RESUMO
The wine industry in Georgia produces vast amounts of grape pomace that is currently mostly wasted, while only a minor amount is used for distilling alcohol. The study was carried out on the grape pomace from the three most widely used grapevine sorts (Vitis vinifera var. Rkatsiteli, V. vinifera var. Saperavi, V. labrusca var. Isabella) in Georgia, and quantities of tocopherols and antioxidants were evaluated. The antioxidant activity was assessed by diphenyl-picrylhydrazyl (DPPH) and measurement of visible light absorption at 515 nm, and tocopherol was measured by absorption at 470 nm via a spectrophotometer. The results indicated that the grape pomace contains considerable tocopherols and antioxidant activity. However, the antioxidant activity had slightly been decreased. These results suggest that grape pomace can be an economically attractive resource for the pharmaceutical and food industries. Utilization of grape pomace for producing pharmaceutical and cosmetic goods with tocopherol and antioxidants can solve two problems: it can recycle waste and develop new profitable businesses in biotechnology.
Assuntos
Antioxidantes/metabolismo , Destilação/métodos , Etanol/metabolismo , Fermentação , Tocoferóis/metabolismo , Vitis/metabolismo , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/métodos , Especificidade da Espécie , Vitis/classificação , VinhoRESUMO
The double fortification of salt with iodine and iron has been proposed as a method for the mass prevention of iron deficiency anemia. This article reports on the technical and financial aspects of the production of such double fortified salt (DFS) based on the experiences of current and past producers. It draws contrasts with the established process of fortifying salt solely with iodine particularly examining the cost and complexity of the processes involved. Based on these factors it questions the commercial viability of existing DFS formulations and thus their sustainability as vehicles for the widespread distribution of iron outside a subsidized environment. It makes suggestions for the future development of DFS particularly relating to the development of less expensive iron formulations suitable for use with lower quality salts and identifies key technical and economic areas to be taken into account when considering the production of DFS.
Assuntos
Tecnologia de Alimentos/economia , Tecnologia de Alimentos/normas , Alimentos Fortificados , Iodo , Ferro da Dieta/administração & dosagem , Cloreto de Sódio na Dieta , Indústria de Processamento de Alimentos/economia , Indústria de Processamento de Alimentos/normas , Humanos , Índia , Internacionalidade , Ferro da Dieta/classificaçãoRESUMO
BACKGROUND: Double-fortified salt (DFS) is a vehicle for dual fortification with iron and iodine, to reduce their respective deficiencies. This background article is the third in a series reviewing available research, analyses, and experiences on DFS as an effective delivery vehicle for iron and iodine. OBJECTIVES: The objective of this article is to systematically evaluate current programs distributing DFS around the world and catalogue opportunities, risks, and challenges related to programs that incorporate DFS. We carried out a narrative review of DFS programs from around the world with our data sources deriving from a mix of a nonsystematic literature search and interviews with key informants. METHODS: We assessed programmatic experience with DFS from social safety net programs in India (from the states of Bihar, Madhya Pradesh, and Uttar Pradesh) and from non-social safety net country programs or projects in Argentina, Cote d'Ivoire, Kenya, Morocco, Nigeria, Philippines, and Sri Lanka. RESULTS: Findings revealed color change of the final DFS product was an issue in 9 of the 14 programs or studies reviewed and was the most significant challenge that had a direct impact on consumer acceptance and uptake regardless of type of program (open market or social safety net). Other challenges identified were related to the quality of the salt and lack of DFS formulation standards and regulatory monitoring protocols. CONCLUSIONS: DFS programs need to focus on 1) improved technology with better consumer acceptance and better performance when used with lower-quality salt; 2) elucidation and enforcement of DFS formulation quality standards, along with producer incentives; and 3) strong government backing at the policy level. DFS offers a unique opportunity to leverage an almost universally consumed product with the addition of 2 important nutrients missing in many populations. However, program "maturity" will take time with urgent attention needed for quality production.
Assuntos
Tecnologia de Alimentos/economia , Tecnologia de Alimentos/normas , Alimentos Fortificados , Iodo/administração & dosagem , Ferro da Dieta/administração & dosagem , Avaliação de Programas e Projetos de Saúde , Cloreto de Sódio na Dieta , Tecnologia de Alimentos/métodos , Humanos , Índia , Internacionalidade , Ferro da Dieta/classificaçãoRESUMO
Could DFS help prevent iron deficiency and anemia? Studies in controlled settings (efficacy) demonstrate that double-fortified salt (DFS; iron added to iodized salt) reduces the prevalence of anemia and iron deficiency anemia. Studies in program settings (effectiveness) are limited and reported differing levels of DFS coverage, resulting in mixed evidence of impact on anemia. What iron formulations are available and how do they affect iodized salt? Ferrous sulfate and encapsulated ferrous fumarate (both with various enhancers and/or coating materials) are the main iron formulations currently in use for DFS. Adding iron to iodized salt may lead to adverse changes in the product, specifically discoloration and losses in iodine content. These changes are greatest when the iodized salt used in DFS production is of low quality (e.g., contain impurities, has high moisture, and is of large crystal size). DFS requires iodized salt of the highest quality and a high-quality iron formulation in order to minimize adverse sensory changes and iodine losses. Appropriate packaging of iodized salt is also important to prevent losses. What is known about the minimum requirements to manufacture DFS? DFS producers must use high-quality refined iodized salt meeting the minimum standards for DFS production (which is higher than standards for salt intended for iodization alone), and an iron formulation for which there are rigid quality-assurance measures to ensure consistent quality and blending techniques. The actual proportion of iodized salt meeting the stringent requirements necessary for DFS production is unclear, but likely to be low in many countries, especially those with fragmented salt industries and a low proportion of industrially produced salt. What are the financial implications of adding iron to iodized salt? As a result of higher input costs both for input salt and the iron compound, DFS is more expensive to produce than iodized salt and thus has a higher production cost. Various grades of iodized salt are produced and consumed in different sectors of the market. Experience in India indicates that, on average, producing DFS costs 31-40 US dollars/metric ton or 0.03-0.04 US dollars/kg more than high-quality refined iodized salt. The exact impact of this production-level cost difference on profit margins and consumer price is specific to the conditions of different salt markets. Factors such as transport costs, customary wholesale and retail mark-ups, and taxes all vary greatly and need to be assessed on a case by case basis. Is DFS in alignment with salt-reduction efforts? The WHO has long recognized that salt iodization is an important public health intervention to achieve optimal iodine nutrition and is compatible with salt-reduction goals. Fortification of salt (with any nutrient) should not be used to justify or encourage an increase in salt intake to the public. Any effort to expand salt fortification to other nutrients should be done in close consultation with WHO and those working on salt reduction. What has been the experience with DFS delivery under different platforms? To date, DFS has been introduced into the retail market and in social safety net (primarily in India) programs, but sensory changes in DFS have been raised as concerns. The higher price for DFS has limited expansion in the retail market. In social safety net programs where the cost of DFS is subsidized for beneficiaries, programs must consider long-term resourcing for sustainability. Overall: The optimal production and delivery of DFS are still under development, as many challenges need to be overcome. There is a beneficial impact on hemoglobin in efficacy trials. Thus, if those conditions can be replicated in programs or the technology can be adapted to better fit current production and delivery realities, DFS may provide an effective contribution in countries that need additional food-fortification vehicles to improve iron intake.
Assuntos
Anemia/prevenção & controle , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/normas , Alimentos Fortificados , Iodo , Ferro da Dieta/administração & dosagem , Estado Nutricional , Cloreto de Sódio na Dieta , Humanos , Índia , Internacionalidade , Compostos de Ferro/classificação , PolíticasRESUMO
BACKGROUND: This study developed a feasible catalytic method for d-allulose syrup production using a fusion enzyme, either in free or immobilized form, through hydrolysis of inulin extracted from Jerusalem artichoke tubers. RESULTS: d-Allulose 3-epimerase (DAE) was actively expressed in secretory form by fusing with the extracellular exo-inulinase CSCA in Escherichia coli BL21 (DE3). The best linker ligating the two enzymes was a flexible peptide containing 12 residues (GSAGSAAGSGEF). At 55 °C and pH 8.0, and as with the addition of 1 mmol L-1 Mn2+ , the CSCA-linkerE-DAE fusion enzyme obtained through high cell-density cultivation displayed a maximal exo-inulinase activity of 21.8 U mg-1 and resulted in a yield of 6.3 g L-1 d-allulose and 39.2 g L-1 d-fructose using 60 g L-1 inulin as the raw material. Catechol-modified alginate with titanium ions (Alg(Ti)PDA) was found to be a promising immobilization material for the fusion enzyme. After conversion for 8 days, the Alg(Ti)PDA-immobilized CSCA-linkerE-DAE (8 U g-1 ) completed 24 reaction cycles and retained over 80% of its original activity. Each reaction obtained an average of 19.8 g L-1 d-allulose and 32.7 g L-1 D-fructose from 60 g L-1 inulin. CONCLUSION: This study shed light on a feasible and cost-effective approach for the production of syrup containing d-allulose and D-fructose with inulin as the raw material via the use of a CSCA and DAE fusion enzyme. This syrup is of added value as a functional sweetener. © 2020 Society of Chemical Industry.
Assuntos
Frutose/química , Glicosídeo Hidrolases/química , Inulina/química , Racemases e Epimerases/química , Proteínas Recombinantes de Fusão/química , Biocatálise , Enzimas Imobilizadas/química , Enzimas Imobilizadas/genética , Enzimas Imobilizadas/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Tecnologia de Alimentos/economia , Glicosídeo Hidrolases/genética , Glicosídeo Hidrolases/metabolismo , Inulina/genética , Inulina/metabolismo , Proteínas Recombinantes de Fusão/genética , Proteínas Recombinantes de Fusão/metabolismoRESUMO
Despite food technology advancements, food safety policies and alert systems, foodborne diseases are still a relevant concern for consumers and public health authorities, with great impacts on the economy and the society. Evaluating the cost of foodborne diseases may support the design and the implementation of policy interventions. This paper proposes a simple method for cost identification of foodborne diseases, accessible to researchers and practitioners who are not specialist in economics. The method is based on the assumption that epidemiological and economic models can be integrated to understand how the burden of disease determines costs in a wider socio-economic perspective. Systems thinking and interdisciplinary approach are the pivotal conceptual tools of the method. Systems thinking allows for the understanding of the complex relationships working among the elementary units of a system (e.g. wildlife, bred animals, consumers, environment, agro-food industry) in the occurrence of a health problem such foodborne diseases. Complex systemic relationships usually cross the traditional boundaries of scientific knowledge (human medicine, veterinary science, economics) and sectoral institutional responsibilities (e.g. ministry of health, ministry of agriculture). For these reasons more scientific disciplines, institutional competences and social bodies need to work together to face complex health problems, in an interdisciplinary framework. The first step of the proposed method is the identification of the potential cost of the disease. To this aim, the authors first focus on the links between epidemiological and economic models, based on the fact that foodborne diseases, likewise other diseases, hit people's and animals' aptitude to produce utility and goods for the society (e.g. wellbeing, revenue, safe food). These utility losses are real economic costs. Then they show how simple economic models, such as the food supply chain, can help understand the way costs spread across the economic sectors and the society. It should be underlined that the authors adopt already existing and well rooted scientific tools, focusing in particular that their integration in an interdisciplinary framework can effectively contribute to increase the understanding of complex health problems in a viable way.
Assuntos
Efeitos Psicossociais da Doença , Doenças Transmitidas por Alimentos/economia , Doenças Transmitidas por Alimentos/epidemiologia , Modelos Biológicos , Modelos Econômicos , Animais , Análise Custo-Benefício , Inocuidade dos Alimentos , Abastecimento de Alimentos/economia , Abastecimento de Alimentos/estatística & dados numéricos , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/tendências , Humanos , Pesquisa Interdisciplinar , Saúde Única/economia , Anos de Vida Ajustados por Qualidade de Vida , Análise de SistemasRESUMO
Production technology for rice in the world has been advancing. The supply curve has shifted to the rightward and become flatter over time as well as the scale of economies have been enlarged in many countries. This has led to a great increase in yield per ha. and greater production globally. Accordingly, the rice prices have been becoming more stable and cheaper over time in real term despite of price hike around 2010. Potential of rice production increases for the future is quite large, while demand for table rice has been somewhat stagnant in major producing countries. Because the technology advancement is overwhelming in all food production, it would be hard to expect a global food shortage in the future, unless man sabotages. Developments of new products using rice for functional food may be important for the rice industries, therefore. Meanwhile, in the global rice economies, japonica rice markets are becoming phenomenal in high demand relative to indica. This may be possibly due to a globally long-lasting booming of Japanese restaurants featured by Sushi. Demand for japonica rice has been so strong that the prices of japonica rices are about double of indica rice. Because of short in supply relative to demand for japonica rice marketed globally, there are emerging japonica rice production in many rice producing countries shifting from indica rice to japonica, although the japonica rice production in each new area is still small.
Assuntos
Comércio/economia , Abastecimento de Alimentos/economia , Tecnologia de Alimentos/economia , Oryza , HumanosRESUMO
Cultured meat may be a novel food that would overcome the limits of conventional meat production. This paper assesses the willingness to try, buy and pay for cultured meat among a sample of Italian consumers, unveiling the attitudes towards an engineered food on the part of a consumer oriented in favour of the Mediterranean diet. A survey was conducted by submitting a questionnaire to 525 Italian consumers. Consumers showed higher agreement with the statements concerning positive externalities than the intrinsic characteristics of cultured meat, and more than half of the respondents (54%) stated that they would be willing to try cultured meat. The profile for a potential consumer of cultured meat was young, highly educated, somewhat familiar with cultured meat, a meat consumer and willing to reduce meat consumption. However, the survey findings may be biased by the unavailability of the product on the market and the information provided to the respondents focused on the potential benefits of cultured meat.
Assuntos
Comportamento do Consumidor , Preferências Alimentares , Tecnologia de Alimentos/métodos , Carne , Animais , Técnicas de Cultura de Células/métodos , Comportamento de Escolha , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/ética , Conhecimentos, Atitudes e Prática em Saúde , Humanos , Itália , Inquéritos e QuestionáriosRESUMO
In March 2012 ABC World News Report aired a series of reports on lean finely textured beef (LFTB) that resulted in a 10-year low for beef prices and the bankruptcy of a major firm that produced LFTB. Using a random sample survey, we tested the effects of the media frame "pink slime" and industry frame "lean finely textured beef," alongside media use, food-related knowledge, trust in food-related institutions and preference for local, fresh, organic and GMO-free foods on perceptions of risk related to ground beef containing pink slime/LFTB, processed foods and red meat. The "pink slime" frame was strongly and positively associated with risk related to ground beef, but not risk related to red meat or processed foods. Attention to news stories about pink slime/LFTB was strongly associated with risk related to ground beef and processed foods, but not red meat. We found varying effects of food values, knowledge and trust on all three dependent variables. Implications are discussed.
Assuntos
Meios de Comunicação , Comportamento do Consumidor , Preferências Alimentares , Tecnologia de Alimentos , Produtos da Carne/efeitos adversos , Indústria de Embalagem de Carne/métodos , Carne/efeitos adversos , Adulto , Idoso , Animais , Bovinos , Comportamento do Consumidor/economia , Inquéritos sobre Dietas , Feminino , Contaminação de Alimentos , Inocuidade dos Alimentos , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/tendências , Doenças Transmitidas por Alimentos/epidemiologia , Doenças Transmitidas por Alimentos/etiologia , Conhecimentos, Atitudes e Prática em Saúde , Humanos , Masculino , Carne/economia , Produtos da Carne/economia , Indústria de Embalagem de Carne/economia , Indústria de Embalagem de Carne/tendências , Pessoa de Meia-Idade , Risco , Terminologia como Assunto , Wisconsin/epidemiologiaRESUMO
Cultured meat grown in-vitro from animal cells is being developed as a way of addressing many of the ethical and environmental concerns associated with conventional meat production. As commercialisation of this technology appears increasingly feasible, there is growing interest in the research on consumer acceptance of cultured meat. We present a systematic review of the peer-reviewed literature, and synthesize and analyse the findings of 14 empirical studies. We highlight demographic variations in consumer acceptance, factors influencing acceptance, common consumer objections, perceived benefits, and areas of uncertainty. We conclude by evaluating the most important objections and benefits to consumers, as well as highlighting areas for future research.
Assuntos
Comportamento do Consumidor , Preferências Alimentares , Tecnologia de Alimentos , Produtos da Carne , Músculos/citologia , Animais , Células Cultivadas , Comportamento do Consumidor/economia , Inquéritos sobre Dietas , Rotulagem de Alimentos , Qualidade dos Alimentos , Inocuidade dos Alimentos , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/ética , Tecnologia de Alimentos/tendências , Humanos , Produtos da Carne/efeitos adversos , Produtos da Carne/análise , Produtos da Carne/economia , Indústria de Embalagem de Carne/economia , Indústria de Embalagem de Carne/ética , Indústria de Embalagem de Carne/tendências , Músculos/química , Medição de RiscoRESUMO
Probiotic yogurt, comprised of a Fiti sachet containing Lactobacillus rhamnosus GR-1 and Streptococcus thermophilus C106, has been used in the developing world, notably Africa, to alleviate malnutrition and disease. In sub-Saharan African countries, fermentation of cereals such as millet, is culturally significant. The aim of this study was to investigate the fermentation capability of millet when one gram of the Fiti sachet consortium was added. An increase of 1.8 and 1.4 log CFU/mL was observed for S. thermophilus C106 and L. rhamnosus GR-1 when grown in 8% millet in water. Single cultures of L. rhamnosus GR-1 showed the highest µmax when grown in the presence of dextrose, galactose and fructose. Single cultures of S. thermophilus C106 showed the highest µmax when grown in the presence of sucrose and lactose. All tested recipes reached viable counts of the probiotic bacteria, with counts greater than 106 colony-forming units (CFU)/mL. Notably, a number of organic acids were quantified, in particular phytic acid, which was shown to decrease when fermentation time increased, thereby improving the bioavailability of specific micronutrients. Millet fermented in milk proved to be the most favorable, according to a sensory evaluation. In conclusion, this study has shown that sachets being provided to African communities to produce fermented milk, can also be used to produce fermented millet. This provides an option for when milk supplies are short, or if communities wish to utilize the nutrient-rich qualities of locally-grown millet.
Assuntos
Alimentos Fermentados , Milhetes , Probióticos , Países em Desenvolvimento , Tecnologia de Alimentos/economia , Humanos , Lacticaseibacillus rhamnosus , Probióticos/análise , Probióticos/economia , Streptococcus thermophilusRESUMO
Three cos-type virulent Streptococcus thermophilus phages were isolated from failed mozzarella production in Uruguay. Genome analyses showed that these phages are similar to those isolated elsewhere around the world. The CRISPR1 and CRISPR3 arrays of the three S. thermophilus host strains from Uruguay were also characterized and similarities were noted with previously described model strains SMQ-301, LMD-9 and DGCC7710. Spontaneous bacteriophage-insensitive S. thermophilus mutants (BIMs) were obtained after challenging the phage-sensitive wild-type strain Uy02 with the phage 128 and their CRISPR content was analyzed. Analysis of 23 BIMs indicated that all of them had acquired at least one new spacer in their CRISPR1 array. While 14 BIMs had acquired spacer at the 5'-end of the array, 9 other BIMs acquired a spacer within the array. Comparison of the leader sequence in strains Uy02 and DGCC7710 showed a nucleotide deletion at position -1 in Uy02, which may be responsible for the observed ectopic spacer acquisition. Analysis of the spacer sequences upstream the newly acquired ectopic spacer indicated presence of a conserved adenine residue at position -2. This study indicates that natural strains of S. thermophilus can also acquire spacers within a CRISPR array.
Assuntos
Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , DNA Bacteriano/genética , Genoma Viral , Fagos de Streptococcus/genética , Fagos de Streptococcus/patogenicidade , Streptococcus thermophilus/genética , Antibiose/genética , Sequência de Bases , Queijo/microbiologia , Queijo/virologia , Mapeamento Cromossômico , DNA Intergênico/genética , Fermentação , Tecnologia de Alimentos/economia , Ontologia Genética , Sequenciamento de Nucleotídeos em Larga Escala , Humanos , Anotação de Sequência Molecular , Mutação , Alinhamento de Sequência , Fagos de Streptococcus/ultraestrutura , Streptococcus thermophilus/imunologia , Streptococcus thermophilus/virologia , Uruguai , VirulênciaRESUMO
Cultured meat is an unfamiliar emerging food technology that could provide a near endless supply of high quality protein with a relatively small ecological footprint. To understand consumer acceptance of cultured meat, this study investigated the influence of information provision on the explicit and implicit attitude toward cultured meat. Three experiments were conducted using a Solomon four-group design to rule out pretest sensitization effects. The first experiment (N = 190) showed that positive or negative information about cultured meat changed the explicit attitude in the direction of the information. This effect was smaller for participants who were more familiar with cultured meat. In the second experiment (N = 194) positive information was provided about solar panels, an attitude object belonging to the same sustainable product category as sustainable food products such as cultured meat. Positive information about solar panels was found to change the explicit attitude in the direction of the information. Using mood induction, the third experiment (N = 192) ruled out the alternative explanation that explicit attitude change in experiment 1 and 2 was caused by content free affect rather than category based inferences. The implicit attitude appeared insensitive to both information or mood state in all three experiments. These findings show that the explicit attitude toward cultured meat can be influenced by information about the sustainability of cultured meat and information about a positively perceived sustainable product. This effect was shown to be content based rather than merely affect based. Content based information in a relevant context could therefore contribute to the commercial success of cultured meat.
Assuntos
Técnicas de Cultura de Células/métodos , Comportamento do Consumidor , Preferências Alimentares , Tecnologia de Alimentos/educação , Conhecimentos, Atitudes e Prática em Saúde , Produtos da Carne , Técnicas de Cultura de Órgãos/métodos , Adolescente , Adulto , Animais , Pegada de Carbono , Técnicas de Cultura de Células/economia , Conservação dos Recursos Naturais , Estudos Cross-Over , Feminino , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/tendências , Humanos , Masculino , Produtos da Carne/efeitos adversos , Produtos da Carne/economia , Países Baixos , Técnicas de Cultura de Órgãos/economia , Autorrelato , Células-Tronco/citologia , Adulto JovemRESUMO
The easy access to large data sets has allowed for leveraging methodology in network physics and complexity science to disentangle patterns and processes directly from the data, leading to key insights in the behavior of systems. Here we use country specific food production data to study binary and weighted topological properties of the bipartite country-food production matrix. This country-food production matrix can be: 1) transformed into overlap matrices which embed information regarding shared production of products among countries, and or shared countries for individual products, 2) identify subsets of countries which produce similar commodities or subsets of commodities shared by a given country allowing for visualization of correlations in large networks, and 3) used to rank country fitness (the ability to produce a diverse array of products weighted on the type of food commodities) and food specialization (quantified on the number of countries producing a specific food product weighted on their fitness). Our results show that, on average, countries with high fitness produce both low and high specializion food commodities, whereas nations with low fitness tend to produce a small basket of diverse food products, typically comprised of low specializion food commodities.
Assuntos
Mineração de Dados/métodos , Tecnologia de Alimentos , Comércio , Alimentos , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/métodos , Tecnologia de Alimentos/estatística & dados numéricos , Humanos , InternacionalidadeAssuntos
Congressos como Assunto , Dietética/educação , Tecnologia de Alimentos/educação , Ciências da Nutrição/educação , Mobilidade Ocupacional , Dietética/economia , Dietética/tendências , Educação Continuada , Tecnologia de Alimentos/economia , Tecnologia de Alimentos/tendências , Humanos , Ciências da Nutrição/economia , Ciências da Nutrição/tendências , Estados Unidos , Recursos HumanosAssuntos
Tecnologia de Alimentos/economia , Alimentos Geneticamente Modificados/economia , Alimentos Geneticamente Modificados/estatística & dados numéricos , Plantas Geneticamente Modificadas/crescimento & desenvolvimento , Biotecnologia/economia , Biotecnologia/legislação & jurisprudência , Biotecnologia/tendências , Europa (Continente) , Abastecimento de Alimentos/economia , Abastecimento de Alimentos/métodos , Abastecimento de Alimentos/normas , Tecnologia de Alimentos/legislação & jurisprudência , Tecnologia de Alimentos/tendências , Alimentos Geneticamente Modificados/provisão & distribuição , Humanos , Plantas Geneticamente Modificadas/genética , Opinião Pública , Sementes , Estados Unidos , United States Food and Drug Administration/legislação & jurisprudênciaRESUMO
Energy-savings measures have been implemented in fluid milk plants to lower energy costs and the energy-related carbon dioxide (CO2) emissions. Although these measures have resulted in reductions in steam, electricity, compressed air, and refrigeration use of up to 30%, a benchmarking framework is necessary to examine the implementation of process-specific measures that would lower energy use, costs, and CO2 emissions even further. In this study, using information provided by the dairy industry and equipment vendors, a customizable model of the fluid milk process was developed for use in process design software to benchmark the electrical and fuel energy consumption and CO2 emissions of current processes. It may also be used to test the feasibility of new processing concepts to lower energy and CO2 emissions with calculation of new capital and operating costs. The accuracy of the model in predicting total energy usage of the entire fluid milk process and the pasteurization step was validated using available literature and industry energy data. Computer simulation of small (40.0 million L/yr), medium (113.6 million L/yr), and large (227.1 million L/yr) processing plants predicted the carbon footprint of milk, defined as grams of CO2 equivalents (CO2e) per kilogram of packaged milk, to within 5% of the value of 96 g of CO 2e/kg of packaged milk obtained in an industry-conducted life cycle assessment and also showed, in agreement with the same study, that plant size had no effect on the carbon footprint of milk but that larger plants were more cost effective in producing milk. Analysis of the pasteurization step showed that increasing the percentage regeneration of the pasteurizer from 90 to 96% would lower its thermal energy use by almost 60% and that implementation of partial homogenization would lower electrical energy use and CO2e emissions of homogenization by 82 and 5.4%, respectively. It was also demonstrated that implementation of steps to lower non-process-related electrical energy in the plant would be more effective in lowering energy use and CO2e emissions than fuel-related energy reductions. The model also predicts process-related water usage, but this portion of the model was not validated due to a lack of data. The simulator model can serve as a benchmarking framework for current plant operations and a tool to test cost-effective process upgrades or evaluate new technologies that improve the energy efficiency and lower the carbon footprint of milk processing plants.
Assuntos
Simulação por Computador , Tecnologia de Alimentos/métodos , Efeito Estufa , Leite , Animais , Pegada de Carbono , Análise Custo-Benefício , Armazenamento de Alimentos/economia , Armazenamento de Alimentos/métodos , Tecnologia de Alimentos/economia , Efeito Estufa/economia , Leite/economia , Pasteurização/economia , Pasteurização/métodosRESUMO
This paper describes the calibration, validation and testing process of a low-cost on-line visible-near infrared (400-1100 nm) sensor for the monitoring of fat and fatty acids content in milk during the manufacturing process of milk. The optical, mechanical and electronic designs of the sensor have been developed in Tekniker IK4 research centre just as its manufacturing process. The measurement range of the sensor is 400-1100 nm thus it covers the visible range (400-780 nm) and the short-wave near infrared (780-1100 nm). Chemometric techniques were applied with the purpose of obtaining a predictive model for each parameter correlating the spectra obtained by the sensor with the parameters analysed in the laboratory. The models were developed by Partial Least Squares Regression (PLS) obtaining one model for each parameter. The raw milk samples used in this work were provided by CAPSA (Asturias, Spain).