RESUMO
Nitrated-pyrazole-based energetic compounds have attracted wide publicity in the field of energetic materials (EMs) due to their high heat of formation, high density, tailored thermal stability, and detonation performance. Many nitrated-pyrazole-based energetic compounds have been developed to meet the increasing demands of high power, low sensitivity, and eco-friendly environment, and they have good applications in explosives, propellants, and pyrotechnics. Continuous and growing efforts have been committed to promote the rapid development of nitrated-pyrazole-based EMs in the last decade, especially through large amounts of Chinese research. Some of the ultimate aims of nitrated-pyrazole-based materials are to develop potential candidates of castable explosives, explore novel insensitive high energy materials, search for low cost synthesis strategies, high efficiency, and green environmental protection, and further widen the applications of EMs. This review article aims to present the recent processes in the synthesis and physical and explosive performances of the nitrated-pyrazole-based Ems, including monopyrazoles with nitro, bispyrazoles with nitro, nitropyrazolo[4,3-c]pyrazoles, and their derivatives, and to comb the development trend of these compounds. This review intends to prompt fresh concepts for designing prominent high-performance nitropyrazole-based EMs.
Assuntos
Nitratos/química , Nitrocompostos/química , Pirazóis/química , Substâncias Explosivas/síntese química , Substâncias Explosivas/química , Nitratos/síntese química , Nitrocompostos/síntese química , Pirazóis/síntese química , TermodinâmicaRESUMO
In the fields of Security and Defense, explosive traces must be analyzed at the sites of the terrorist events. The persistence on surfaces of these traces depends on the sublimation processes and the interactions with the surfaces. This study presents evidence that the sublimation process of these traces on stainless steel (SS) surfaces is very different than in bulk quantities. The enthalpies of sublimation of traces of four highly energetic materials: triacetone triperoxide (TATP), 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT), and 1,3,5- trinitrohexahydro-s-triazine (RDX) deposited on SS substrates were determined by optical fiber coupled-grazing angle probe Fourier Transform Infrared (FTIR) Spectroscopy. These were compared with enthalpies of sublimation determined by thermal gravimetric analysis for bulk amounts and differences between them were found. The sublimation enthalpy of RDX was very different for traces than for bulk quantities, attributed to two main factors. First, the beta-RDX phase was present at trace levels, unlike the case of bulk amounts which consisted only of the alpha-RDX phase. Second, an interaction between the RDX and SS was found. This interaction energy was determined using grazing angle FTIR microscopy. In the case of DNT and TNT, bulk and traces enthalpies were statistically similar, but it is evidenced that at the level of traces a metastable phase was observed. Finally, for TATP the enthalpies were statistically identical, but a non-linear behavior and a change of heat capacity values different from zero was found for both trace and bulk phases.
Assuntos
Substâncias Explosivas/química , Modelos Químicos , Algoritmos , Substâncias Explosivas/síntese química , Espectroscopia de Infravermelho com Transformada de Fourier , Termogravimetria , Difração de Raios XRESUMO
A series of nitro-imidazole derivatives were designed by replacing hydrogen atoms on imidazole ring with nitro group one by one. In order to investigate the thermodynamic stability, heat of formation (HOF), and bond dissociation energy (BDE) are calculated at the B3PW91/6-311+G(d,p) level. In order to investigate the impact sensitivity and detonation property, the drop height (H50), free space per molecule in crystal lattice (ΔV), detonation velocity (D), and detonation pressure (P) are calculated by using the empirical Kamlet-Jacobs (K-J) equation. The results show that the thermal stabilities of title molecules are determined by whether nitro group is associated to 1-position or not and accompanied with the steric hindrance between nitro groups and the charge population on the carbon atoms of imidazole ring. The excellent impact sensitivity and detonation performance of title molecules are also evaluated. On the consideration both of stability and detonation characters, 2,4,5-trinitro-1H-imidazole (D = 8.98 km/s, P = 36.70 GPa) is screened out as the potential high-energy-density molecule for further research.
Assuntos
Substâncias Explosivas/química , Hidrogênio/química , Nitrocompostos/química , Nitroimidazóis/química , Substâncias Explosivas/síntese química , Nitroimidazóis/síntese química , Teoria Quântica , Relação Estrutura-Atividade , Temperatura , TermodinâmicaRESUMO
Biohazards and chemical hazards as well as radioactive hazards have always been a threat to human health. The search for solutions to these problems is an ongoing worldwide effort. In order to control biohazards by chemical methods, a synthetically useful fused tricyclic iodine-rich compound, 2,6-diiodo-3,5-dinitro-4,9-dihydrodipyrazolo [1,5- a:5',1'- d][1,3,5]triazine (5), with good detonation performance was synthesized, characterized, and its properties determined. This compound which acts as an agent defeat weapon has been shown to destroy certain microorganisms effectively by releasing iodine after undergoing decomposition or combustion. The small iodine residues remaining will not be deleterious to human life after 1 month.
Assuntos
Desinfetantes/farmacologia , Substâncias Explosivas/farmacologia , Iodo/química , Triazinas/farmacologia , Desinfetantes/síntese química , Desinfetantes/química , Escherichia coli/efeitos dos fármacos , Substâncias Explosivas/síntese química , Substâncias Explosivas/química , Calefação , Staphylococcus aureus/efeitos dos fármacos , Triazinas/síntese química , Triazinas/químicaRESUMO
Pyridine derivatives based on the addition of trinitromethyl functional groups were synthesized by the reaction of N2O4 with the corresponding pyridinecarboxaldoximes, then they were converted into dinitromethylide hydrazinium salts. These energetic compounds were fully characterized by IR and NMR spectroscopy, elemental analysis, differential scanning calorimetry (DSC), and X-ray crystallography. These pyridine derivatives have good densities, positive enthalpies of formation, and acceptable sensitivity values. Theoretical calculations carried out using Gaussian 03 and EXPLO5 programs demonstrated good to excellent detonation velocities and pressures. Each of these compounds is superior in performance to TNT, while 2,6-bis(trinitromethyl)pyridine (D = 8700 m·s-1, P = 33.2 GPa) shows comparable detonation performance to that of RDX, but its thermal stability is too low, making it inferior to RDX.
Assuntos
Substâncias Explosivas/síntese química , Piridinas/síntese química , Varredura Diferencial de Calorimetria/métodos , Simulação por Computador , Cristalografia por Raios X/métodos , Hidrazinas/química , Espectroscopia de Ressonância Magnética/métodos , Estrutura Molecular , Óxidos de Nitrogênio/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , TermodinâmicaRESUMO
High-energy metal-organic frameworks (MOFs) based on nitrogen-rich ligands are an emerging class of explosives, and density is one of the positive factors that can influence the performance of energetic materials. Thus, it is important to design and synthesize high-density energetic MOFs. In the present work, hydrothermal reactions of Cu(II) with the rigid polynitro heterocyclic ligands 5,5'-dinitro-2H,2'H-3,3'-bi-1,2,4-triazole (DNBT) and 5,5'-dinitro-3,3'-bis-1,2,4-triazole-1-diol (DNBTO) gave two high-density MOFs: [Cu(DNBT)(ATRZ)3]n (1) and [Cu(DNBTO)(ATRZ)2(H2O)2]n (2), where ATRZ represents 4,4'-azo-1,2,4-triazole. The structures were characterized by infrared spectroscopy, elemental analysis, ultraviolet-visible (UV) absorption spectroscopy and single-crystal X-ray diffraction. Their thermal stabilities were also determined by thermogravimetric/differential scanning calorimetry analysis (TG/DSC). The results revealed that complex 1 has a two-dimensional porous framework that possesses the most stable chair conformations (like cyclohexane), whereas complex 2 has a one-dimensional polymeric structure. Compared with previously reported MOFs based on copper ions, the complexes have higher density (ρ = 1.93 g cm-3 for complex 1 and ρ = 1.96 g cm-3 for complex 2) and high thermal stability (decomposition temperatures of 323 °C for complex 1 and 333.3 °C for complex 2), especially because of the introduction of an N-O bond in complex 2. We anticipate that these two complexes would be potential high-energy density materials.
Assuntos
Cobre/química , Substâncias Explosivas/síntese química , Estruturas Metalorgânicas/síntese química , Triazóis/síntese química , Varredura Diferencial de Calorimetria , Cristalografia por Raios X , Substâncias Explosivas/química , Estruturas Metalorgânicas/química , Modelos Moleculares , Estrutura Molecular , Teoria Quântica , Espectrometria de Fluorescência , Triazóis/química , Difração de Raios XRESUMO
Developmental testing of high explosives for military applications involves small-scale formulation, safety testing, and finally detonation performance tests to verify theoretical calculations. small-scale For newly developed formulations, the process begins with small-scale mixes, thermal testing, and impact and friction sensitivity. Only then do subsequent larger scale formulations proceed to detonation testing, which will be covered in this paper. Recent advances in characterization techniques have led to unparalleled precision in the characterization of early-time evolution of detonations. The new technique of photo-Doppler velocimetry (PDV) for the measurement of detonation pressure and velocity will be shared and compared with traditional fiber-optic detonation velocity and plate-dent calculation of detonation pressure. In particular, the role of aluminum in explosive formulations will be discussed. Recent developments led to the development of explosive formulations that result in reaction of aluminum very early in the detonation product expansion. This enhanced reaction leads to changes in the detonation velocity and pressure due to reaction of the aluminum with oxygen in the expanding gas products.
Assuntos
Explosões , Substâncias Explosivas/síntese química , Alumínio/química , Substâncias Explosivas/química , Teste de Materiais , Oxirredução , Oxigênio/química , Pressão , TermodinâmicaRESUMO
Complexes of 3-amino-6-(3,5-dimethylpyrazole)tetrazine) (NH2TzDMP, 1) and 3-(3,3'-dinitroazetidine)-6-(3,5-dimethylpyrazole)tetrazine) (DNAZTzDMP, 2) with first row transition metal centers were synthesized. Reactions of Fe(II)(H2O)6(BF4)2 and Fe(NO3)3·9H2O with 1 and 2 both led to complexes of the form [(RTzDMP)3Fe]X2 (X = BF4, R = NH2 (3), DNAZ (4); X = NO3, R = NH2 (5), DNAZ (6)), which showed intense MLCT bands in the visible region of the spectrum. Ligands 1 and 2 also reacted with Cu(II)(NO3)2·5/2H2O to form [(RTzDMP)2Cu(NO3)][NO3] (R = NH2 (7), DNAZ (8)) in addition to reacting with Cu(I)(CH3CN)4(PF6) to form [(RTzDMP)2Cu][PF6] (R = NH2 (9), DNAZ (10)). Lastly reactions of 1 and 2 with Co(NO3)2·6H2O and Ni(NO3)2·6H2O led to [(NH2TzDMP)2Co(H2O) (NO3)][NO3] (11), [(DNAZTzDMP)2Co(H2O)2][NO3]2 (12), [(NH2TzDMP)3Ni][NO3]2 (13), and [(DNAZTzDMP)2Ni(H2O)2][NO3]2 (14). The complexes display rich electrochemical and photophysical properties that are unaffected by derivation with explosive groups.
Assuntos
Substâncias Explosivas/química , Fenômenos Ópticos , Compostos Organometálicos/química , Compostos Organometálicos/síntese química , Pirazóis/química , Elementos de Transição/química , Cristalografia por Raios X , Estabilidade de Medicamentos , Eletroquímica , Substâncias Explosivas/síntese química , Ligantes , Fenômenos Mecânicos , Modelos Moleculares , Conformação Molecular , TemperaturaRESUMO
The application of hypergolic ionic liquids as propellant fuels is a newly emerging area in the fields of chemistry and propulsion science. Herein, a new class of [imidazolyl-amine-BH2](+)-cation-based ionic liquids, which included fuel-rich anions, such as dicyanamide (N(CN)2(-)) and cyanoborohydride (BH3CN(-)) anions, were synthesized and characterized. As expected, all of the ionic liquids exhibited spontaneous combustion upon contact with the oxidizer 100 % HNO3. The densities of these ionic liquids varied from 0.99-1.12â g cm(-3), and the heats of formation, predicted based on Gaussianâ 09 calculations, were between -707.7 and 241.8â kJ mol(-1). Among them, the salt of compound 5, that is, (1-allyl-1H-imidazole-3-yl)-(trimethylamine)-dihydroboronium dicyanamide, exhibited the lowest viscosity (168 MPa s), good thermal properties (Tg <-70 °C, Td >130 °C), and the shortest ignition-delay time (18â ms) with 100 % HNO3. These ionic fuels, as "green" replacements for toxic hydrazine-derivatives, may have potential applications as bipropellant formulations.
Assuntos
Aminas/química , Hidrazinas/química , Imidazóis/química , Líquidos Iônicos/química , Ânions/química , Cátions/química , Substâncias Explosivas/síntese química , Substâncias Explosivas/química , Modelos Teóricos , ViscosidadeRESUMO
The derivatives of 1,2,3,4-tetrazine may be promising candidates for high-energy density compounds and are receiving more and more attentions. In this study, a new derivative 6-amino-7-nitropyrazino[2,3-e][1,2,3,4]tetrazine 1,3,5-trioxide (ANPTTO) has been designed. The geometrical structure and IR spectrum in the gas phase were studied at the B3LYP/6-31G* level of density functional theory (DFT). The crystal structure was predicted by molecular mechanics method and refined by the GGA/BOP function of periodic DFT with the basis set of TNP. The gas phase enthalpy of formation was calculated by the homodesmotic reaction method. The enthalpy of sublimation and solid phase enthalpy of formation were also predicted. The detonation properties were estimated with the Kamlet-Jacobs equations based on the predicted density and enthalpy of formation in solid state. The available free space in the lattice and resonance energy were calculated to evaluate its stability. ANPTTO has a high stability and is a promising high energetic component with the density >2 g · cm(-3), detonation velocity >9000 m · s(-1), and detonation pressure >40 GPa. A synthetic route was proposed to provide a consideration for further study.
Assuntos
Simulação por Computador , Explosões , Substâncias Explosivas/química , Modelos Químicos , Modelos Moleculares , Nitrocompostos/química , Pirazinas/química , Cristalização , Transferência de Energia , Substâncias Explosivas/síntese química , Gases , Estrutura Molecular , Nitrocompostos/síntese química , Pressão , Pirazinas/síntese química , Espectrofotometria Infravermelho , Relação Estrutura-Atividade , TemperaturaRESUMO
In this work, 3-nitro-1H-1,2,4-triazole (1) and 3,5-dinitro-1H-pyrazole (2) were C-aminated and N-aminated using different amination agents, yielding their respective C-amino and N-amino products. All compounds were fully characterized by NMR (1H, 13C, 15N), IR spectroscopy, differential scanning calorimetry (DSC). X-ray crystallographic measurements were performed and delivered insight into structural characteristics as well as inter- and intramolecular interactions of the products. Their impact sensitivities were measured by using standard BAM fallhammer techniques and their explosive performances were computed using the EXPLO 5.05 program. A comparative study on the influence of those different amino substituents on the structural and energetic properties (such as density, stability, heat of formation, detonation performance) is presented. The results showed that the incorporation of an N-amino group into a nitroazole ring can improve nitrogen content, heat of formation and impact sensitivity, while the introduction of a C-amino group can enhance density, detonation velocity and pressure. The potential of N-amino and C-amino moieties for the design of next generation energetic materials is explored.
Assuntos
Substâncias Explosivas/síntese química , Pirazóis/síntese química , Triazóis/síntese química , Aminação , Cristalografia por Raios X , Hidrazinas/química , Espectroscopia de Ressonância Magnética , Modelos Moleculares , Conformação Molecular , TermodinâmicaRESUMO
High-performance explosives: Tris(triazolo)benzene was synthesized and converted to its trinitro and trichloro derivatives (see scheme; R=NO(2), Cl). The heats of formation of this "high-nitrogen" compounds were calculated and combined with experimentally determined densities to determine detonation pressures and velocities. They exhibit high density, good thermal stability, high heats of formation, and moderate to good detonation properties.
Assuntos
Derivados de Benzeno/síntese química , Substâncias Explosivas/síntese química , Triazóis/síntese química , Derivados de Benzeno/química , Cristalografia por Raios X , Substâncias Explosivas/química , Temperatura Alta , Modelos Moleculares , Triazóis/químicaRESUMO
The synthesis of 5-nitro-2-nitratomethyl-1,2,3,4-tetrazole (4) and its full characterization are given here. Compound 4 was synthesized through the nitration of 5-nitro-2-hydroxymethyl-tetrazole (3) with fuming nitric acid and acetic anhydride and its structure was characterized by MS, FT-IR, ¹H-NMR and ¹³C-NMR techniques. The crystal structure of 4 was determined by X-ray single crystal diffraction analysis. The compound belongs to the orthorhombic system with space group Pna2(1), and its crystal parameters were a = 2.121(8) nm, b = 0.5281(19) nm, c = 0.6246(2) nm, Z = 4, V = 0.6995(4) nm³, Dc = 1.805 g/cm³, F(000) = 384, µ = 0.174 mm⻹. A theoretical study of 4 has been performed, using quantum computational density functional theory (B3LYP methods) with 6-31G* basis sets as implemented in the Gaussian 03 program suite. The obtained heat of formation (HOF) for 4 was 228.07 kJ·mol⻹, the detonation pressure (P) values calculated for 4 was 37.92 GPa, the detonation velocity (D) can reach 9260 m·s⻹, and the oxygen balance was zero (Q), making 4 a competitive energetic compound.
Assuntos
Anidridos Acéticos/química , Substâncias Explosivas/síntese química , Ácido Nítrico/química , Nitrocompostos/síntese química , Nitrogênio/química , Oxigênio/química , Tetrazóis/química , Cristalografia por Raios X , Modelos Moleculares , Teoria Quântica , Espectroscopia de Infravermelho com Transformada de Fourier , Tetrazóis/síntese química , TermodinâmicaRESUMO
Cuprous oxide is firstly created on acidized sepiolite (AS) by a simple deposition method for photocatalytic degradation of the red water produced from 2,4,6-trinitrotoluene (TNT) manufacturing. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), ultraviolet-visible diffuse reflection absorptive spectroscopy (UV-vis/DRS), and Fourier transform infrared (FT-IR) spectroscopy are used to characterize the photocatalyst composites. Gas chromatography/mass spectrometry (GC/MS) is employed to determine the organic constituents in the red water. The results show that the cuprous oxide particles can be immobilized on the surface of the AS fibers and the structure of the AS is altered when cuprous oxide interacts with AS via chemical reactions besides physical adsorption. The AS improves the optical properties of cuprous oxide and red-shifts the band gap thereby enhancing the utilization of visible light. The Cu(2)O/AS composites demonstrate excellent photocatalytic performance in the degradation of red water. 87.0% of red water can be photocatalytically degraded by Cu(2)O/AS after illumined for 5h and a majority of organic components of red water except 1,3,5-trinitrobenzene were degraded according to GC-MS analysis.
Assuntos
Cobre/química , Substâncias Explosivas/síntese química , Resíduos Industriais , Silicatos de Magnésio/química , Trinitrotolueno/síntese química , Poluentes Químicos da Água/isolamento & purificação , Catálise , Microscopia Eletrônica de Varredura , Processos Fotoquímicos , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
Antibodies are a promising tool for the fast and selective trace detection of explosives. Unfortunately, the production of high-quality antibodies is not trivial and often expensive. Therefore, excellent antibodies are a rare and limiting resource in fields such as biosensing, environmental analysis, diagnostics, cancer therapy, and proteomics. Here, we report the synthesis, bioconjugation, and application of the structurally optimized hapten 6-(2,4,6-trinitro)-phenylhexanoic acid to improve the selectivity and sensitivity of antibodies for the detection of one of the most important explosives, trinitrotoluene. With a conjugate of bovine serum albumin and a highly purified N-hydroxy-succinimide (NHS)-activated hapten, two rabbits were immunized to obtain polyclonal antibodies. The immunization process was monitored by enzyme-linked immunosorbent assay to gain information about the progress of antibody titer and affinity. Finally, the polyclonal antibodies reached an affinity constant of (5.1 ± 0.6) × 10(9) l/mol (rabbit R1) and (2.3 ± 0.2) × 10(9) l/mol (rabbit R2). The respective assays show a minimum test midpoint (IC(50) value) of 0.1 ± 0.01 µg/l (R1) and 0.2 ± 0.02 µg/l (R2) and a working range of 0.005 to 150 µg/l (R1) and 0.007 to 200 µg/l (R2), which corresponds to more than four orders of magnitude for both. This is quite remarkable for a competitive immunoassay, which is often believed to have a narrow dynamic range. The limit of detection was calculated to 0.6 ng/l (R1) and 1.5 ng/l (R2), which is up to 100 times improvement in relation to the assay of Zeck et al. (1999) on the basis of a monoclonal antibody. The excellent selectivity of the polyclonal antibodies was comprehensively examined by determining the cross-reactivity to common explosives and other nitroaromatics including nitro musk components. The widely held belief that polyclonal antibodies generally display higher cross-reactivities than monoclonals could be disproved.
Assuntos
Anticorpos/imunologia , Especificidade de Anticorpos/imunologia , Desenho de Fármacos , Substâncias Explosivas/imunologia , Haptenos/química , Haptenos/imunologia , Trinitrotolueno/imunologia , Animais , Afinidade de Anticorpos/imunologia , Calibragem , Bovinos , Reações Cruzadas/imunologia , Substâncias Explosivas/síntese química , Substâncias Explosivas/química , Imunização , Nitrosação , Coelhos , Soroalbumina Bovina/imunologia , Titulometria , Trinitrotolueno/síntese química , Trinitrotolueno/químicaRESUMO
Two new nitramine compounds containing pyridine, 1,3,5,7-tetranitro-8-(nitromethyl) -4-imidazolino[4,5-b]4-imidazolino-[4,5-e]pyridine and its N-oxide 1,3,5,7-tetranitro-8- (nitromethyl)-4-imidazolino[4,5-b]4-imidazolino-[4,5-e]pyridine-4-ol were proposed. Density functional theory (DFT) has been employed to study the molecular geometries, electronic structures, infrared spectra, and thermodynamic properties at the B3LYP/6-31G* level. Their detonation performances evaluated using the Kamlet-Jacobs equations with the calculated densities and heats of formation are superior to those of HMX. The predicted densities of them were ca. 2 g cm(-3), detonation velocities were over 9 km s(-1), and detonation pressures were about 40 GPa, showing that they may be potential candidates of high energy density materials (HEDMs). The natural bond orbital analysis indicated that N-NO(2) bond is the trigger bond during thermolysis process. The stability of the title compounds is slightly lower than that of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12- hexaazaisowurtzitane (CL-20). The results of this study may provide basic information for the molecular design of new HEDMs.
Assuntos
Compostos de Anilina/química , Óxidos N-Cíclicos/química , Substâncias Explosivas/química , Nitrobenzenos/química , Nitroimidazóis/química , Piridinas/química , Óxidos N-Cíclicos/síntese química , Substâncias Explosivas/síntese química , Modelos Moleculares , Nitroimidazóis/síntese química , Piridinas/síntese química , TermodinâmicaRESUMO
In an attempt to find superior propellants, 2-diazo-4,6-dinitrophenol (DDNP) and its -NO(2), -NH(2), -CN, -NC, -ONO(2), and -NF(2) derivatives were studied at the B3LYP/6-311++G level of density functional theory (DFT). Sensitivity was evaluated using bond dissociation enthalpies (BDEs) and molecular surface electrostatic potentials. The C-NO(2) bond appears to be the trigger bond during the thermolysis process for these compounds, except for the -ONO(2) and -NF(2) derivatives. Electrostatic potential results show that electron-withdrawing substituents make the charge imbalance more anomalous, which may change the strength of the bond, especially the weakest trigger bond. Most of the DDNP derivatives have the impact sensitivities that are higher than that of DDNP, making them favorable for use as solid propellants in micro-rockets. The theoretical densities (ρ), heats of formation (HOFs), detonation energies (Q), detonation pressures (P), and detonation velocities (D) of the compounds were estimated. The effects of various substituent groups on ρ, HOF, Q, D, and P were investigated. Some derivatives exhibit perfect detonation properties. The calculated relative specific impulses (I (r,sp)) of all compounds except for -NH(2) derivatives were higher than that of DDNP, and also meet the requirements of propellants.
Assuntos
Dinitrofenóis/química , Substâncias Explosivas/química , Substâncias Explosivas/síntese química , Dinitrofenóis/síntese química , Modelos Moleculares , Estrutura Molecular , Teoria Quântica , Eletricidade Estática , Propriedades de Superfície , TermodinâmicaAssuntos
Bioengenharia/métodos , Substâncias Explosivas , Química Verde/métodos , Ciência Militar/economia , Ciência Militar/métodos , Biologia Sintética/métodos , United States Department of Defense/economia , Bioengenharia/economia , Bioengenharia/ética , Armas Biológicas/ética , Substâncias Explosivas/síntese química , Substâncias Explosivas/economia , Química Verde/economia , Química Verde/ética , Ciência Militar/ética , Robótica/economia , Biologia Sintética/economia , Biologia Sintética/ética , Estados UnidosRESUMO
Two explosive triazides of phosphorus(V), OP(N(3))(3) and SP(N(3))(3), have been prepared as neat substances and structurally characterized. Both compounds can be handled in gas, liquid, and solid states in submillimolar quantities. The melting points of OP(N(3))(3) and SP(N(3))(3) are +22 and -30 °C, respectively. The two triazides have been characterized by IR (Ar matrix and gas phase) and Raman (solid) spectroscopies. Their single-crystal structures were obtained by X-ray diffraction and found to be significantly distorted from the predicted ideal C(3) symmetry because of intermolecular interactions. The spectroscopic and structural properties are discussed in combination with density functional theory calculations.
Assuntos
Azidas/síntese química , Química Inorgânica/métodos , Substâncias Explosivas/síntese química , Fósforo/química , Azidas/análise , Cristalografia por Raios X , Substâncias Explosivas/análise , Gases/química , Conformação Molecular , Teoria Quântica , Espectrofotometria Infravermelho , Análise Espectral Raman , TermodinâmicaRESUMO
This paper reviews the research and development work on 2,4,6-triamino-1,3,5-trinitrobenzene (TATB), and TATB-based formulations of other explosives. Syntheses including the production of nano-sized particles, analytical methods, thermophysical properties, performance, formulations, toxicity and safety of TATB are reviewed in this work.