Fabrication and characterization of a multi-functional GBR membrane of gelatin-chitosan for osteogenesis and angiogenesis.

Guided bone regeneration (GBR) membranes are widely used to treat bone defects. In this study, sequential electrospinning and electrospraying techniques were used to prepare a dual-layer GBR membrane composed of gelatin (Gel) and chitosan (CS) containing simvastatin (Sim)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (Sim@PLGA/Gel-CS). As a GBR membrane, Sim@PLGA/Gel-CS could act as a barrier to prevent soft tissue from occupying regions of bone tissue. Furthermore, compared with traditional GBR membranes, Sim@PLGA/Gel-CS played an active role on stimulating osteogenesis and angiogenesis. Determination of the physical, chemical, and biological properties of Sim@PLGA/Gel-CS membranes revealed uniform sizes of the nanofibers and microspheres and appropriate morphologies. Fourier-transform infrared spectroscopy was used to characterize the interactions between Sim@PLGA/Gel-CS molecules and the increase in the number of amide groups in crosslinked membranes. The thermal stability and tensile strength of the membranes increased after N-(3-dimethylaminopropyl)-N9- ethylcarbodiimide/N-hydroxysuccinimide crosslinking. The increased fiber density of the barrier layer decreased fibroblast migration compared with that in the osteogenic layer. Osteogenic function was indicated by the increased alkaline phosphatase activity, calcium deposition, and neovascularization. In conclusion, the multifunctional effects of Sim@PLGA/Gel-CS on the barrier and bone microenvironment were achieved via its dual-layer structure and simvastatin coating. Sim@PLGA/Gel-CS has potential applications in bone tissue regeneration.

The Development of Thermoresponsive Polymeric Simvastatin Prodrug for the Treatment of Experimental Periodontitis in Rats.

Periodontitis (PD) is a severe inflammatory gum pathology that damages the periodontal soft tissue and bone. It is highly prevalent in the US, affecting more than 47% of adults. Besides routine scaling and root planing, there are few effective treatments for PD. Developed as an effective treatment for hyperlipidemia, simvastatin (SIM) is also known for its well-established anti-inflammatory and osteogenic properties, suggesting its potential utility in treating PD. Its clinical translation, however, has been impeded by its poor water-solubility, lack of osteotropicity, and side effects (e.g., hepatoxicity) associated with systemic exposure. To address these challenges, an N-(2-hydroxypropyl) methacrylamide (HPMA) copolymer-based thermoresponsive polymeric prodrug of SIM (ProGel-SIM) was developed as a local therapy for PD. Its aqueous solution is free-flowing at 4 °C and transitions into a hydrogel at ∼30 °C, allowing for easy local application and retention. After a thorough characterization of its physicochemical properties, ProGel-SIM was administered weekly into the periodontal pocket of an experimental rat model of PD. At 3 weeks post initiation of the treatment, the animals were euthanized with palate isolated for µ-CT and histological analyses. When compared to dose equivalent simvastatin acid (SMA, active form of SIM) treatment, the rats in the ProGel-SIM treated group showed significantly higher periodontal bone volume (0.34 mm3 vs 0.20 mm3, P = 0.0161) and less neutrophil (PMN) infiltration (P < 0.0001) and IL-1ß secretion (P = 0.0036). No measurable side effect was observed. Collectively, these results suggest that ProGel-SIM may be developed as a promising drug candidate for the effective clinical treatment of PD.

Molecular Complex of HSIM-loaded Polymeric Nanoparticles: Potential Carriers in Osteoporosis.

BACKGROUND: Statins, especially simvastatin promote bone formation by stimulating the activity of osteoblasts and suppressing osteoclast activity via the BMP-Smad signaling pathway. Statins present the liver first-pass metabolism. This study attempts to fabricate and evaluate simvastatin functionalized hydroxyapatite encapsulated in poly(lactic-co-glycolic) acid (PLGA) nanoparticles (HSIM-PLGA NPs) administered subcutaneously with sustained release properties for effective management of osteoporosis. METHODS: Simvastatin functionalized hydroxyapatite (HSIM) was prepared by stirring and validated by docking studies, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Further, HSIM-loaded PLGA nanoparticles (HSIM-PLGA NPs) were developed via the solvent emulsification method. The nanoparticles were evaluated for zeta potential, particle size, entrapment efficiency, stability studies, and in vitro drug release studies. in vitro binding affinity of nanoparticles for hydroxyapatite was also measured. Bone morphology and its effect on bone mineral density were examined by using a glucocorticoid-induced osteoporosis rat model. RESULTS: The optimized nanoparticles were found to be amorphous and showed no drug-polymer interaction. The particle size of formulated nanoparticles varied from 196.8 ± 2.27nm to 524.8 ± 5.49 nm and the entrapment efficiency of nanoparticles varied from 41.9 ± 3.44% to 70.8 ± 4.46%, respectively. The nanoparticles showed sustained release behaviour (75% in 24 hr) of the drug followed by non-fickian drug release. The nanoparticles exhibited high binding affinity to bone cell receptors, increasing bone mineral density. A significant difference in calcium and phosphorous levels was observed in disease and treatment rats. Porous bone and significant improvement in porosity were observed in osteoporotic rats and treated rats, respectively (P < 0.05). CONCLUSION: Bone-targeting nanoparticles incorporating functionalized simvastatin can target bone. Thus, in order to distribute simvastatin subcutaneously for the treatment of osteoporosis, the developed nanoparticles may act as a promising approach.

Evaporative Crystallization of Simvastatin from Different Solutions Using Mid-Frequency Raman Difference Spectra Explanations.

Amorphous simvastatin (amorphous SIM) and Form I of SIM were prepared separately from SIM acetone (AC)/ethyl acetate (ETAC)/ethanol (ET) solutions by simply controlling the solvent evaporation rate, and the kinetic formation of amorphous SIM from SIM AC/ETAC/ET solutions was explained using mid-frequency Raman difference spectra analysis. The mid-frequency Raman difference spectra analysis results indicate that the amorphous phase has close connections with solutions and might be the bridge, playing an important role in the intermediate phase, between solutions and their outcome polymorphs.

Development and Evaluation of Self-Emulsifying Drug-Delivery System-Based Tablets for Simvastatin, a BCS Class II Drug.

Background: Self-emulsifying drug-delivery systems (SEDDSs) are designed to improve the oral bioavailability of poorly water-soluble drugs. This study aimed at formulating and characterization of SEDDS-based tablets for simvastatin using castor and olive oils as solvents and Tween 60 as surfactant. Methods: The liquids were adsorbed on microcrystalline cellulose, and all developed formulations were compressed using 10.5 mm shallow concave round punches. Results: The resulting tablets were evaluated for different quality-control parameters at pre- and postcompression levels. Simvastatin showed better solubility in a mixture of oils and Tween 60 (10:1). All the developed formulations showed lower self-emulsification time (˂200 seconds) and higher cloud point (˃60°C). They were free of physical defects and had drug content within the acceptable range (98.5%-101%). The crushing strength of all formulations was in the range of 58-96 N, and the results of the friability test were within the range of USP (≤1). Disintegration time was within the official limits (NMT 15 min), and complete drug release was achieved within 30 min. Conclusion: Using commonly available excipients and machinery, SEDDS-based tablets with better dissolution profile and bioavailability can be prepared by direct compression. These S-SEDDSs could be a better alternative to conventional tablets of simvastatin.

Strontium and simvastatin dual loaded hydroxyapatite microsphere reinforced poly(ε-caprolactone) scaffolds promote vascularized bone regeneration.

The promotion of vascular network formation in the early stages of implantation is considered a prerequisite for successful functional bone regeneration. In this study, we successfully constructed 3D printed scaffolds with strong mechanical strength and a controllable pore structure that can sustainably release strontium (Sr) ions and simvastatin (SIM) for up to 28 days by incorporation of Sr2+ and SIM-loaded hydroxyapatite microspheres (MHA) into a poly(ε-caprolactone) (PCL) matrix. In vitro cell experiments showed that Sr-doped scaffolds were beneficial to the proliferation and osteogenic differentiation of bone mesenchymal stem cells (BMSCs), an appropriate dose of SIM was beneficial to cell proliferation and angiogenesis, and a high dose of SIM was cytotoxic. The Sr- and SIM-dual-loaded scaffolds with an appropriate dose significantly induced osteogenic differentiation of BMSCs and tube formation of human umbilical vein endothelial cells (HUVECs) in vitro and promoted vascular network and functional bone formation in vivo. Ribose nucleic acid (RNA) sequencing analysis suggested that the mechanism of promotion of vascularized bone regeneration by fabricated scaffolds is that dual-loaded Sr2+ and SIM can upregulate osteogenic and vasculogenic-related genes and downregulate osteoclast-related genes, which is beneficial for vascular and new bone regeneration. The 3D printed composite scaffolds loaded with high-stability and low-cost inorganic Sr2+ ions and SIM small-molecule drugs hold great promise in the field of promoting vascularized bone regeneration.

Co-amorphous systems using epigallocatechin-3-gallate as a co-former: Stability, in vitro dissolution, in vivo bioavailability and underlying molecular mechanisms.

Co-amorphous strategy has been extensively investigated to improve the dissolution of hydrophobic drugs. Here, epigallocatechin-3-gallate (EGCG) was exploited as a co-former in co-amorphous systems based on its unique structure including phenyl rings, phenolic hydroxyl groups and the galloyl moiety. Two model BCS class II drugs, simvastatin (SIM) and nifedipine (NIF), were selected to be co-amorphized with EGCG. All drug-EGCG systems at three molar ratios became amorphous by the means of spray drying and showed high physically stable either under dry condition and 75 % RH at 40 °C or under dry conditions at 25 °C. The optimal feed molar ratios of both EGCG based co-amorphous systems fabricated were determined to be three, under which the significant increases were obtained in the maximum apparent concentrations of 4.90-fold for SIM at 1 h and 106.03-fold for NIF at 0.25 h compared to crystalline drugs by non-sink dissolution studies. The underlying molecular mechanisms of two co-amorphous systems formation were involved in molecular miscibility, hydrogen bonds and π-π stacking interactions unraveled by means of DSC, FTIR and molecular dynamics simulations. More to the point, oral pharmacokinetic studies in rats demonstrated that co-amorphous SIM-EGCG and NIF-EGCG systems at 1:3 have a significant increase in Cmax of 1.81- and 5.69-fold, and AUC 0-24h of 1.62- and 4.57-fold compared with those of corresponding crystalline drugs, respectively. In conclusion, EGCG is proved to be a promising co-former in co-amorphous systems.

Preparing simvastatin nanoparticles by a combination of pH-sensitive and timed-release approaches for the potential treatment of ulcerative colitis.

In this study, an emulsion solvent evaporation method was used to produce Eudragit RL (ERL) nanoparticles (NPs) loaded with simvastatin (SIM) for the treatment of ulcerative colitis (UC). Accordingly, the effects of different formulation variables on the properties of NPs were evaluated using the Box-Behnken design. The optimized NPs were then coated by Eudragit FS30D (EFS30D). Drug release was studied in different physiological environments. Colitis was induced by 3% of acetic acid in rats, which received NPs of SIM (10 mg/kg/day), mesalazine (150 mg/kg/day), blank NPs and normal saline orally for 5 days. Macroscopic histopathological evaluation and biochemical analysis, including myeloperoxidase (MPO) activity and malondialdehyde (MDA) level in the colon tissues, were carried out in this study. The optimized SIM-ERL NPs showed the particle size of 182.48 ± 4.57 nm, the polydispersity index of 0.29 ± 0.12, the zeta potential of 26.45 ± 4.57 mV, drug loading % of 34.64 ± 0.48, the encapsulation efficiency % of 98.68 ± 0.69, and the release efficiency % of 35.78 ± 1.37. Coating the optimized NPs with EFS30D caused an increase in particle size and a decrease in the zeta potential of NPs. The optimized SIM-EFS30D/RL NPs improved the macroscopic and histopathological scores. Also, MPO activity and MDA level were reduced significantly by NPs, as compared to the control group. Therefore, this drug delivery system can be an alternative to the previous treatments of UC.

De novo dual functional 3D scaffold using computational simulation with controlled drug release.

A novel and facile synthesis is made of cotton-like three-dimensional (3D) fibrous scaffold containing spatiotemporally defined patterns of simvastatin (SIM) optimized for angiogenesis-coupled osteogenesis. Herein, we demonstrate the 3D fiber deposition mechanism in detail during the electrospinning process via computer simulation. The 3D fibrous scaffolds were functionalized with hydroxyapatite nanoparticles (HA - NPs) to induce the biomineralization process mimicking the natural apatite layer. The morphology, physiochemical properties, biomimetic mineralization, and drug release of the as-fabricated 3D fibrous scaffolds of simvastatin-loaded poly (ɛ-caprolactone) poly (glycerol-sebacate) hydroxyapatite nanoparticles (3D - PGHS) were investigated. The effects of simvastatin on the osteogenic differentiation of human mesenchymal stem cells (hMSCs) and angiogenesis in human umbilical vein endothelial cells (HUVECs) were assessed. The results showed that the 3D - PGHS both enhanced the expression of osteogenic markers including ALP, RUNX2, and COLA1 in hMSCs, and promoted the migration and tube formation of HUVECs. This finding demonstrates the potential of 3D scaffold-loaded SIM as a putative point-of-care therapy for tightly controlled tissue regeneration.

Enantiotropy of Simvastatin as a Result of Weakened Interactions in the Crystal Lattice: Entropy-Driven Double Transitions and the Transient Modulated Phase as Seen by Solid-State NMR Spectroscopy.

In crystalline molecular solids, in the absence of strong intermolecular interactions, entropy-driven processes play a key role in the formation of dynamically modulated transient phases. Specifically, in crystalline simvastatin, the observed fully reversible enantiotropic behavior is associated with multiple order-disorder transitions: upon cooling, the dynamically disordered high-temperature polymorphic Form I is transformed to the completely ordered low-temperature polymorphic Form III via the intermediate (transient) modulated phase II. This behavior is associated with a significant reduction in the kinetic energy of the rotating and flipping ester substituents, as well as a decrease in structural ordering into two distinct positions. In transient phase II, the conventional three-dimensional structure is modulated by periodic distortions caused by cooperative conformation exchange of the ester substituent between the two states, which is enabled by weakened hydrogen bonding. Based on solid-state NMR data analysis, the mechanism of the enantiotropic phase transition and the presence of the transient modulated phase are documented.

Electrochemical Oxidation of Different Therapeutic Classes of Pharmaceuticals Using Graphite-PVC Composite Electrode.

This study reports electrochemical treatment of different therapeutic classes of pharmaceuticals (caffeine, prazosin, enalapril, carbamazepine, nifedipine, levonorgestrel, and simvastatin) in a mixture. The electrochemical process was investigated using graphite-PVC anode at different applied voltages (3, 5, and 12 V), initial concentrations of studied pharmaceuticals in aqueous solution (5 and 10 mg/L), and concentrations of sodium chloride (1 and 2 g/L). The % removal of pharmaceuticals increased with the applied voltage, and was found higher than 98% after 50 min of electrolysis at 5 V. Energy consumption ranged between 0.760 and 3.300 Wh/mg using 12 V being the highest value compared to 3 and 5 V. The formation of chlorinated by-products from four selected pharmaceuticals, simvastatin (C11H13Cl3O5, and C10H12Cl4O3), prazosin (C13H12Cl3N5O3 and C10H11Cl4N2O2), carbamazepine and caffeine (C15H11N2O2Cl and C8H9N4O2Cl) was identified and elucidated using liquid chromatography-time of flight mass spectrometry (LC-TOF/MS).

IAF, QGF, and QDF Peptides Exhibit Cholesterol-Lowering Activity through a Statin-like HMG-CoA Reductase Regulation Mechanism: In Silico and In Vitro Approach.

In this study, in silico approaches are employed to investigate the binding mechanism of peptides derived from cowpea ß-vignin and HMG-CoA reductase. With the obtained information, we designed synthetic peptides to evaluate their in vitro enzyme inhibitory activity. In vitro, the total protein extract and <3 kDa fraction, at 5000 µg, support this hypothesis (95% and 90% inhibition of HMG-CoA reductase, respectively). Ile-Ala-Phe, Gln-Gly-Phe, and Gln-Asp-Phe peptides were predicted to bind to the substrate binding site of HMGCR via HMG-CoAR. In silico, it was established that the mechanism of HMG-CoA reductase inhibition largely entailed mimicking the interactions of the decalin ring of simvastatin and via H-bonding; in vitro studies corroborated the predictions, whereby the HMG-CoA reductase activity was decreased by 69%, 77%, and 78%, respectively. Our results suggest that Ile-Ala-Phe, Gln-Gly-Phe, and Gln-Asp-Phe peptides derived from cowpea ß-vignin have the potential to lower cholesterol synthesis through a statin-like regulation mechanism.

Simvastatin induced ferroptosis for triple-negative breast cancer therapy.

Triple-negative breast cancer (TNBC), a management of aggressive breast cancer, remains an unmet medical challenge. Although a wave of efforts had spurred to design novel therapeutic method of TNBC, unpredictable prognosis with lacking effective therapeutic targets along with the resistance to apoptosis seriously limited survival benefits. Ferroptosis is a non-apoptotic form of cell death that is induced by excessive lipid peroxidation, which provide an innovative way to combat cancer. Emerging evidence suggests that ferroptosis plays an important role in the treatment of TNBC cells. Herein, a novel ferroptosis nanomedicine was prepared by loading simvastatin (SIM), a ferroptosis drug, into zwitterionic polymer coated magnetic nanoparticles (Fe3O4@PCBMA) to improve the therapeutic effect of TNBC. The as-obtained Fe3O4@PCBMA-SIM nanoparticles demonstrated more cytotoxicity against MDA-MB-231 than MCF-7 due to the higher expression of 3-hydroxy-3-methyl-glutaryl-coenzyme A reductase (HMGCR), which demonstrated that statins could effectively kill TNBC. Further experiments showed that SIM could inhibit the expression of HMGCR to downregulate the mevalonate (MVA) pathway and glutathione peroxidase 4 (GPX4), thereby inducing cancer cell ferroptosis. What's more, PCBMA endows Fe3O4@PCBMA longer blood circulation performance to enhance their accumulation at tumor sites. Given that Fe3O4 have proven for clinical applications by the U.S. Food and Drug Administration (FDA) and SIM could induce cancer cell ferroptosis, the developed Fe3O4@PCBMA-SIM nanosystem would have great potential in clinics for overcoming the drug resistance brought about by apoptotic drugs to cancer cells.

Co-delivery of simvastatin and demineralized bone matrix hierarchically from nanosheet-based supramolecular hydrogels for osteogenesis.

Supramolecular hydrogels are widely used as 3D scaffolds and delivery platforms in tissue engineering applications. However, hydrophobic therapeutic agents exhibit weak compatibility in hydrogel scaffolds along with aggregation and precipitation. Herein, simvastatin drugs used as BMP-2 stimulators are encapsulated into the layer space of LAPONITE® via electrostatic interactions and ion exchange efficiently, and supramolecular hydrogels could be fabricated with a self-healing, injectable and sustained drug release nature. Hydrogels encapsulated with 10 µg mL-1 simvastatin drug show good osteogenic differentiation in vitro. Moreover, the loading of demineralized bone matrix particles could enhance the capacity for osteogenesis via improving the expression of BMP-2 synergistically. The integrated hydrogels could be implanted into cranial defect sites for bone regeneration in vivo. This work provides the first demonstration of molecular and supramolecular engineering of hydrogels to load osteoinductive agents hierarchically for bone regeneration, contributing to the development of a brand-new strategy for dealing with compatibility between scaffolds and osteogenic agents.

Ternary Eutectic Ezetimibe-Simvastatin-Fenofibrate System and the Physical Stability of Its Amorphous Form.

In this study, the phase diagram of the ternary system of ezetimibe-simvastatin-fenofibrate was established. It has been proven that the ternary composition recommended for the treatment of mixed hyperlipidemia forms a eutectic system. Since eutectic mixtures are characterized by greater solubility and dissolution rate, the obtained result can explain the marvelous medical effectiveness of combined therapy. Considering that another well-known method for improving the aqueous solubility is amorphization, the ternary system with eutectic concentration was converted into an amorphous form. Thermal properties, molecular dynamics, and physical stability of the obtained amorphous system were thoroughly investigated through various experimental techniques compared to both: neat amorphous active pharmaceutical ingredients (considered separately) and other representative concentrations of ternary mixture. The obtained results open up a new way of selecting the therapeutic concentrations for combined therapies, a path that considers one additional variable: eutecticity.

Metallaphotoredox-enabled deoxygenative arylation of alcohols.

Metal-catalysed cross-couplings are a mainstay of organic synthesis and are widely used for the formation of C-C bonds, particularly in the production of unsaturated scaffolds1. However, alkyl cross-couplings using native sp3-hybridized functional groups such as alcohols remain relatively underdeveloped2. In particular, a robust and general method for the direct deoxygenative coupling of alcohols would have major implications for the field of organic synthesis. A general method for the direct deoxygenative cross-coupling of free alcohols must overcome several challenges, most notably the in situ cleavage of strong C-O bonds3, but would allow access to the vast collection of commercially available, structurally diverse alcohols as coupling partners4. We report herein a metallaphotoredox-based cross-coupling platform in which free alcohols are activated in situ by N-heterocyclic carbene salts for carbon-carbon bond formation with aryl halide coupling partners. This method is mild, robust, selective and most importantly, capable of accommodating a wide range of primary, secondary and tertiary alcohols as well as pharmaceutically relevant aryl and heteroaryl bromides and chlorides. The power of the transformation has been demonstrated in a number of complex settings, including the late-stage functionalization of Taxol and a modular synthesis of Januvia, an antidiabetic medication. This technology represents a general strategy for the merger of in situ alcohol activation with transition metal catalysis.

Structure and Fate of Nanoparticles Designed for the Nasal Delivery of Poorly Soluble Drugs.

Nanoparticles are promising mediators to enable nasal systemic and brain delivery of active compounds. However, the possibility of reaching therapeutically relevant levels of exogenous molecules in the body is strongly reliant on the ability of the nanoparticles to overcome biological barriers. In this work, three paradigmatic nanoformulations vehiculating the poorly soluble model drug simvastatin were addressed: (i) hybrid lecithin/chitosan nanoparticles (LCNs), (ii) polymeric poly-ε-caprolactone nanocapsules stabilized with the nonionic surfactant polysorbate 80 (PCL_P80), and (iii) polymeric poly-ε-caprolactone nanocapsules stabilized with a polysaccharide-based surfactant, i.e., sodium caproyl hyaluronate (PCL_SCH). The three nanosystems were investigated for their physicochemical and structural properties and for their impact on the biopharmaceutical aspects critical for nasal and nose-to-brain delivery: biocompatibility, drug release, mucoadhesion, and permeation across the nasal mucosa. All three nanoformulations were highly reproducible, with small particle size (∼200 nm), narrow size distribution (polydispersity index (PI) < 0.2), and high drug encapsulation efficiency (>97%). Nanoparticle composition, surface charge, and internal structure (multilayered, core-shell or raspberry-like, as assessed by small-angle neutron scattering, SANS) were demonstrated to have an impact on both the drug-release profile and, strikingly, its behavior at the biological interface. The interaction with the mucus layer and the kinetics and extent of transport of the drug across the excised animal nasal epithelium were modulated by nanoparticle structure and surface. In fact, all of the produced nanoparticles improved simvastatin transport across the epithelial barrier of the nasal cavity as compared to a traditional formulation. Interestingly, however, the permeation enhancement was achieved via two distinct pathways: (a) enhanced mucoadhesion for hybrid LCN accompanied by fast mucosal permeation of the model drug, or (b) mucopenetration and an improved uptake and potential transport of whole PCL_P80 and PCL_SCH nanocapsules with delayed boost of permeation across the nasal mucosa. The correlation between nanoparticle structure and its biopharmaceutical properties appears to be a pivotal point for the development of novel platforms suitable for systemic and brain delivery of pharmaceutical compounds via intranasal administration.

In-situ cellulose-framework templates mediated monodispersed silver nanoparticles via facile UV-light photocatalytic activity for anti-microbial functionalization.

Cellulose is well known as a biocompatible material or natural reducing material. In this study, As an eco-friendly and facile method, we prepared monodispersed silver nanoparticles (AgNPs) in cellulose-framework through photocatalytic reaction. and we fabricated electrospun fiber scaffolds with excellent antibacterial properties and biocompatibility. UV-irradiation causes the electrical change of the cellulose-framework, thereby converting Ag ions into Ag particles. We applied a three-electrode system to confirm the phenomenon. Through STEM and EDS, it was found that the synthesized AgNPs were monodisperse in the nanofibers, and antibacterial activity was confirmed using gram-negative and gram-positive bacteria. In addition, it was suggested that the gradual release of simvastatin contained in the nanofibers and excellent mineralization would be easy to apply to bone regeneration. Therefore, the manufactured composite electrospun fiber mat can be used not only in biomedical fields but also in various applications that need to prevent the accumulation of microorganisms.

Anti-inflammatory potential of simvastatin loaded nanoliposomes in 2D and 3D foam cell models.

Atherosclerosis is a multifactorial disease triggered and sustained by risk factors such as high cholesterol, high blood pressure and unhealthy lifestyle. Inflammation plays a pivotal role in atherosclerosis pathogenesis. In this study, we developed a simvastatin (STAT) loaded nanoliposomal formulation (LIPOSTAT) which can deliver the drug into atherosclerotic plaque, when administered intravenously. This formulation is easily prepared, stable, and biocompatible with minimal burst release for effective drug delivery. 2D and 3D in vitro models were examined towards anti-inflammatory effects of STAT, both free and in combination with liposomes. LIPOSTAT induced greater cholesterol efflux in the 2D foam cells and significantly reduced inflammation in both 2D and 3D models. LIPOSTAT alleviated inflammation by reducing the secretion of early and late phase pro-inflammatory cytokines, monocyte adherence marker, and lipid accumulation cytokines. Additionally, the 3D foam cell spheroid model is a convenient and practical approach in testing various anti-atherosclerotic drugs without the need for human tissue.

Preparation and characterization of poly (lactic-co-glycolic acid) nanofibers containing simvastatin coated with hyaluronic acid for using in periodontal tissue engineering.

Periodontal diseases can lead to soft tissue defects. Tissue engineering can provide functional replacements for damaged tissues. Recently, electrospun nanofibers have attracted great interest for tissue engineering and drug delivery applications. This has been revealed that statins exhibit positive impacts on the proliferation and regeneration of periodontal tissues. Electrospun simvastatin loaded poly (lactic-co-glycolic acid) (SIM-PLGA-NF) were prepared using electrospinning technique. Optimal conditions for preparation of SIM-PLGA-NF (PLGA concentration of 30 wt%, voltage of 15 kV, and flow rate of 1.5 ml h-1 ) were identified using a 23 factorial design. The optimized SIM-PLGA-NFs (diameter of 640.2 ± 32.5 nm and simvastatin entrapment efficacy of 99.6 ± 1.5%) were surface modified with 1% w/v hyaluronic acid solution (1%HA- SIM-PLGA-NF) to improve their compatibility with fibroblasts and potential application as a periodontal tissue engineering scaffold. HA-SIM-PLGA NFs were analyzed using SEM, FTIR, and XRD. 1%HA-SIM-PLGA-NF had uniform, bead-free and interwoven morphology, which is similar to the extracellular matrix. The mechanical performance of SIM-PLGA-NFs and release profile of simvastatin from these nanofibers have been also greatly improved after coating with HA. In vitro cellular tests showed that the proliferation, adhesion, and differentiation of fibroblast cells positively enhanced on the surface of 1%HA- SIM-PLGA-NF. These results demonstrate the potential application of 1%HA-SIM-PLGA-NFs as a scaffold for periodontal tissue engineering.