

Multiple synthetic polymer nanoparticles (NPs) have been widely used as drug delivery systems. However, their toxicity to the retinal pigment epithelium and retinal endothelium remains unclear. In this study, we analyze the cytotoxic effects of three different kinds of NPs, made of poly lactic-co-glycolic acid (PLGA), polycaprolactone (PCL), and PEGylated PLGA (PEG-PLGA), in a retinal pigment epithelium cell line (ARPE-19) and in primary human retinal vascular endothelial cells (RVEC). PEG-PLGA NPs presented the lowest cytotoxicity on ARPE-19 cells and RVEC as assessed by MTT viability assay. While PLGA and PCL exhibited variable amounts of toxicity, no significant toxicity was observed when incubating cells with high PEG-PLGA concentrations (100 µg/ml), for up to 6 days. On both transmission electron microscopy and confocal microscopy, Rhodamine 6G-loaded PEG-PLGA NPs were observed intracellularly in multiple subcellular organelles. PEG-PLGA NPs are a potentially viable option for the treatment of eye diseases.

Mucoadhesive microparticles with a nanostructured surface for enhanced bioavailability of glaucoma drug.

Topical drug administration to the eye is limited by low drug bioavailability due to its rapid clearance from the preocular surface. Thus, multiple daily administrations are often needed, but patient compliance is low, hence a high chance of unsatisfactory treatment of ocular diseases. To resolve this, we propose mucoadhesive microparticles with a nanostructured surface as potential carriers for delivery of brimonidine, an ocular drug for glaucoma treatment. For sustained drug delivery, the microparticles were composed mainly of a diffusion-wall material, poly(lactic-co-glycolic acid) and a mucoadhesive polymer, polyethylene glycol, was used as an additive. Due to their nanostructured surface, the microparticles with a mucoadhesive material exhibited a 13-fold increase in specific surface area and could thus adhere better to the mucous layer on the eye, as compared with the conventional spherical microparticles. When loaded with brimonidine, the mucoadhesive microparticles with a nanostructured surface increased both drug bioavailability and its activity period by a factor of more than 2 over Alphagan P, a marketed eye drop of brimonidine.

Synthesis and characterisation of poly(lactide-co-glycolide) nanospheres using vitamin E emulsifier prepared through one-step oil-in-water emulsion and solvent evaporation techniques.

Nanoparticulate drug delivery systems are of considerable therapeutic interest for delivery of drugs across from the blood-brain barrier. In this study, the ability of sodium chloride (NaCl) and different percentages of a water-soluble form of natural vitamin E, on the formation of poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs), as a potential carrier for drug delivery, was investigated. According to the obtained results, by increasing the percentage of natural vitamin E, the average particle size decreased and the range of diameters came closer. After using 0.26 w/v % vitamin E, the average size of the PLGA particles became <100 nm. Moreover, the particles containing NaCl led to the formation of even smaller particles. In addition, no obvious cytotoxicity was observed at various natural vitamin E amounts in one and three days, and the modified PLGA NPs could be considered biocompatible since they showed a little decrease in cellular viability.

Assessment of PLGA-PEG-PLGA copolymer hydrogel for sustained drug delivery in the ear.

Temperature sensitive copolymer systems were previously studied using modified diffusion cells in vitro for intratympanic injection, and the PLGA-PEG-PLGA copolymer systems were found to provide sustained drug delivery for several days. The objectives of the present study were to assess the safety of PLGA-PEG-PLGA copolymers in intratympanic injection in guinea pigs in vivo and to determine the effects of additives glycerol and poloxamer in PLGA-PEGPLGA upon drug release in the diffusion cells in vitro for sustained inner ear drug delivery. In the experiments, the safety of PLGA-PEG-PLGA copolymers to inner ear was evaluated using auditory brainstem response (ABR). The effects of the additives upon drug release from PLGA-PEG-PLGA hydrogel were investigated in the modified Franz diffusion cells in vitro with cidofovir as the model drug. The phase transition temperatures of the PLGA-PEG-PLGA copolymers in the presence of the additives were also determined. In the ABR safety study, the PLGA-PEG-PLGA copolymer alone did not affect hearing when delivered at 0.05-mL dose but caused hearing loss after 0.1-mL injection. In the drug release study, the incorporation of the bioadhesive additive, poloxamer, in the PLGA-PEG-PLGA formulations was found to decrease the rate of drug release whereas the increase in the concentration of the humectant additive, glycerol, provided the opposite effect. In summary, the PLGA-PEG-PLGA copolymer did not show toxicity to the inner ear at the 0.05-mL dose and could provide sustained release that could be controlled by using the additives for inner ear applications.

Accumulated polymer degradation products as effector molecules in cytotoxicity of polymeric nanoparticles.

Polymeric nanoparticles (PNPs) are a promising platform for drug, gene, and vaccine delivery. Although generally regarded as safe, the toxicity of PNPs is not well documented. The present study investigated in vitro toxicity of poly-ε-caprolactone, poly(DL-lactic acid), poly(lactide-cocaprolactone), and poly(lactide-co-glycide) NPs and possible mechanism of toxicity. The concentration-dependent effect of PNPs on cell viability was determined in a macrophage (RAW 264.7), hepatocyte (Hep G2), lung epithelial (A549), kidney epithelial (A498), and neuronal (Neuro 2A) cell lines. PNPs show toxicity at high concentrations in all cell lines. PNPs were efficiently internalized by RAW 264.7 cells and stimulated reactive oxygen species and tumor necrosis factor-alpha production. However, reactive nitrogen species and interleukin-6 production as well as lysosomal and mitochondrial stability remained unaffected. The intracellular degradation of PNPs was determined by monitoring changes in osmolality of culture medium and a novel fluorescence recovery after quenching assay. Cell death showed a good correlation with osmolality of culture medium suggesting the role of increased osmolality in cell death.

In vitro biological study of gelatin/PLG nanocomposite using MCF-7 breast cancer cells.

This work aimed to evaluate new materials to be carried out as scaffolds using breast cancer cells MCF-7. These new nanocomposites were prepared through blending of gelatin with poly (DL-lactide-co-glycolide) (PLG) in presence of titanium nanowires (TiO2 ) and cartilage powder (CP). The prepared nanomaterials were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscope, and transmitting electron microscope. Moreover, the MCF-7 cells were in vitro tested with apoptosis/necrosis assay, micronucleus test, and DNA fragmentation and MMT assay. TiO2 nanowires and CP particles have diameters around 28-128 and 17-20 nm, respectively. These were coated with gelatin matrix. Seeding of MCF-7 cells with the prepared nanomaterials revealed high cell attachment to their surfaces and they were viable after 72 h. It has been shown that the prepared nanocomposites did not induce necrotic effects on MCF-7 cells; however, they induced a significant DNA fragmentation in comparison with the nontreated control cells.

A one-step process in preparation of cationic nanoparticles with poly(lactide-co-glycolide)-containing polyethylenimine gives efficient gene delivery.

A one-step preparation of nanoparticles with poly(lactide-co-glycolide) (PLGA) pre-modified with polyethylenimine (PEI) is better in requirements for DNA delivery compared to those prepared in a two-step process (preformed PLGA nanoparticles and subsequently coated with PEI). The particles were prepared by emulsification of PLGA/ethyl acetate in an aqueous solution of PVA and PEI. DLS, AFM and SEM were used for the size characteristics. The cytotoxicity of PLGA/PEI nanoparticles was detected by MTT assay. The transfection activity of the particles was measured using pEGFP and pß-gal plasmid DNA. Results showed that the PLGA/PEI nanoparticles were spherical and non-porous with a size of about 0.2 µm and a small size distribution. These particles had a positive zeta potential demonstrating that PEI was attached. Interestingly, the zeta potential of the particles (from one-step procedure) was substantially higher than that of two-step process and is ascribed to the conjugation of PEI to PLGA via aminolysis. The PLGA/PEI nanoparticles were able to bind DNA and the formed complexes had a substantially lower cytotoxicity and a higher transfection activity than PEI polyplexes. In conclusion, given their small size, stability, low cytotoxicity and good transfection activity, PLGA/PEI-DNA complexes are attractive gene delivery systems.

Biodegradable nanoparticles of mPEG-PLGA-PLL triblock copolymers as novel non-viral vectors for improving siRNA delivery and gene silencing.

Degradation of mRNA by RNA interference is one of the most powerful and specific mechanisms for gene silencing. However, insufficient cellular uptake and poor stability have limited its usefulness. Here, we report efficient delivery of siRNA via the use of biodegradable nanoparticles (NPs) made from monomethoxypoly(ethylene glycol)-poly(lactic-co-glycolic acid)-poly-l-lysine (mPEG-PLGA-PLL) triblock copolymers. Various physicochemical properties of mPEG-PLGA-PLL NPs, including morphology, size, surface charge, siRNA encapsulation efficiency, and in vitro release profile of siRNA from NPs, were characterized by scanning electron microscope, particle size and zeta potential analyzer, and high performance liquid chromatography. The levels of siRNA uptake and targeted gene inhibition were detected in human lung cancer SPC-A1-GFP cells stably expressing green fluorescent protein. Examination of the cultured SPC-A1-GFP cells with fluorescent microscope and flow cytometry showed NPs loading Cy3-labeled siRNA had much higher intracellular siRNA delivery efficiencies than siRNA alone and Lipofectamine-siRNA complexes. The gene silencing efficiency of mPEG-PLGA-PLL NPs was higher than that of commercially available transfecting agent Lipofectamine while showing no cytotoxicity. Thus, the current study demonstrates that biodegradable NPs of mPEG-PLGA-PLL triblock copolymers can be potentially applied as novel non-viral vectors for improving siRNA delivery and gene silencing.

Near-infrared dye-loaded PLGA nanoparticles prepared by spray drying for photoacoustic applications.

INTRODUCTION: Nanoparticulate contrast agents are of great interest for diagnostic applications with high resolution in medicine. Here we present polymer-based degradable nanoparticles exhibiting a near infrared (NIR) absorption suitable for photoacoustic imaging. METHODS: The nanoparticles were prepared by incorporation of indocyanine green (ICG) as NIR dye in poly[(rac-lactide)-co-glycolide] (PLGA) via an optimized spray drying process. By application of a multi-step centrifugation protocol, two different size fractions were achieved. The biocompatibitilty of the nanoparticles was tested in 2D cell cultures (human hepatocarcinoma cells and monkey kidney cells) using WST-1, BrdU and LDH assay. RESULTS: Spherical particles were obtained with a good yield (>81%), showing a high NIR-dye encapsulation efficiency (>98%). By multi-step centrifugation, two different size fractions with a mean diameter of 640 nm and 390 nm were obtained. Cytotoxicity studies of the synthesized ICG-loaded PLGA particles were performed. No cytotoxic effect on metabolic activity, proliferation, or membrane integrity was observed. CONCLUSION: The high optical absorption at the relevant NIR-wavelength around 800 nm in combination with absence of cytotoxicity qualifies the ICG-loaded PLGA particles as promising candidates for degradable photoacoustic contrast agents.

Entrapment of 5-fluorouracil into PLGA matrices using supercritical antisolvent processes.

OBJECTIVES: Two different supercritical antisolvent processes were performed to co-precipitate 5-fluorouracil (5-FU) and poly(lactide-co-glycolide) simultaneously. 5-FU is a hydrophilic antitumor agent, and is more effective when administered at a lower dose for a longer period of time. METHODS: Controlled-release polymeric systems of 5-FU were produced, and morphology, thermal behavior, in-vitro release and cytotoxicity of microparticles were analysed. KEY FINDINGS: Dissolution studies showed that 33% of drug was released in 21 days, which represents a long-lasting profile. To evaluate the efficacy of the released drug on cancer cells, the MTT assay cytotoxicity test was performed using human lung carcinoma A549 cell lines. There was no significant difference between the cell inhibition rates of the released drug and unprocessed 5-FU at the same drug concentration level. IC50 values were 69.12 mg/ml for unprocessed 5-FU and 68.71 mg/ml for the released drug. CONCLUSIONS: Application of supercritical processing for co-precipitation of 5-FU and PLGA provided mild and non-aqueous conditions, so the hydrophilic drug incorporated in the polymer had good stability during the process.

Preparation of biocompatible, UV-cured fumarated poly(ether-ester)-based tissue-engineering hydrogels.

The aim of this study was to develop biodegradable, photo-polymerizable in situ gel-forming systems prepared from a fumaric acid monoethyl ester (FAME) modified poly(lactide-co-glycolide) (PLGA) co-polymer. By reacting lactide and glycolide in the presence of stannous octoate as a catalyst and 2-ethyl,2-hydroxymethyl 1,3-propanediol as an initiator, hydroxyl terminated branched PLGA was synthesized. Afterwards, at room temperature hydroxyl terminated branched PLGA was reacted with fumaric acid monoethyl ester (FAME). N,N'-dicyclohexylcarbodiimide and triethylamine were used as a coupling agent and catalyst, respectively. The gel percentage, equilibrium mass swelling, degradation profile and polymerization kinetics of the hydrogels were investigated. All of the results were influenced by the amount of FAME modified PLGA co-polymer. Biocompatibility of the hydrogels was examined by using MTT cytotoxicity assay. According to the results, hydrogels are biocompatible and cell viability percentage depends on the amount of PLGA co-polymer. While the amount was 15% in hydrogel composition, cell viability was 100%, but after increasing the PLGA co-polymer amount to 30% the viability reduced to 78%.

Experimental intracameral injection of vancomycin microparticles in rabbits.

PURPOSE: To evaluate the in vivo toxicity and efficacy of previously developed poly-(lactide-co-glycolide)-vancomycin-based microparticles (V-MPLs) for eventual use for endophthalmitis prophylaxis during cataract surgery. METHODS: The intraocular vancomycin concentration profile was evaluated after V-MPL injection into the anterior chamber of rabbit eyes. The toxicology of V-MPLs versus MPLs alone was tested by corneal cellular counting and retinal histology. The prophylactic efficacy of the V-MPLs was evaluated by bacterial counts after introducing contaminated intraocular lenses (IOLs) together with the V-MPLs into one anterior chamber of phakic rabbit eyes or without V-MPLs in control rabbit eyes. RESULTS: Intraocular V-MPLs produced effective vancomycin concentrations over at least 6 hours. Corneal counts revealed no significant increase in dead cells. Retinal toxicity manifested as inflammation 3 hours after injection, reaching its maximum between 12 hours and 24 hours, decreasing by 48 hours, and completely disappearing at 72 hours. Inflammation was similar between V-MPLs and MPLs. Untreated eyes implanted with highly infected IOLs showed severe, reproducible endophthalmitis. No sign of infection was observed with infected IOLs and concomitant V-MPL treatment, supported by bacterial counts showing a significant decrease in colony-forming Staphylococcus epidermidis units in the anterior chamber and on the implant surfaces within 6 hours. CONCLUSIONS: The present study demonstrated the release and toxicologic properties of the authors' newly developed V-MPLs in vivo. In addition, the rabbit model shows that V-MPLs are effective in reducing the risk of experimental endophthalmitis.

Gross and histologic evaluation of 5 suture materials in the skin and subcutaneous tissue of the California sea hare (Aplysia californica).

Invertebrates are increasing in their importance to both the public and private aquarium trade and play a vital role in biomedical research. Surgical techniques have become an important approach to obtaining data and maintaining good health in both of these areas. However, studies examining tissue reaction to suture material in invertebrates are lacking. The current study evaluated the gross and histologic reaction of Aplysia californica to 5 commonly used suture materials, including polydioxanone, black braided silk, polyglactin 910, monofilament nylon, and monofilament poliglecaprone. Histologic samples were graded on the amount of edema (score, 1 to 4), inflammation (1 to 4), and granuloma formation (1 to 4) present, and a final overall histology score (1 to 6) was assigned to each sample. Compared with untreated control tissue, all suture materials caused significantly increased tissue reaction, but the overall histology score did not differ among the suture materials. Silk was the only suture that did not have a significantly increased granuloma score when compared with the control. Although none of the suture materials evaluated seemed clearly superior for use in Aplysia, we recommend silk because of its less robust granuloma induction, which is favorable in a clinical and research setting.

Metronidazole-loaded bioabsorbable films as local antibacterial treatment of infected periodontal pockets.

BACKGROUND: Periodontal disease is infectious in nature and leads to an inflammatory response. It arises from the accumulation of subgingival bacterial plaque and leads to the loss of attachment, increased probing depth, and bone loss. It is one of the world's most prevalent chronic diseases. In this study we developed and studied metronidazole-loaded 50/50 poly(DL-lactide-co-glycolide) (PDLGA), 75/25 PDLGA, and poly(DL-lactic acid) (PDLLA) films. These films are designed to be inserted into the periodontal pocket and treat infections with controlled-release metronidazole for >or=1 month. METHODS: The structured films were prepared using the solution-casting technique. Concentrated solutions and high solvent-evaporation rates were used to get most of the drug located in the bulk, i.e., in whole film's volume. The effects of copolymer composition and drug content on the release profile, cell growth, and bacterial inhibition were investigated. RESULTS: The PDLLA and 75/25 PDLGA films generally exhibited a low- or medium-burst release followed by a moderate release at an approximately constant rate, whereas the 50/50 PDLGA films exhibited a biphasic release profile. The drug released from films loaded with 10% weight/weight metronidazole resulted in a significant decrease in bacterial viability within several days. When exposed to human gingival fibroblasts in cell culture conditions, these films maintained their normal fibroblastic features. CONCLUSIONS: This study enabled the understanding of metronidazole-release kinetics from bioabsorbable polymeric films. The developed systems demonstrated good biocompatibility and the ability to inhibit Bacteroides fragilis growth; therefore, they may be useful in the treatment of periodontal diseases.

Controlled release of growth hormone from thermosensitive triblock copolymer systems: In vitro and in vivo evaluation.

The purpose of this study was to design injectable controlled release polymer formulations for growth hormone using triblock copolymer PLGA-PEG-PLGA (MW 1400-1000-1400). Porcine growth hormone (pGH) formulations were prepared by adding pGH into 30% (w/v) aqueous solution of triblock copolymer. pGH concentrations in the released samples were determined using a standard MicroBCA method. In vitro release studies demonstrated that there were no initial burst of pGH from both formulations containing a low dose (0.12%, w/v) and a high dose (0.42%, w/v) of pGH. In vivo absorption study of pGH in rabbits showed that constant serum levels of exogenous pGH (3-7 ng/mL from high dose and 2-4 ng/mL from low dose) were detected for nearly 4 weeks from delivery systems upon single subcutaneous injection. The absolute bioavailability of pGH enhanced from the thermosensitive polymer-based systems, which was approximately 5-15-fold those of subcutaneous aqueous solution. MTT assay and light microscopy were used to investigate the in vitro and in vivo biocompatibility of thermosensitive polymer delivery systems, respectively. Both in vitro and in vivo results support the biocompatible nature of these polymer delivery systems. Thus, the triblock copolymer used in this study was able to control the release of incorporated pGH in vitro and in vivo for longer duration and the delivery system was biocompatible.

Thermosensitive polymers: synthesis, characterization, and delivery of proteins.

Three triblock copolymers based on the poly(lactide) or poly(lactide-co-glycolide) and poly(ethylene glycol) or poly(ethylene oxide) blocks were synthesized and characterized. The weight average molecular weight and number average molecular weight were determined by gel permeation chromatography and proton nuclear magnetic resonance spectroscopy, respectively. Fourier transform infrared spectroscopy was used to determine the completion of synthesis of polymers. Thermoreversible sol-gel transition temperature and concentration were determined by an inverted tube method. Two formulations each of three synthesized polymers containing 5% (w/v) of lysozyme or bromelain but differing in polymer concentrations (20-30%, w/v) were prepared and studied for in vitro release of the incorporated protein. In vitro biocompatibility of the delivery systems was studied by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) cell viability assay. Biological activities of lysozyme and bromelain were determined by enzyme activity assays. Critical gelling concentrations were found in the range of 20-30% (w/v). In vitro biocompatibility study showed that all the formulations were biocompatible. Increasing the polymer concentration led to a decrease in burst release and extended the in vitro release of proteins. Furthermore, biological activities of lysozyme and bromelain in released samples were found to be significantly (p<0.05) greater in comparison to the control. Thus, the above thermosensitive polymers were able to deliver proteins in biologically active forms at a controlled rate for 2-8 weeks.

Non-ionic amphiphilic biodegradable PEG-PLGA-PEG copolymer enhances gene delivery efficiency in rat skeletal muscle.

Naked plasmid DNA (pDNA)-based gene therapy has low delivery efficiency, and consequently, low therapeutic effect. We present a biodegradable nonionic triblock copolymer, PEG(13)-PLGA(10)-PEG(13), to enhance gene delivery efficiency in skeletal muscle. Effects of PEG(13)-PLGA(10)-PEG(13) on physicochemical properties of pDNA were evaluated by atomic force microscopy (AFM) imaging, gel electrophoresis and zeta-potential analysis. AFM imaging suggested a slightly compacted structure of pDNA when it was mixed with the polymer, while zeta-potential measurement indicated an increased surface potential of negatively charged pDNA. PEG(13)-PLGA(10)-PEG(13) showed a relatively lower toxicity compared to Pluronic P85 in a skeletal muscle cell line. The luciferase expression of pDNA delivered in 0.25% polymer solution was up to three orders of magnitude more than branched polyethylenimine (bPEI(25 k))/pDNA and three times more than that of naked pDNA five days after intramuscular administration. This in vivo gene delivery enhancement was also observed displaying a two-fold higher expression of human vascular endothelial growth factor (VEGF). Based on fluorescence labeled pDNA distribution, it is speculated that the greater diffusivity of PEG(13)-PLGA(10)-PEG(13)/pDNA compared to bPEI(25 k)/pDNA accounts for better transfection efficiency in vivo. To summarize, combining PEG(13)-PLGA(10)-PEG(13) with pDNA possesses the potential to improve gene delivery efficiency in skeletal muscle.

Evaluation of the gross and histologic reactions to five commonly used suture materials in the skin of the African clawed frog (Xenopus laevis).

Surgical harvest of Xenopus laevis oocytes for developmental research is a common procedure that requires closure of a 0.5- to 2.0-cm incision with suture material. Although such harvests are a frequent practice, little published information exists to provide guidance regarding the most appropriate suture material for wound closure in laboratory amphibians. To determine which suture material elicits the least response in amphibian skin, we used Xenopus laevis as a model to investigate the gross and histologic tissue reactions to 5 commonly used suture materials-3-0 silk, monofilament nylon, polydioxanone, polyglactin 910, and chromic gut. The skin reacted in 3 ways to suture material, showing edema, epidermal changes, and inflammation. Although the gross reactions to monofilament nylon, polydioxanone, and polyglactin 910 were clinically indistinguishable and were associated with lowest gross reaction scores, monofilament nylon elicited the least histologic reaction and therefore seems to be the most appropriate choice for use in amphibian skin.