Developing a Multifunctional Silk Fabric with Dual-Driven Heating and Rapid Photothermal Antibacterial Abilities Using High-Yield MXene Dispersions.

Two-dimensional material titanium carbide (Ti3C2Tx MXene) has been widely used for building diverse functional materials; however, the disadvantages of unsatisfactory yield and low concentration during the preparation process generally limit its large-scale promotion. In the present work, an MXene dispersion with enhanced yield (90%), high concentration (45 mg/mL), and excellent dispersibility was successfully prepared. Subsequently, the active MXene nanosheets were effectively in situ deposition onto the silk fiber by means of dip-coating, relying on van der Waals forces and hydrogen bonds. The obtained MXene-decorated silk fabric (MXene@silk) exhibits satisfactory electrical conductivity (170 mS/cm), excellent photothermal and electrothermal conversion properties, especially dual-drive energy conversion, rapid thermal responses, and long-term functional stability. Furthermore, UV protection factor of the fabric, and its antibacterial efficiency against Gram-negative Escherichia coli (E. coli) within 20 min of contact reach over 110 and 99%, respectively, demonstrating remarkable UV resistance and rapid photothermal antibacterial ability. Meanwhile, the fabric of MXene@silk still retains the original characteristics of breathability, softness, and skin-friendly properties compared to the untreated. The multifunctional fabric constructed through a facile and high-yield strategy shows a noticeable potential applying to smart textiles to meet people's multipurpose needs in the future.

Electrical and Magnetodielectric Properties of Magneto-Active Fabrics for Electromagnetic Shielding and Health Monitoring.

An efficient, low-cost and environmental-friendly method to fabricate magneto-active fabrics (MAFs) based on cotton fibers soaked with silicone oil and iron oxide microfibers (mFe) at mass fractions 2 wt.%, 4 wt.% and 8 wt.% is presented. It is shown that mFe induce good magnetic properties in MAFs, which are subsequently used as dielectric materials for capacitor fabrication. The electrical properties of MAFs are investigated in a static magnetic field with intensities of 0 kA/m, 160 kA/m and 320 kA/m, superimposed on a medium-frequency electric field. The influence of mFe on the electrical capacitance and dielectric loss tangent is determined, and it can be observed that the electrical conductivity, dielectric relaxation times and magnetodielectric effects are sensibly influenced by the applied magnetic and electric fields. The results indicate that the MAFs have electrical properties which could be useful for protection against electromagnetic pollution or for health monitoring.

Photothermal graphene/UiO-66-NH2 fabrics for ultrafast catalytic degradation of chemical warfare agent simulants.

Lightweight and wearable fabrics with rapid self-detoxification functions are highly desired to resist chemical warfare agents (CWAs). Metal organic frameworks (MOFs) with high specific surface area and customizability are singularly attractive because of their ability to effectively capture and catalytically degrade CWAs. Herein, photothermal graphene-based nanocomposite fabrics are designed by wet-spinning and chemical reduction of graphene oxide fibers followed by in situ growth of UiO-66-NH2. The flexible graphene fabrics decorated with UiO-66-NH2 nanoparticles exhibit an ultrafast photothermal catalytic decontamination of dimethyl 4-nitrophenyl phosphate (DMNP), a typical simulant of CWAs. The half-life of the degradation reaction decreases from 3.4 to 1.6 min under simulated solar light irradiation, a significant gain over the values reported in the literature. Furthermore, DMNP can be degraded in 20 min by the graphene/UiO-66-NH2 fabric, and even after 5 cycles the degradation efficiency still retains more than 92 %. More importantly, the photothermal conversion of graphene and its instantaneous heat transfer to the UiO-66-NH2 catalyst effectively accelerate the catalytic reaction kinetics, achieving the fast detoxification of DMNP. The combination of catalytic degradation of MOFs with photothermal conversion effect of graphene makes the lightweight and flexible fabrics promising for protection against CWAs and other pollutants.

Infrared-Radiation-Enhanced Nanofiber Membrane for Sky Radiative Cooling of the Human Body.

Extreme heat events are mainly responsible for weather-related human mortality due to climate change. However, there is a lack of outdoor thermal management for protecting people from extreme heat events. We present a novel infrared-radiation-enhanced nanofiber membrane (NFM) that has good infrared resonance absorption and selectively radiates thermal radiation of the human body through the atmosphere and into the cold outer space. The NFM comprises polyamide 6 (PA6) nanofibers and randomly distributed SiO2 submicron spheres and has sufficient air permeability and thermal-moisture comfortability because of its interconnect nanopores and micropores. We measure the sky radiative cooling performance under a clear sky, and PA6/SiO2 NFM produces temperatures that are about 0.4-1.7 °C lower than those of commercial textiles when covering dry and wet hands and temperatures 1.0-2.5 °C lower than the ambient temperature when thermal conduction and convection are isolated in a closed device. Our processed PA6/SiO2 NFM combines sky radiative cooling with thermal management of the human body very well, which will promote the development of radiative cooling textiles.

Titania nanowires functionalized polyester fabrics with enhanced photocatalytic and antibacterial performances.

Flexible organic fabrics coated with titania find wide applications in pollutant degradations and antibiosis. Because of the enhanced charge separations, TiO2 with one-dimensional nanostructures exhibits photocatalytic activity superior to that of nanoparticulate films; however, only the later has been achieved on organic substrates through commonly sol-gel techniques till now. In this study, radially aligned TiO2 nanowires were precipitated on polyester fabrics through multi-steps of surface roughening, sol-gel TiO2 seeding, hydrogen titanate nanobelts precipitation, and finally sulfuric acid treatment. Both mesoporous anatase TiO2 nanowires and single-crystalline rutile TiO2 nanorods have been achieved, which, together with some unchanged titanate nanobelts, exhibited an overall narrowed band gap of ca. 2.50eV. The TiO2 nanowires on flexible PET fabrics showed higher photocatalytic activity towards degradations of not only rhodamine B in water but also toluene gas in air under UV light illumination, when compared with either TiO2 nanotube array or commercial Degussa P25 nanoparticulate films on metallic Ti substrates. Remarkable sterilization of E. coli and S. epidermidis under visible light irradiation was also achieved. The excellent photocatalytic and antibacterial performances were attributed to the unique mixed 1D nanostructures, phase junctions, abundant surface hydroxyl groups, and the narrowed band gap.

Solar photodegradation of a textile azo dye using synthesized ZnO/Bentonite.

The present work is devoted to the synthesis of a new photocatalyst ZnO (7.5%)/Bentonite prepared by impregnation method and its successful application for the degradation of Solophenyl Red 3BL (SR 3BL) under solar light (∼660 W/m2). The X-ray diffraction (XRD) indicates mixed phases of the nanocomposite catalyst (ZnO/Bentonite), characterized by scanning electron microscopy, X-ray fluorescence and attenuated total reflection. The optical properties confirm the presence of the Wurtzite ZnO phase with an optical gap of 3.27 eV. The catalyst dose (0.25-1 gL-1), pH solution (2.5-11) and initial dye concentration (5-75 mg/L) are optimized. The optimal pH (∼6.7) is close to the natural environment. The photodegradation yield increases with decreasing the SR 3BL concentration. The equilibrium is reached within 160 min and the data are well fitted by the Langmuir-Hinshelwood model; the SR 3BL disappearance obeys to a first-order kinetic with an apparent rate constant of 10-2 mn-1. The best yield of SR 3BL photodegradation (92%) is achieved for a concentration of 5 mg/L and a catalyst dose of 0.75 gL-1 at free pH.

Synthesis of Novel UV Absorbers Bisindolylmethanes and Investigation of Their Applications on Cotton-Based Textile Materials.

Nowadays modified textiles, especially UV-protective, antibacterial and antimicrobial ones, have become the focus of great interest. In this study, several new UV absorbers, bis(indolyl)methane derivatives, were synthesized and grafted onto polyvinyl alcohol polymer (PVA). Their application properties on cotton-based textile materials were determined; the UV protection factor values of the modified fabrics were measured (UPF); and the antibacterial features of the fabrics were tested.

In vitro assessment of ultraviolet protection of coloured cotton knitted fabrics with different structures under stretched and wet conditions.

Clothing provides intrinsic ultraviolet (UV) protection that can be improved by colouration. However, the daily wearing condition can undermine the UV protection of coloured clothing wherein garments are stretched by body movement and/or wetted by perspiration of wearers. Knitwear is an indispensable clothing in summer, but its UV protection against wearing conditions lacks extensive study especially in a fabric structural approach. This article aimed at narrowing the research gap by focusing on the UV protection against stretch and wetness provided by various knitted fabric constructions incorporating the knit, tuck and miss stitches. The results show that the black knitted fabrics exhibit a significant reduction in the UV protection factor by 53% on average at a 10% stretch level. Knitted fabrics with miss stitches retained good UV protection even when the fabrics were stretched by 20% of its original dimensions.

New textiles of biocidal activity by introduce insecticide in cotton-poly (GMA) copolymer containing ß-Cd.

The present work deals with the preparation of innovative cotton textiles which act against blood sucking insects such as mosquitoes. Thus experiments were designed to incorporation of efficient insecticide (Permethrin, bioallethrin) in the macro-molecular structure of modified cotton fabrics. Chemical modification of cotton was realized by grafting with glycidyl methacrylate alone or in combination with ß-cyclodextrin by irradiation using fasting electron beam. Retreatment of the so obtained modified cotton was also made to increase the amount of CDs, and in turn, their cavities within the molecular structure of the modified cottons. Finished fabrics were though evaluated using chemical analysis; physical testing, bioassay tests and IR as well as SEM. Results obtained conclude that the amount of insecticide in the finished fabrics increases by increasing of the fixed amount of cyclodextrins which incorporate through their cavities the insecticide. The bioassay test shows that finished cotton fabrics display fast acting against mosquitoes.

Photolysis of brominated flame retardants in textiles exposed to natural sunlight.

Photolytic transformation profiles of technical hexabromocyclododecane (HBCD) and technical decabromodiphenyl ether (DecaBDE) in flame-retarded textiles exposed to natural sunlight were compared. Textiles that contained approximately 4% HBCDs by weight showed no substantial loss of any of the HBCD diastereomers during the entire exposure period (371 days), indicating that they were resistant to sunlight, that is, that debromination and isomerization of HBCD diastereomers did not occur under the experimental conditions. Exposure of a textile treated with technical DecaBDE resulted in the formation of polybrominated dibenzofurans (PBDFs) as products of photodecomposition of polybrominated diphenyl ethers present in the technical DecaBDE. After 329 days of exposure, the total PBDF concentration reached a maximum of 27 000 ng g(-1), which was approximately 10 times the initial concentration. During the experiment, di- to hexa-BDF congener concentrations increased continuously. Although the concentrations of PBDFs in the textiles were 4­5 orders of magnitude lower than the concentrations of polybrominated diphenyl ethers, it is important to note that PBDFs were formed as a result of sunlight exposure during normal use of products treated with technical DecaBDE.

Invisible metallic microfiber in clothing presents unrecognized MRI risk for cutaneous burn.

SUMMARY: We report a case of a thermal burn that occurred during MR imaging likely caused by invisible silver-embedded microfibers in the fabric of an undershirt. As the prevalence of fabric containing nondetectable metallic microfiber increases in athletic and "tech" clothing, the importance of having patients change into safe facility-provided garments before MR imaging is emphasized.

Functionalization of cellulose-containing fabrics by plasma and subsequent metal salt treatments.

In order to upgrade the UV-protection and antibacterial functional properties of cotton/polyester (80/20), cotton/linen (50/50) and linen/viscose-polyester (50/50) fabric blends, they were treated with different plasma gases (oxygen, air, and argon) followed by subsequent treatment with certain metal salts namely Zn-acetate, Cu-acetate, Al-chloride, and Zr-oxychloride. The obtained results show that the type of plasma gas, the kind of metal salt as well as the nature of the treated substrate play an important role in the extent of enhancing the demanded functional properties. Oxygen plasma treatment followed by Cu-acetate or Zn-acetate treatment gives the best UV-protection or antibacterial activity respectively, keeping other parameters constant. The surface morphology of some untreated and plasma-treated samples was also analyzed by SEM.

Multivariate analysis of anionic, cationic and nonionic textile surfactant degradation with the H(2)O(2)/UV-C process by using the capabilities of response surface methodology.

Anionic, cationic and nonionic surfactants being frequently employed in the textile preparation process were subjected to H(2)O(2)/UV-C treatment. As a consequence of the considerable number of parameters affecting the H(2)O(2)/UV-C process, an experimental design methodology was used to mathematically describe and optimize the single and combined influences of the critical process variables treatment time, initial H(2)O(2)concentration and chemical oxygen demand (COD) on parent pollutant (surfactant) as well as organic carbon (COD and total organic carbon (TOC)) removal efficiencies. Multivariate analysis was based on two different photochemical treatment targets; (i) full oxidation/complete treatment of the surfactants or, alternatively, (ii) partial oxidation/pretreatment of the surfactants to comply with the legislative discharge requirements. According to the established polynomial regression models, the process independent variables "treatment time" (exerting a positive effect) and "initial COD content" (exerting a negative effect) played more significant roles in surfactant photodegradation than the process variable "initial H(2)O(2) concentration" under the studied experimental conditions.

UV clothing and skin cancer.

Skin cancer incidence in Croatia is steadily increasing in spite of public and governmental permanently measurements. It is clear that will soon become a major public health problem. The primary cause of skin cancer is believed to be a long exposure to solar ultraviolet (UV) radiation. The future designers of UV protective materials should be able to block totally the ultraviolet radiation. The aim of this paper is to present results of measurements concerning UV protecting ability of garments and sun-screening textiles using transmission spectrophotometer Cary 50 Solarscreen (Varian) according to AS/NZS 4399:1996; to show that standard clothing materials are not always adequate to prevent effect of UV radiation to the human skin; and to suggest the possibilities for its improvement for this purpose.

Analysis of photochemically induced cotton bound residues of deltamethrin by an immunoassay technique.

A sensitive and selective indirect competitive ELISA was developed for the detection of deltamethrin bound residues on cotton texture. Cross-reactivity studies with the main deltamethrin photodegradation products showed high specificity of deltamethrin polyclonal antibody to the parent compound. No cross-reactivity was measured with deltamethrin photodegradtion products derived from the alcohol moiety (3-phenoxybenzaldhyde, phenoxybenzyl alcohol, cyanohydrin, and 3-phenoxybenzoic acid), and lesser amounts were observed with the acid moiety (deltamethric acid). The dot-blot immunoassay was performed on cotton fabric discs spiked with deltamethrin and irradiated to assess the suitability of this system to detect bound residue. The dot-blot immunoassay results revealed that the bound form of deltamethrin has binding affinity with deltamethrin antibody similar to the parent compound. In addition, the test system was used to detect bound and free residues of deltamethrin on cotton samples exposed to three cycles of simulated sunlight and water wash. The results obtained suggest that the competitive ELISA format can be used as a tool for monitoring free and bound residues of deltamethrin impregnated on cotton targets.

Laboratory and outdoor assessment of UV protection offered by flax and hemp fabrics dyed with natural dyes.

The safest protection from UV radiation (UVR) exposure is offered by clothing and its protectiveness depends on fabric composition (natural, artificial or synthetic fibers), fabric parameters (porosity, weight and thickness) and dyeing (natural or synthetic dyes, dye concentration, UV absorbing properties, etc.). In this study the UV protection properties of two fabrics made of natural fibers (flax and hemp) dyed with some of the most common natural dyes were investigated. UVR transmittance of fabrics was measured by two methods: one based on the utilization of a spectrophotometer equipped with an integrating sphere (in vitro test), and the other based on outdoor measurements taken by a spectroradiometer. Transmittance measurements were used to calculate the ultraviolet protection factor (UPF). Experimental results revealed that natural dyes could confer good UV protection, depending mainly on their different UVR-absorbing properties, provided that the fabric construction already guaranteed good cover. An increase in cover factor caused by the dyeing process was also detected. Weld-dyed fabrics gave the highest protection level. The comparison between the two methods applied to measure fabric transmittance pointed out that the UPFs calculated by in vitro measurements were generally lower than those based on outdoor data, indicating an underestimation of the actual protection level of tested fabrics assessed by the in vitro test.

Functionalization of catalase for a photochemical immobilization on poly(ethylene terephthalate).

The enzyme catalase (EC 1.11.1.6) was covalently immobilized on textile carrier fabrics made of poly(ethylene terephthalate) (PET) by a novel combined wet chemical and photochemical process. The functionalization of catalase with allyl groups succeeds in a wet chemical treatment of the enzyme with allylglycidylether. This modified enzyme was bonded covalently to the textile material by a photochemical immobilization using a monochromatic excimer UV lamp (222 nm). Using this two-step procedure nearly 60 mg enzyme/g carrier could be fixed durably. The efficiency of the immobilization products was investigated by measuring the enzymatic decomposition of hydrogen peroxide in comparison to the free enzyme. The relative activity of the catalase after the immobilization was nearly 5% compared to the free, not fixed enzyme; however, even after 30 reuses, the modified and immobilized catalase still showed a distinct activity.