RESUMO
To improve treatment compliance and reach sustained and controlled drug release in the colon, we developed a hollow mesoporous silica nano-suppository that responded to both pH and redox stimuli. Firstly, we prepared hollow mesoporous silica nanoparticles containing disulfide bonds (HMSN-SS) and loaded them with 5-ASA. Secondly, we modified the surface of HMSN-SS with polydopamine (PDA) and chitosan (CS) and molded the suppository, which we named 5-ASA@HMSN-SS-PDA-CS (5-ASA@HSPC). By administering 5-ASA@HSPC rectally, it acted directly on the affected area. CS helped the nanoparticles adhere to the colon's surface, while PDA dissociates from HMSN-SS due to protonation in the acidic environment of the ulcerative colon. The disulfide bonds were destroyed by the reducing environment of the colon, leading to a stable and slow release of encapsulated 5-ASA from the pores of HMSN. Finally, in vitro release experiments and in vivo pharmacokinetic and pharmacodynamic experiments had demonstrated that 5-ASA@HSPC exhibited a slow and steady action at the colonic site, with an excellent safety profile. This novel approach showed great potential in the treatment of ulcerative colitis.
Assuntos
Quitosana , Colite Ulcerativa , Liberação Controlada de Fármacos , Indóis , Mesalamina , Nanopartículas , Oxirredução , Polímeros , Dióxido de Silício , Colite Ulcerativa/tratamento farmacológico , Concentração de Íons de Hidrogênio , Quitosana/química , Quitosana/administração & dosagem , Animais , Nanopartículas/química , Nanopartículas/administração & dosagem , Mesalamina/química , Mesalamina/administração & dosagem , Mesalamina/farmacocinética , Dióxido de Silício/química , Dióxido de Silício/administração & dosagem , Polímeros/química , Polímeros/administração & dosagem , Indóis/administração & dosagem , Indóis/química , Indóis/farmacocinética , Supositórios/química , Masculino , Preparações de Ação Retardada/química , Preparações de Ação Retardada/administração & dosagem , Preparações de Ação Retardada/farmacocinética , Colo/efeitos dos fármacos , Colo/metabolismo , Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/química , Anti-Inflamatórios não Esteroides/farmacocinética , PorosidadeRESUMO
Two ways to deliver ultrasmall gold nanoparticles and gold-bovine serum albumin (BSA) nanoclusters to the colon were developed. First, oral administration is possible by incorporation into gelatin capsules that were coated with an enteric polymer. These permit the transfer across the stomach whose acidic environment damages many drugs. The enteric coating dissolves due to the neutral pH of the colon and releases the capsule's cargo. Second, rectal administration is possible by incorporation into hard-fat suppositories that melt in the colon and then release the nanocarriers. The feasibility of the two concepts was demonstrated by in-vitro release studies and cell culture studies that showed the easy redispersibility after dissolution of the respective transport system. This clears a pathway for therapeutic applications of drug-loaded nanoparticles to address colon diseases, such as chronic inflammation and cancer.
Assuntos
Colo/efeitos dos fármacos , Sistemas de Liberação de Medicamentos , Nanopartículas Metálicas/química , Polímeros/farmacologia , Administração Oral , Cápsulas/química , Cápsulas/farmacologia , Gelatina/química , Gelatina/farmacologia , Ouro/química , Ouro/farmacologia , Humanos , Polímeros/química , Soroalbumina Bovina/química , Soroalbumina Bovina/farmacologia , Supositórios/química , Supositórios/farmacologiaRESUMO
Rectal drug delivery is an effective alternative to oral and parenteral treatments. This route allows for both local and systemic drug therapy. Traditional rectal dosage formulations have historically been used for localised treatments, including laxatives, hemorrhoid therapy and antipyretics. However, this form of drug dosage often feels alien and uncomfortable to a patient, encouraging refusal. The limitations of conventional solid suppositories can be overcome by creating a thermosensitive liquid suppository. Unfortunately, there are currently only a few studies describing their use in therapy. However, recent trends indicate an increase in the development of this modern therapeutic system. This review introduces a novel rectal drug delivery system with the goal of summarising recent developments in thermosensitive liquid suppositories for analgesic, anticancer, antiemetic, antihypertensive, psychiatric, antiallergic, anaesthetic, antimalarial drugs and insulin. The report also presents the impact of various types of components and their concentration on the properties of this rectal dosage form. Further research into such formulations is certainly needed in order to meet the high demand for modern, efficient rectal gelling systems. Continued research and development in this field would undoubtedly further reveal the hidden potential of rectal drug delivery systems.
Assuntos
Administração Retal , Géis/administração & dosagem , Preparações Farmacêuticas/administração & dosagem , Supositórios/administração & dosagem , Resinas Acrílicas/química , Alginatos/química , Temperatura Corporal , Composição de Medicamentos , Sistemas de Liberação de Medicamentos , Previsões , Géis/química , Temperatura Alta , Humanos , Absorção Intestinal , Metilcelulose/química , Poloxâmero/química , Povidona/química , Supositórios/químicaRESUMO
BACKGROUND: Camptothecin is known for its potent anticancer activity. However, its optimal activity is reduced due to its low solubility and stability in biological media. OBJECTIVE: The aim of the present study is to design and characterize a Camptothecin (CPT) suppository formulation. METHODS: Rectal suppositories of camptothecin alone, encapsulated with Cyclodextrin (CD) and in the ternary system (CPT encapsulated with cyclodextrin and dispersed in Polyethylene Glycol (PEG) 6000) were prepared using various hydrophobic and hydrophilic polymeric bases as semi-synthetic glyceride (Suppocire® AM Pellets) and Polyethylene Glycols (PEGs) mixtures. Formulations were evaluated by various parameters like weight variation, drug content, hardness and liquefaction time. In vitro release study was performed in USP type I apparatus using phosphate buffer pH 7.2 as dissolution media. RESULTS: Suppositories were within the permissible range of all physical parameters. In vitro drug released from water soluble base (PEG) was greater than that from oil soluble base with ninety percent (90%) of drug dissolution. It was also established that drug release from various formulations was by diffusion mechanism, according to the Higuchi's equation. CONCLUSION: This new formulation offers a new approach to colorectal cancer treatment by offering an alternative and simple drug administration route.
Assuntos
Antineoplásicos/química , Camptotecina/química , Supositórios/química , Antineoplásicos/síntese química , Camptotecina/síntese química , Cápsulas/síntese química , Cápsulas/química , Composição de Medicamentos , Liberação Controlada de Fármacos , Humanos , Estrutura Molecular , Polietilenoglicóis/química , Supositórios/síntese químicaRESUMO
3D printing technology holds promise for application to personalized pharmaceuticals. Mold fabrication is a common technique in industrial 3D printing to produce objects with complex structures and could be used in new applications in pharmaceutical production. The aim of the current study is the fabrication of unique suppository shell molds composed of a water-soluble polymer (polyvinylalcohol) using a fused deposition modeling-type 3D printer so that hospital pharmacists can prepare tailored suppository formulations containing progesterone (a model drug for vaginal suppository formulations) in future clinical settings. Suppository formulations with holes in the shells were prepared. The drug release profiles related well to the positions of the holes (upper, middle, lower), the number of holes (0-2 holes), and the diameters of the holes (0-5â¯mm) in the suppositories. Matryoshka-type suppository formulations composed of 3D-printed multilayered shells were then prepared. The drug release profiles showed pulsed release, and the volumes of the inner/outer spaces in the suppository shells (1/1, 1/3) and the drug concentration (3/1, 1/1) were reflected in the observed drug release profiles. Our study indicates that a 3D printer can produce not only unique and complex suppository formulations, but also provides flexibility and expands possible applications for the development of tailored medicine.
Assuntos
Impressão Tridimensional , Supositórios/química , Preparações de Ação Retardada/química , Liberação Controlada de Fármacos , Polietilenoglicóis/química , Polímeros/química , Álcool de Polivinil/química , Progesterona/química , Solubilidade , Água/químicaRESUMO
The objective of this study is to prepare vaginal suppository containing chemotherapeutic agent and genetic material that can be applied locally for cervical cancer. Cervical cancer is one of the most life-threatening types of cancer among women and is generally resistant to chemotherapy. Paclitaxel has been selected as chemotherapeutic agent, and siRNA that inhibits the Bcl-2 oncogene has been selected as the genetic material for simultaneous vaginal delivery. For this purpose, three different solid lipid nanoparticles (SLNs) were prepared that include Bcl-2 siRNA and paclitaxel and paclitaxel/Bcl-2 siRNA combination separately, and these SLN formulations were dispersed in vaginal suppositories prepared with PEG 6000. First, the physicochemical properties of SLNs, their cytotoxicities on HeLa cell lines, and the transfection ability of siRNA-incorporated SLN on the cells have been examined. Afterward, the release of SLNs from the three different vaginal suppositories prepared has been determined via horizontal diffusion chamber system. The loaded amount to the SLNs and release amount from suppositories of paclitaxel have been determined via HPLC, whereas stability, loading, and release amount of siRNA has been determined via gel retardation system and UV spectrophotometer.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Nanopartículas/química , RNA Interferente Pequeno/genética , Neoplasias do Colo do Útero/terapia , Feminino , Células HeLa , Humanos , Lipídeos/química , Lipídeos/farmacologia , Nanopartículas/uso terapêutico , Paclitaxel/química , Paclitaxel/farmacologia , Proteínas Proto-Oncogênicas c-bcl-2/antagonistas & inibidores , Proteínas Proto-Oncogênicas c-bcl-2/genética , RNA Interferente Pequeno/química , RNA Interferente Pequeno/farmacologia , Supositórios/química , Supositórios/uso terapêutico , Neoplasias do Colo do Útero/genética , Neoplasias do Colo do Útero/patologiaRESUMO
Gene therapy targeted human papillomavirus (HPV) is a promising treatment for cervical cancer, and the key for clinical application depends on an effective gene delivery method. Our aim was to formulate a new pharmaceutical formula for appropriate gene delivery intravaginally. For the first time, we here developed a new polyethylenimine (PEI) based vaginal suppository. The sectional immunofluorescence results confirmed the delivery efficacy both in vivo and in vitro. The quenching fluorescence and decreased gene expression in topical epithelium of green fluorescence protein (GFP) transgenic mice demonstrated the efficient targeting potential of the suppository. The other aim of this study was to evaluate the biocompatibility of the PEI based transfer. To our knowledge, this was also the first study to explore the toxicity in vivo systematically and comprehensively. Our study provided novel ideas for the translational application of PEI based suppository to the prevention and treatment of cervical cancer.
Assuntos
Materiais Biocompatíveis/química , Técnicas de Transferência de Genes , Polietilenoimina/química , Supositórios/química , Vagina/metabolismo , Animais , DNA/administração & dosagem , Células Epiteliais/metabolismo , Feminino , Proteínas de Fluorescência Verde/metabolismo , Células HEK293 , Células HeLa , Humanos , Inflamação/patologia , Camundongos Endogâmicos C57BLRESUMO
The purpose of this study was developing a novel hydroxypropyl methyl cellulose-co-polyacrylamide-co-methacrylic acid (HPMC-co-PAM-co-PMAA) hydrogel, which was used as rectal suppository to regulate the blood glucose of diabetes. HPMC-co-PAM-co-PMAA hydrogel was fabricated via free-radical polymerization. Fourier transform infrared spectroscopy (FTIR) and Raman spectra were used to confirm the fabrication of HPMC-co-PAM-co-PMAA hydrogel. Their inner morphology was observed with scanning electron microscope (SEM). The extracts of hydrogel were applied to study their cell viability. The hypoglycemic effects of insulin (INS)-loaded HPMC-co-PAM-co-PMAA hydrogels were investigated by rectal administration. FTIR and Raman spectra confirmed the obtaining of HPMC-co-PAM-co-PMAA hydrogels. Many micro-pores were found in the SEM photograph of HPMC-co-PAM-co-PMAA hydrogels. Cell experiments indicated that HPMC-co-PAM-co-PMAA hydrogel was out of cytotoxicity. In vitro release profiles showed that INS-loaded hydrogel could release INS at a continuous manner in pHâ¯7.4 buffer (rectal conditions). Animal experiments suggested that INS-loaded hydrogel had an obvious hypoglycemic effect. Therefore, as a convenient and economic method of administration, INS-loaded HPMC-co-PAM-co-PMAA hydrogels could be used as rectal suppositories to regulate blood glucose.
Assuntos
Resinas Acrílicas/química , Glicemia/metabolismo , Diabetes Mellitus Experimental/tratamento farmacológico , Hidrogéis/química , Derivados da Hipromelose/química , Insulina/química , Metacrilatos/química , Administração Retal , Animais , Diabetes Mellitus Experimental/sangue , Portadores de Fármacos/química , Liberação Controlada de Fármacos , Insulina/administração & dosagem , Insulina/farmacologia , Insulina/uso terapêutico , Masculino , Ratos , Ratos Sprague-Dawley , Supositórios/administração & dosagem , Supositórios/química , Supositórios/farmacologia , Supositórios/uso terapêuticoRESUMO
A vaginal suppository containing ulinastatin (UTI) was developed as a hospital pharmacy product from UTI injection solution and Witepsol® S-55. After mixing at 50°C for 0-8 h, UTI suppositories were prepared, which had good UTI content uniformity. Because 2% surfactant was contained in S-55, the UTI injection solution formed a water-in-oil type emulsion as a suppository base. The measured residual moisture content (loss on drying (LOD)) in the prepared vaginal suppositories decreased as the mixing time increased, but their hardness (hardness test (HT)) increased. Near (N) IR spectra of UTI suppositories were measured after mixing for 0-8 h. The best calibration models to predict the HT and LOD of the suppositories were determined based on the NIR spectra by the leave-one-out method in a partial least-squares regression analysis (PLS). The validation result indicated that PLS models for HT and LOD were obtained based on the spectra treated by a combination of smoothing and normalized, respectively, and the model consisted of three latent variables. The plots between the predicted and measured pharmaceutical properties (HT and LOD) based on the calibration data were superimposed with those of the external validation data. The developed NIR spectroscopy method was applied to the preparation process monitoring for UTI vaginal suppositories. In the prepared vaginal suppositories, the predicted LOD decreased as the mixing time increased, and the measured LOD values superimposed well with the predicted values. In contrast, the predicted HT increased as the mixing time increased, and the measured values superimposed with the predicted values.
Assuntos
Composição de Medicamentos , Glicoproteínas/química , Preparações Farmacêuticas/química , Calibragem , Química Farmacêutica , Hospitais , Preparações Farmacêuticas/síntese química , Espectroscopia de Luz Próxima ao Infravermelho , Supositórios/síntese química , Supositórios/químicaRESUMO
Drug delivery via the rectum is a useful alternative route of administration to the oral route for patients who cannot swallow. Traditional rectal dosage forms have been historically used for localized treatments including delivery of laxatives, treatment of hemorrhoids and for delivery of antipyretics. However, the recent trend is showing an increase in the development of novel rectal delivery systems to deliver drug directly into the systemic circulation by taking advantage of porto-systemic shunting. The present review is based on research studies carried out between years 1969-2017. Data for this review have been derived from keyword searches using Scopus and Medline databases. Novel rectal drug delivery systems including hollow-type suppositories, thermo-responsive and muco-adhesive liquid suppositories, and nanoparticulate systems incorporated into an appropriate vehicle have offered more control over delivery of drug molecules for local or systemic actions. In addition, various methods for in vitro-in vivo evaluation of rectal drug delivery systems are covered which is as important as the formulation, and must be carried out using appropriate methodology. Continuous research and development in this field of drug delivery may unleash the hidden potential of the rectal drug delivery systems.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Excipientes/administração & dosagem , Reto/efeitos dos fármacos , Supositórios/administração & dosagem , Animais , Composição de Medicamentos , Liberação Controlada de Fármacos/efeitos dos fármacos , Liberação Controlada de Fármacos/fisiologia , Excipientes/química , Excipientes/metabolismo , Humanos , Reto/metabolismo , Supositórios/química , Supositórios/metabolismoRESUMO
Metronomic photodynamic therapy (mPDT) was developed to improve tumor-specific responses through cell death by apoptosis. We developed an mPDT suppository kit including ALA and LED suppositories and analyzed its killing effect on rectal tumors in rabbits. METHODS: The ALA (10â¯wt%) suppository was prepared using ALA powder, type 36 semi-synthetic fatty acid glyceride, and azone. The LED suppository was constructed by encapsulating LED units and a circuit in transparent epoxy resin. VX2 cells were injected into the rectal submucosa of rabbits to establish a carcinoma model in situ. The ALA suppository was inserted into the rectal cavity for 30â¯min of uptake and activated for 1â¯h by the LED suppository at a power density of 20â¯mW/cm2. The mPDT process was repeated three times once a day. MRI was used to monitor tumor growth, histopathology and TUNEL staining were performed at 14â¯days after mPDT. RESULTS: The overall response rate was 60% in the mPDT group using the kit in which the tumor size was decreased up to about 50% at 7â¯days post-mPDT and almost eliminated at 14â¯days. HE staining showed that only 6.16% of the tumor tissue remained after mPDT treatment. TUNEL detection showed that the apoptosis rate was 18.9%. CONCLUSION: We verified the killing effect of the mPDT suppository kit on rectal tumors in rabbits based on mPDT that induced tumor cell apoptosis.
Assuntos
Apoptose/efeitos dos fármacos , Fármacos Fotossensibilizantes/toxicidade , Supositórios/química , Ácido Aminolevulínico/toxicidade , Animais , Apoptose/efeitos da radiação , Linhagem Celular Tumoral , Luz , Imageamento por Ressonância Magnética , Fotoquimioterapia , Fármacos Fotossensibilizantes/uso terapêutico , Coelhos , Neoplasias Retais/diagnóstico por imagem , Neoplasias Retais/tratamento farmacológico , Neoplasias Retais/patologia , Transplante HomólogoRESUMO
In spite of the vast arsenal of therapeutic agents, therapy of herpes virus infection (HVI) is very difficult, particularly in pregnant women, newborns and children in the first years of life, as well as in patients with immune deficiency. In this regard, possibility of using immunoglobulins for the treatment of HVI is currently attracting the attention of doctors. The aim of this work was to develop a suppository form of the drug containing donor immunoglobulins with high levels of neutralizing antibodies to herpes simplex virus types 1 and 2 for the treatment of chronic forms of herpetic disease. The study included the following steps: 1) selection of gamma-globulins with high antibody titer for HSV-1 and HSV-2 ELISA test; 2) determination of the level of neutralizing antibodies in the selected series of gamma-globulins in tests in tissue cultures and animals; 3) lyophilization of immunoglobulins; 4) development of the suppository form of the preparation containing gamma-globulin donors with high levels of neutralizing antibodies to HSV-1 and HSV-2; 5) study of the safety of the activity of neutralizing antibodies to HSV-1 and HSV-2 in the suppository form of the drug with hyaluronic acid used as immunomodulator. As the result of this work, immunoglobulin preparation in the suppository form was developed. The developed preparation meets the requirements for safety and efficacy. It is not toxic or pyrogenic. The problems of clinical use of this drug as a method of HVI therapy are discussed.
Assuntos
Anticorpos Neutralizantes/administração & dosagem , Anticorpos Antivirais/administração & dosagem , Herpes Simples/tratamento farmacológico , Herpesvirus Humano 1/imunologia , Herpesvirus Humano 2/imunologia , Animais , Anticorpos Neutralizantes/biossíntese , Anticorpos Neutralizantes/isolamento & purificação , Anticorpos Antivirais/biossíntese , Anticorpos Antivirais/isolamento & purificação , Doença Crônica , Avaliação Pré-Clínica de Medicamentos , Cobaias , Herpes Simples/imunologia , Herpes Simples/virologia , Humanos , Soros Imunes/química , Masculino , Camundongos , Coelhos , Ratos , Supositórios/administração & dosagem , Supositórios/químicaRESUMO
We evaluated the potential utility of hydrogels for delivery of the photosensitizing agents 5-aminolevulinic acid (ALA) and hematoporphyrin monomethyl ether (HMME) to rectal tumors. Hydrogel suppositories containing ALA or HMME were administered to the rectal cavity of BALB/c mice bearing subcutaneous tumors of SW837 rectal carcinoma cells. For comparison, ALA and HMME were also administered by three common photosensitizer delivery routes; local administration to the skin and intratumoral or intravenous injection. The concentration of ALA-induced protoporphyrin IX or HMME in the rectal wall, skin, and subcutaneous tumor was measured by fluorescence spectrophotometry, and their distribution in vertical sections of the tumor was measured using a fluorescence spectroscopy system. The concentration of ALA-induced protoporphyrin IX in the rectal wall after local administration of suppositories to the rectal cavity was 9.76-fold (1 h) and 5.8-fold (3 h) higher than in the skin after cutaneous administration. The maximal depth of ALA penetration in the tumor was ~3-6 mm at 2 h after cutaneous administration. Much lower levels of HMME were observed in the rectal wall after administration as a hydrogel suppository, and the maximal depth of tumor penetration was <2 mm after cutaneous administration. These data show that ALA more readily penetrates the mucosal barrier than the skin. Administration of ALA as an intrarectal hydrogel suppository is thus a potential delivery route for photodynamic therapy of rectal cancer.
Assuntos
Ácido Aminolevulínico/administração & dosagem , Hematoporfirinas/administração & dosagem , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Fármacos Fotossensibilizantes/administração & dosagem , Protoporfirinas/metabolismo , Neoplasias Retais/tratamento farmacológico , Administração Intravenosa , Administração Tópica , Ácido Aminolevulínico/química , Animais , Linhagem Celular Tumoral , Hematoporfirinas/química , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/administração & dosagem , Camundongos , Fotoquimioterapia/métodos , Fármacos Fotossensibilizantes/química , Supositórios/administração & dosagem , Supositórios/química , Ensaios Antitumorais Modelo de XenoenxertoRESUMO
Conventional suppositories sometimes fail in exerting their therapeutic activity as the base materials melt inside body cavities. Also they are not suitable to provide long term treatment. Biomedical grade silicone elastomers may be used to fabricate non-dissolvable suppositories to overcome these disadvantages. We kneaded 4 analgesics into the 2 kinds of silicone polymers at 1%, 5% and 10% drug loading, respectively, to test their mechanical properties and drug release profiles. The optimized drug-polymer combinations were used to fabricate suppositories, and three dimensional printing (3DP) was used to create the suppository moulds. Subsequently, the drug release profiles and biocompatibility of the suppositories were studied. It was found that, the mechanical properties of the drug laden silicone elastomers and the rate of drug release from the elastomers can be tuned by varying drug-polymer combinations. The silicone elastomers containing 1% (w/w) and 5% (w/w) diclofenac sodium were the optimal formulations with prolonged drug release and biocompatibility at cellular level. These properties, together with complex geometries offered by 3DP technique, potentially made the non-dissolving suppositories promising therapeutic agents for personalized medicine.
Assuntos
Impressão Tridimensional , Elastômeros de Silicone/química , Supositórios/química , Analgésicos/química , Anestésicos Locais/química , Animais , Anti-Inflamatórios não Esteroides/química , Linhagem Celular , Química Farmacêutica , Preparações de Ação Retardada/química , Diclofenaco/química , Liberação Controlada de Fármacos , Módulo de Elasticidade , Ibuprofeno/química , Cetoprofeno/química , Lidocaína/química , Camundongos , Solubilidade , Resistência à TraçãoRESUMO
Cervical cancer is one of the most life threatening types of cancer among women and is generally resistant to chemotherapy. The objective of this study was to prepare a vaginal suppository containing a chemotherapeutic agent and a genetic material that can be applied locally for cervical cancer. Paclitaxel was selected as the chemotherapeutic agent and siRNA which inhibits BCL-2 oncogene was selected as the genetic material. Bcl-2 siRNA, paclitaxel and paclitaxel/Bcl-2 siRNA combination were incorporated into solid lipid nanoparticles (SLNs) and were dispersed separately in vaginal suppositories prepared with PEG 6000. Physicochemical properties of SLNs, their cytotoxicities on HeLa cell lines and also the effect of SLNs on the total protein amount of the cells were examined followed by the investigation of release rates of the active materials from the SLNs prepared. Average diameters of all SLNs prepared were below 180nm with a positive zeta potential value between +22.20 and +48.16mV at the pH range of 4.2 and 7.4. The release of Bcl-2 siRNA from SLNs incorporated Bcl-2 siRNA and the release of paclitaxel (PTX) from PTX incorporated SLNs were completed within 12h and 36h. SLNs incorporating Bcl-2 siRNA and paclitaxel/Bcl-2 siRNA were found to be more toxic when compared to paclitaxel incorporated SLN and placebo SLN. The disintegration of the vaginal suppositories as well as the release of the SLNs was completed within 2 h. This study indicates that vaginal suppository containing SLNs can bring the advantages of the simultaneous delivery of paclitaxel and siRNA via vaginal route with no help from professionals.
Assuntos
Administração Intravaginal , Paclitaxel/administração & dosagem , Proteínas Proto-Oncogênicas c-bcl-2/genética , RNA Interferente Pequeno/genética , Neoplasias do Colo do Útero/tratamento farmacológico , Neoplasias do Colo do Útero/genética , Antineoplásicos/administração & dosagem , Antineoplásicos/química , Cromatografia Líquida de Alta Pressão , Colorimetria , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos , Feminino , Células HeLa , Humanos , Concentração de Íons de Hidrogênio , Lipídeos/química , Lipossomos/química , Nanopartículas/química , Paclitaxel/química , Tamanho da Partícula , Solventes , Supositórios/químicaRESUMO
Astragalus polysaccharide (APS) (used for intestinal protection) was added to formulate the Tongshu suppository to improve the pharmacokinetics of Aceclofenac, which were assessed in New Zealand rabbits using an orthogonal experimental design. The single-agent Aceclofenac was taken as the control formulation. The concentration-time and drug release curves were drawn, and T max (min), C max (µg·mL(-1)), AUC0â∞ , and MRT were compared using a pharmacokinetic systems program. The formulated Tongshu suppository had moderate hardness, a smooth surface with uniform color, and theoretical drug-loading rate of 8%. Its release rate was in accordance with the drug preparation requirements. The concentration-time curves and drug release curves revealed that the maximum concentrations (C max) were 4.18 ± 1.03 µg·mL(-1) and 3.34 ± 0.41 µg·mL(-1) for the Tongshu and Aceclofenac suppositories, respectively, showing statistically insignificant difference, while the peak times were 34.87 ± 4.69 min and 34.76 ± 6.34 min, respectively, also showing statistically insignificant difference. Compared with the Aceclofenac suppository, the relative bioavailability of the Tongshu suppository was 104.4%, and the difference between them was statistically insignificant. In this experiment, the Tongshu suppository was prepared using the hot-melt method. In vivo pharmacokinetic studies confirmed it had higher bioavailability than the Aceclofenac suppository.
Assuntos
Supositórios/química , Supositórios/farmacocinética , Animais , Área Sob a Curva , Disponibilidade Biológica , Química Farmacêutica/métodos , Cor , Diclofenaco/administração & dosagem , Diclofenaco/análogos & derivados , Diclofenaco/química , Diclofenaco/farmacocinética , Liberação Controlada de Fármacos , Dureza , Coelhos , Ratos , Supositórios/administração & dosagem , Tecnologia Farmacêutica/métodosRESUMO
Vaginal microbicides are a promising means to prevent the transmission of HIV, empowering women by putting protection under their control. We have been using gel technology to develop microbicides in the intermediate texture space to overcome shortcomings of current solid and liquid forms. We recently formulated semisoft ovules from mixed polymer combinations of carrageenan and Carbopol 940P to overcome some of the flaws with our previous generation of formulations based solely on carrageenan. To determine the user acceptability of the reformulated gels, women first evaluated intact semisoft ovules before evaluating ovules that had been subjected to mechanical crushing to simulate samples that represent post-use discharge. Women then evaluated combinations of intact and discharge samples to understand how ovule textures correlated with texture of the resulting discharge samples. Carbopol concentration directly and inversely correlated with willingness to try for discharge samples and intact samples, respectively. When evaluating intact samples, women focused on the ease of inserting the product and preferred firmer samples; conversely, when evaluating discharge samples, softer samples that resulted in a smooth paste were preferred. Significant differences between samples were lost when evaluating pairs as women made varying trade-offs between their preference for ease of inserting intact ovules and acceptability of discharge appearance. Evaluating samples that represent different stages of the use cycle reveals a more holistic measure of product acceptability. Studying sensory acceptability in parallel with biophysical performance enables an iterative design process that considers what women prefer in terms of insertion as well as possibility of leakage.
Assuntos
Anti-Infecciosos/administração & dosagem , Satisfação do Paciente , Polímeros/administração & dosagem , Supositórios/administração & dosagem , Resinas Acrílicas/química , Administração Intravaginal , Adolescente , Adulto , Carragenina/química , Composição de Medicamentos/métodos , Feminino , Humanos , Pessoa de Meia-Idade , Supositórios/química , Adulto JovemRESUMO
Our objective was to develop novel vagina retentive cream suppositories (VRCS) of progesterone having rapid disintegration and good vaginal retention. VRCS of progesterone were prepared using oil in water (o/w) emulsion of mineral oil or theobroma oil in hard fat and compared with conventional vaginal suppositories (CVS) prepared by hard fat. VRCS formulations were tested for content uniformity, disintegration, melting range, in vitro release and stability studies. The most stable formulation (VRCS I) was subjected to scaling-up manufacturing and patients' satisfaction test. The rapid disintegration, good retentive properties are applicable through the inclusion of emulsified theobroma oil rather than hydrophilic surfactant into the hard fat bases. The release profile of progesterone from VRCS I showed a biphasic pattern due to the formation of progesterone reservoir in the emulsified theobroma oil. All volunteers involved in patients' satisfaction test showed high satisfactory response to the tested formulation (VRCS). The in vivo pharmacokinetic study suggests that VRCS of progesterone provided higher rate and extent of absorption compared to hard fat based suppositories. Our results proposed that emulsified theobroma oil could be promising to solve the problems of poor patients' satisfaction and variability of drug absorption associated with hard fat suppositories.
Assuntos
Progesterona/administração & dosagem , Progesterona/química , Supositórios/administração & dosagem , Supositórios/química , Vagina/efeitos dos fármacos , Cremes, Espumas e Géis Vaginais/administração & dosagem , Cremes, Espumas e Géis Vaginais/química , Química Farmacêutica/métodos , Estudos Cross-Over , Emulsões/química , Feminino , Humanos , Interações Hidrofóbicas e Hidrofílicas , Pessoa de Meia-Idade , Óleos/química , Satisfação do Paciente , Tensoativos/química , Absorção Vaginal , Água/químicaRESUMO
Pharmaceutical development was adopted in the current study to propose a pediatric rectal formulation of sulpiride as a substitute to the available oral or parenteral formulations in the management of Tourette syndrome (TS). The goal was to formulate a product that is easy to use, stable, and highly bioavailable and to achieve a rapid clinical efficacy. Towards this aim, sulpiride solid dispersion (SD) with tartaric acid at a weight ratio of 1:0.25 was incorporated into different suppository bases, namely witepsol W25, witepsol H15, witepsol E75, suppocire NA, suppocire A, glycerogelatin, and polyethylene glycols. The formulae were evaluated in vitro using different pharmacotechnical methods such as visual, melting, weight and content uniformities, drug release, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and X-ray diffraction (XRD) analyses. In vivo bioavailability was also assessed in rabbits to compare the bioavailability of either raw sulpiride-incorporated or its SD-incorporated witepsol H15-based suppositories to its oral suspension (reference). Sulpiride SD-incorporated witepsol H15 formulation showed acceptable in vitro characteristics with a bioavailability of 117% relative to oral dosing, which excel that in humans (27% after dosing of oral product). In addition, the proposed formula not only passed the 6-month stability study but also proposed a promising scale-up approach. Hence, it showed a great potential for pediatric product development to manage TS in rural areas.
Assuntos
Sulpirida/química , Sulpirida/farmacologia , Supositórios/química , Supositórios/farmacologia , Síndrome de Tourette/tratamento farmacológico , Animais , Disponibilidade Biológica , Varredura Diferencial de Calorimetria/métodos , Química Farmacêutica/métodos , Masculino , Polietilenoglicóis/química , Coelhos , Triglicerídeos/química , Difração de Raios X/métodosRESUMO
CONTEXT: Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). OBJECTIVE: This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation temperature, viscosity and mechanical properties. MATERIALS AND METHODS: Bioadhesive liquid suppositories were prepared by the cold method using poloxamer 407 (P 407), Poloxamer 188 (P 188) and various amounts of different bioadhesive polymers. Their gelation temperatures, viscosity values and mechanical properties were determined using texture analyzer by 4 × 4 factorial design. RESULTS: It was seen that in presence of KP, gelation temperature of formulation P 407/P 188 (4/20%) significantly decreased from 64 to 37.1 °C. It is to be noted that addition of increasing concentrations of bioadhesive polymers lowered gelation temperature and its decrease was highest with addition of Carbopol 934 P (C). Results of texture profile analysis (TPA) showed that formulations containing C have significantly higher hardness and adhesiveness values than other bioadhesive formulations. According to TPA, gel structure of liquid suppository formulation F5, containing P 407/P 188/KP/C (4/20/2.5/0.8%), exhibited the greatest hardness, compressibilty, adhesiveness and besides greatest viscosity. DISCUSSION AND CONCLUSION: According to mechanical properties and viscosity values, it was concluded that F5 could be a promising formulation.