Respirable dust and crystalline silica concentrations among workers at a brick kiln in Bhaktapur, Nepal.

Exposure to respirable dust and crystalline silica (SiO2) has been linked to chronic obstructive pulmonary disease, silicosis, cancer, heart disease, and other respiratory diseases. Relatively few studies have measured respirable dust and SiO2 concentrations among workers at brick kilns in low- and middle-income countries. The purpose of this study was to measure personal breathing zone (PBZ) respirable dust and SiO2 concentrations among workers at one brick kiln in Bhaktapur, Nepal. A cross-sectional study was conducted among 49 workers in five job categories: administration, fire master, green (unfired) brick hand molder, green brick machine molder, and top loader. PBZ air samples were collected from each worker following Methods 0600 (respirable dust) and 7500 (respirable crystalline SiO2: cristobalite, quartz, tridymite) of the U.S. National Institute for Occupational Safety and Health. Eight-hour time-weighted average (TWA) respirable dust and quartz concentrations were also calculated. SiO2 percentage was measured in one bulk sample each of wet clay, the release agent used by green brick hand molders, and top coat soil at the brick kiln. The geometric mean (GM) sample and TWA respirable dust concentrations were 0.20 (95% confidence interval [CI]: 0.16, 0.27) and 0.12 (95% CI: 0.09, 0.16) mg/m3, respectively. GM sample and TWA quartz concentrations were 15.28 (95% CI: 11.11, 21.02) and 8.60 (95% CI: 5.99, 12.34) µg/m3, respectively. Job category was significantly associated with GM sample and TWA respirable dust and quartz concentrations (all p < 0.0001). Top loaders had the highest GM sample and TWA respirable dust concentrations of 1.49 and 0.99 mg/m3, respectively. Top loaders also had the highest GM sample and TWA quartz concentrations of 173.08 and 114.39 µg/m3, respectively. Quartz percentages in bulk samples were 16%-27%. Interventions including using wet methods to reduce dust generation, administrative controls, personal protective equipment, and education and training should be implemented to reduce brick kiln worker exposures to respirable dust and SiO2.

Silicosis Among Immigrant Engineered Stone (Quartz) Countertop Fabrication Workers in California.

Importance: Silicosis associated with inhalation of respirable crystalline silica among engineered stone countertop fabrication workers is an emerging health concern. Objective: To describe clinical, socioeconomic, and occupational characteristics of patients diagnosed with silicosis associated with engineered stone in California. Design, Setting, and Participants: This case series included reported cases of silicosis associated with fabrication of engineered stone countertops, as identified by statewide surveillance by the California Department of Public Health (2019-2022). Data analysis was performed from October 2022 to March 2023. Exposures: Patient interviews and medical record abstractions were used to assess occupational exposure to respirable crystalline silica, including duration of work tenure and preventive measures undertaken. Main Outcomes and Measures: Demographics, clinical characteristics, health care utilization, and clinical outcomes were obtained, including vital status, hypoxia, and lung transplant. Results: This case series identified 52 male patients meeting inclusion criteria; median (IQR) age was 45 (40-49) years, and 51 were Latino immigrants. Ten (19%) were uninsured, and 20 (39%) had restricted-scope Medi-Cal; 25 (48%) presented initially to an emergency department. A delay in diagnosis occurred in 30 (58%) patients, most commonly due to alternative initial diagnoses of bacterial pneumonia (9 [30%]) or tuberculosis (8 [27%]). At diagnosis, 20 (38%) patients had advanced disease (progressive massive fibrosis) with severely or very severely reduced forced expiratory volume in 1 second in 8 (18%) and 5 (11%), respectively. Of the cases, 10 (19%) were fatal; median (IQR) age at death was 46 (38-51) years, and 6 patients (12%) were alive with chronic resting hypoxia. Eleven were referred for lung transplant: 3 underwent transplant with 1 fatality; 7 were declined transplant, with 6 fatalities; and 1 died prior to listing. Median (IQR) work tenure was 15 (10-20) years; 23 (45%) reported use of water suppression for dust mitigation, and 25 (48%) continued to fabricate stone after being diagnosed with silicosis. Conclusions and Relevance: In this case series performed in California, silicosis associated with occupational exposure to dust from engineered stone primarily occurred among young Latino immigrant men. Many patients presented with severe disease, and some cases were fatal.

Characterization of lignite deposits of Barmer Basin, Rajasthan: insights from mineralogical and elemental analysis.

The geochemistry of fly ash produced from the combustion of coal at thermal power plants presents a significant challenge for disposal and environmental impact due to its complex mineralogical and elemental composition. The objective of this study was to investigate the mineralogical and elemental distribution of thirty lignite samples from the Barmer Basin using advanced techniques such as X-ray diffraction (XRD), X-ray fluorescence spectrometry (XRF) and inductively coupled plasma mass spectrometry (ICP-MS). XRD analysis revealed the presence of minerals such as haematite (Fe2O3), nepheline, anhydrite, magnesite, andalusite, spinel and anatase. Other minor minerals included albite, siderite, periclase, calcite, mayenite, hauyne, pyrite, cristobalite, quartz, nosean and kaolinite. XRF analysis demonstrated that the most abundant elements in the Barmer Basin lignite ash were iron oxide (Fe2O3), sulphur oxide (SO3), calcium oxide (CaO), and quartz (SiO2) followed by minor traces of toxic oxides (SrO, V2O5, NiO, Cr2O3, Co2O3, CuO) that are known to have adverse effects on human health and the environment. The rare earth element (REE) composition showed higher concentrations of Tb, Dy, Ho, Er, Tm, Yb, Lu, Y and Sc at the Giral and lower concentrations at Sonari mine. The Barmer lignites recorded higher concentration of trace elements such as V, Cr, Co, Ni, Cu and Sr while lower concentration of Rb, Cs, Ba, Pb, As, Th and U were observed within optimal range. The study findings revealed the predominant mineral concentration, elemental makeup, trace elements and rare earth elements associated with lignite reserves in the Barmer Basin.

Managing Quartz Exposure in Apartment Building and Infrastructure Construction Work Tasks.

The present report describes exposure to respirable silica and dust in the construction industry, as well as means to manage them. The average exposure in studied work tasks (n = 148) amounted to 64% of the Finnish OEL value of 0.05 mg/m3. While 10% of exposure estimates exceeded the OEL, the 60% percentile was well below 10% of the OEL, as was the median exposure. In other words, exposure was low in more than half of the tasks. Work tasks where exposure was low included construction cleaning, work management, installation of concrete elements, rebar laying, driving work machines equipped with cabin air intake filtration, and landscaping, in addition to some road construction tasks. Excessive exposure (>OEL) was related to not using respiratory protection at all or not using it for long enough after the dusty activity ceased. Excessive exposures were found in sandblasting, dismantling facade elements, diamond drilling, drilling hollow-core slabs, drilling with a drilling rig, priming of explosives, tiling, use of cabinless earthmoving machines, and jackhammering, regardless of whether the hammering took place in an underpressurized compartment or not. Even in these tasks, it was possible to perform the work safely, following good dust prevention measures and, when necessary, using respiratory protection suitable for the job. Furthermore, in all tasks with generally low exposure, one could be significantly exposed through the general air or by making poor choices in terms of dust control.

Occupational quartz and particle exposure affect systemic levels of inflammatory markers related to inflammasome activation and cardiovascular disease.

BACKGROUND: The inflammatory responses are central components of diseases associated with particulate matter (PM) exposure, including systemic diseases such as cardiovascular diseases (CVDs). The aim of this study was to determine if exposure to PM, including respirable dust or quartz in the iron foundry environment mediates systemic inflammatory responses, focusing on the NLRP3 inflammasome and novel or established inflammatory markers of CVDs. METHODS: The exposure to PM, including respirable dust, metals and quartz were determined in 40 foundry workers at two separate occasions per worker. In addition, blood samples were collected both pre-shift and post-shift and quantified for inflammatory markers. The respirable dust and quartz exposures were correlated to levels of inflammatory markers in blood using Pearson, Kendall τ and mixed model statistics. Analyzed inflammatory markers included: 1) general markers of inflammation, including interleukins, chemokines, acute phase proteins, and white blood cell counts, 2) novel or established inflammatory markers of CVD, such as growth/differentiation factor-15 (GDF-15), CD40 ligand, soluble suppressor of tumorigenesis 2 (sST2), intercellular/vascular adhesion molecule-1 (ICAM-1, VCAM-1), and myeloperoxidase (MPO), and 3) NLRP3 inflammasome-related markers, including interleukin (IL)-1ß, IL-18, IL-1 receptor antagonist (IL-1Ra), and caspase-1 activity. RESULTS: The average respirator adjusted exposure level to respirable dust and quartz for the 40 foundry workers included in the study was 0.65 and 0.020 mg/m3, respectively. Respirable quartz exposure correlated with several NLRP3 inflammasome-related markers, including plasma levels of IL-1ß and IL-18, and several caspase-1 activity measures in monocytes, demonstrating a reverse relationship. Respirable dust exposure mainly correlated with non-inflammasome related markers like CXCL8 and sST2. CONCLUSIONS: The finding that NLRP3 inflammasome-related markers correlated with PM and quartz exposure suggest that this potent inflammatory cellular mechanism indeed is affected even at current exposure levels in Swedish iron foundries. The results highlight concerns regarding the safety of current exposure limits to respirable dust and quartz, and encourage continuous efforts to reduce exposure in dust and quartz exposed industries.

Temporal Trends in Variability of Respirable Dust and Respirable Quartz Concentrations in the European Industrial Minerals Sector.

While between- and within-worker variability have been studied quite extensively, hardly any research is available that examines long-term trends in the variability of occupational exposure. In this first study on trends in occupational exposure variability temporal changes in the variability of respirable dust and respirable quartz concentrations within the European industrial minerals sector were demonstrated. Since 2000 the European Industrial Minerals Association's Dust Monitoring Program (IMA-DMP) has systematically collected respirable dust and respirable quartz measurements. The resulting IMA-DMP occupational exposure database contains at present approximately 40 000 personal full-shift measurements, collected at 177 sites owned by 39 companies, located in 23 European countries. Repeated measurements of workers performing their duties within a specific site-job-campaign combination allowed estimation of within- and between-worker variability in exposure concentrations. Overall day-to-day variability predominated the between-worker variability for both respirable dust concentrations and quartz concentrations. The within-worker variability in concentrations by job was two to three times higher for respirable quartz than for respirable dust. The median between-worker variability in respirable dust concentrations was low and further reduced over time. For quartz concentrations the same phenomenon albeit somewhat less strong was observed. In contrast, for the within-worker variability in concentrations downward and upward temporal trends were apparent for both respirable dust and respirable quartz. The study shows that the (relative) size of temporal variability is large and unpredictable and therefore regular measurement campaigns are needed to ascertain compliance to occupational exposure limit values.

Occupational exposure to respirable crystalline silica among US metal and nonmetal miners, 2000-2019.

BACKGROUND: In metal and nonmetal (M/NM) mines in the United States, respirable crystalline silica (RCS) exposures are a recognized health hazard and a leading indicator of respiratory disease. This study describes hazardous exposures that exceed occupational exposure limits and examines patterns of hazardous RCS exposure over time among M/NM miners to better inform the need for interventions. METHODS: Data for this study were obtained from the Mine Safety and Health Administration (MSHA) Open Government Initiative Portal for the years 2000-2019, examining respirable dust samples with MSHA-measured quartz concentration >1%. Descriptive statistics for RCS were analyzed for M/NM miners by year, mine type, sector, commodity, occupation, and location in a mine. RESULTS: This study found the overall geometric mean (GM) for personal exposures to RCS was 28.9 µg/m3 (geometric standard deviation: 2.5). Exposures varied significantly by year, mine type, sector, commodity, occupation, and location in a mine. Overall, the percentages of exposures above the MSHA permissible exposure limit (PEL for respirable dust with >1% quartz, approximately 100 µg/m3 RCS) and the National Institute for Occupational Safety and Health RCS recommended exposure limit (REL, 50 µg/m3 ) were 11.8% and 27.3%, respectively. GM exposures to RCS in 2018 (45.9 µg/m3 ) and 2019 (52.9 µg/m3 ) were significantly higher than the GM for all years prior. The overall 95th percentile of RCS exposures from 2000 to 2019 was 148.9 µg/m3 , suggesting a substantial risk of hazardous exposures above the PEL and REL during the entire period analyzed. CONCLUSIONS: The prevalence of high exposures to RCS among M/NM miners continues in the past 20 years and may be increasing in certain settings and occupations. Further research and intervention of the highest exposures are needed to minimize the risks of acquiring silica-induced respiratory diseases.

Characterization of the Emissions and Crystalline Silica Content of Airborne Dust Generated from Grinding Natural and Engineered Stones.

In this study, we systematically characterized the airborne dust generated from grinding engineered and natural stone products using a laboratory testing system designed and operated to collect representative respirable dust samples. Four stone samples tested included two engineered stones consisting of crystalline silica in a polyester resin matrix (formulations differed with Stones A having up to 90wt% crystalline silica and Stone B up to 50wt% crystalline silica), an engineered stone consisting of recycled glass in a cement matrix (Stone C), and a granite. Aerosol samples were collected by respirable dust samplers, total dust samplers, and a Micro-Orifice Uniform Deposit Impactor. Aerosol samples were analyzed by gravimetric analysis and x-ray diffraction to determine dust generation rates, crystalline silica generation rates, and crystalline silica content. Additionally, bulk dust settled on the floor of the testing system was analyzed for crystalline silica content. Real-time particle size distributions were measured using an Aerodynamic Particle Sizer. All stone types generated similar trimodal lognormal number-weighted particle size distributions during grinding with the most prominent mode at an aerodynamic diameter of about 2.0-2.3 µm, suggesting dust formation from grinding different stones is similar. Bulk dust from Stone C contained no crystalline silica. Bulk dust from Stone A, Stone B, and granite contained 60, 23, and 30wt% crystalline silica, respectively. In Stones A and B, the cristobalite form of crystalline silica was more plentiful than the quartz form. Only the quartz form was detected in granite. The bulk dust, respirable dust, and total dust for each stone had comparable amounts of crystalline silica, suggesting that crystalline silica content in the bulk dust could be representative of that in respirable dust generated during grinding. Granite generated more dust per unit volume of material removed than the engineered stones, which all had similar normalized dust generation rates. Stone A had the highest normalized generation rates of crystalline silica, followed by granite, Stone B, and Stone C (no crystalline silica), which likely leads to the same trend of respirable crystalline silica (RCS) exposure when working with these different stones. Manufacturing and adoption of engineered stone products with formulations such as Stone B or Stone C could potentially lower or eliminate RCS exposure risks. Combining all the effects of dust generation rate, size-dependent silica content, and respirable fraction, the highest normalized generation rate of RCS consistently occurs at 3.2-5.6 µm for all the stones containing crystalline silica. Therefore, removing particles in this size range near the generation sources should be prioritized when developing engineering control measures.

Benefits and limitations of field-based monitoring approaches for respirable dust and crystalline silica applied in a sandstone quarry.

With the advent of new sensing technologies and robust field-deployable analyzers, monitoring approaches can now generate valuable hazard information directly in the workplace. This is the case for monitoring respirable dust and respirable crystalline silica concentration levels. Estimating the quartz amount of a respirable dust sample by nondestructive analysis can be carried out using portable Fourier transform infrared spectroscopy (FTIR) units. Real-time respirable dust monitors, combined with small video cameras, allow advanced assessments using the Helmet-CAM methodology. These two field-based monitoring approaches, developed by the National Institute for Occupational Safety and Health (NIOSH), have been trialed in a sandstone quarry. Twenty-six Helmet-CAM sessions were conducted, and forty-one dust samples were collected around the quarry and analyzed on-site during two events. The generated data generated were used to characterize concentration levels for the monitored areas and workers, to identify good practices, and to illustrate activities that could be improved with additional engineered control technologies. Laboratory analysis of the collected samples complemented the field finding and provided an assessment of the performance of the field-based techniques. Only a fraction of the real-time respirable dust monitoring sessions data could be corrected with laboratory analysis. The average correction factor ratio was 5.0. Nevertheless, Helmet-CAM results provided valuable information for each session. The field-based quartz monitoring approach overestimated the concentration by a factor of 1.8, but it successfully assessed the quartz concentration trends in the quarry. The data collected could be used for the determination of a quarry calibration factor for future events. The quartz content in the dust was found to vary from 14% to 100%, and this indicates the need for multiple techniques in the characterization of respirable dust and quartz concentration and exposure. Overall, this study reports the importance of the adoption of field-based monitoring techniques when combined with a proper understanding and knowledge of the capabilities and limitations of each technique.

[Investigation of newly diagnosed pneumoconiosis from artificial quartz stone manufacturers].

Artificial quartz dust exposure may cause associated pneumoconiosis. From November 2019 to July 2020, a total of 27 cases of silicosis associated with artificial quartz stone manufacturers were diagnosed and treated in the Occupational disease Department of Suzhou Fifth People's Hospital. The average age of onset was (46.8±6.6) years, and the average working age of dust exposure was (5.7±1.7) years.The main feature of high KV chest radiography is P/S shadow with strip shadow. CT imaging findings showed diffuse small nodules and ground glass shadows with band shadows. The lesions were mainly distributed in the upper lung, accompanied by pleural thickening, lymphadenopathy and calcification. The pulmonary function impairment was mainly mild restrictive ventilation disorder, and the bronchial mucosa longitudinal plica was the main manifestation under tracheoscopy. The age of silicosis of workers in artificial quartz stone production enterprises is younger, the working age of dust exposure is short, the lung function and bronchial mucosa have a certain degree of damage, and effective preventive measures should be taken in time.

Mercury background values in soils and saprolites in the gold-rich greenstone belt of Suriname, Guiana Shield: The role of parent rock and residual enrichment.

In order to develop criteria to distinguish polluted from unpolluted materials in areas subjected to artisanal small-scale gold mining, background mercury values were established in 62 natural soil and saprolite profiles on 16 different parent rock types in the greenstone belt of Suriname. Hg values in pristine topsoils often amount to up to 200 µg/kg, about 100 times higher than Hg in common parent rocks. Additional analyses of 40 major and trace elements in two pilot profiles show that Hg values are strongly correlated to Fe, Cr and V values, which suggests that just as those elements Hg is residually enriched in topsoils by laterisation processes. In the deeper pallid zones of the profiles, Hg has often been leached almost completely together with iron by reducing groundwater action. In this way the range of Hg values within a single profile can be greater than between profiles. Maximum and average Hg values of 196 samples from the 16 different parent rock types fall apart into two main groups. Felsic parent rocks with predominance of quartz and feldspar have maximum Hg values around 100 µg/kg and averages around 50 µg/kg, mafic ones with less silica and higher Fe, Mg and Ca have maximum values around 250-300 µg/kg and averages around 150 µg/kg. In general the natural soil and saprolite Hg values are in the same order of magnitude as many published mine tailings and stream sediments, and therefore cannot be used to separate polluted from unpolluted materials.

Historical ferrous slag induces modern environmental problems in the Moravian Karst (Czech Republic).

Ferrous slag produced by a historic smelter is washed from a slagheap and transported by a creek through a cave system. Slag filling cave spaces, abrasion of cave walls / calcite speleothems, and contamination of the aquatic environment with heavy metals and other toxic components are concerns. We characterize the slag in its deposition site, map its transport through the cave system, characterize the effect of slag transport, and evaluate the risks to both cave and aqueous environments. The study was based on chemical and phase analysis supported laboratory experiments and geochemical modeling. The slag in the slagheap was dominated by amorphous glass phase (66 to 99 wt%) with mean composition of 49.8 ± 2.8 wt% SiO2, 29.9 ± 1.6 wt% CaO, 13.4 ± 1.2 wt% Al2O3, 2.7 ± 0.3 wt% K2O, and 1.2 ± 0.1 wt% MgO. Minerals such as melilite, plagioclase, anorthite, and wollastonite / pseudowollastonite with lower amounts of quartz, cristobalite, and calcite were detected. Slag enriches the cave environment with Se, As, W, Y, U, Be, Cs, Sc, Cd, Hf, Ba, Th, Cr, Zr, Zn, and V. However, only Zr, V, Co, and As exceed the specified limits for soils (US EPA and EU limits). The dissolution lifetime of a 1 mm3 volume of slag was estimated to be 27,000 years, whereas the mean residence time of the slag in the cave is much shorter, defined by a flood frequency of ca. 47 years. Consequently, the extent of slag weathering and contamination of cave environment by slag weathering products is small under given conditions. However, slag enriched in U and Th can increase radon production as a result of alpha decay. The slag has an abrasive effect on surrounding rocks and disintegrated slag can contaminate calcite speleothems.

Morphology and mineralogical composition of sandblasting dust particles from the Taklimakan Desert.

The physicochemical characteristics of dust particles from the Taklimakan Desert are the fundamental basis for the assessment of particle variation during their long-distance transport and the subsequent environmental effects. In this study, 43,222 individual sandblasting dust particles, which were mobilised using a chamber with surface soils of sand dunes and Gobi (the two types of surfaces constituting the desert) were analysed to statistically quantify the shape and mineralogical composition of dust particles from the desert. The mode of the number-size distribution of particles from the sand dunes was 0.5-0.7 µm and that of particles from Gobi soils was approximately 1.0 µm. In contrast, the distributions of particle number fractions versus shape factors such as aspect ratio and roundness were similar, despite the irregular shape of the particles. Clay mineral particles were most frequently composed of chlorite and kaolinite, accounting for 66.74 ± 12.08% of the particles from both types of soils. Quartz and feldspar particles accounted for 9.57 ± 4.52% and 2.84 ± 1.28%, respectively. The mineralogical composition of particles smaller than 1.0 µm, in both soil types, was dominated by chlorite (Al-Si-O-Mg), kaolinite (Ai-Si-O), and quartz (SiO). Gypsum (CaS) and halite (NaCl) were the major salt components in particles from both soil types. Gypsum-containing particles existed in a wide size range and occupied 3.42%-8.98% of the particles from Gobi soils and 0.27%-2.18% of the particles from sand dunes. Most gypsum-containing particles were mixed with Si-containing minerals in the form of silicate or aluminosilicate; the remaining gypsum-containing particles were gypsum crystals or mixtures of gypsum and Ca-containing minerals. These results provide a comprehensive statistical profile of dust particles released by the sandblasting process from the Taklimakan Desert to the atmosphere.

Application of a Fourier Transform Infrared (FTIR) Principal Component Regression (PCR) Chemometric Method for the Quantification of Respirable Crystalline Silica (Quartz), Kaolinite, and Coal in Coal Mine Dusts from Australia, UK, and South Africa.

This article describes the approach used to assess the performance of a Fourier transform infrared (FTIR) and principal component regression (PCR) chemometric method when measuring respirable quartz, kaolinite, and coal in samples from a variety of mines from different countries; relative to target assigned values determined using X-ray diffraction (XRD). For comparison, FTIR results using the partial least squares regression (PLSR) method are also available. Bulk dusts from 10 Australian mines were scanned using XRD and grouped into three sets based on the levels of quartz, kaolinite, and feldspar within their crystalline mineral composition. Prediction samples were generated from 5 of these Australian mine dusts, Durrans coal dust, 2 mine dusts from the UK, and a single South African mine dust (71 samples in total) by collecting the aerosolized respirable dust onto 25-mm diameter polyvinylchloride filters using the Safety in Mines Personal Dust Sampler (SIMPEDS) operating at 2.2 l min-1. The predicted values from the FTIR chemometric methods were compared with assigned target values determined using a direct on-aerosol filter XRD analysis method described in Method for the Determination of Hazardous Substances (MDHS) 101. Limits of detection (LOD) and uncertainty values for each analyte were calculated from a linear regression between target and predicted values. The uncertainty was determined using the calibration uncertainty equation for an unweighted regression. FTIR results from PCR and PLSR are very similar. For the PCR method, the LOD for quartz, kaolinite, and coal were 5, 25, and 71 µg, respectively. For quartz, an LOD of 5 µg corresponds to an airborne quartz concentration of 10 µg m-3, assuming a 4-h sampling time and collection flow rate of 2.2 l min-1. The FTIR measurement met the expected performance criteria outlined in ISO 20581 when sampling quartz for more than 4 h using a flow rate of 2.2 l min-1 at a concentration of 0.1 mg m-3 (100 µg m-3), the current workplace exposure limit in Great Britain. This method met the same performance criteria when measuring exposures at the Australian Workplace Exposure Standard (WES) concentration of 0.05 mg m-3, although in this case a sampling period greater than 8 h was needed.

Comparison of the Analysis of Respirable Crystalline Silica in Workplace Air by Direct-on-Filter Methods using X-ray Diffraction and Fourier Transform Infrared Spectroscopy.

A comparison of the analysis of respirable crystalline silica direct-on-filter methods using X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy was undertaken using 253 real workplace air samples from road construction and tunnelling, coal mining, and kitchen benchtop manufacturing in Australia. Using pure α-quartz standards, XRD and FT-IR direct-on-filter analyses produced identical test results, however, the real workplace samples showed a clear discrepancy between FT-IR and XRD results with on average a 9% positive bias of the FT-IR results. The cause of the positive bias was due to matrix interferences which was confirmed by using synthetic mixture air samples. Approximately a third of the data by direct-on-filter method using FT-IR was assessed to be invalid based on the peak height ratio criterion due to excessive interferences and weight overload limitations. The XRD method showed better results due to less interference from the common matrices. XRD could handle up to twice the sample loading and at higher loadings up to 7 mg when a correction was applied. It was also able to achieve a lower limit of detection of 2 µg filter-1 when a slower scan condition was utilized.

Aerosol Analysis Using Handheld Raman Spectrometer: On-site Quantification of Trace Crystalline Silica in Workplace Atmospheres.

A method for aerosol chemical analysis using handheld Raman spectrometer has been developed and its application to measurement of crystalline silica concentration in workplace atmosphere is described. The approach involves collecting aerosol as a spot sample using a wearable optical aerosol monitor, followed by direct-on-filter quantitative analysis of the spot sample for crystalline silica using handheld Raman spectrometer. The filter cassette of a commercially available optical aerosol monitor (designed to collect aerosol for post-shift analysis) was modified to collect 1.5-mm-diameter spot sample, which provided adequate detection limits for short-term measurements over a few tens of minutes or hours. The method was calibrated using aerosolized α-quartz standard reference material in the laboratory. Two Raman spectrometers were evaluated, one a handheld unit (weighing less than 410 g) and the other a larger probe-based field-portable unit (weighing about 5 kg). The lowest limit of quantification for α-quartz of 16.6 µg m-3 was obtained using the handheld Raman unit at a sample collection time of 1 h at 0.4 l min-1. Short-term measurement capability and sensitivity of the Raman method were demonstrated using a transient simulated workplace aerosol. Workplace air and personal breathing zone concentrations of crystalline silica of workers at a hydraulic fracturing worksite were measured using the Raman method. The measurements showed good agreement with the co-located samples analyzed using the standard X-ray powder diffraction (XRD) method, agreeing within 0.15-23.2% of each other. This magnitude of difference was comparable to the inter- and intra-laboratory analytical precision of established XRD and infrared methods. The pilot study shows that for silica-containing materials studied in this work it is possible to obtain quantitative measurements with good analytical figures of merit using handheld or portable Raman spectrometers. Further studies will be needed to assess matrix interferences and measurement uncertainty for several other types of particle matrices to assess the broader applicability of the method.

Multicomponent Measurement of Respirable Quartz, Kaolinite and Coal Dust using Fourier Transform Infrared Spectroscopy (FTIR): A Comparison Between Partial Least Squares and Principal Component Regressions.

Exposure to respirable crystalline silica (RCS) is potentially hazardous to the health of thousands of workers in Great Britain. Both X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy can be used to measure RCS to assess exposures. The current method outlined in the Health and Safety Executive's (HSE) Methods for the Determination of Hazardous Substances (MDHS) guidance series is 'MDHS 101 Crystalline silica in respirable airborne dust - Direct-on-filter analyses by infrared spectroscopy or x-ray'. This describes a procedure for the determination of time-weighted average concentrations of RCS either as quartz or cristobalite in airborne dust. FTIR is more commonly employed because it is less expensive, potentially portable and relatively easy to use. However, the FTIR analysis of RCS is affected by spectral interference from silicates. Chemometric techniques, known as Partial Least Squares Regression (PLSR) and Principal Component Regression (PCR), are two computational processes that have the capability to remove spectral interference from FTIR spectra and correlate spectral features with constituent concentrations. These two common chemometric processes were tested on artificial mixtures of quartz and kaolinite in coal dust using the same commercially available software package. Calibration, validation and prediction samples were prepared by collecting aerosols of these dusts onto polyvinylchloride (PVC) filters using a Safety in Mines Personal Dust Sampler (SIMPEDS) respirable cyclone. PCR and PLSR analyses were compared when processing the same spectra. Good correlations between the target values, measured using XRD, were obtained for both the PCR and PLSR models e.g. 0.98-0.99 (quartz), 0.98-0.98 (kaolinite) and 0.96-0.97 (coal). The level of agreement between PCR and PLSR was within the 95% confidence value for each analyte. Slight differences observed between predicted PCR and PLSR values were due to the number of optimal principal components applied to each chemometric process. The presence of kaolinite in these samples caused an 18% overestimation of quartz, for the FTIR, when following MDHS 101 without a chemometric method. Chemometric methods are a useful approach to obtain interference-free results for the measurement of RCS from some workplace environments and to provide a multicomponent analysis to better characterise exposures of workers.

Coal mine dust lung disease in miners killed in the Upper Big Branch disaster: a review of lung pathology and contemporary respirable dust levels in underground US coal mines.

OBJECTIVES: In 2010, 29 coal miners died due to an explosion at the Upper Big Branch (UBB) mine in West Virginia, USA. Autopsy examinations of 24 individuals with evaluable lung tissue identified 17 considered to have coal workers' pneumoconiosis (CWP). The objectives of this study were to characterise histopathological findings of lung tissue from a sample of UBB fatalities and better understand the respirable dust concentrations experienced by these miners at UBB relative to other US coal mines. METHODS: Occupational pulmonary pathologists evaluated lung tissue specimens from UBB fatalities for the presence of features of pneumoconiosis. Respirable dust and quartz samples submitted for regulatory compliance from all US underground coal mines prior to the disaster were analysed. RESULTS: Families of seven UBB fatalities provided consent for the study. Histopathologic evidence of CWP was found in all seven cases. For the USA, central Appalachia and UBB, compliance dust samples showed the geometric mean for respirable dust was 0.468, 0.420 and 0.518 mg/m3, respectively, and respirable quartz concentrations were 0.030, 0.038 and 0.061 mg/m3. After adjusting for quartz concentrations, UBB exceeded the US permissible exposure limit (PEL) for respirable dust in 28% of samples. CONCLUSIONS: Although higher than average respirable dust and quartz levels were observed at UBB, over 200 US underground coal mines had higher dust concentrations than UBB and over 100 exceeded the PEL more frequently. Together with lung histopathological findings among UBB fatalities, these data suggest exposures leading to CWP in the USA are more prevalent than previously understood.

Determinants of Respirable Quartz Exposure Concentrations Across Occupations in Denmark, 2018.

BACKGROUND: High concentrations of respirable quartz have been reported from workers in construction, foundries, and quarries. Current exposure concentrations in prevalent but presumably lower exposed occupations have been less examined. We aimed to quantify current exposure concentrations of respirable dust and quartz across prevalent occupations and to identify determinants of respirable quartz exposure across these occupations. METHODS: One hundred and eighty-nine full-shift personal samples of respirable dust of workers within 11 occupations in Denmark were sampled during 2018. Respirable dust was determined gravimetrically and analysed for quartz content with infrared spectrometry. Determinants for respirable quartz exposure, i.e. use of power tools, outdoor or indoor location, and percentage of quartz in respirable dust, were analysed in linear mixed effect models. RESULTS: The overall geometric means (geometric standard deviations) for respirable dust and quartz were 216 µg m-3 (4.42) and 16 µg m-3 (4.07), respectively. The highest quartz concentrations were observed among stone cutters and carvers [93 µg m-3 (3.47)], and metal melters and casters [61 µg m-3 (1.71)]. Use of power tools increased exposure concentrations of quartz by a factor of 3.5. Occupations explained 27%, companies within occupations 28%, and differences between workers within companies within occupations 14% of the variability in quartz concentrations. Thirty percent was due to day-to-day variability in exposure concentrations. In total, 19% of the variation in quartz concentration could be explained by type of tool, indoor/outdoor location, and percentage of quartz in respirable dust. CONCLUSION: Current exposure concentrations are generally low, but some occupations in this study had average exposure concentrations to respirable quartz above the ACGIH threshold limit value of 25 µg m-3. Preventive measures to lower excess risk of quartz-related diseases among these workers are still needed. In terms of preventive strategies, use of power tools and quartz content of used materials were identified as main determinants of exposure. Lowering of exposures will be most efficient when focussed on these major determinants, e.g. tool dust control with water, dust extraction, and use of low quartz content materials.

Metagenome Across a Geochemical Gradient of Indian Stone Ruins Found at Historic Sites in Tamil Nadu, India.

Although stone surfaces seem unlikely to be habitable, they support microbial life. Life on these surfaces are subjected to many varying harsh conditions and require the inhabitants to exhibit resistance to environmental factors including UV irradiation, toxic metal exposure, and fluctuating temperatures and humidity. Here we report the effect of hosting stone geochemistry on the microbiome of stone ruins found in Tamil Nadu, India. The microbial communities found on the two lithologies, granite and granodiorite, hosted distinct populations of bacteria. Geochemical composition analysis of sampled stones revealed quartz mineral content as a major driver of microbial community structure, particularly promoting community richness and proportions of Cyanobacteria and Deinococcus-Thermus. Other geochemical parameters including ilmenite, albite, anorthite, and orthoclase components or elemental concentrations (Ti, Fe, Mn, Na, and K) also influenced community structure to a lesser degree than quartz. Core members of the stone microbiome community found on both lithologies were also identified and included Cyanobacteria (Chroococcidiopsaceae and Dapisostemonum CCIBt 3536), Rubrobacter, and Deinococcus. A cluster of taxa including Sphingomonas, Geodermatophilus, and Truepera were mostly found in the granodiorite samples. Community diversity correlated with quartz mineral content in these samples may indicate that the microbial communities that attach to quartz surfaces may be transient and regularly changing. This work has expanded our understanding of built-stone microbial community structure based on lithology and geochemistry.