Three-Dimensional Printed Total Talus Replacement with a Concurrent Total Ankle Arthroplasty as a Personalized Approach for Advanced Ankle Osteoarthritis A Case Repor.

Ankle arthritis is becoming more common and can be pain-ful and debilitating. As the disease progresses, degenera-tive cystic changes may be found in the distal fibula, distal tibia, and talus. After failure of non-operative modalities, arthrodesis is often considered the surgical intervention of choice, but this leaves the patient with reduced range of motion, altered gait, and can negatively impact adjacent joints of the foot. Total ankle arthroplasty has been found to be an effective surgical option for ankle arthritis but is contraindicated in patients with talar collapse. When this is the case, a more personalized approach for preserving ankle motion is necessary. We present the case of a 65-year-old male with severe right ankle arthritis and talar collapse treated with a custom three-dimensionally printed talus and concurrent total ankle replacement with 2-year follow-up.

Assessment of bone ingrowth around beaded coated tibial implant for total ankle replacement using mechanoregulatory algorithm.

The long-term performance of porous coated tibial implants for total ankle replacement (TAR) primarily depends on the extent of bone ingrowth at the bone-implant interface. Although attempts were made for primary fixation for immediate post-operative stability, no investigation was conducted on secondary fixation. The aim of this study is to assess bone ingrowth around the porous beaded coated tibial implant for TAR using a mechanoregulatory algorithm. A realistic macroscale finite element (FE) model of the implanted tibia was developed based on computer tomography (CT) data to assess implant-bone micromotions and coupled with microscale FE models of the implant-bone interface to predict bone ingrowth around tibial implant for TAR. The macroscale FE model was subjected to three near physiological loading conditions to evaluate the site-specific implant-bone micromotion, which were then incorporated into the corresponding microscale model to mimic the near physiological loading conditions. Results of the study demonstrated that the implant experienced tangential micromotion ranged from 0 to 71 µm with a mean of 3.871 µm. Tissue differentiation results revealed that bone ingrowth across the implant ranged from 44 to 96 %, with a mean of around 70 %. The average Young's modulus of the inter-bead tissue layer varied from 1444 to 4180 MPa around the different regions of the implant. The analysis postulates that when peak micromotion touches 30 µm around different regions of the implant, it leads to pronounced fibrous tissues on the implant surface. The highest amount of bone ingrowth was observed in the central regions, and poor bone ingrowth was seen in the anterior parts of the implant, which indicate improper osseointegration around this region. This macro-micro mechanical FE framework can be extended to improve the implant design to enhance the bone ingrowth and in future to develop porous lattice-structured implants to predict and enhance osseointegration around the implant.

Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report.

RATIONALE: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. PATIENT CONCERNS: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. DIAGNOSES: The giant cell tumor invades the patient's MCP joint in an index proximal phalanx. INTERVENTIONS: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient's costal osteochondral graft during the operation. OUTCOMES: After 6 months of rehabilitation, the patient's finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. LESSONS: The customized prototyping technique has the potential to replica the original patient's bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.

Mid- and long-term clinical results of the Elektra and Moovis prosthesis for trapeziometacarpal joint replacement.

BACKGROUND: Total joint arthroplasty as a surgical treatment option for trapeziometacarpal joint arthritis is recently revived. The aim of this study is to report on mid- and long-term results of the Elektra (single-mobility) and Moovis (dual-mobility) prosthesis for treatment of primary thumb carpometacarpal joint arthritis. METHODS: In this retrospective, monocentric, descriptive cohort study, 31 prostheses were evaluated that were implanted by a single surgeon in 26 patients between 2009 and 2019. Indication for surgery was trapeziometacarpal joint osteoarthritis (Eaton/Littler Stage II and III). Clinical and radiological follow-up was performed at a minimum of 24 months. The postoperative assessment included range of motion, pain, strength as well as functional scores (DASH, MHQ). Implant survival and complications were the primary endpoints. RESULTS: 10 Elektra and 21 Moovis prostheses were implanted between 2009 and 2019 with a mean follow-up of 74.2 months in the Elektra and 41.4 months in the Moovis group. The average patients' age at surgery was 64 years. Postoperative pain levels (VAS 0-10) were below 2 at rest and under stress in both groups. Grip/pinch strength and range of motion showed results comparable to the contralateral hand. Opposition was excellent with an average Kapandji index of 9.6 in both groups. Elektra achieved slightly better functional scores in the DASH and MHQ score. Satisfaction was high in both groups, and 96% of the patients would recommend the procedure. Metacarpophalangeal hyperextension > 15° was seen in 3 patients per group preoperatively and was corrected to < 5° post-surgery. 3 Elektra prostheses were revised due to cup loosening and dislocation for cup and/or neck replacement or secondary trapeziectomy. 1 Moovis prosthesis was revised with an exchange of the neck to a larger size due to restricted movement. After the mean follow-up of 7.9 years in Elektra and 3.5 years in MOOVIS, cumulative survival was 68.6% vs. 95.2%, respectively. CONCLUSIONS: In this mid- to long-term retrospective analysis, total joint arthroplasty in primary trapeziometacarpal joint arthritis results in low pain levels, excellent mobility and clinical function. Patient satisfaction is overall high. While revision due to cup loosening occurred more often in patients with single-mobility implants, no cases of dislocation or loosening of components were observed in the dual-mobility group. TRIAL REGISTRATION: The study was conducted in accordance with the Declaration of Helsinki, and approved by the Ethics Committee of the Medical Faculty of Heidelberg University, reference number S-150/2020.

Implant Choice May Reduce the Risk of Early Mechanical Failure in Total Ankle Replacement.

BACKGROUND: Total ankle replacements (TARs) have rapidly advanced in terms of volume, technique, design, and indications. However, TARs are still at risk for early mechanical failure and revision. Prior studies have investigated potential risk factors for failure, but have been limited to smaller series or older implants. This study sought to identify risk factors for early mechanical failure in modern TAR. METHODS: This is a retrospective study of a single-institution registry. Five surgeons contributed cases involving patients who underwent a primary TAR with any implant. Implants were grouped on the basis of the type of fixation. The primary outcome was early mechanical failure (revision with component removal for a non-infectious etiology, that is, subsidence, aseptic loosening, and/or malalignment). Logistic regression determined the effects of age, weight, hindfoot arthrodesis, implant type, and radiographic deformity on failure. RESULTS: The 731 included patients had a mean follow-up of 2.7 years. Ten percent (71 patients) had hindfoot arthrodesis. There were 33 mechanical failures (4.5%) at a mean of 1.7 years after the index surgical procedure. Our model demonstrated that hindfoot arthrodesis was associated with 2.7 times greater odds of failure (p = 0.045), every 10 kg of body weight increased the odds of tibial-sided failure by 1.29 times (p = 0.039), and implants with more extensive tibial fixation (stems or keels) lowered the odds of tibial failure by 95% (p = 0.031). CONCLUSIONS: In patients with uncontrollable risk factors (hindfoot arthrodesis) or risk factors that may or may not be modifiable by the patient (weight), implants with more robust tibial fixation may be able to reduce the risk of early mechanical failure. Further research is warranted to support efforts to decrease early failure in TAR. LEVEL OF EVIDENCE: Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Arthroscopic reduction and rigid fixation of the anteriorly displaced temporomandibular joint disc without reduction using titanium screw: a case series.

OBJECTIVES: To evaluate the effectiveness of arthroscopic reduction and rigid fixation (ARRF) using a suture-free titanium screw as a treatment approach to temporomandibular joint's (TMJ) anterior disc displacement without reduction (ADDwoR) and assess its impact on clinical outcomes, including improvements in symptoms related to TMJ disorders. MATERIALS AND METHODS: A series of twenty patients presented to the Department of Orthognathic and Temporomandibular Surgery at West China Hospital of Stomatology between September 2022 and January 2023, complaining of symptoms such as pain, clicking, and limited mouth opening. Standard magnetic resonance image (MRI) imaging T1 and T2 sequences in both sagittal and coronal views study with closed and maximal open mouth positions were taken preoperatively to assess the disc's position, integrity, and shape. Also, cone-beam computed tomography (CBCT) scans images to find any degenerative changes and evaluate the condylar bone's features and volume. Additionally, the clinical examination assesses limited oral opening, mechanical pain, and the presence of any noises such as clicking and crepitus. All cases were treated under general anesthesia using the arthroscopic release, reduction, and rigid fixation of the TMJ's ADDwoR to establish a normal disc-condyle relationship and to restore the functional position. RESULTS: Patients' symptoms, such as pain and mouth opening, improved significantly following the arthroscopic treatment. Postoperative MRI and CBCT imaging follow-up conducted at 6 months demonstrated the stable position of the reduced TMJ disc and the fixation screw. Notably, none of the patients exhibited signs of relapse during this follow-up period. CONCLUSION: Overall, the ARRF of TMJ's ADDwoR using a suture-free titanium screw proved to be safe and provides satisfactory results, in addition to the several advantages of using suture-free titanium screws, such as biocompatibility, strong fixation, and durability. However, it is a technically demanding procedure requiring extensive, long-term training. CLINICAL RELEVANCE: ARRF using a cost-effective fixation titanium screw to treat ADDwoR emerges as a clinically effective minimally invasive approach.

Simultaneous standard total joint prosthesis reconstruction with SSRO and Le Fort I osteotomy in the treatment of unilateral temporomandibular joint ankylosis with jaw deformity: a case cohort study.

OBJECTIVE: Unilateral temporomandibular joint ankylosis with jaw deformity (UTMJAJD) may require simultaneous total joint prosthesis (TJP) reconstruction, sagittal split ramus (SSRO), and Le Fort I osteotomies. The purpose of this study was to evaluate outcomes in patients treated with these procedures. METHODS: Patients diagnosed UTMJAJD between 2016 and 2018 were selected for the study. Mandible-first procedure was performed after ankylosis release with TJP on the ankylosed side and SSRO on the contralateral side. Le Fort I osteotomy with and without genioplasty was lastly performed. Maximal incisor opening (MIO), facial symmetry, and jaw and condyle stability were compared before, after operation, and during follow-ups. RESULTS: Seven patients were included in the study. Their average chin deviation was 9.5 ± 4.2 mm, and maxillary cant was 5.1 ± 3.0°. After operation, jaw deformity significantly improved, with chin deviation corrected 7.6 ± 4.1 mm (p = 0.015) and advanced 5.9 ± 2.5 mm (p = 0.006). After an average follow-up of 26.6 ± 17.1 months, MIO significantly increased from 11.4 ± 9.3 to 35.7 ± 2.6 mm (p = 0.000). The occlusion was stable with no significant positional or rotational changes of the jaw (p > 0.05). There was no obvious condylar resorption during follow-ups. CONCLUSION: Simultaneous TJP reconstruction, SSRO, and Le Fort I osteotomy are reliable and effective methods for the treatment of UTMJAJD.

[Influencing factors on effectiveness of reverse total shoulder arthroplasty].

Objective: To summarize the influencing factors on the effectiveness of reverse total shoulder arthroplasty (RTSA), so as to provide reference for clinical treatment. Methods: The related research literature of RTSA at home and abroad was extensively consulted, and the factors that may affect the effectiveness were summarized from the aspects of surgical technique, muscle condition, general condition of patients, psychological expectation, and lifestyle. Results: For surgical techniques, different surgical approaches have their own advantages. The glenoid notch, poor bone ingrowth, increased bone resorption, and infection would lead to the loosening of glenoid prosthesis. In addition, the neck shaft angle and inclination angle of humeral prosthesis affect the occurrence of glenoid notch and the range of motion of joint internal/external rotation after operation, respectively. For muscle condition, the quality of teres minor and deltoid muscle has an important influence on joint stability after operation. Moderate increase of deltoid muscle tension can improve joint mobility after operation, and suture repair of subscapular tendon during operation can relieve joint pain and improve function, range of motion, and strength. For the general condition of patients, gender, age, and body mass index are all related to postoperative joint function and complications, and different occupations and postoperative exercise levels affect the recovery. The patients with severe degenerative diseases, poor preoperative function, and long disease duration have lower expectations and higher satisfaction with the effectiveness, and bad lifestyle has a negative impact on the effectiveness. Conclusion: The effectiveness of RTSA is related to surgical technique, muscle condition, general condition of patients, psychological expectation, and lifestyle. In order to avoid the loosening of glenoid prosthesis, the operator should choose humeral prosthesis with small neck shaft angle and large glenoid ball and put them down and inclined inferiorly during operation, and choose appropriate approach to eliminate space with drainage to reduce the risk of infection. After operation, patients should avoid activities that generate high anterior and posterior shear forces. In addition, the humeral prosthesis with a inclination angle of 10°-20° can achieve the best balance between the range of internal rotation and external rotation after operation. Proper deltoid tension can maintain joint stability and good range of motion. Suture of subscapular tendon is recommended.

Virtual Surgical Planning for Temporomandibular Joint Reconstruction with Stock TMJ Prostheses: Pilot Study.

The temporomandibular joint (TMJ) is one of the most complex joints in the human anatomy. In advanced degenerative stages, conservative or minimally invasive surgical therapies have failed to restore joint function, and joint replacement with prostheses has been required. Stock prostheses, compared to custom-made prostheses, are much less expensive and require less pre-operative preparation time. Four patients followed for years for temporomandibular dysfunction and previously operated on by arthroscopy or open joint surgery that have been reconstructed with stock TMJ prostheses (STMJP) through virtual surgical planning (VSP) and an STL model with surgical and positioning guides were included. The median follow-up was 15 months; the median number of previous TMJ surgeries was 2. The mean preoperative MIO was 24.6 mm and at longest follow-up was 36.4 mm. The median preoperative TMJ pain score was 8, and the median postoperative TMJ pain was 3. All patients have improved their mandibular function with a clear improvement of their initial situation. In conclusion, we believe that stock TMJ prostheses with virtual surgical planning and surgical guides are a good alternative for TMJ reconstruction at the present time. Nonetheless, prospective and randomized trials are required with long-term follow up to assess their performance and safety.

High Fracture Rate of AVANTA Silicone Implant Following Arthroplasty of the Thumb MCP Joint of Rheumatoid Arthritis Patients with Boutonniere Deformities.

We retrospectively investigated the mid-term outcomes of arthroplasty using the AVANTA silicone implant for thumb metacarpophalangeal (MCP) joints with boutonniere deformity in patients with rheumatoid arthritis (RA). This study involved 36 thumbs of 33 RA patients with a mean follow-up period of 5.1 years (range, 2.0-13.3). Postoperatively, the mean extension was significantly increased and the mean flexion was significantly decreased (p<0.001, p<0.001, respectively), resulting in the mean arc of range of motion (ROM) shifting in the direction of extension after surgery. Implant fracture was observed in 10 thumbs (28%), and 4 of these (11%) underwent revision surgery. The survivorship with implant fracture and revision surgery as endpoints were 73.4% and 91.8% at 5 years, respectively. The preoperative arc of ROM and the postoperative flexion range of the implant-fracture group were significantly greater than those in the no-implant-fracture group (p=0.039, 0.034, respectively). These results suggest the importance of patient education and careful rehabilitation to prevent excessive flexion. Overall, the AVANTA silicone implant showed a relatively high rate of implant fracture at our institute.

Surface replacing arthroplasty of a post-traumatic stiff and deviated proximal interphalangeal joint in an adolescent.

This case report describes the 4-year outcomes of proximal interphalangeal joint arthroplasty in a 14-year-old girl with a stiff joint after trauma. At follow-up, active range of motion was 35°, she was pain-free and satisfied with the outcome. Implant arthroplasty seems to be a valuable option for young patients with persistent post-traumatic stiff and deviated PIP joints to-at least temporarily-increase quality of life.

Complications of prosthesis versus trapeziectomy in trapeziometacarpal joint arthritis: A systematic review.

OBJECTIVE: Thumb osteoarthritis is a frequent pathology, mainly affecting the elderly. The surgical treatment initially described and having proved its worth is total trapeziectomy. Since the advent of trapeziometacarpal prostheses, several studies showed the non-inferiority of this technique on clinical criteria, with superiority in bone sparing, although neither technique demonstrated overall superiority. We therefore examined the specific complications of each surgical technique by analyzing their nature and prevalence through a review of the literature to compare them on these new parameters. METHODS: Seventy-four of the 320 articles reviewed were included, 38 of which concerned trapeziectomy, and 36 concerned prostheses, for a total of 4,865 patients. They were original studies, involving adults undergoing trapeziometacarpal arthroplasty or trapeziectomy, published after 2015, reporting at least one well-described complication. RESULTS: 6.13% of trapeziectomies presented severe complications (in particular thumb collapse and metacarpophalangeal hyperextension), 3.31% moderate complications and 1.90% minor complications, leading to a 2.0% revision rate. 23.88% of prostheses had severe complications (loosening, dislocation and wear), 5.06% moderate complications and 1.36% minor complications, leading to a 12.8% revision rate. In addition, we analyzed more recent prosthesis designs separately, and found lower prevalence of severe complications (16.56%) and revision surgery (4.3%). CONCLUSION: Revision surgery for trapeziometacarpal prostheses is usually only a standard trapeziectomy with the same follow-up as first-line trapeziectomy, whereas revision surgery for trapeziectomies is much more complex and the results are uncertain. For this reason, we would reserve total trapeziectomy for revision surgeries and patients with low functional demand for whom a second surgery is not desirable. Further studies could confirm this attitude, especially focusing on the latest generation of dual mobility implants.

Long-Term Implant Fracture Rates Following Silicone Metacarpophalangeal Joint Arthroplasty in Rheumatoid Arthritis.

PURPOSE: The primary objective of this study was to compare the long-term survival rates of silicone metacarpophalangeal (MCP) arthroplasties between two major implants in patients with rheumatoid arthritis, using implant fracture as an end point. We also evaluated the difference in postoperative function between patients with fractured and intact implants as a secondary objective. METHODS: A retrospective cohort study was conducted on 372 fingers of 133 hands that underwent silicone MCP arthroplasty between January 2000 and June 2019 (mean follow-up, 7.6 years). The survival rates of Swanson-type and Sutter-type implants were compared, using implant fracture as the end point after a radiographic evaluation. Clinical measures and upper limb functional assessments using the Disabilities of the Arm, Shoulder, and Hand (DASH) score were performed in the nested cohort. RESULTS: The 10.6-year survival rates for implant fracture of Swanson- and Sutter-type implants were 86.2% and 9.4%, respectively, with significantly higher survival noted for Swanson-type implants. The Sutter-type implant showed increased susceptibility to fracture in all four fingers compared to the Swanson-type implant. Implant fractures were primarily observed at the stem-hinge junction. There were no significant differences in upper limb function between the fractured and intact implant groups. CONCLUSIONS: Sutter-type implants were found to be more prone to fracture compared with Swanson-type implants. However, implant fractures did not significantly affect upper limb function. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognosis IV.

Complications after total wrist arthroplasty.

We reviewed the incidence and management of complications after total wrist arthroplasty, as reported in the literature, with so-called fourth-generation implants and other recent designs. While early intraoperative and postoperative complications, including fractures, tendon lacerations, infection, nerve compression, tendonitis, stiffness and chronic regional pain syndrome, had an acceptable incidence, late complications, such as periprosthetic osteolysis and implant loosening, occurred more frequently. Implant survival at 10 years was in the range of 70%-80% in most publications. Several of the implants have been modified or withdrawn. Instability and dislocation were frequent after a pyrocarbon spacer. Failed arthroplasties can be salvaged by revision arthroplasty or total wrist arthrodesis. Revision arthroplasty has a lower survival rate than primary arthroplasty and does not clearly offer important significant advantages over total wrist arthrodesis in terms of patient-reported outcome measures. Further development of prosthetic design, new materials and more knowledge on patient-related risk factors are needed.

Outcomes of Total Ankle Arthroplasty After Periprosthetic Cyst Curettage and Bone Grafting.

Total ankle arthroplasty (TAA) has become a popular management option for ankle arthritis. Periprosthetic osteolysis is one of the most common causes for reoperation in TAA. A CT scan should be done in all suspected osteolysis cases to confirm location, quantify size and aid in surgical planning. These patients are often asymptomatic with limited evidence regarding appropriate management. Smaller lesions should be monitored for progression in size. Periprosthetic cysts measuring 10-15mm in all three axes should be considered for debridment and curettage with autogenous bone grafting. The authors believe that bone grafting of large asymptomatic periprosthetic cysts could prevent implant failure.

Quality of Outcomes Research in Total Ankle Arthroplasty.

Total ankle arthroplasty is a topic that has recently gained increasing interest, largely due to the improved outcomes, which have been demonstrated by short- and mid-term research studies on the newer, third-generation implant designs. The purpose of this review is to provide an updated assessment of the quality of outcomes research on total ankle arthroplasty.

Outcomes of Lateral Transfibular Approach for Total Ankle Replacement.

Total ankle replacement through a lateral transfibular approach with trabecular metal implants was introduced in 2012 and originally was advertised as a safer approach in terms of wound healing issues. Further studies showed no significant difference comparing anterior and lateral approach for infections and would healing issues, whereas the main advantage is deformity correction, acting on coronal, sagittal, and rotational deformities and on fibular length issues. It showed a survival rate of 97.7% at 5 years follow-up.

Two-Year Outcomes After Total Ankle Replacement With a Novel Fixed-Bearing Implant By a Single Surgeon Non-Inventor.

Total ankle arthroplasty continues to gain popularity amongst surgeons and patients as an alternative to arthrodesis. Historically the designs of early implants were plagued with complications and frequently abandoned. Since that time the procedure and materials have undergone significant advancements in both surgical approach as well as design and function of the available implants. In this study, 40 consecutive patients who received a semiconstrained prosthesis with a unique fixed-bearing polyethylene insert were identified. Minimum follow-up was 2 y. Demographic, social, and past medical data was retrospectively reviewed. Concomitant procedures were also recorded. Radiographic analysis included lateral ankle radiograph postoperative range of motion (ROM) with maximum dorsiflexion and maximum plantarflexion weight bearing at the most recent clinic visit. Clinical outcomes included VAS, FFI, and AOFAS scores. Lateral radiographs taken in the office at a minimum 2-y follow-up showed mean maximum dorsiflexion of 11.8 degrees and plantarflexion of 13.9 degrees. VAS, FFI, and AOFAS scores improved from 8.1, 92.9, and 44.8 to 1.4, 15.3, and 90.1 postoperatively, respectively. A total of 2.5% (n = 1) required revision surgery for poly failure, and 5.0% (n = 2) underwent local wound care in the office setting postoperatively and healed without complications. Overall survivorship was 97.5% at the minimum follow-up of 2 y. In conclusion, similar studies have reported survivorship from 90% to 100% with modern ankle implants in short to mid-term follow-up. Although this is a small sample size, our data shows a 97.5% survivorship at 2 y postoperatively with favorable patient-reported statistically significant functional outcome scores, and ankle range of motion consistent with existing literature.

A multicenter, randomized controlled trial comparing a second-generation uncemented trabecular metal-backed vs. cemented polyethylene glenoid component in total shoulder arthroplasty: 5-year results.

BACKGROUND: Previously, we reported early (2-year) findings from a randomized controlled trial comparing a second-generation uncemented trabecular metal-backed (TM) glenoid vs. cemented polyethylene glenoid (POLY) in patients undergoing a total shoulder arthroplasty. The purpose of the current study is to report disease-specific quality of life, clinical, patient-reported, and radiographic outcomes at midterm (5-year) from this trial. METHODS: Five surgeons from 3 centers participated. Patients 18-79 years with a primary diagnosis of glenohumeral osteoarthritis were screened for eligibility. Randomization to an uncemented TM or cemented POLY glenoid was performed intra-operatively after adequate bone stock was confirmed. Study intervals were baseline, 2- and 5-year postoperative. The primary outcome was the Western Ontario Osteoarthritis Shoulder (WOOS) quality of life score. Secondary outcomes included the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, EuroQol-5 Dimensions, and 12-Item Short Form Health Survey scores and clinical and radiographic examinations. Radiographic images were reviewed for metal debris according to Endrizzi. Mixed effects repeated measures analysis of variance for within- and between-group comparisons were performed. RESULTS: Of the 104 patients who consented, 93 were randomized (46 TM; 47 POLY). There were no differences between groups at baseline (TM: mean age 66.5 years [standard deviation (SD) 6.4], 24 male and 22 female; and POLY: mean age 68.4 years [SD 5.5], 23 male / 24 female). Mean (SD) WOOS scores at baseline and 2 and 5 years were as follows: TM, 32 (21), 92 (13), and 93 (11); POLY, 27 (15), 93 (11), and 93 (10), respectively. No statistical or clinically relevant differences were noted with patient-reported outcomes between groups. Metal debris was observed in 11 (23.9%) patients, but outcomes were not negatively impacted, and debris severity was minor (grades 1 and 2). Complication rates were similar between groups (TM: 7 of 46 [15.2%], and POLY: 8 of 47 [17.0%]; P = .813). No aseptic glenoid failures were reported, but 1 patient in the TM group required revision because of infection. CONCLUSIONS: Our short-term (2-year) findings were maintained with longer follow-up. At 5 years postoperation, there were no statistically or clinically significant differences between an uncemented second-generation TM glenoid and a cemented polyethylene glenoid with respect to disease-specific quality of life or patient-reported outcomes. No glenoid implant failures were reported, and complication rates were similar between groups. Only one complication was glenoid related (1 infection in the TM group). Metal debris was observed in 23.9% of patients with a TM glenoid but did not negatively influence implant survival, patient-reported outcomes, or shoulder function.