Trace multi-class organic explosives analysis in complex matrices enabled using LEGO®-inspired clickable 3D-printed solid phase extraction block arrays.

The development of a new, lower cost method for trace explosives recovery from complex samples is presented using miniaturised, click-together and leak-free 3D-printed solid phase extraction (SPE) blocks. For the first time, a large selection of ten commercially available 3D printing materials were comprehensively evaluated for practical, flexible and multiplexed SPE using stereolithography (SLA), PolyJet and fused deposition modelling (FDM) technologies. Miniaturised single-piece, connectable and leak-free block housings inspired by Lego® were 3D-printed in a methacrylate-based resin, which was found to be most stable under different aqueous/organic solvent and pH conditions, using a cost-effective benchtop SLA printer. Using a tapered SPE bed format, frit-free packing of multiple different commercially available sorbent particles was also possible. Coupled SPE blocks were then shown to offer efficient analyte enrichment and a potentially new approach to improve the stability of recovered analytes in the field when stored on the sorbent, rather than in wet swabs. Performance was measured using liquid chromatography-high resolution mass spectrometry and was better, or similar, to commercially available coupled SPE cartridges, with respect to recovery, precision, matrix effects, linearity and range, for a selection of 13 peroxides, nitramines, nitrate esters and nitroaromatics. Mean % recoveries from dried blood, oil residue and soil matrices were 79 ± 24%, 71 ± 16% and 76 ± 24%, respectively. Excellent detection limits between 60 fg for 3,5-dinitroaniline to 154 pg for nitroglycerin were also achieved across all matrices. To our knowledge, this represents the first application of 3D printing to SPE of so many organic compounds in complex samples. Its introduction into this forensic method offered a low-cost, 'on-demand' solution for selective extraction of explosives, enhanced flexibility for multiplexing/design alteration and potential application at-scene.

Detection of fuel-oxidizer explosives utilizing portable capillary electrophoresis with wipe-based sampling.

Portable analytical instrumentation that can provide an alarm indication for the presence of explosives and related components is critical for the identification of explosives-based hazards and threats. Many explosives incident reports involve an inorganic oxidizer-fuel mixture which can include pyrotechnics, fireworks, flash powders, black powders, black powder substitutes, and improvised or homemade explosives. A portable CE instrument with targeted analysis of common inorganic oxidizer ions, for example, chlorate, perchlorate, and nitrate, was used here as a rapid detection platform. Unlike frequently used gas-phase separation and detection instrumentation such as ion mobility spectrometry (IMS), an automated liquid extraction mechanism is required for CE separation using acetate paper sample collection wipes. Target inorganic oxidizers were inkjet-printed onto sample wipes to investigate instrument response relative to the collected analyte spatial distribution. Overall, analyte signal intensities increased with off-center sample deposition due to improved sample extraction from wipes and no change in response was observed for varied array distributions across wipes. The system demonstrated sub 200 ng detection limits for all target analytes, with further improvement when normalizing to an internal standard.

Bar adsorptive microextraction device coated with polyimide microsphere assembled by nanosheets combined with thermal desorption-gas chromatography for trace analysis of nitroaromatic explosives in environmental waters.

Polyimide (PI) microspheres assembled by nanosheets were used for bar adsorptive microextraction (BAµE) for the first time. The PI microsphere possessed self-organized hierarchical nanostructure, large specific surface area (170 m2/g) and good thermostability (up to 400 °C). The BAµE device was prepared by adhering the PI microspheres on a quartz bar with Kapton double sided tape. Trace nitroaromatic explosives in environmental waters were extracted by the BAµE device, desorbed by thermal desorption (TD), and analyzed by gas chromatography-mass spectrometry (GC-MS). The reproducibility of five BAµE devices prepared in parallel was less than 13.0% (expressed as relative standard deviation, RSD). The BAµE device could stand up to 30 extraction/desorption cycles without decrease of extraction efficiency. The results of method validation showed that the BAµE-TD/GC-MS method possessed wide linearity (0.05-50 µg/L or 0.05-20 µg/L), high correlation coefficients (> 0.9987), good precision (RSDs < 11.8%), low detection limits (0.005-0.013 µg/L) and high enrichment factors (528-1410). Relative recoveries were in the range of 72.2-122.6% with RSDs between 0.1% and 10.5% for real water samples. These results proved that the proposed method was a good choice for determination of organic pollutants in water samples.

Silicon nanowire arrays for the preconcentration and separation of trace explosives vapors.

Silicon nanowire (SiNW) arrays are demonstrated as a suitable platform for the preconcentration of trace nitroaromatic compounds and subsequent desorption via Joule heating of the array. Arrays are fabricated from Si wafers containing an epitaxially grown layer of low conductivity intrinsic Si sandwiched between layers of high conductivity p-type Si. Passage of current through the nanowires results in nanowire temperatures in excess of 200 °C during heating of the arrays as verified by using the temperature-dependent shift of the Si Raman band at ˜520 cm-1. Analyte vapor preconcentration and partial separation is achieved on the array at analyte concentrations nearly two orders-of-magnitude below saturated vapor concentrations at room temperature. The effects of desorption carrier gas flow rate and temperature on the ability to preconcentrate and resolve the analytes of interest are determined. 2,6-dinitrotoluene (2,6-DNT) and 2,4-dinitrotoluene (2,4-DNT) were detected at nominal vapor concentrations of 800 pptv with a 1 min sample time (1.1 ng nominal mass load) and trinitrotoluene (TNT) was detected at a nominal vapor concentration of 65 pptv with a 10 min sample time (1.1 ng nominal mass load).

Non-Isothermal Sublimation Kinetics of 2,4,6-Trinitrotoluene (TNT) Nanofilms.

Non-isothermal sublimation kinetics of low-volatile materials is more favorable over isothermal data when time is a crucial factor to be considered, especially in the subject of detecting explosives. In this article, we report on the in-situ measurements of the sublimation activation energy for 2,4,6-trinitrotoluene (TNT) continuous nanofilms in air using rising-temperature UV-Vis absorbance spectroscopy at different heating rates. The TNT films were prepared by the spin coating deposition technique. For the first time, the most widely used procedure to determine sublimation rates using thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) was followed in this work using UV-Vis absorbance spectroscopy. The sublimation kinetics were analyzed using three well-established calculating techniques. The non-isothermal based activation energy values using the Ozawa, Flynn⁻Wall, and Kissinger models were 105.9 ± 1.4 kJ mol-1, 102.1 ± 2.7 kJ mol-1, and 105.8 ± 1.6 kJ mol-1, respectively. The calculated activation energy agreed well with our previously reported isothermally-measured value for TNT nanofilms using UV-Vis absorbance spectroscopy. The results show that the well-established non-isothermal analytical techniques can be successfully applied at a nanoscale to determine sublimation kinetics using absorbance spectroscopy.

Rapid separation of post-blast explosive residues on glass electrophoresis microchips.

This study describes the development of an analytical methodology based on the use of microchip electrophoresis (ME) devices integrated with capacitively coupled contactless conductivity detection (C4 D) for the separation and detection of inorganic anions in post-blast explosive residues. The best separation condition was achieved using a running buffer composed of 35 mmol/L lactic acid, 10 mmol/L histidine and 0.070 mmol/L cetyl(trimethyl ammonium) bromide. For C4 D measurements, the highest sensitivity was obtained applying a 700 kHz sinusoidal wave with excitation voltage of 20 Vpp . The separation of Cl- , NO3- , NO2- , SO42- , ClO4- and ClO3- was performed within ca. 150 s with baseline resolution and efficiencies between 4.4 × 104 and 1.7 × 105 plates/m. The found limits of detection ranged between 2.5 and 9.5 µmol/L. Last, real samples of post-blast explosive residues were analyzed on the ME-C4 D devices obtaining successfully the determination of Cl- , NO3- and SO42- . The achieved concentration values varied between 12.8-72.5 mg/L for Cl- , 1.7-293.1 mg/L for NO3- and 1.3-201.3 mg/L for SO42- . The data obtained using ME-C4 D devices were in good agreement with the concentrations found by ion chromatography. The approach reported herein has provided short analysis time, instrumental simplicity, good analytical performance and low cost. Furthermore, the ME-C4 D devices emerge as a powerful and portable analytical platform for on-site analysis demonstrating to be a promising tool for the crime scene investigation.

Trace detection of some nitro-explosives using thermal mediated immunochemical defragmented method.

A new immunoassay format using thermally induced defragmentation of some nitro-explosives with a high degree of selectivity is reported. Specific antibodies against three widely used explosives, 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and pentaerythritol tetranitrate (PETN) were generated by designing suitable haptens using geometry optimization modules. These in-house generated antibodies were used in a newly developed thermal mediated immunochemical biosensing technique which involves the binding of specific antibodies to respective nitro-explosives on a microtiter strip, resulting in the formation of specific immunocomplex. Heating the specific immuno-complex formed on microtiter wells resulted in thermal lysis of nitro-explosives to generate nitrite ions. These ions react with Griess reagent to form a colored chromophore which correlates the concentration of individual explosive in the sample. The present work fulfills the need for an improved explosive detecting system that is highly specific and capable of quickly determining the presence of nitrate containing explosives from a mixture pool.

A Portable Biosensor for 2,4-Dinitrotoluene Vapors.

Buried explosive material, e.g., landmines, represent a severe issue for human safety all over the world. Most explosives consist of environmentally hazardous chemicals like 2,4,6-trinitrotoluene (TNT), carcinogenic 2,4-dinitrotoluene (2,4-DNT) and related compounds. Vapors leaking from buried landmines offer a detection marker for landmines, presenting an option to detect landmines without relying on metal detection. 2,4-Dinitrotoluene (DNT), an impurity and byproduct of common TNT synthesis, is a feasible detection marker since it is extremely volatile. We report on the construction of a wireless, handy and cost effective 2,4-dinitrotoluene biosensor combining recombinant bioluminescent bacterial cells and a compact, portable optical detection device. This biosensor could serve as a potential alternative to the current detection technique. The influence of temperature, oxygen and different immobilization procedures on bioluminescence were tested. Oxygen penetration depth in agarose gels was investigated, and showed that aeration with molecular oxygen is necessary to maintain bioluminescence activity at higher cell densities. Bioluminescence was low even at high cell densities and 2,4-DNT concentrations, hence optimization of different prototypes was carried out regarding radiation surface of the gels used for immobilization. These findings were applied to sensor construction, and 50 ppb gaseous 2,4-DNT was successfully detected.

Computer simulation for the study of the liquid chromatographic separation of explosive molecules.

The application of high performance liquid chromatography (HPLC) to separate explosive chemicals was investigated by molecular dynamics (MD) simulations. The explosive ingredients including NG, RDX, HMX and TNT were assigned as solutes, while methanol (CH3OH) and acetonitrile (CH3CN) were assigned as solvents in the solution system. The polymeric-molecular siloxanes (SiC8) and poly-1,2-methylenedioxy-4-propenyl benzene (PISAF) compounds were treated as stationary phase in the simulation. The simulation results showed that the different species of explosive ingredients were separated successfully in the solutions by each of the constructed stationary phase of SiC8 and PISAF after a total simulation time of 12.0 ps approximately, which were consistent with the experimental analysis of HPLC spectra. The origin for the separation was found due to the electrostatic interactions between polymer and explosives.

Ferrofluid of magnetic clay and menthol based deep eutectic solvent: Application in directly suspended droplet microextraction for enrichment of some emerging contaminant explosives in water and soil samples.

In this work, for the first time, ferrofluid of magnetic montmorillonite nanoclay and deep eutectic solvent was prepared and coupled with directly suspended droplet microextraction. Incorporation of ferrofluid in a miniaturized sample preparation technique resulted in achieving high extraction efficiency while developing a green analytical method. The prepared ferrofluid has strong sorbing properties and hydrophobic characteristics. In this method, a micro-droplet of ferrofluid was suspended into the vortex of a stirring aqueous solution and after completing the extraction process, was easily separated from the solution by a magnetic rod without any operational problems. The predominant experimental variables affecting the extraction efficiency of explosives were evaluated. Under optimal conditions, the limits of detection were in the range 0.22-0.91 µg L-1. The enrichment factors were between 23 and 93 and the relative standard deviations were <10%. The relative recoveries were ranged from 88 to 104%. This method was successfully applied for the extraction and preconcentration of explosives in water and soil samples, followed their determination by high performance liquid chromatography with ultraviolet detection (HPLC-UV).

Aerobic Transformation of 2,4-Dinitrotoluene by Escherichia coli and Its Implications for the Detection of Trace Explosives.

DNT (2,4-dinitrotoluene), a volatile impurity in military-grade 2,4,6-trinitrotoluene (TNT)-based explosives, is a potential tracer for the detection of buried landmines and other explosive devices. We have previously described an Escherichia coli bioreporter strain engineered to detect traces of DNT and have demonstrated that the yqjF gene promoter, the sensing element of this bioreporter, is induced not by DNT but by at least one of its transformation products. In the present study, we have characterized the initial stages of DNT biotransformation in E. coli, have identified the key metabolic products in this reductive pathway, and demonstrate that the main DNT metabolite that induces yqjF is 2,4,5-trihydroxytoluene. We further show that E. coli cannot utilize DNT as a sole carbon or nitrogen source and propose that this compound is metabolized in order to neutralize its toxicity to the cells.IMPORTANCE The information provided in this article sheds new light both on the microbial biodegradability of nitroaromatic compounds and on the metabolic capabilities of E. coli By doing so, it also clarifies the pathway leading to the previously unexplained induction of the E. coli yqjF gene by 2,4-dinitrotoluene, an impurity that accompanies 2,4,6-trinitrotoluene (TNT)-based explosives. Our improved understanding of these processes will serve to molecularly enhance the performance of a previously described microbial bioreporter of buried landmines and other explosive devices, in which the yqjF gene promoter serves as the sensing element.

Detection of Contact Traces of Powdery Substances.

The current practice in securing the contact traces of chemical substances taken from clothes belonging to a person suspected of manual handling explosives is focused on pockets and cuffs. The outerwear worn by people who had contact with fluorescent powders that simulate explosives and drugs was the subject of this study. Clothes were first exposed to the test substance for a period of time and then analyzed by fluorescence methods to determine the location of the highest quantity of traces. The results obtained from the study confirm that the areas with the highest concentration of powdery traces are different from those suggested by current forensic practice. They appear to be promising for a more efficient identification of the suspects involved in illegal manufacturing of drugs of abuse or explosives. Moreover, they may be helpful for developing the methodology for handling the evidence material in the forensic clothing examination process.

A two-stage extraction procedure for insensitive munition (IM) explosive compounds in soils.

The Department of Defense (DoD) is developing a new category of insensitive munitions (IMs) that are more resistant to detonation or promulgation from external stimuli than traditional munition formulations. The new explosive constituent compounds are 2,4-dinitroanisole (DNAN), nitroguanidine (NQ), and nitrotriazolone (NTO). The production and use of IM formulations may result in interaction of IM component compounds with soil. The chemical properties of these IM compounds present unique challenges for extraction from environmental matrices such as soil. A two-stage extraction procedure was developed and tested using several soil types amended with known concentrations of IM compounds. This procedure incorporates both an acidified phase and an organic phase to account for the chemical properties of the IM compounds. The method detection limits (MDLs) for all IM compounds in all soil types were <5 mg/kg and met non-regulatory risk-based Regional Screening Level (RSL) criteria for soil proposed by the U.S. Army Public Health Center. At defined environmentally relevant concentrations, the average recovery of each IM compound in each soil type was consistent and greater than 85%. The two-stage extraction method decreased the influence of soil composition on IM compound recovery. UV analysis of NTO established an isosbestic point based on varied pH at a detection wavelength of 341 nm. The two-stage soil extraction method is equally effective for traditional munition compounds, a potentially important point when examining soils exposed to both traditional and insensitive munitions.

MEKC-UV as an effective tool for the separation and identification of explosives, high explosives, and their degradation products in environmental samples.

MEKC has been used in conjunction with UV detection for identification and quantitation of high explosives in environmental samples. To ensure the compatibility of the technique with ESI-MS, perfluorooctanoic acid (PFOA), a volatile micelle, was used. Separation of EPA Method 8330 Mixes A and B using various concentrations of the micelle showed that the 80 mM solution of PFOA was the optimum concentration for the separation of the explosives. MEKC analysis of explosives with ESI-MS under optimum micelle concentration provided excellent results indicating the compatibility of the method with ESI-MS. Finally, the MEKC-UV method was applied to the detection and quantitation of explosives in various environmental samples including water, sand, and soil. The results demonstrate that the MEKC method described herein is a viable technique for detection of explosives in environmental samples using UV detection, while maintaining the compatibility of the technique with MS detection without any modification to the separation method, if laboratories decided to pursue this route in the future.

Techniques that acquire donor profiling information from fingermarks - A review.

Fingermarks are among the most important types of evidence that can be encountered at the scene of a crime since the unique ridge pattern of a fingerprint can be used for individualization. But fingermarks contain more than the characteristic pattern of ridges and furrows, they are composed of a wide variety of different components that originate from endogenous and exogenous sources. The chemical composition can be used to obtain additional information from the donor of the fingermark, which in turn can be used to create a donor profile. Donor profiling can serve at least two purposes i) to enhance the evidential value of fingermarks and ii) to provide valuable tactical information during the crime scene investigation. Retrieving this additional information is not limited to fingermarks that have been used for individualization, but can also be applied on partial and/or distorted fingermarks. In this review we have summarized the types of information that can be obtained from fingermarks. Additionally, an overview is given of the techniques that are available addressing their unique characteristics and limitations. We expect that in the nearby future, donor profiling from contact traces, including fingermarks will be possible.

Monte Carlo Simulations for the Detection of Buried Objects Using Single Sided Backscattered Radiation.

BACKGROUND: Detection of buried improvised explosive devices (IEDs) is a delicate task, leading to a need to develop sensitive stand-off detection technology. The shape, composition and size of the IEDs can be expected to be revised over time in an effort to overcome increasingly sophisticated detection methods. As an example, for the most part, landmines are found through metal detection which has led to increasing use of non-ferrous materials such as wood or plastic containers for chemical based explosives being developed. METHODOLOGY: Monte Carlo simulations have been undertaken considering three different commercially available detector materials (hyperpure-Ge (HPGe), lanthanum(III) bromide (LaBr) and thallium activated sodium iodide (NaI(Tl)), applied at a stand-off distance of 50 cm from the surface and burial depths of 0, 5 and 10 cm, with sand as the obfuscating medium. Target materials representing medium density wood and mild steel have been considered. Each detector has been modelled as a 10 cm thick cylinder with a 20 cm diameter. PRINCIPAL FINDINGS: It appears that HPGe represents the most promising detector for this application. Although it was not the highest density material studied, its excellent energy resolving capability leads to the highest quality spectra from which detection decisions can be inferred. CONCLUSIONS: The simulation work undertaken here suggests that a vehicle-born threat detection system could be envisaged using a single betatron and a series of detectors operating in parallel observing the space directly in front of the vehicle path. Furthermore, results show that non-ferrous materials such as wood can be effectively discerned in such remote-operated detection system, with the potential to apply a signature analysis template matching technique for real-time analysis of such data.

Graphene oxide-based optical biosensor functionalized with peptides for explosive detection.

A label-free optical biosensor was constructed with biofunctionalized graphene oxide (GO) for specific detection of 2,4,6-trinitrotoluene (TNT). By chemically binding TNT-specific peptides with GO, the biosensor gained unique optoelectronic properties and high biological sensitivity, with transducing bimolecular bonding into optical signals. Through UV absorption detection, increasing absorbance responses could be observed in presence of TNT at different concentrations, as low as 4.40×10(-9) mM, and showed dose-dependence and stable behavior. Specific responses of the biosensor were verified with the corporation of 2,6-dinitrotoluene (DNT), which had similar molecular structure to TNT. Thus, with high sensitivity and selectivity, the biosensor provided a convenient approach for detection of explosives as miniaturizing and integrating devices.

Preparation of magnetic TNT-imprinted polymer nanoparticles and their accumulation onto magnetic carbon paste electrode for TNT determination.

In this study, the TNT-imprinted polymer shell was created on nano-sized Fe3O4 cores in order to construct the nano-sized magnetic molecularly imprinted polymer (nano-MMIP). For this purpose, the surface of the synthesized magnetic nanoparticles was modified with methacrylic acid. The modified particles were then utilized as the core on which the TNT-imprinted polymeric shell was synthesized. The synthesized materials were then characterized by scanning electron microscopy, FT-IR and thermal gravimetric analysis (TGA). The resulting nano-MMIP particles were suspended in TNT solution and then collected on the surface of a carbon paste electrode via a permanent magnet, situated within the CP electrode. The extracted TNT was analyzed on the CP electrode by applying square wave voltammetry (SWV). It was found that the oxidative signal of TNT is much favorable for TNT detection on the resulting magnetic carbon paste electrode. The electrode with nano-MMIP showed distinctly higher signal to TNT, compared to that containing magnetic non-imprinted polymer (MNIP) nanoparticles. All parameters influencing the method performance including extraction pH, extraction time and sorbent amount were evaluated and optimized. The developed method showed a dynamic linear concentration range of 1.0-130.0 nM for TNT measurement. The detection limit of the method was calculated to be 0.5 nM. The method showed appropriate capability for TNT analysis in real water samples.

In situ vadose zone bioremediation.

Contamination of the vadose zone with various pollutants is a world-wide problem, and often technical or economic constraints impose remediation without excavation. In situ bioremediation in the vadose zone by bioventing has become a standard remediation technology for light spilled petroleum products. In this review, focus is given on new in situ bioremediation strategies in the vadose zone targeting a variety of other pollutants such as perchlorate, nitrate, uranium, chromium, halogenated solvents, explosives and pesticides. The techniques for biostimulation of either oxidative or reductive degradation pathways are presented, and biotransformations to immobile pollutants are discussed in cases of non-degradable pollutants. Furthermore, research on natural attenuation in the vadose zone is presented.

Screen-printed electrode-based electrochemical detector coupled with in-situ ionic-liquid-assisted dispersive liquid-liquid microextraction for determination of 2,4,6-trinitrotoluene.

A novel method is reported, whereby screen-printed electrodes (SPELs) are combined with dispersive liquid-liquid microextraction. In-situ ionic liquid (IL) formation was used as an extractant phase in the microextraction technique and proved to be a simple, fast and inexpensive analytical method. This approach uses miniaturized systems both in sample preparation and in the detection stage, helping to develop environmentally friendly analytical methods and portable devices to enable rapid and onsite measurement. The microextraction method is based on a simple metathesis reaction, in which a water-immiscible IL (1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [Hmim][NTf2]) is formed from a water-miscible IL (1-hexyl-3-methylimidazolium chloride, [Hmim][Cl]) and an ion-exchange reagent (lithium bis[(trifluoromethyl)sulfonyl]imide, LiNTf2) in sample solutions. The explosive 2,4,6-trinitrotoluene (TNT) was used as a model analyte to develop the method. The electrochemical behavior of TNT in [Hmim][NTf2] has been studied in SPELs. The extraction method was first optimized by use of a two-step multivariate optimization strategy, using Plackett-Burman and central composite designs. The method was then evaluated under optimum conditions and a good level of linearity was obtained, with a correlation coefficient of 0.9990. Limits of detection and quantification were 7 µg L(-1) and 9 µg L(-1), respectively. The repeatability of the proposed method was evaluated at two different spiking levels (20 and 50 µg L(-1)), and coefficients of variation of 7 % and 5 % (n = 5) were obtained. Tap water and industrial wastewater were selected as real-world water samples to assess the applicability of the method.