Ten-year follow-up on adoption of endodontic technology and clinical guidelines amongst Danish general dental practitioners.

OBJECTIVE: The aim of this study was to re-assess the adoption of certain endodontic technology and central treatment principles of root canal treatments as advocated by guidelines presented by the European Society of Endodontology. MATERIAL AND METHODS: The questionnaire included the same questions in 2003 and 2013. The general dental practitioners (GDPs) anonymously reported how frequent ('often', 'occasionally', and 'never') they used certain endodontic technology and adhered to central treatment principles. The statistical analyses were performed using Chi-squared test and Goodman-Kruskal's γ-coefficient as an association measure. RESULTS: The overall response rate of the 2013 group was 46.5% (n = 531). The frequencies of GDPs reporting often use of rubber dam, apex locator and rotary NiTi instruments were significantly higher (p < .0001) than in 2003, as well as reporting the use of composite resin for coronal sealing (p < .019). Adoption was significantly influenced by the factors gender (p = .601) and time since graduation (p = .361), and the cluster analyses revealed the neglected use of rubber dam to be associated with no established postoperative recall system. CONCLUSIONS: After 10 years, there was a higher frequency of GDPs who had adopted certain endodontic technologies. However, progress towards high-quality root canal treatment might be obstructed as the majority of GDPs avoids consistent use of rubber dam, and routinely neglects recalls for postoperative controls of their endodontic treatments.

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review.

OBJECTIVE: A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. MATERIAL AND METHODS: This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). RESULTS: A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). CONCLUSIONS: Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.

Ex vivo evaluation of new 2D and 3D dental radiographic technology for detecting caries.

OBJECTIVES: Proximal dental caries remains a prevalent disease with only modest detection rates by current diagnostic systems. Many new systems are available without controlled validation of diagnostic efficacy. The objective of this study was to evaluate the diagnostic efficacy of three potentially promising new imaging systems. METHODS: This study evaluated the caries detection efficacy of Schick 33 (Sirona Dental, Salzburg, Austria) intraoral digital detector images employing an advanced sharpening filter, Planmeca ProMax(®) (Planmeca Inc., Helsinki, Finland) extraoral "panoramic bitewing" images and Sirona Orthophos XG3D (Sirona Dental) CBCT images with advanced artefact reduction. Conventional photostimulable phosphor images served as the control modality. An ex vivo study design using extracted human teeth, ten expert observers and micro-CT ground truth was employed. RESULTS: Receiver operating characteristic analysis indicated similar diagnostic efficacy of all systems (ANOVA p > 0.05). The sensitivity of the Schick 33 images (0.48) was significantly lower than the other modalities (0.53-0.62). The specificity of the Planmeca images (0.86) was significantly lower than Schick 33 (0.96) and XG3D (0.97). The XG3D showed significantly better cavitation detection sensitivity (0.62) than the other modalities (0.48-0.57). CONCLUSIONS: The Schick 33 images demonstrated reduced caries sensitivity, whereas the Planmeca panoramic bitewing images demonstrated reduced specificity. XG3D with artefact reduction demonstrated elevated sensitivity and specificity for caries detection, improved depth accuracy and substantially improved cavitation detection. Care must be taken to recognize potential false-positive caries lesions with Planmeca panoramic bitewing images. Use of CBCT for caries detection must be carefully balanced with the presence of metal artefacts, time commitment, financial cost and radiation dose.

Gender trends in authorship in oral and maxillofacial surgery literature: A 30-year analysis.

The aim of the present study was to perform a bibliometric analysis of the gender distribution of first and senior authorships in important oral and maxillofacial journals over the 30-year period from 1980 to 2010. Articles published in three representative oral and maxillofacial surgery journals were selected. The years 1980, 1990, 2000, and 2010 were chosen as representative points in time for article selection. Original research, case reports, technical notes, and reviews were included in the analysis. Case reports and technical notes were pooled in one group. For each article, the gender of the first author as well as that of the senior author was determined, based on the inspection of their first name. The type of article was determined and the country of origin of the article was documented. A total 1412 articles were subjected to the data analysis. A significant increase in female authorship in oral and maxillofacial surgery could be identified over the chosen 30-year period. However, the number of publications by male authors was still significantly higher at all points of time, exceeding those of female authors by at least 3.8 fold in 2010. As there is a trend towards feminization of medicine and dentistry, the results of the present study may serve as the basis for further analysis of the current situation, and the identification of necessary actions to accelerate the closure of the gender gap in publishing in oral and maxillofacial surgery.

A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes.

STATEMENT OF PROBLEM: Milling is a central and important aspect of computer-aided design and computer-aided manufacturing (CAD/CAM) technology. High milling accuracy reduces the time needed to adapt the workpiece and provides restorations with better longevity and esthetic appeal. The influence of different milling processes on the accuracy of milled restorations has not yet been reviewed. PURPOSE: The purpose of this study was to investigate the influence of different milling processes on the accuracy of ceramic restorations. MATERIAL AND METHODS: Four groups of partial crowns were milled (each n = 17): Three groups in a 4-axial milling unit: (1) 1-step mode and Step Bur 12S (12S), (2) 1-step mode and Step Bur 12 (1Step), (3) 2-step mode and Step Bur 12 (2Step), and (4) one group in a 5-axial milling unit (5axis). The milled occlusal and inner surfaces were scanned and superimposed over the digital data sets of calculated restorations with specialized difference analysis software. The trueness of each restoration and each group was measured. One-way ANOVA with a post hoc Tukey test was used to compare the data (α = .05). RESULTS: The highest trueness for the inner surface was achieved in group 5axis (trueness, 41 ± 15 µm, P<.05). The 4-axial milling unit exhibited trueness at settings ranging from 61 µm (2Step) to 96 µm (12S). For the occlusal surface, the highest trueness was achieved with group 5axis (trueness, 42 ± 10 µm). The 4-axial milling unit exhibited trueness at settings ranging from 55 µm (1Step) to 76 µm (12S). CONCLUSIONS: Restorations milled with a 5-axial milling unit have a higher trueness than those milled with a 4-axial milling unit. A rotary cutting instrument with a smaller diameter results in a more accurate milling process. The 2-step mode is not significantly better than the 1-step mode.

Dental technology services and industry trends in New Zealand from 2010 to 2012.

OBJECTIVE: To provide a snapshot of the New Zealand dental technology industry and influencing factors. BACKGROUND: Developing an understanding of the commercial dental laboratory environment in New Zealand can provide insight into the entire dental industry. METHODS: A web-based survey was the primary method for data collection, with separate questionnaires used for dental laboratory owners and dental technician employees. RESULTS: The mean net income for dental laboratory owners in New Zealand was similar to that of the United Kingdom, at $40.50 per hour. Clinical dental technicians are the highest paid employees, with a mean of $33.49 per hour. The mean technical charge for complete dentures was $632.59; including clinical services, it was $1907.00. The mean charge for a porcelain-fused-to-metal (PFM) crown was $290.27. Dental laboratory owners expressed fear about the possibility of losing dental clients to overseas laboratories due to the availability and cheap charge of offshore work. Only 25.4% of dental laboratories surveyed had computer-aided design (CAD) facilities, and even fewer (7.9%) had computer-aided manufacturing (CAM) systems. CONCLUSION: Clinical dental technology appears to be prospering. The dental technology industry appears to be adapting and remains viable, despite facing many challenges.

Accuracy, reproducibility, and time efficiency of dental measurements using different technologies.

INTRODUCTION: Historically, orthodontists have taken dental measurements on plaster models. Technological advances now allow orthodontists to take these measurements on digital models. In this study, we aimed to assess the accuracy, reproducibility, and time efficiency of dental measurements taken on 3 types of digital models. METHODS: emodels (GeoDigm, Falcon Heights, Minn), SureSmile models (OraMetrix, Richardson, Tex), and AnatoModels (Anatomage, San Jose, Calif) were made for 30 patients. Mesiodistal tooth-width measurements taken on these digital models were timed and compared with those on the corresponding plaster models, which were used as the gold standard. Accuracy and reproducibility were assessed using the Bland-Altman method. Differences in time efficiency were tested for statistical significance with 1-way analysis of variance. RESULTS: Measurements on SureSmile models were the most accurate, followed by those on emodels and AnatoModels. Measurements taken on SureSmile models were also the most reproducible. Measurements taken on SureSmile models and emodels were significantly faster than those taken on AnatoModels and plaster models. CONCLUSIONS: Tooth-width measurements on digital models can be as accurate as, and might be more reproducible and significantly faster than, those taken on plaster models. Of the models studied, the SureSmile models provided the best combination of accuracy, reproducibility, and time efficiency of measurement.

Comparison between clinical and digital soft tissue measurements.

OBJECTIVE: The use of periodontal probes harbors the risk of measurement errors. The aim of this study was to investigate the accuracy of the digital determination of gingival recession and papilla height on virtual jaw models, given the hypothesis that they show lower intrarater and interrater variability than conventional linear measurements taken clinically or on cast models. MATERIALS AND METHODS: Gingival recessions and papilla heights were measured at 30 sites by five examiners using the following methods: (A) direct measurements using a periodontal probe intraorally or (B) on cast models using a caliper, (C) digital measurements on virtual models obtained by optical scans taken intraorally, or (D) made of cast models using the same software. Measurements were repeated after 1 week and intraclass, intrarater, and interrater correlations of the measurements using the four different methods were analyzed. RESULTS: The greatest disagreement between the 1st and 2nd measurement was identified for method A. Recessions were less reliably measured than papillae. The best agreement between methods was found in the digital ones (C and D). Regarding papilla height, increased values were obtained when method D was applied as compared with both clinical evaluations. For gingival recession, method A measured the highest values. CONCLUSION: In the present study, the use of digital technologies by intraoral scanning or scanning of cast models improved the reproducibility and lowered the variance of measurements within one individual and between different investigators. CLINICAL SIGNIFICANCE: Providing a more reliable and examiner-independent technique for measurements of the soft tissue architecture could improve data quality in periodontal research and in the analysis of different clinical treatment modalities.

Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques.

INTRODUCTION: Rapid prototyping is a fast-developing technique that might play a significant role in the eventual replacement of plaster dental models. The aim of this study was to investigate the accuracy and reproducibility of physical dental models reconstructed from digital data by several rapid prototyping techniques. METHODS: Twelve mandibular and maxillary conventional plaster models from randomly chosen subjects were selected and served as the gold standard. The plaster models were scanned to form high-resolution 3-dimensional surface models in .stl files. These files were converted into physical models using 3 rapid prototyping techniques: digital light processing, jetted photopolymer, and 3-dimensional printing. Linear measurements on the plaster models were compared with linear measurements on the rapid prototyping models. One observer measured the height and width of the clinical crowns of all teeth (first molar to first molar) on all models (plaster and replicas) using a digital caliper. All models were measured 5 times with a 2-week interval between measurements. RESULTS: The intraobserver agreement was high (intraclass correlation coefficient >0.94). The mean systematic differences for the measurements of the height of the clinical crowns were -0.02 mm for the jetted photopolymer models, 0.04 mm for the digital light processing models, and 0.25 mm for the 3-dimensional printing models. For the width of the teeth, the mean systematic differences were -0.08 mm for the jetted photopolymer models, -0.05 mm for the digital light processing models, and -0.05 mm for the 3-dimensional printing models. CONCLUSIONS: Dental models reconstructed by the tested rapid prototyping techniques are considered clinically acceptable in terms of accuracy and reproducibility and might be appropriate for selected applications in orthodontics.

Analysis of dental treatment performed by dental residents at General Dentistry Department of Tokyo Dental College Chiba Hospital over 6 years following introduction of mandatory dental clinical training system.

Six years have passed since the introduction of legislation mandating at least 1 year of clinical training for those who have passed the national dentist examination. To determine whether clinical training has been appropriately implemented at the General Dentistry Department of Tokyo Dental College Chiba Hospital, a managed-type clinical training facility, the number of patients treated and types of dental and dental technical work performed by dental residents trained by the department were summarized and analyzed. The number of patients treated per dental resident increased from 11 in 2006 to 15 in 2011. By treatment type, periodontic treatment was the most frequently performed throughout the study period, followed by endodontic treatment. Conservation treatment, prosthodontic treatment with crowns/bridges, and prosthodontic treatment with dentures were performed at a similar moderate frequency, while oral surgical treatment was performed least frequently throughout the study period. The frequency of periodontic treatment increased slightly, whereas that of endodontic treatment decreased slightly or remained almost unchanged after introduction of the mandatory clinical training system. When the distribution of dental treatment performed at our department was compared with that of dental treatment performed by general dentists across Japan in 2011, our department showed a slightly lower frequency of periodontic treatment and higher frequency of endodontic treatment than the national total, whereas the frequency of other types of treatment was similar between the two populations. These results demonstrated that appropriate clinical training has been provided by our department to meet the purpose of offering dentists the opportunity to acquire the basic diagnostic and treatment abilities that would enable them to provide appropriate treatment for injuries and diseases frequently encountered in daily practice. The study also revealed some problems, such as a decreasing number of residents engaging in dental technical work each year. For additional improvement in the quality of dental clinical training, more analyses are needed to further identify and address potential problems in the system.

Clinical care provided on post-graduate dental clinical training course at Tokyo Dental College Chiba Hospital, Department of General Dentistry.

Number of patients assigned to dental residents, course of treatment and number of various technical tasks performed as described in the Reports on Clinical Training of Dentists published by the Department of General Dentistry, Tokyo Dental College Chiba Hospital since its establishment in 2002 were compared between before (2003-2005) and after (2006-2007) clinical training was made mandatory, and the state of clinical residency evaluated. Number of patients assigned generally increased, and mean number of patients treated by each resident in 2007 (15.08) was approximately 2 times higher than that in 2003 (8.47). Total number of treatments was 1.38 times higher in 2007 than in 2003, and periodontal treatment accounted for approximately 40% of all treatment both before and after clinical training became mandatory. Number of technical tasks in 2004-2007 was less than half the peak in 2003. To further improve clinical training, evaluation and implementation of effective approaches is necessary to secure an adequate number of patients, widen the variety of cases and increase the number of technical tasks.

Current trends in endodontic practice: emergency treatments and technological armamentarium.

The current clinical practice of endodontics includes the utilization of a variety of new technological advances and materials. The last comprehensive survey that compared treatment modalities used in endodontic practices was conducted in 1990. The purpose of the current survey was to determine the frequency with which these new endodontic technologies and materials are being used in endodontic practices today. An e-mail questionnaire was sent to the 636 active diplomates of the American Board of Endodontics with current e-mail addresses. Two hundred thirty-two diplomates responded for a response rate of 35%. Calcium hydroxide was found to be the most frequently used intracanal medicament for all cases diagnosed with necrotic pulps. Ibuprofen was the most frequently prescribed medication for pain, and penicillin was the most frequently prescribed antibiotic when an active infection was present. Eighty-two percent of the respondents are still incorporating hand files in some fashion during the cleansing and shaping phase of treatment. Lateral condensation and continuous wave were the most common methods used for obturation. Digital radiography was reported as being used by 72.5% of the respondents, whereas 45.3% reported using the microscope greater than 75% of the patient treatment. Ultrasonics was used by 97.8% of the respondents. It appears from the results that new endodontic technology is currently being used in the endodontic offices of those who responded to the survey.

The use of newer technologies by New Zealand dentists.

OBJECTIVE: To determine the prevalence and use of newer technologies among New Zealand general dental practitioners (GDPs). DESIGN: Cross-sectional survey of a random sample of GDPs. METHOD: A postal questionnaire was sent to 700 GDPs enrolled on the DCNZ Dentists' Register (response rate 62.8%). RESULTS: Of all the technologies investigated, the digital apex locator (81.4%) and intra-oral camera (49.6%) were the most commonly used. Males and females differed with respect to the use of dental implant systems (41.6% and 24.1% respectively; P<0.05) and intra-oral cameras (53.6% and 39.8% respectively; P<0.05). New Zealand-trained and overseas-trained dentists differed with respect to their use of dental implant systems, with fewer of the latter (21.3%) using them than the former (40.2%). Power bleaching units were more common among more recent graduates. Compared to their city counterparts, dentists in smaller centres appeared to be slower in adopting most forms of newer technology. CONCLUSION: This study (the first of its kind internationally) provides an informative snapshot of New Zealand dentists' use of dental technologies during 2007. Efficiency was the most common reason for using newer technology.

Pre-clinical endodontics: a survey amongst German dental schools.

AIM: To evaluate the state and level of pre-clinical endodontic education in German dental schools and to evaluate differences with regard to intensity and extent of teaching, time devoted to teaching pre-clinical endodontics, personnel resources in teaching and technical equipment. METHODOLOGY: Twenty-eight questionnaires were e-mailed to those in charge of pre-clinical endodontic education in German dental schools. The extent of education, the student-teacher ratio, the teaching content as well as the application of teaching materials and technologies were asked. If, after 4 weeks, no response had been received, the questionnaire was sent out by e-mail again. In the absence of a reply, a phone call was made to the corresponding university to conduct the survey by phone. RESULTS: With feedback from 27 of 28 dental schools, the response rate was 96%. Pre-clinical endodontic education at German universities varied considerably. Theory classes ranged from 5 to 30 h (13.3 h mean), practical classes from 12.5 to 60 h (45.4 h mean). The student to staff ratio varied between 9 : 1 and 30 : 1 (16 : 1 mean). Forty-eight per cent of the universities had a specialist in endodontics or a teacher with a special interest. A dental microscope was available for pre-clinical teaching purposes in 38% of the universities. The majority (63%) of universities taught root canal preparation with rotary nickel titanium instruments. CONCLUSION: Pre-clinical endodontic education varied considerably between German universities because of differences in programme design, staff and course content.

Dental technicians' experiences with all-ceramic extra-coronal restorations.

The aim of this study was to identify the dental technicians' experiences with extra-coronal all-ceramic restorations. A questionnaire was mailed to all laboratories registered in The Norwegian Association of Dental Laboratory Owners (n=186). The response was 149 (80%). All-ceramic restorations were produced by 93 (62%) of the responding laboratories. A few of these (1 7%) produced the majority (67%) of the restorations. The dental technicians reported low rates of remakes (median 2%) for all-ceramic restorations. The low production and the limited number of laboratories that perform this work show that there is room for extended training and more expertise in this field.

The adoption of new endodontic technology amongst Danish general dental practitioners.

AIM: To assess the adoption of new endodontic technology in a population of Danish practitioners. METHODOLOGY: Members of the Copenhagen Dental Association (n = 1156) were approached with a questionnaire concerning the frequency of various endodontic procedures. Three options were available: often, occasionally and never. Responses were anonymous. The statistical analyses were performed as studies of association in two- or three-way contingency tables, and with Goodman-Kruskal's gamma-coefficient as the basic tool chosen. RESULTS: Only data from general practitioners (GPs) in private practice were analysed (n = 956). The response rate was 72%. NiTi hand instruments were often used to negotiate canals by 18%, whilst 10% often used NiTi rotary systems. Electronic apex locators were often employed by 15%. Nineteen per cent reported that warm gutta-percha was often used. A majority (53%) often spend two sessions to instrument a molar, and 20% often needed three or more sessions to finish the shaping phase. To complete a treatment of a nonvital case most practitioners reported to use at least three appointments. Only 4% frequently applied rubber dam. CONCLUSIONS: The adoption of new endodontic technology is at an early stage amongst Danish GPs. A new revised remuneration system might influence the rate of adoption, allowing the practitioners to act more rationally and produce a higher frequency of good-quality root fillings. Progress towards high quality endodontics might be hindered by the nonuse of rubber dam.