Loosening and revision rates after total shoulder arthroplasty: a systematic review of cemented all-polyethylene glenoid and three modern designs of metal-backed glenoid.

BACKGROUND: Several modern designs of metal-backed glenoids (MBG) have been devised to overcome flaws such as loosening and a high failure rate. This review aimed to compare rates of complications and revision surgeries between cemented polyethylene glenoid (PEG) and three examples of modern MBG designs. METHODS: Literature search was carried out using PubMed, Cochrane Library, EMBASE, and Google Scholar using MeSH terms and natural keywords. A total of 1186 articles were screened. We descriptively analyzed numerical data between the groups and statistically analyzed the categorical data, such as the presence of radiolucent line, loosening, and revision surgery (failure). Articles were divided into three groups based on follow-up duration: < 36-month, 36-72-month, and > 72-month subgroups. RESULTS: This study included 35 articles (3769 shoulders); 25 on cemented PEG and ten on the modern MBG. Mean age was 66.4 (21-93) and 66.5 years (31-88). The mean duration of follow-up was 73.1 (12-211) and 56.1 months (24-100). Overall, the rate of the radiolucent line was 354/1302 (27%) and 47/282 (17%), the loosening rate was 465/3185 (15%) and 22/449 (5%), and the failure rate was 189/3316 (6%) and 11/457 (2%), for PEG and MBG, respectively. The results of < 36-month and 36-72-month subgroups showed lower rates of radiolucency and loosening in the cemented PEG group, but there was no significant difference in failure rate (P = 0.754 and 0.829, respectively). In the > 72-month subgroup, MBG was better in terms of loosening (P < 0.001) and failure rates (P = 0.006). CONCLUSIONS: The modern MBG component, especially TM glenoid, seems to be a promising alternative to cemented PEGs, based on subgroup revision rates according to the follow-up duration and overall results of ROM and clinical scores. All polyethylene glenoids tend to increase loosening and failure over time. Three modern MBG designs seem to have no difference in failure, at least in the < 36-month and 36-72-month subgroups compared to the cemented PEG. More long-term follow-up studies on modern MBG should be ultimately conducted. LEVEL OF EVIDENCE: Level IV, systematic review.

Novel implant design of the proximal interphalangeal joint using an optimized rolling contact joint mechanism.

BACKGROUND: The aims of this study were to propose a novel implant design for the proximal interphalangeal joint (PIPJ) of the hand using a rolling contact joint (RCJ) mechanism and to derive an optimal implant design based on human PIPJ kinematics. METHODS: In total, 10 participants with normal PIPJs were enrolled in this study. True lateral finger radiographs were obtained in 10° increments from 0º (full extension) to 120° flexion of PIPJ. Radiographs were used to determine the average center of rotation, which formed the basis of a mathematical expression of the PIPJ kinematics. The variations in extensor tendon excursions in relation to the range of motion of PIPJ were determined using results from previous cadaveric studies. As the next step, a PIPJ implant design using an RCJ mechanism that was most consistent with the mathematically expressed PIPJ kinematics and tendon excursions was determined using a constrained optimization algorithm. RESULTS: The final proposed PIPJ implant had a relatively constant center of rotation over the entire PIPJ range of motion among the participants. In addition, the extensor tendon excursions of the proposed implant as applied to the phalangeal bones were similar to those of the human tendon. The proposed PIPJ implant achieved an acceptable position of the RCJ surface on the proximal and middle phalanges, which was derived from the constrained optimization algorithm. CONCLUSIONS: A novel PIPJ implant design using an RCJ mechanism demonstrated acceptable outcomes in terms of PIPJ human kinematics and tendon excursions.

Current Practice Patterns of Fellowship-Trained Arthroplasty Surgeons: Has the Influence of Fellowship Training Been Undervalued?

BACKGROUND: As the clinical and financial environments of total joint arthroplasty (TJA) have evolved over the last several decades so has the role of the surgeon in providing this care to patients. Our objective was to examine current practices and influential factors among fellowship-trained arthroplasty surgeons. METHODS: An electronic survey was sent to all surgeons who had completed one of the three high-volume adult reconstruction fellowships from the years 2007-2016. The survey consisted of 34 questions regarding current practice characteristics, case volumes for primary and revision total hip arthroplasty (THA) and total knee arthroplasty (TKA), use of advanced technologies, choice of surgical approach and implant design, factors influencing their choices, and their involvement in implant selection and contract negotiations. RESULTS: Questionnaires were sent to 53 surgeons; 52 were completed. Sixty percent of respondents performed at least 100 TKAs and 84% performed at least 50 THAs annually. Ninety-four percent use a single company's implant for more than 90% of primary TKA and THA. Fellowship or residency experience was the most significant influence on TKA and THA implant selection for 62% and 45% of surgeons, respectively, while contracts of their current institution were the primary influence for 17% and 12%, respectively. Fifty-five percent of surgeons used some advanced technology of which 16% said this influenced their implant choice. Eighty-six percent perform the majority of cases at centers performing at least 200 TJAs per year, and 39% participate in implant contract negotiations. CONCLUSION: Despite changes in the economic environment of TJA, this study demonstrates that experience with a specific implant during training, particularly fellowship, is the most influential factor for implant selection among fellowship-trained arthroplasty surgeons.

[Research progress of artificial wrist joint prosthesis].

Objective: To summarize the research progress of the artificial wrist joint prosthesis. Methods: Domestic and abroad literature concerning artificial wrist joint prosthesis was reviewed and analyzed thoroughly. Results: Artificial wrist joint prosthesis has been developed to the 4th generation. The artificial wrist joint arthroplasty has advantages of pain relief and functional improvement and can achieve ideal short-term effectiveness. But there are some problems, such as loosening, subsidence, fracture, and dislocation of prosthesis. The long-term effectiveness of the 3rd and 4th generation prosthesis still need to be followed up. Conclusion: The biomechanics of wrist joint is extremely complicated, which results in less application and slow development of artificial wrist joint prosthesis. Early-term effectiveness of artificial wrist joint arthroplasty is basically satisfactory, but there are still some long-term complications. So the artificial wrist joint prosthesis remains to be developed.

The Emerging Role of 3D Printing in Arthroplasty and Orthopedics.

This article reviews the emerging role of 3D printing in arthroplasty and orthopedics, a topic of growing relevancy. It discusses the evolution of the technology, the value offered by the technology, current trends and factors impacting adoption in orthopedics, and areas of current and potential future use in arthroplasty and orthopedics.

[Transcutaneous osseointegrated prosthesis (TOP) after limb amputation : Status quo and perspectives]. / Transkutane osseointegrierte Prothesensysteme (TOPS) nach Extremitätenamputation : Status quo und Ausblick.

The majority of transfemoral and transtibial amputees can be functionally fitted with conventional suspension sockets; however, due to socket problems using conventional stump care, 60% of the patients have limited function and even in younger patients approximately one sixth are unable to wear the prosthesis daily. After the introduction of transcutaneous osseointegrated prostheses (TOP) the inherent problems of socket-stump care can be avoided for these patients. Against this background this article reviews the recent clinical development of TOP in Sweden, Germany, the Netherlands, Australia and USA currently in nine centers. Unanimously, all groups show that TOP enables physiological weight bearing, improved range of motion in the proximal joint, as well as osseoperceptive sensory feedback and better control of the artificial limb. Likewise, there is agreement that as a rule that there is a clinically less relevant superficial contamination of the stoma. Furthermore, TOP is nowadays also used for transhumeral amputees and after thumb amputation and the development of the indications for this technique are increasing. Future aspects include novel treatment options using implanted intramedullary electrodes allowing permanent and unlimited bidirectional communication with the human body (osseointegrated human-machine gateway). This could possibly realize an innovative form of prosthesis control as well as the combination of TOP and targeted muscle reinnervation (TMR) surgery to create more advanced prosthesis systems for upper and lower extremity amputees.

Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective.

As a new generation of medical metallic material, magnesium (Mg) and its alloys with or without surface coating have attracted a great deal of attention due to its biodegradability and potential for avoiding a removal operation after the implant has fulfilled its function for surgical fixation of injured musculoskeletal tissues. Although a few clinical cases on Mg-based orthopaedic implants were reported more than a century ago, it was not until recently that clinical trials using these implants with improved physicochemical properties were carried out in Germany, China and Korea for bone fracture fixation. The promising results so far suggest a bright future for biodegradable Mg-based orthopaedic implants and would warrant large scale phase II/III studies. Given the increasing interest on this emerging biomaterials and intense effort to improve its properties for various clinical applications, this review covers the evolution, current strategies, and future perspectives in the development of Mg-based orthopaedic implants. We also highlight a few clinical cases performed in China that may be unfamiliar to the general orthopaedic community.

[Endoprostheses in the elderly : Biomaterials, implant selection and fixation technique]. / Endoprothetik des älteren Menschen : Biomaterialien, Implantatwahl, Verankerungstechnik.

The replacement of hip and knee joints is one of the greatest success stories in orthopedics. Due to continuous improvement of biomaterials and implant design, patient-associated problems are now mostly multifactorial and only rarely caused by the implant. Abrasion was significantly reduced by the introduction of highly cross-linked polyethylene (PE), antioxidant stabilized PE, new ceramics and the development of ceramic and protective surfaces. It is assumed that further reduction of frictional resistance will not lead to a significantly better clinical result: however, the problem of periprosthetic infections and implant-related incompatibility is still unsolved and remains challenging for biomaterial research. For the knee joint PE will be irreplaceable for joint articulation even in the future due to the contact situation. Mobile bearings and fixed bearings are two established successful philosophies, which have shown comparably good clinical results. For the hip joint, it is forecasted that ceramic-on-ceramic will be the system of the future if the correct positioning and mounting of the components can be solved so that the problems, such as development of noise and breakage can be reduced to a minimum. An in-depth understanding and detailed knowledge of the biomaterials by the surgeon can prevent implant-related problems. For elderly patients it is assumed that the economic burden on the public healthcare system will have the strongest impact on implant selection.

Seven-Year Outcomes of the Silicone Arthroplasty in Rheumatoid Arthritis Prospective Cohort Study.

OBJECTIVE: Rheumatoid arthritis (RA) causes destruction of the metacarpophalangeal (MCP) joints, leading to hand deformities, pain, and loss of function. This study prospectively assessed long-term functional and health-related quality-of-life outcomes in RA patients with severe deformity at the MCP joints. METHODS: RA patients between ages 18 to 80 years with severe deformity at the MCP joints were referred to 1 of the 3 study sites. Subjects who elected to undergo silicone metacarpophalangeal joint arthroplasty (SMPA) while continuing with medical management were followed in the SMPA cohort. Subjects who elected to continue with medical management alone without surgery were followed in the non-SMPA cohort. Objective measurements included grip and pinch strength as well as arc of motion, ulnar drift, and extensor lag of the MCP joints. Patient-reported outcomes included the Michigan Hand Questionnaire (MHQ) and the Arthritis Impact Measurement Scales questionnaire. Radiographs of SMPA implants were assessed and graded as intact, deformed, or fractured. RESULTS: MHQ scores showed large improvements post-SMPA, and baseline-adjusted expected outcomes in the SMPA group were significantly better at year 7 in function, aesthetics, satisfaction, and overall score compared to non-SMPA. SMPA subjects did not improve in grip or pinch strength, but achieved significant improvement and maintained the improvement long term in ulnar drift and extensor lag. CONCLUSION: Benefits of the SMPA procedure are maintained over 7 years with low rates of implant fracture or deformity. Non-SMPA patients remained stable in their hand function over the 7-year study duration.

15 años de cirugía cardiaca infantil miniinvasiva; evolución y tendencias / 15 years of minimally invasive paediatric cardiac surgery; development and trends

INTRODUCCIÓN: Los abordajes miniinvasivos en cirugía cardiaca infantil no son habituales. Pocos grupos presentan programas y experiencia, quedando limitados a cardiopatías simples. Presentamos una casuística recopilada a lo largo de 15 años y más de 200 pacientes. MATERIAL Y MÉTODOS: En el año 2000 comenzamos un programa de acceso submamario, ampliándolo progresivamente a casos complejos y edades menores. En 2009 incorporamos el abordaje axilar, con idénticas pautas. En 2013 iniciamos la cirugía por miniesternotomía inferior, ampliando la cartera de servicios. Entre julio del 2000 y diciembre del 2014 se intervino a 203 pacientes: 102 por vía submamaria, 50 por axilar, 44 por miniesternotomía inferior, 4 por toracotomía lateral-posterior y 3 por miniesternotomía superior. RESULTADOS: Por patologías, la más frecuente fue la comunicación interauricular ostium secundum (128), seguida del seno venoso (20), comunicación interventricular (20), ostium primum (16) y otras (19). Un caso fue reconvertido a esternotomía. No hubo eventos neurológicos. Las medias de edad fueron 7,8/3,7 y 1,8 años, con medias de peso de 28,1/16,1 y 9,4 kg en los accesos submamario, axilar y miniesternotomía, respectivamente. Los resultados estéticos han sido excelentes. CONCLUSIONES: Tras 15 años de experiencia acumulada, la cirugía miniinvasiva es segura y eficaz, con resultados estéticos excelentes. La introducción gradual de diferentes accesos alternativos permite establecer pautas de aprendizaje. La versatilidad de accesos (submamario, axilar, miniesternotomía) facilita la selección de abordajes en función de cardiopatía y edad/peso

INTRODUCTION: The minimally invasive approach is seldom reported in paediatric cardiac surgery. Teams gathering experience are scarce, with programs focused on simple cases. The experience is presented on a series of over 200 cases operated on in the past 15 years. MATERIAL AND METHODS: A sub-mammary approach program was started in 2000, which was gradually extended to include more complex and younger patients. The axillary incision was adopted in 2009, following the same steps. In 2013, the mini-sternotomy incision was introduced, increasing our armamentarium. From July 2000 until December 2014, 203 patients were operated on. The sub-mammary approach was used in 102 cases, axillary in 50 patients, mini-sternotomy in 44, postero-lateral thoracotomy in 4 cases, and upper mini-sternotomy in 3. RESULTS: By diagnosis, ostium secundum atrial septal defect was the most common (128), followed by sinus venosus (20), ventricular septal defect (20), ostium primum (16), and others (19). One patient was converted to sternotomy. No neurological events were detected. The mean age was 7.8/3.7 and 1.8 years, and the mean weight was 28.1/16.1 and 9.4 Kg. in the sub-mammary, axillary and mini-sternotomy approaches, respectively. The aesthetic results were excellent. CONCLUSIONS: Based on our 15 years of experience, minimally invasive surgery is safe and yields excellent cosmetic results. The gradual introduction of alternative approaches (sub-mammary, axillary, mini-sternotomy) allowed us to set-up guidelines and learning curves. The wide range of incisions enables the most appropriate one to be selected depending on age/weight and cardiac condition

Staphylococcus epidermidis resistente a linezolid en paciente con prótesis articular / Linezolid-resistant Staphylococcus epidermidis in a patient with prosthetic joint

No disponible

[Knee and ankle arthroplasty ­ What results can be expected?]. / Knie- und Sprunggelenksprothese - Was darf der Patient erwarten?

Osteoarthrits is listed number one reason for adult disability. Therefore treatment of arthritis has maximum impact for the general practitioner. Disability of knee and ankle osteoarthritis causes inability to work and loss of independence. Patients will ask their physicians about expectations after total knee or ankle arthroplasty when other treatment has failed. The satisfaction rate after knee prosthesis is 75 ­ 89 % and for total ankle arthroplasty even slightly higher at 79 ­ 97 %. This is surprising because the survival in joint registry data after knee arthroplasty is 94 % compared to ankle arthroplasty significantly less at 69 % after 10 years, when a component revision is used as endpoint. In addition, knee component revision usually means exchanging to knee revision prosthesis while at the ankle it is usually prosthetic removal and conversion to ankle fusion. This difference of satisfaction is probably caused by the fact that knee arthroplasty is a standard operation and patients have very high expectations. Key to this is realistic patient education before surgery by general practitioners and specialists about the typical postoperative course with significant pain reduction not within days but rather in the first 2 postoperative years with moderate activity allowed. Candidates for total ankle replacement must be carefully selected because the prosthesis relies on a good bone stock, stable ligaments and proper limb alignment. Unlike for the knee, none of these can currently be corrected by the ankle prosthesis itself. Patients can expect significant pain reduction, better function and a slight improved range of motion after knee and ankle prosthesis. Sports activities are possible, but should be in a low-impact area. Heavy physical work or running and jumping activities are usually not possible and surely not recommended due to increased wear.

A clinical perspective on musculoskeletal infection treatment strategies and challenges.

Orthopaedic implants improve the quality of life of patients, but the risk of postoperative surgical site infection poses formidable challenges for clinicians. Future directions need to focus on prevention and treatment of infections associated with common arthroplasty procedures, such as the hip, knee, and shoulder, and nonarthroplasty procedures, including trauma, foot and ankle, and spine. Novel prevention methods, such as nanotechnology and the introduction of antibiotic-coated implants, may aid in the prevention and early treatment of periprosthetic joint infections with goals of improved eradication rates and maintaining patient mobility and satisfaction.

Tissue engineering of the temporomandibular joint disc: current status and future trends.

INTRODUCTION: Temporomandibular joint disorders are extremely prevalent and there is no ideal treatment clinically for the moment. For severe cases, a discectomy often need to be performed, which will further result in the development of osteoarthritis. In the past thirty years, tissue engineering has provided a promising approach for the effective remedy of severe TMJ disease through the creation of viable, effective, and biological functional implants. METHODS: Although TMJ disc tissue engineering is still in early stage, unremitting efforts and some achievements have been made over the past decades. In this review, a comprehensive summary of the available literature on the progress and status in tissue engineering of the TMJ disc regarding cell sources, scaffolds, biochemical and biomechanical stimuli, and other prospects relative to this field is provided. RESULTS AND CONCLUSIONS: Even though research studies in this field are too few compared to other fibrocartilage (e.g., knee meniscus) and numerous, difficult tasks still exist, we believe that our ultimate goal of regenerating a biological implant whose histological, biochemical, and biomechanical properties parallel native TMJ discs for clinical therapy will be achieved in the near future.

Total ankle replacement--evolution of the technology and future applications.

Total ankle arthroplasty was developed to reduce pain and retain motion of the ankle joint in patients with osteoarthritis much like its total hip and knee counterparts. Orthopaedic surgeons are well equipped to evaluate and treat patients with end-stage hip or knee arthritis; however, the management of patients with ankle arthritis represents a challenge to both general orthopaedic surgeons and to the foot and ankle surgeons to whom these patients are often referred. Although techniques for both hip and knee arthroplasty have evolved to provide long-term pain relief and functional improvement, neither ankle arthrodesis nor arthroplasty has demonstrated comparably favorable outcomes in long-term follow-up studies. Early ankle arthroplasty designs with highly constrained cemented components were abandoned due to unacceptably high failure rates and complications. While arthrodesis is still considered the "gold standard" for treatment of end-stage ankle arthritis, progression of adjacent joint arthrosis and diminished gait efficiency has led to a resurgence of interest in ankle arthroplasty. Long-term outcome studies for total ankle replacement found excellent or good results in 82% of patients who received a newer generation ankle device compared with 72% if undergoing ankle fusion. Continued long-term follow-up studies are necessary, but total ankle arthroplasty has become a viable option for surgical treatment of ankle arthritis.