Electrical aligned polyurethane nerve guidance conduit modulates macrophage polarization and facilitates immunoregulatory peripheral nerve regeneration.

Biomaterials can modulate the local immune microenvironments to promote peripheral nerve regeneration. Inspired by the spatial orderly distribution and endogenous electric field of nerve fibers, we aimed to investigate the synergistic effects of electrical and topological cues on immune microenvironments of peripheral nerve regeneration. Nerve guidance conduits (NGCs) with aligned electrospun nanofibers were fabricated using a polyurethane copolymer containing a conductive aniline trimer and degradable L-lysine (PUAT). In vitro experiments showed that the aligned PUAT (A-PUAT) membranes promoted the recruitment of macrophages and induced their polarization towards the pro-healing M2 phenotype, which subsequently facilitated the migration and myelination of Schwann cells. Furthermore, NGCs fabricated from A-PUAT increased the proportion of pro-healing macrophages and improved peripheral nerve regeneration in a rat model of sciatic nerve injury. In conclusion, this study demonstrated the potential application of NGCs in peripheral nerve regeneration from an immunomodulatory perspective and revealed A-PUAT as a clinically-actionable strategy for peripheral nerve injury.

Macrophages in guided bone regeneration: potential roles and future directions.

Guided bone regeneration (GBR) is one of the most widely used and thoroughly documented alveolar bone augmentation surgeries. However, implanting GBR membranes inevitably triggers an immune response, which can lead to inflammation and failure of bone augmentation. It has been shown that GBR membranes may significantly improve in vivo outcomes as potent immunomodulators, rather than solely serving as traditional barriers. Macrophages play crucial roles in immune responses and participate in the entire process of bone injury repair. The significant diversity and high plasticity of macrophages complicate our understanding of the immunomodulatory mechanisms underlying GBR. This review provides a comprehensive summary of recent findings on the potential role of macrophages in GBR for bone defects in situ. Specifically, macrophages can promote osteogenesis or fibrous tissue formation in bone defects and degradation or fibrous encapsulation of membranes. Moreover, GBR membranes can influence the recruitment and polarization of macrophages. Therefore, immunomodulating GBR membranes are primarily developed by improving macrophage recruitment and aggregation as well as regulating macrophage polarization. However, certain challenges remain to be addressed in the future. For example, developing more rational and sophisticated sequential delivery systems for macrophage activation reagents; addressing the interference of bone graft materials and dental implants; and understanding the correlations among membrane degradation, macrophage responses, and bone regeneration.

Osteoinductive micro-nano guided bone regeneration membrane for in situ bone defect repair.

BACKGROUND: Biomaterials used in bone tissue engineering must fulfill the requirements of osteoconduction, osteoinduction, and osseointegration. However, biomaterials with good osteoconductive properties face several challenges, including inadequate vascularization, limited osteoinduction and barrier ability, as well as the potential to trigger immune and inflammatory responses. Therefore, there is an urgent need to develop guided bone regeneration membranes as a crucial component of tissue engineering strategies for repairing bone defects. METHODS: The mZIF-8/PLA membrane was prepared using electrospinning technology and simulated body fluid external mineralization method. Its ability to induce biomimetic mineralization was evaluated through TEM, EDS, XRD, FT-IR, zeta potential, and wettability techniques. The biocompatibility, osteoinduction properties, and osteo-immunomodulatory effects of the mZIF-8/PLA membrane were comprehensively evaluated by examining cell behaviors of surface-seeded BMSCs and macrophages, as well as the regulation of cellular genes and protein levels using PCR and WB. In vivo, the mZIF-8/PLA membrane's potential to promote bone regeneration and angiogenesis was assessed through Micro-CT and immunohistochemical staining. RESULTS: The mineralized deposition enhances hydrophilicity and cell compatibility of mZIF-8/PLA membrane. mZIF-8/PLA membrane promotes up-regulation of osteogenesis and angiogenesis related factors in BMSCs. Moreover, it induces the polarization of macrophages towards the M2 phenotype and modulates the local immune microenvironment. After 4-weeks of implantation, the mZIF-8/PLA membrane successfully bridges critical bone defects and almost completely repairs the defect area after 12-weeks, while significantly improving the strength and vascularization of new bone. CONCLUSIONS: The mZIF-8/PLA membrane with dual osteoconductive and immunomodulatory abilities could pave new research paths for bone tissue engineering.

Fabrication and characterization of a multi-functional GBR membrane of gelatin-chitosan for osteogenesis and angiogenesis.

Guided bone regeneration (GBR) membranes are widely used to treat bone defects. In this study, sequential electrospinning and electrospraying techniques were used to prepare a dual-layer GBR membrane composed of gelatin (Gel) and chitosan (CS) containing simvastatin (Sim)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (Sim@PLGA/Gel-CS). As a GBR membrane, Sim@PLGA/Gel-CS could act as a barrier to prevent soft tissue from occupying regions of bone tissue. Furthermore, compared with traditional GBR membranes, Sim@PLGA/Gel-CS played an active role on stimulating osteogenesis and angiogenesis. Determination of the physical, chemical, and biological properties of Sim@PLGA/Gel-CS membranes revealed uniform sizes of the nanofibers and microspheres and appropriate morphologies. Fourier-transform infrared spectroscopy was used to characterize the interactions between Sim@PLGA/Gel-CS molecules and the increase in the number of amide groups in crosslinked membranes. The thermal stability and tensile strength of the membranes increased after N-(3-dimethylaminopropyl)-N9- ethylcarbodiimide/N-hydroxysuccinimide crosslinking. The increased fiber density of the barrier layer decreased fibroblast migration compared with that in the osteogenic layer. Osteogenic function was indicated by the increased alkaline phosphatase activity, calcium deposition, and neovascularization. In conclusion, the multifunctional effects of Sim@PLGA/Gel-CS on the barrier and bone microenvironment were achieved via its dual-layer structure and simvastatin coating. Sim@PLGA/Gel-CS has potential applications in bone tissue regeneration.

Zinc hybrid polyester barrier membrane accelerates guided tissue regeneration.

Barrier membranes play a pivotal role in the success of guided periodontal tissue regeneration. The biodegradable barriers predominantly used in clinical practice often lack sufficient barrier strength, antibacterial properties, and bioactivity, frequently leading to suboptimal regeneration outcomes. Although with advantages in mechanical strength, biodegradability and plasticity, bioinert aliphatic polyesters as barrier materials are usually polymerized via toxic catalysts, hard to be functionalized and lack of antibacterial properties. To address these challenges, we propose a new concept that controlled release of bioactive substance on the whole degradation course can give a bioinert aliphatic polyester bioactivity. Thus, a Zn-based catalytic system for polycondensation of dicarboxylic acids and diols is created to prepare zinc covalent hybrid polyester (PBS/ZnO). The atomically-dispersed Zn2+ ions entering main chain of polyester molecules endow PBS/ZnO barrier with antibacterial properties, barrier strength, excellent biocompatibility and histocompatibility. Further studies reveal that relying on long-term controlled release of Zn2+ ions, the PBS/ZnO membrane greatly expedites osteogenetic effect in guided tissue regeneration (GTR) by enhancing the mitochondrial function of macrophages to induce M2 polarization. These findings show a novel preparation strategy of bioactive polyester biomaterials based on long term controlled release of bioactive substance that integrates catalysis, material structures and function customization.

Remodeling of the Intra-Conduit Inflammatory Microenvironment to Improve Peripheral Nerve Regeneration with a Neuromechanical Matching Protein-Based Conduit.

Peripheral nerve injury (PNI) remains a challenging area in regenerative medicine. Nerve guide conduit (NGC) transplantation is a common treatment for PNI, but the prognosis of NGC treatment is unsatisfactory due to 1) neuromechanical unmatching and 2) the intra-conduit inflammatory microenvironment (IME) resulting from Schwann cell pyroptosis and inflammatory-polarized macrophages. A neuromechanically matched NGC composed of regenerated silk fibroin (RSF) loaded with poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (P:P) and dimethyl fumarate (DMF) are designed, which exhibits a matched elastic modulus (25.1 ± 3.5 MPa) for the peripheral nerve and the highest 80% elongation at break, better than most protein-based conduits. Moreover, the NGC can gradually regulate the intra-conduit IME by releasing DMF and monitoring sciatic nerve movements via piezoresistive sensing. The combination of NGC and electrical stimulation modulates the IME to support PNI regeneration by synergistically inhibiting Schwann cell pyroptosis and reducing inflammatory factor release, shifting macrophage polarization from the inflammatory M1 phenotype to the tissue regenerative M2 phenotype and resulting in functional recovery of neurons. In a rat sciatic nerve crush model, NGC promoted remyelination and functional and structural regeneration. Generally, the DMF/RSF/P:P conduit provides a new potential therapeutic approach to promote nerve repair in future clinical treatments.

Preparation and optimization of an eggshell membrane-based biomaterial for GTR applications.

OBJECTIVES: Guided Tissue Regeneration (GTR) is a popular clinical procedure for periodontal tissue regeneration. However, its key component, the barrier membrane, is largely collagen-based and is still quite expensive, posing a financial burden to the patients as well as healthcare systems and negatively impacting the patient's decision-making. Thus, our aim is to prepare a novel biomimetic GTR membrane utilizing a natural biomaterial, soluble eggshell membrane protein (SEP), which is economical as it comes from an abundant industrial waste from food and poultry industries, unlike collagen. Additive polymer, poly (lactic-co-glycolic acid) (PLGA), and a bioceramic, nano-hydroxyapatite (HAp), were added to improve its mechanical and biological properties. METHODS: For this barrier membrane preparation, we initially screened the significant factors affecting its mechanical properties using Taguchi orthogonal array design and further optimized the significant factors using response surface methodology. Furthermore, this membrane was characterized using SEM, EDAX, and ATR-FTIR, and tested for proliferation activity of human periodontal ligament fibroblasts (HPLFs). RESULTS: Optimization using response surface methodology predicted that the maximal tensile strength of 3.1 MPa and modulus of 39.9 MPa could be obtained at membrane composition of 8.9 wt% PLGA, 7.2 wt% of SEP, and 2 wt% HAp. Optimized PLGA/SEP/HAp membrane specimens that were electrospun on a static collector showed higher proliferation activity of HPLFs compared to tissue culture polystyrene and a commercial collagen membrane. SIGNIFICANCE: From the results observed, we can conclude that SEP-based nanofibrous GTR membrane could be a promising, environment-friendly, and cost-effective alternative for commercial collagen-based GTR membrane products.

Advances in guided bone regeneration membranes: a comprehensive review of materials and techniques.

Guided tissue/bone regeneration (GTR/GBR) is a widely used technique in dentistry to facilitate the regeneration of damaged bone and tissue, which involves guiding materials that eventually degrade, allowing newly created tissue to take its place. This comprehensive review the evolution of biomaterials for guided bone regeneration that showcases a progressive shift from non-resorbable to highly biocompatible and bioactive materials, allowing for more effective and predictable bone regeneration. The evolution of biomaterials for guided bone regeneration GTR/GBR has marked a significant progression in regenerative dentistry and maxillofacial surgery. Biomaterials used in GBR have evolved over time to enhance biocompatibility, bioactivity, and efficacy in promoting bone growth and integration. This review also probes into several promising fabrication techniques like electrospinning and latest 3D printing fabrication techniques, which have shown potential in enhancing tissue and bone regeneration processes. Further, the challenges and future direction of GTR/GBR are explored and discussed.

Development of a PVA/PCL/CS-Based Nanofibrous Membrane for Guided Tissue Regeneration and Controlled Delivery of Doxycycline Hydrochloride in Management of Periodontitis: In Vivo Evaluation in Rats.

Antibiotic administration is an adjacent therapy to guided tissue regeneration (GTR) in the management of periodontitis. This is due to the major role of pathogen biofilm in aggravating periodontal defects. This study aimed to fabricate a GTR membrane for sustained delivery of doxycycline hydrochloride (DOX) while having a space-maintaining function. The membranes were prepared using a polymeric blend of polycaprolactone/polyvinyl alcohol/chitosan by the electrospinning technique. The obtained membranes were characterized in terms of physicochemical and biological properties. Nanofibers showed a mean diameter in the submicron range of < 450 nm while having uniform randomly aligned morphology. The obtained membranes showed high strength and flexibility. A prolonged in vitro release profile during 68 h was observed for manufactured formulations. The prepared membranes showed a cell viability of > 70% at different DOX concentrations. The formulations possessed antimicrobial efficacy against common pathogens responsible for periodontitis. In vivo evaluation also showed prolonged release of DOX for 14 days. The histopathological evaluation confirmed the biocompatibility of the GTR membrane. In conclusion, the developed nanofibrous DOX-loaded GTR membranes may have beneficial characteristics in favour of both sustained antibiotic delivery and periodontal regeneration by space-maintaining function without causing any irritation and tissue damage.

Healing outcomes of open versus closed flap procedures for collagen membrane coverage following immediate dental implant placements with simultaneous guided tissue regeneration.

OBJECTIVE: To compare the outcomes of open healing to complete closure for collagen membrane coverage for immediate implant placements with simultaneous guided bone regeneration (GBR) in two retrospective cohorts. METHODS: The subjects included 118 patients who received Bio-Gide® collagen membrane coverage for immediate implant placements and GBR in 20 anterior and 98 posterior teeth. For 58 patients, gingival flaps were released to achieve full coverage of collagen membrane (CC group). For 60 patients, no efforts were made to release the gingival flaps and collagen membrane was left exposed for open healing (OH group). Antibiotics and analgesics were prescribed for 7 days after surgery. The width of crestal open wounds were measured after surgery (W0), and at 1, 2 and 16 weeks (W16). Changes in bone mass were assessed by cone-beam computed tomography after implant placement and again at W16. Gingival and bone tissues over the implant cover screws were harvested and assessed for 16 patients in the OH group at W16. RESULTS: No wound dehiscence occurred in the CC group from W0 to W16. Both the vertical and horizontal bone dimension changes were not significantly different between the OH and CC group. For the OH group, soft tissue was completely healed at W16 when the initial wound widths were ≤6 mm. For those with initial wound widths ≥ 7 mm, the cover screws were exposed in 5/16 patients at W16 but did not affect the final restorations. Tissue staining showed keratinized mucosa and new bone formation above the dental implant in the OH group. CONCLUSION: Open healing achieved healing outcomes similar to those of complete closure for collagen membrane coverage following immediate implant placements. CLINICAL SIGNIFICANCE: For immediate implant placement requiring bone grafting and collagen membrane coverage, it is unnecessary to release the gingival flaps or use tissue grafts to achieve full coverage of the crestal wounds. Open healing with exposed membrane could achieve similar outcomes with less pain and swelling.

Perspectives on the Novel Multifunctional Nerve Guidance Conduits: From Specific Regenerative Procedures to Motor Function Rebuilding.

Peripheral nerve injury potentially destroys the quality of life by inducing functional movement disorders and sensory capacity loss, which results in severe disability and substantial psychological, social, and financial burdens. Autologous nerve grafting has been commonly used as treatment in the clinic; however, its rare donor availability limits its application. A series of artificial nerve guidance conduits (NGCs) with advanced architectures are also proposed to promote injured peripheral nerve regeneration, which is a complicated process from axon sprouting to targeted muscle reinnervation. Therefore, exploring the interactions between sophisticated NGC complexes and versatile cells during each process including axon sprouting, Schwann cell dedifferentiation, nerve myelination, and muscle reinnervation is necessary. This review highlights the contribution of functional NGCs and the influence of microscale biomaterial architecture on biological processes of nerve repair. Progressive NGCs with chemical molecule induction, heterogenous topographical morphology, electroactive, anisotropic assembly microstructure, and self-powered electroactive and magnetic-sensitive NGCs are also collected, and they are expected to be pioneering features in future multifunctional and effective NGCs.

A bi-layered asymmetric membrane loaded with demineralized dentin matrix for guided bone regeneration.

OBJECTIVES: Guided bone regeneration (GBR) is a well-established method for repairing hard tissue deficiency in reconstructive dentistry. The aim of this study was to investigate the barrier function, osteogenic activity and immunomodulatory ability of a novel bi-layered asymmetric membrane loaded with demineralized dentin matrix (DDM). METHODS: DDM particles were harvested from healthy, caries-free permanent teeth. Electrospinning technique was utilized to prepare bi-layered DDM-loaded poly(lactic-co-glycolic acid) (PLGA)/poly(lactic acid) (PLA) membranes (abbreviated as DPP bilayer membranes). We analyzed the membranes' surface properties, cytocompatibility and barrier function, and evaluated their osteogenic activity in vitro. In addition, its effects on the osteogenic immune microenvironment were also investigated. RESULTS: Synthetic DPP bilayer membranes presented suitable surface characteristics and satisfactory cytocompatibility. Transwell assays showed significant fewer migrated cells by the DPP bilayer membranes compared with blank control, with or without in vitro degradation (all P < 0.001). In vitro experiments indicated that our product elevated messenger ribonucleic acid (mRNA) expression levels of osteogenic genes alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) and runt-related transcription factor 2 (Runx2). Among all groups, 20% DPP bilayer membrane displayed highest ALP activity (P < 0.001). Furthermore, DPP bilayer membranes enhanced the mRNA expression of M2 macrophage markers and increased the proportion of CD206+ M2 macrophages by 100% (20% DPP: P < 0.001; 30% DPP: P < 0.001; 40% DPP: P < 0.05), thus exerting an inflammation suppressive effect. CONCLUSIONS: DPP bilayer membranes exhibited notable biological safety and osteogenic activity in vitro, and have potential as a prospective candidate for GBR approach in the future.

Electrospun Nanofibrous Conduit Filled with a Collagen-Based Matrix (ColM) for Nerve Regeneration.

Traumatic nerve defects result in dysfunctions of sensory and motor nerves and are usually accompanied by pain. Nerve guidance conduits (NGCs) are widely applied to bridge large-gap nerve defects. However, few NGCs can truly replace autologous nerve grafts to achieve comprehensive neural regeneration and function recovery. Herein, a three-dimensional (3D) sponge-filled nanofibrous NGC (sf@NGC) resembling the structure of native peripheral nerves was developed. The conduit was fabricated by electrospinning a poly(L-lactide-co-glycolide) (PLGA) membrane, whereas the intraluminal filler was obtained by freeze-drying a collagen-based matrix (ColM) resembling the extracellular matrix. The effects of the electrospinning process and of the composition of ColM on the physicochemical performance of sf@NGC were investigated in detail. Furthermore, the biocompatibility of the PLGA sheath and ColM were evaluated. The continuous and homogeneous PLGA nanofiber membrane had high porosity and tensile strength. ColM was shown to exhibit an ECM-like architecture characterized by a multistage pore structure and a high porosity level of over 70%. The PLGA sheath and ColM were shown to possess stagewise degradability and good biocompatibility. In conclusion, sf@NGC may have a favorable potential for the treatment of nerve reconstruction.

Polycaprolactone-based scaffolds for guided tissue regeneration in periodontal therapy: A systematic review.

BACKGROUND: Polycaprolactone (PCL) is a highly recognized synthetic polymer for its biocompatibility, ease of fabrication and mechanical strength in bone tissue engineering. Its applications have extended broadly, including regeneration of oral and maxillofacial lost tissues. Its usefulness has brought attention of researchers to regenerate periodontal lost tissues, including alveolar bone, periodontal ligament and cementum. The aim of this systematic review was to obtain an updated analysis of the contribution of PCL-based scaffolds in the alveolar bone regeneration process. METHODS: This review adheres to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines for systematic reviews. A computerized search of the PubMed, EBSCO, Scielo and Web of Science databases was performed, restricting literature search to published studies in English or Spanish between January 2002 and March 2023. Database search returned 248 studies which were screened based on title, author names and publication dates. RESULTS: Data from 17 studies were reviewed and tabulated. All studies combined PCL with other biomaterials (such as Alginate, hydroxyapatite, bioactive glass, poly (lactic-co-glycolic acid)), growth factors (BMP-2, rhCEMP1), and/or mesenchymal stromal cells (adipose-derived, bone marrow, periodontal ligament or gingiva mesenchymal stromal cells). PCL scaffolds showed higher cell viability and osteoinductive potential when combined with bioactive agents. Complementary, its degradation rates were affected by the addition or exposure to specific substances, such as: Dopamine, Cerium Oxide, PLGA and hydrogen peroxide. CONCLUSIONS: PCL is an effective biomaterial for alveolar bone regeneration in periodontally affected teeth. It could be part of a new generation of biomaterials with improved regenerative potential.

Neo-osteogenesis using an intentionally exposed polypropylene membrane after tooth extraction versus guided bone regeneration technique: a single-blind randomized controlled trial / Neo-osteogénesis utilizando una membrana de polipropileno expuesta intencionalmente después de la extracción del diente versus técnica de regeneración ósea guiada: ensayo clínico aleatorizado ciego / Neo-osteogênese utilizando uma membrana de polipropileno exposta intencionalmente após extração dentária versus técnica de regeneração óssea guiada: ensaio clínico randomizado e cego

Introduction: The intentionally exposed polypropylene (PP) membrane has been proposed for guided bone regeneration (GBR) of the alveo lar bone after extraction; however, there are biological limitations to this proposal. This study aimed to describe the effects of the PP membrane on neo-osteogenesis after tooth extraction, comparing to intentionally ex posed and primary soft tissue coverage techniques. Methodology: This clinical trial followed the TIDieR checklist and guide. Clinical and histo logical parameters of alveolar repair were compared between groups: 1 (control group), without regenerative procedure; 2, GBR; and 3, inten tionally exposed membrane. Results: Group 3 showed slight effect on the quality of new bone, compared to the control group. Although the GBR was underestimated by the early exposure of the membrane, alveo lar repair and newly formed bone were superior to the other groups. Poly propylene membrane intentionally exposed compromised the volume density of the immature and mineralized bone matrix, the osteoblast and osteocyte count, and stimulated the granulation tissue formation and local inflammatory infiltrate. Conclusions: Despite the exposure of the PP membrane in GBR, this technique improved the quality of new bone and alveolar repair compared to the surgical technique of intentional exposure and alveolus only sutured.

RESUMEN Introducción: La membrana de polipropileno (PP) intencionalmente expuesta ha sido propuesta para la regeneración ósea guiada (GBR) del hueso alveolar después de la extracción; sin embargo, existen limitaciones biológicas a esta propuesta. Este estudio tuvo como objetivo describir los efectos de la membrana de PP en la neo-osteogénesis después de la extracción del diente, en comparación con las técnicas de cobertura de tejido blando primarias y expuestas intencionalmente. Metodología: Este ensayo clínico siguió la lista de verificación y la guía TIDieR. Se compararon los parámetros clínicos e histológicos de la reparación alveolar entre los grupos: 1 (grupo control), sin procedimiento regenerativo; 2, GBR; y 3, membrana expuesta intencionalmente. Resultados: el grupo 3 mostró un ligero efecto sobre la calidad del hueso nuevo, en comparación con el grupo de control. Aunque la GBR fue subestimada por la exposición temprana de la membrana, la reparación alveolar y el hueso neoformado fueron superiores a los otros grupos. La membrana de polipropileno expuesta intencionalmente comprometió la densidad de volumen de la matriz ósea inmadura y mineralizada, el recuento de osteoblastos y osteocitos, y estimuló la formación de tejido de granulación y el infiltrado inflamatorio local. Conclusiones: A pesar de la exposición de la membrana de PP en GBR, esta técnica mejoró la calidad del hueso nuevo y la reparación alveolar en comparación con la técnica quirúrgica de exposición intencional y alvéolo solo suturado.

Introdução: A membrana de polipropileno (PP) intencionalmente exposta tem sido proposta para regeneração óssea guiada (ROG) do osso alveolar após exodontia; no entanto, existem limitações biológicas a esta proposta. Este estudo teve como objetivo descrever os efeitos da membrana de PP na neo-osteogênese após a extração dentária, comparando com as técnicas de exposição intencional e cobertura primária de tecidos moles. Metodologia: Este ensaio clínico seguiu a lista de verificação e o guia TIDieR. Parâmetros clínicos e histológicos do reparo alveolar foram comparados entre os grupos: 1 (grupo controle), sem procedimento regenerativo; 2, GBR; e 3, membrana intencionalmente exposta. Resultados: O Grupo 3 apresentou leve efeito na qualidade do novo osso, em comparação com o grupo controle. Embora o GBR tenha sido subestimado pela exposição precoce da membrana, o reparo alveolar e o osso neoformado foram superiores aos outros grupos. A exposição intencional da membrana de polipropileno comprometeu a densidade volumétrica da matriz óssea imatura e mineralizada, a contagem de osteoblastos e osteócitos e estimulou a formação de tecido de granulação e infiltrado inflamatório local. Conclusões: Apesar da exposição da membrana PP na ROG, esta técnica melhorou a qualidade do novo osso e da reparação alveolar em comparação com a técnica cirúrgica de exposição intencional e alvéolo apenas suturado.

[Advances in the raw material selection and functional design of artificial nerve guidance conduits].

Artificial nerve guidance conduits (NGCs) are synthetic nerve grafts that are capable of providing the structural and nutritional support for nerve regeneration. The ideal NGCs have plenty of requirements on biocompatibility, mechanical strength, topological structure, and conductivity. Therefore, it is necessary to continuously improve the design of NGCs and establish a better therapeutic strategy for peripheral nerve injury in order to meet clinical needs. Although current NGCs have made certain process in the treatment of peripheral nerve injury, their nerve regeneration and functional outcomes on repairing long-distance nerve injury remain unsatisfactory. Herein, we review the nerve conduit design from four aspects, namely raw material selection, structural design, therapeutic factor loading and self-powered component integration. Moreover, we summarize the research progress of NGCs in the treatment of peripheral nerve injury, in order to facilitate the iterative updating and clinical transformation of NGCs.

Combined surgical and conservative endodontic management of Oehler's type 3b dens invaginatus aided by guided tissue regeneration.

The present case describes the successful healing of a periapical lesion associated with the left maxillary lateral incisor (# 22, Federation Dentaire Internationale) having a type 3b dens invaginatus tooth morphology. The treatment was complicated by the presence of blunderbuss root apex and large periapical lesion (>10 mm) with through and through bone defect (Bucco palatal cortical bone perforation, Von Arx Type 1b). An adolescent boy reported palatal swelling and pus discharge in relation to tooth #22. A thorough clinical and radiographic examination revealed tooth #22 as having a type 3b dens invaginatus with an open apex and a diagnosis of pulp necrosis and acute apical abscess. The case was managed by non-surgical root canal treatment followed by endodontic surgery using principles of guided tissue regeneration. A 5-year recall revealed an asymptomatic functional tooth with complete healing.

Trackable and highly fluorescent nanocellulose-based printable bio-resins for image-guided tissue regeneration.

Dynamic tracking of cell migration during tissue regeneration remains challenging owing to imaging techniques that require sophisticated devices, are often lethal to healthy tissues. Herein, we developed a 3D printable non-invasive polymeric hydrogel based on 2,2,6,6-(tetramethylpiperidin-1-yl) oxyl (TEMPO)-oxidized nanocellulose (T-CNCs) and carbon dots (CDs) for the dynamic tracking of cells. The as-prepared T-CNC@CDs were used to fabricate a liquid bio-resin containing gelatin methacryloyl (GelMA) and polyethylene glycol diacrylate (GPCD) for digital light processing (DLP) bioprinting. The shear-thinning properties of the GPCD bio-resin were further improved by the addition of T-CNC@CDs, allowing high-resolution 3D printing and bioprinting of human cells with higher cytocompatibility (viability ∼95 %). The elastic modulus of the printed GPCD hydrogel was found to be ∼13 ± 4.2 kPa, which is ideal for soft tissue engineering. The as-fabricated hydrogel scaffold exhibited tunable structural color property owing to the addition of T-CNC@CDs. Owing to the unique fluorescent property of T-CNC@CDs, the human skin cells could be tracked within the GPCD hydrogel up to 30 days post-printing. Therefore, we anticipate that GPCD bio-resin can be used for 3D bioprinting with high structural stability, dynamic tractability, and tunable mechanical stiffness for image-guided tissue regeneration.

Multifunctional hydrogel/platelet-rich fibrin/nanofibers scaffolds with cell barrier and osteogenesis for guided tissue regeneration/guided bone regeneration applications.

Periodontal defect seriously affects people's life health and quality. Guided tissue regeneration (GTR) and guided bone regeneration (GBR) have made great progress in periodontal disease treatment, but some deficiencies existed in commercial materials of GTR and GBR. For obtaining better therapeutic effects, multifunctional composite scaffolds containing different biological macromolecules were developed in this study. Chitosan/poly (γ-glutamic acid)/nano-hydroxyapatite hydrogels (CP/nHA) made by electrostatic interactions and lyophilization were filled in the bone defects to achieve osteogenesis. Platelet-rich fibrin (PRF) extracted from blood could accelerate bone formation by releasing various bioactive substances as middle layer of composite scaffolds. Polycaprolactone/gelatin nanofibers (PG) prepared by electrospinning were attached to the junction of soft and hard tissue, which could prevent fibrous tissue from infiltrating into bone defects. The composite scaffolds showed good morphology, biocompatibility, cell barriers and osteogenic differentiation in vitro. The excellent ability of bone formation was verified by implantation of triple-layered composite scaffolds into alveolar bone defects in rabbit in vivo. The hierarchical structure was conducive to personalized customization to meet the needs of different defects. All in all, the multifunctional scaffolds could play important roles of GTR and GBR in alveolar bone regeneration and provide good application prospect for bone repair in clinic.

Regeneração óssea guiada para aumento horizontal de rebordo utilizando fibrina rica em plaquetas associada a enxertos ósseos: revisão de literatura / Guided bone regenerationfor horizontal bone augmentation using platelet- rich fibrin associated with bone grafts: literature review

Objetivo: revisar a literatura sobre os diferentes tipos de derivados de plaquetas autólogas e o desempenho clínico do uso do sticky bone para aumento ósseo horizontal de rebordo. Materiais e métodos: Para realização dessa revisão foram realizadas buscas nas bases de dados PubMed, Google Scholar e Web of Science, utilizando os seguintes descritores: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". Foram incluídos artigos publicados em inglês, que abordavam conceitos relacionados aos agregados plaquetários e a regeneração óssea guiada para aumento ósseo horizontal de rebordo utilizando fibrina rica em plaquetas associada à enxertos ósseos (sticky bone). Resultados: Após avaliação dos estudos encontrados foram selecionados 11 artigos sobre o uso do sticky bone para aumento horizontal de rebordo. Para compor este trabalho foram selecionados também 14 estudos de revisão e artigos associados ao tema. Por ser de fácil aplicação e obtenção, muitos autores têm estudado as aplicações cirúrgicas do sticky bone e os resultados demonstram que o aumento horizontal do rebordo utilizando essa técnica pode ser realizado de forma previsível. Conclusão: apesar de haver estudos promissores sobre o uso do sticky bone, falta evidência na literatura sobre seu sucesso clínico. Assim, para compreender o potencial regenerativo desta técnica são necessários um maior número de estudos randomizados, com diferentes materiais de enxerto e protocolos padronizados de obtenção do sticky bone.(AU)

Objective: to review the literature on the different types of autologous platelet derivatives and the clinical performance of using sticky bone for horizontal bone ridge augmentation. Materials and methods: In order to conduct this review, it was conducted searches in the PubMed, Google Scholar, and Web of Science databases using the following descriptors: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". It included articles published in English that addressed concepts related to platelet aggregates and guided bone regeneration for horizontal bone augmentation using platelet-rich fibrin associated with bone grafts (sticky bone). Results: After evaluating the studies found, were selected 11 articles on the use of sticky bone for horizontal ridge augmentation. To compose this work, 14 review studies and articles associated with the topic were also selected. Due to its ease of application and availability, many authors have explored the surgical applications of sticky bone, and the results indicate that horizontal ridge augmentation using this technique can be predictably performed. Conclusion: while there are promising studies on the use of sticky bone, the literature lacks evidence regarding its clinical success. Therefore, to fully understand the regenerative potential of this technique, further randomized studies are needed, involving different graft materials and standardized protocols for obtaining sticky bone.(AU)