Optimized Sensory Units Integrated in the Chiton Shell.

The first step for animals to interact with external environment is to sense. Unlike vertebrate animals with flexibility, it is challenging for ancient animals that are less flexible especially for mollusca with heavy shells. Chiton, as an example, has eight overlapping shells covering almost the whole body, is known to incorporate sensory units called aesthetes inside the shell. We used micro-computed tomography combined with quantitative image analysis to reveal the optimized shell geometry to resist force and the aesthetes' global distribution at the whole animal levels to facilitate sense from diverse directions both in the seawater and air. Additionally, shell proteomics combined with transcriptome reveals shell matrix proteins responsible for shell construction and potentially sensory function, highlighting unique cadherin-related proteins among mollusca. Together, this multi-level evidence of sensory units in the chiton shell may shed light on the formation of chiton shells and inspire the design of hard armor with sensory function.

HES and Mox genes are expressed during early mesoderm formation in a mollusk with putative ancestral features.

The mesoderm is considered the youngest of the three germ layers. Although its morphogenesis has been studied in some metazoans, the molecular components underlying this process remain obscure for numerous phyla including the highly diverse Mollusca. Here, expression of Hairy and enhancer of split (HES), Mox, and myosin heavy chain (MHC) was investigated in Acanthochitona fascicularis, a representative of Polyplacophora with putative ancestral molluscan features. While AfaMHC is expressed throughout myogenesis, AfaMox1 is only expressed during early stages of mesodermal band formation and in the ventrolateral muscle, an autapomorphy of the polyplacophoran trochophore. Comparing our findings to previously published data across Metazoa reveals Mox expression in the mesoderm in numerous bilaterians including gastropods, polychaetes, and brachiopods. It is also involved in myogenesis in molluscs, annelids, tunicates, and craniates, suggesting a dual role of Mox in mesoderm and muscle formation in the last common bilaterian ancestor. AfaHESC2 is expressed in the ectoderm of the polyplacophoran gastrula and later in the mesodermal bands and in putative neural tissue, whereas AfaHESC7 is expressed in the trochoblasts of the gastrula and during foregut formation. This confirms the high developmental variability of HES gene expression and demonstrates that Mox and HES genes are pleiotropic.

The Iron-Responsive Genome of the Chiton Acanthopleura granulata.

Molluscs biomineralize structures that vary in composition, form, and function, prompting questions about the genetic mechanisms responsible for their production and the evolution of these mechanisms. Chitons (Mollusca, Polyplacophora) are a promising system for studies of biomineralization because they build a range of calcified structures including shell plates and spine- or scale-like sclerites. Chitons also harden the calcified teeth of their rasp-like radula with a coat of iron (as magnetite). Here we present the genome of the West Indian fuzzy chiton Acanthopleura granulata, the first from any aculiferan mollusc. The A. granulata genome contains homologs of many genes associated with biomineralization in conchiferan molluscs. We expected chitons to lack genes previously identified from pathways conchiferans use to make biominerals like calcite and nacre because chitons do not use these materials in their shells. Surprisingly, the A. granulata genome has homologs of many of these genes, suggesting that the ancestral mollusc may have had a more diverse biomineralization toolkit than expected. The A. granulata genome has features that may be specialized for iron biomineralization, including a higher proportion of genes regulated directly by iron than other molluscs. A. granulata also produces two isoforms of soma-like ferritin: one is regulated by iron and similar in sequence to the soma-like ferritins of other molluscs, and the other is constitutively translated and is not found in other molluscs. The A. granulata genome is a resource for future studies of molluscan evolution and biomineralization.

Seasonal changes in stress biomarkers of an exotic coastal species - Chaetopleura angulata (Polyplacophora) - Implications for biomonitoring.

Knowledge on baseline values of stress biomarkers in natural conditions is urgent due to the need of reference values for monitoring purposes. Here we assessed the cellular stress response of the chiton Chaetopleura angulata in situ. Biomarkers commonly used in environmental monitoring (heat shock protein 70kDa, total ubiquitin, catalase, glutathione-S-transferase, superoxide-dismutase, lipid peroxidation) were analyzed in the digestive system, gills and muscle of C. angulata, under spring and summer conditions in order to assess seasonal tissue-specific responses. Season had an effect on all targeted organs, especially affecting the digestive system which displayed clear seasonal clusters. The respective Integrated Biomarker Response (IBR) showed a 7.2-fold seasonal difference. Muscle and gills showed similar IBRs between seasons making them appropriate organs to monitor chemical pollution as they were less responsive to seasonal variation. The most stable biomarkers in these organs were ubiquitin and superoxide-dismutase thus being reliable for monitoring purposes.

Control of chitin nanofiber production by the lipid-producing diatom Cyclotella Sp. through fed-batch addition of dissolved silicon and nitrate in a bubble-column photobioreactor.

Diatoms are single-celled algae that make cell walls of nanopatterned biogenic silica called frustules through metabolic uptake of dissolved silicon and its templated condensation into biosilica. The centric marine diatom Cyclotella sp. also produces intracellular lipids and the valued coproduct chitin, an N-acetyl glucosamine biopolymer that is extruded from selected frustule pores as pure nanofibers. The goal of this study was to develop a nutrient feeding strategy to control the production of chitin nanofibers from Cyclotella with the coproduction of biofuel lipids. A two-stage phototrophic cultivation process was developed where Stage I set the cell suspension to a silicon-starved state under batch operation, and Stage II continuously added silicon and nitrate to the silicon-starved cells to enable one more cell doubling to 4 × 106 cells mL-1 . The silicon delivery rate was set to enable a silicon-limited cell division rate under cumulative delivery of 0.8 mM Si and 1.2 mM nitrate (1.5:1 mol N/mol Si) over a 4- to 14-day addition period. In Stage II, both cell number and chitin production were linear with time. Cell number and the specific chitin production rate increased linearly with increasing silicon delivery rate to achieve cumulative product yields of 13 ± 1 mg chitin/109 cells and 33 ± 3 mg lipid/109 cells. Therefore, chitin production is controlled through cell division, which is externally controlled through silicon delivery. Lipid production was not linearly correlated to silicon delivery and occurred primarily during Stage I, just after the complete co-consumption of both dissolved silicon and nitrate. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:407-415, 2017.

Microstructure and self-sharpening of the magnetite cap in chiton tooth.

The magnetite cap of chiton tooth (Acanthochiton rubrolineatus) was studied with SEM. Three microstructurally distinct regions were recognized: Region I, close to the anterior surface of the cusp and composed of thick rod microstructure units; Region III, close to the posterior surface and composed of fine fibers; and Region II, sandwiched between Regions I and II and composed of thin sheets. The microstructure units in the three regions constitute a continuous and integrated architecture component. The hardness of Regions I and II was measured to be Hv270 and Hv490, respectively. Based on these microstructure observation and hardness data, the abrasive behavior and microstructural mechanism of self-sharpening of the chiton tooth were discussed in the paper. The self-sharpening was attributed to the combined effect of the hardness and the texture orientation of the microstructure units in Regions I and II.

Three-dimensional structure of the shell plate assembly of the chiton Tonicella marmorea and its biomechanical consequences.

This study investigates the three-dimensional structure of the eight plate exoskeletal (shell) assembly of the chiton Tonicella marmorea. X-ray micro-computed tomography and 3D printing elucidate the mechanism of conformational change from a passive (slightly curved, attached to surface) to a defensive (rolled, detached from surface) state of the plate assembly. The passive and defensive conformations exhibited differences in longitudinal curvature index (0.43 vs. 0.70), average plate-to-plate overlap (∼62% vs. ∼48%), cross-sectional overlap heterogeneity (60-82.5% vs. 0-90%, fourth plate), and plate-to-plate separation distance (100% increase in normalized separation distance between plates 4 and 5), respectively. The plate-to-plate interconnections consist of two rigid plates joined by a compliant, actuating muscle, analogous to a geometrically structured shear lap joint. This work provides an understanding of how T. marmorea achieves the balance between mobility and protection. In the passive state, the morphometry of the plates and plate-to-plate interconnections results in an approximately continuous curvature and constant armor thickness, resulting in limited mobility but maximum protection. In the defensive state, the underlying soft tissues gain protection and the chiton gains mobility through tidal flow, but regions of vulnerability open dorsally, due to the increase in plate-to-plate separation and decrease in plate-to-plate overlap. Lastly, experiments using optical and scanning electron microscopy, mercury porosimetry, and Fourier-transform infrared spectroscopy explore the microstructure and spatial distribution of the six layers within the intermediate plates, the role of multilayering in resisting predatory attacks, and the detection of chitin as a major component of the intra-plate organic matrix and girdle.

Ultrastructure of the epithelial cells associated with tooth biomineralization in the chiton Acanthopleura hirtosa.

The cusp epithelium is a specialized branch of the superior epithelium that surrounds the developing teeth of chitons and is responsible for delivering the elements required for the formation of biominerals within the major lateral teeth. These biominerals are deposited within specific regions of the tooth in sequence, making it possible to conduct a row by row examination of cell development in the cusp epithelium as the teeth progress from the unmineralized to the mineralized state. Cusp epithelium from the chiton Acanthopleura hirtosa was prepared using conventional chemical and microwave assisted tissue processing, for observation by light microscopy, conventional transmission electron microscopy (TEM) and energy filtered TEM. The onset of iron mineralization within the teeth, initiated at row 13, is associated with a number of dramatic changes in the ultrastructure of the apical cusp cell epithelium. Specifically, the presence of ferritin containing siderosomes, the position and number of mitochondria, and the structure of the cell microvilli are each linked to aspects of the mineralization process. These changes in tissue development are discussed in context with their influence over the physiological conditions within both the cells and extracellular compartment of the tooth at the onset of iron mineralization.