Adaptive Adhesions of Barnacle-Inspired Adhesive Peptides.

The strategy of robust adhesion employed by barnacles renders them fascinating biomimetic candidates for developing novel wet adhesives. Particularly, barnacle cement protein 19k (cp19k) has been speculated to be the key adhesive protein establishing the priming layer in the initial barnacle cement construction. In this work, we systematically studied the sequence design rationale of cp19k by designing adhesive peptides inspired by the low-complexity STGA-rich and the charged segments of cp19k. Combining structure analysis and the adhesion performance test, we found that cp19k-inspired adhesive peptides possess excellent disparate adhesion strategies for both hydrophilic mica and hydrophobic self-assembled monolayer surfaces. Specifically, the low-complexity STGA-rich segment offers great structure flexibility for surface adhesion, while the hydrophobic and charged residues can contribute to the adhesion of the peptides on hydrophobic and charged surfaces. The adaptive adhesion strategy identified in this work broadens our understanding of barnacle adhesion mechanisms and offers valuable insights for designing advanced wet adhesives with exceptional performance on various types of surfaces.

Self-assembly of a barnacle cement protein into intertwined amyloid fibres and determination of their adhesive and viscoelastic properties.

The stalked barnacle Pollicipes pollicipes uses a multi-protein cement to adhere to highly varied substrates in marine environments. We investigated the morphology and adhesiveness of a component 19 kDa protein in barnacle cement gland- and seawater-like conditions, using transmission electron microscopy and state-of-the art scanning probe techniques. The protein formed amyloid fibres after 5 days in gland-like but not seawater conditions. After 7-11 days, the fibres self-assembled under gland-like conditions into large intertwined fibrils of up to 10 µm in length and 200 nm in height, with a distinctive twisting of fibrils evident after 11 days. Atomic force microscopy (AFM)-nanodynamic mechanical analysis of the protein in wet conditions determined E' (elasticity), E'' (viscosity) and tan δ values of 2.8 MPa, 1.2 MPa and 0.37, respectively, indicating that the protein is a soft and viscoelastic material, while the adhesiveness of the unassembled protein and assembled fibres, measured using peak force quantitative nanomechanical mapping, was comparable to that of the commercial adhesive Cell-Tak™. The study provides a comprehensive insight into the nanomechanical and viscoelastic properties of the barnacle cement protein and its self-assembled fibres under native-like conditions and may have application in the design of amyloid fibril-based biomaterials or bioadhesives.

Biomineralization in Barnacle Base Plate in Association with Adhesive Cement Protein.

Barnacles strongly attach to various underwater substrates by depositing and curing a proteinaceous cement that forms a permanent adhesive layer. The protein MrCP20 present within the calcareous base plate of the acorn barnacle Megabalanus rosa (M. rosa) was investigated for its role in regulating biomineralization and growth of the barnacle base plate, as well as the influence of the mineral on the protein structure and corresponding functional role. Calcium carbonate (CaCO3) growth on gold surfaces modified by 11-mercaptoundecanoic acid (MUA/Au) with or without the protein was followed using quartz crystal microbalance with dissipation monitoring (QCM-D), and the grown crystal polymorph was identified by Raman spectroscopy. It is found that MrCP20 either in solution or on the surface affects the kinetics of nucleation and growth of crystals and stabilizes the metastable vaterite polymorph of CaCO3. A comparative study of mass uptake calculated by applying the Sauerbrey equation to the QCM-D data and quantitative X-ray photoelectron spectroscopy determined that the final surface density of the crystals as well as the crystallization kinetics are influenced by MrCP20. In addition, polarization modulation infrared reflection-absorption spectroscopy of MrCP20 established that, during crystal growth, the content of ß-sheet structures in MrCP20 increases, in line with the formation of amyloid-like fibrils. The results provide insights into the molecular mechanisms by which MrCP20 regulates the biomineralization of the barnacle base plate, while favoring fibril formation, which is advantageous for other functional roles such as adhesion and cohesion.

Short Peptides Derived from a Block Copolymer-like Barnacle Cement Protein Self-Assembled into Diverse Supramolecular Structures.

Peptides capable of self-assembling into different supramolecular structures have potential applications in a variety of areas. The biomimetic molecular design offers an important avenue to discover novel self-assembling peptides. Despite this, a lot of biomimetic self-assembling peptides have been reported so far; to continually expand the scope of peptide self-assembly, it is necessary to find out more novel self-assembling peptides. Barnacle cp19k, a key underwater adhesive protein, shows special block copolymer-like characteristics and diversified self-assembly properties, providing an ideal template for biomimetic peptide design. In this study, inspired by Balanus albicostatus cp19k (Balcp19k), we rationally designed nine biomimetic peptides (P1-P9) and systematically studied their self-assembly behaviors for the first time. Combining microscale morphology observations and secondary structure analyses, we found that multiple biomimetic peptides derived from the central region and the C-terminus of Balcp19k form distinct supramolecular structures via different self-assembly mechanisms under acidic conditions. Specifically, P9 self-assembles into typical amyloid fibers. P7, which resembles ionic self-complementary peptides by containing nonstrictly alternating hydrophobic and charged amino acids, self-assembles into uniform, discrete nanofibers. P6 with amphipathic features forms twisted nanoribbons. Most interestingly, P4 self-assembles to form helical nanofibers and novel ring-shaped microstructures, showing unique self-assembly behaviors. Apart from their self-assembly properties, these peptides showed good cytocompatibility and demonstrated promising applications in biomedical areas. Our results expanded the repertoire of self-assembling peptides and provided new insights into the structure-function relationship of barnacle cp19k.

Elemental Chemometrics as Tools to Depict Stalked Barnacle (Pollicipes pollicipes) Harvest Locations and Food Safety.

The stalked barnacle Pollicipes pollicipes is an abundant species on the very exposed rocky shore habitats of the Spanish and Portuguese coasts, constituting also an important economical resource, as a seafood item with high commercial value. Twenty-four elements were measured by untargeted total reflection X-ray fluorescence spectroscopy (TXRF) in the edible peduncle of stalked barnacles sampled in six sites along the Portuguese western coast, comprising a total of 90 individuals. The elemental profile of 90 individuals originated from several geographical sites (N = 15 per site), were analysed using several chemometric multivariate approaches (variable in importance partial least square discriminant analysis (VIP-PLS-DA), stepwise linear discriminant analysis (S-LDA), linear discriminant analysis (LDA), random forests (RF) and canonical analysis of principal components (CAP)), to evaluate the ability of each approach to trace the geographical origin of the animals collected. As a suspension feeder, this species introduces a high degree of background noise, leading to a comparatively lower classification of the chemometric approaches based on the complete elemental profile of the peduncle (canonical analysis of principal components and linear discriminant analysis). The application of variable selection approaches such as the VIP-PLS-DA and S-LDA significantly increased the classification accuracy (77.8% and 84.4%, respectively) of the samples according to their harvesting area, while reducing the number of elements needed for this classification, and thus the background noise. Moreover, the selected elements are similar to those selected by other random and non-random approaches, reinforcing the reliability of this selection. This untargeted analytical procedure also allowed to depict the degree of risk, in terms of human consumption of these animals, highlighting the geographical areas where these delicacies presented lower values for critical elements compared to the standard thresholds for human consumption.

Bioinspired Biomaterial Composite for All-Water-Based High-Performance Adhesives.

The exceptional underwater adhesive properties displayed by aquatic organisms, such as mussels (Mytilus spp.) and barnacles (Cirripedia spp.) have long inspired new approaches to adhesives with a superior performance both in wet and dry environments. Herein, a bioinspired adhesive composite that combines both adhesion mechanisms of mussels and barnacles through a blend of silk, polydopamine, and Fe3+ ions in an entirely organic, nontoxic water-based formulation is presented. This approach seeks to recapitulate the two distinct mechanisms that underpin the adhesion properties of the Mytilus and Cirripedia, with the former secreting sticky proteinaceous filaments called byssus while the latter produces a strong proteic cement to ensure anchoring. The composite shows remarkable adhesive properties both in dry and wet conditions, favorably comparing to synthetic commercial glues and other adhesives based on natural polymers, with performance comparable to the best underwater adhesives with the additional advantage of having an entirely biological composition that requires no synthetic procedures or processing.

Synthesis and Biological Activity of Acrylate Copolymers Containing 3-Oxo-N-allyl-1,2-benzisothiazole-3(2H)-carboxamide Monomer as a Marine Antifouling Coating.

A type of grafted acrylate copolymer resins, containing 3-oxo-N-allyl-1,2-benzisothiazole-2(3H)-carboxamide monomer and heterocyclic monomers, was synthesized through the copolymeri- zation of methyl methacrylate (MMA) and butyl acrylate (BA) with functional monomers. The structures of the monomers and copolymers were validated by infrared (IR) and 1 H nuclear magnetic resonance (NMR) spectroscopies. The inhibitory activities of the copolymers on algae, bacteria, and barnacle larvae were measured, and the antifouling potencies against marine macrofouling organisms were investigated. The results showed that the grafted resin had significant inhibitory effects on the growth of three marine algae (Isochrysis galbana, Nannochloropsisoculata, and Chlorella pyrenoidosa), and three bacteria (Vibrio coralliilyticus, Staphylococcus aureus,and Vibrio parahaemolyticus). The target copolymers also showed excellent inhibition of the survival of barnacle larvae. Additionally, the release rate of the antifoulant and the results of the marine field tests indicated that the grafted copolymers had outstanding antifouling potency against the attachment of marine macrofouling organisms.

Design of RGDS Peptide-Immobilized Self-Assembling ß-Strand Peptide from Barnacle Protein.

We designed three types of RGD-containing barnacle adhesive proteins using self-assembling peptides. In the present study, three types of RGD-containing peptides were synthesized by solid-phase peptide synthesis, and the secondary structures of these peptides were analyzed by CD and FT-IR spectroscopy. The mechanical properties of peptide hydrogels were characterized by a rheometer. We discuss the correlation between the peptide conformation, and cell attachment and cell spreading activity from the viewpoint of developing effective tissue engineering scaffolds. We created a peptide-coated cell culture substrate by coating peptides on a polystyrene plate. They significantly facilitated cell adhesion and spreading compared to a non-coated substrate. When the RGDS sequence was modified at N- or C-terminal of R-Y, it was found that the self-assembling ability was dependent on the strongly affects hydrogel formation and cell adhesion caused by its secondary structure.

Terpenoids from the South China Sea soft coral Sinularia multiflora.

A rare sinulariane-type norcembranoid sinulariadiolide B (1) with a unique cyano group, and a eunicellin-based diterpenoid multifloralin (2), along with two known related analogues, sinulariadiolide (3) and sclerophytin E (4), were isolated from the extract of the South China Sea soft coral Sinularia multiflora. Their structures were elucidated on the basis of detailed spectroscopic analysis and by comparison with previously reported data. Compounds 2 and 4 showed potent antifouling activity against barnacle Balanus albicostatus.

Three-dimensional structure of Megabalanus rosa Cement Protein 20 revealed by multi-dimensional NMR and molecular dynamics simulations.

Barnacles employ a protein-based cement to firmly attach to immersed substrates. The cement proteins (CPs) have previously been identified and sequenced. However, the molecular mechanisms of adhesion are not well understood, in particular, because the three-dimensional molecular structure of CPs remained unknown to date. Here, we conducted multi-dimensional nuclear magnetic resonance (NMR) studies and molecular dynamics (MD) simulations of recombinant Megabalanus rosa Cement Protein 20 (rMrCP20). Our NMR results show that rMrCP20 contains three main folded domain regions intervened by two dynamic loops, resulting in multiple protein conformations that exist in equilibrium. We found that 12 out of 32 Cys in the sequence engage in disulfide bonds that stabilize the ß-sheet domains owing to their placement at the extremities of ß-strands. Another feature unveiled by NMR is the location of basic residues in turn regions that are exposed to the solvent, playing an important role for intermolecular contact with negatively charged surfaces. MD simulations highlight a highly stable and conserved ß-motif (ß7-ß8), which may function as nuclei for amyloid-like nanofibrils previously observed in the cured adhesive cement. To the best of our knowledge, this is the first report describing the tertiary structure of an extracellular biological adhesive protein at the molecular level. This article is part of the theme issue 'Transdisciplinary approaches to the study of adhesion and adhesives in biological systems'.

Molecular Recognition of Structures Is Key in the Polymerization of Patterned Barnacle Adhesive Sequences.

The permanent adhesive produced by adult barnacles is held together by tightly folded proteins that form amyloid-like materials distinct among marine foulants. In this work, we link stretches of alternating charged and noncharged linear sequences from a family of adhesive proteins to their role in forming fibrillar nanomaterials. Using recombinant proteins and short barnacle cement derived peptides (BCPs), we find a central sequence with charged motifs of the pattern [Gly/Ser/Val/Thr/Ala-X], where X are charged amino acids, to exert specific control over timing, structure, and morphology of fibril formation. While most BCPs remain dormant, the core segment demonstrates rapid polymerization as well as an ability to template other peptides with no propensity for self-assembly. Patterned charge domains assemble dormant peptides through a specific antiparallel ß-sheet structure as measured by FTIR. While charged domains favor an antiparallel structure, BCPs without charged domains switch fibril assembly to favor simpler parallel ß-sheet aggregates. In addition to activation, charged domains direct nanofibers to grow into discrete microns long fibrils similar to the natural adhesive, while segments without such domains only form short branched aggregates. The assembly of adhesive sequences through recognition of structured templates outlines a strategy used by barnacles to control physical mechanisms of underwater adhesive delivery, activation, and curing based on molecular recognition between proteins.

Comparative Analysis of the Adhesive Proteins of the Adult Stalked Goose Barnacle Pollicipes pollicipes (Cirripedia: Pedunculata).

Adhesion in barnacles is still poorly understood. The cement gland secretes an insoluble multi-protein complex, which adheres very strongly to a variety of substrates in the presence of water. This adhesion mechanism is bioinspiring for the engineering of new adhesive materials, but to replicate this adhesive system, the genes coding for the cement constitutive proteins must be identified and elucidated, and their products characterised. Here, the complete sequences of three cement protein (CP) genes (CP-100K, CP-52K, and CP-19K) isolated from the cement gland of the stalked barnacle Pollicipes pollicipes (order Scalpelliformes) were obtained using RACE PCR. The three genes were compared to the 23 other acorn barnacle CP genes so far sequenced (order Sessilia) to determine common and differential patterns and molecular properties, since the adhesives of both orders have visibly different characteristics. A shotgun proteomic analysis was performed on the cement, excreted at the membranous base of specimens, where the products of the three genes sequenced in the gland were identified, validating their function as CPs. A principal component analysis (PCA) was performed, to cluster CPs into groups with similar amino acid composition. This analysis uncovered three CP groups, each characterised by similar residue composition, features in secondary structure, and some biochemical properties, including isoelectric point and residue accessibility to solvents. The similarity among proteins in each defined group was low despite comparable amino acid composition. PCA can identify putative adhesive proteins from NGS transcriptomic data regardless of their low homology. This analysis did not highlight significant differences in residue composition between homologous acorn and stalked barnacle CPs. The characteristics responsible for the structural differences between the cement of stalked and acorn barnacles are described, and the presence of nanostructures, such as repetitive homologous domains and low complexity regions, and repetitive ß-sheets are discussed relatively to self-assembly and adhesion.

The Barnacle Balanus improvisus as a Marine Model - Culturing and Gene Expression.

Barnacles are marine crustaceans with a sessile adult and free-swimming, planktonic larvae. The barnacle Balanus (Amphibalanus) improvisus is particularly relevant as a model for the studies of osmoregulatory mechanisms because of its extreme tolerance to low salinity. It is also widely used as a model of settling biology, in particular in relation to antifouling research. However, natural seasonal spawning yields an unpredictable supply of cyprid larvae for studies. A protocol for the all-year-round culturing of B. improvisus has been developed and a detailed description of all steps in the production line is outlined (i.e., the establishment of adult cultures on panels, the collection and rearing of barnacle larvae, and the administration of feed for adults and larvae). The description also provides guidance on troubleshooting and discusses critical parameters (e.g., the removal of contamination, the production of high-quality feed, the manpower needed, and the importance of high-quality seawater). Each batch from the culturing system maximally yields roughly 12,000 nauplii and can deliver four batches in a week, so up to almost 50,000 larvae per week can be produced. The method used to culture B. improvisus is, probably, to a large extent also applicable to other marine invertebrates with free-swimminglarvae. Protocols are presented for the dissection of various tissues from adults as well as the production of high-quality RNA for studies on gene expression. It is also described how cultured adults and reared cyprids can be utilized in a wide array of experimental designs for examining gene expression in relation to external factors. The use of cultured barnacles in gene expression is illustrated with studies of possible osmoregulatory roles of Na+/K+ ATPase and aquaporins.

Competing with barnacle cement: wetting resistance of a re-entrant surface reduces underwater adhesion of barnacles.

Surfaces with re-entrant topographies can repel liquids even of extremely low surface tension, almost independently of the material's inherent wettability. We show that this topography-based wetting resistance can also be applied to underwater applications, reducing the permanent adhesion of marine hardfouling organisms. Having combined a biofouling assay in the marine environment with microscopic analyses, we demonstrate how a synergistic effect of a soft silicone-based material with a re-entrant mushroom-shaped surface topography strongly increases the fouling release ability of such coatings compared with a smooth control made from the same material. Our coating inhibited the complete wetting of the solidifying glues produced by marine organisms, which resulted in a decreased contact area and, consequently, low adhesion. Our work suggests that topography-induced wetting resistance of surfaces may become a viable approach in preventing permanent adhesion of marine hardfouling organisms.

Purification and characterization of a hydroxynitrile lyase from Amygdalus pedunculata Pall.

Hydroxynitrile lyases (HNLs) are widely used in the asymmetric synthesis of cyanohydrins which are organic compounds used in the production of fine chemicals and pharmaceuticals, because these enzymes exhibit high catalytic efficiency and are very economical. In the present study, seeds of A. pedunculata Pall were identified as new potential source of HNLs. The HNL from A. pedunculata Pall (APHNL) was purified 138 fold and 4.20% yield with a specific activity of 661 U/mg. SDS-PAGE result showed the enzyme to be present as a monomer and the relative molecular mass determined by MALDI-TOF MS was 61 kDa. APHNL owned highest activity at pH 6.0 and at 60 °C temperature, showing activity up to 80 °C and stable up to 60 °C. APHNL has a Km of 0.5 mM, Vmax of 665.9 µmol mg-1 min-1, Kcat of 676.5 s-1 and Kcat/Km of 1353 s-1 mM-1 using mandelonitrile as substrate. Syntheses of (R)-mandelonitrile and (R)-2-Hydroxy-2-(3-phenoxy-phenyl)-acetonitrile were carried out using APHNL and molar conversion of (R)-mandelonitrile and (R)-2-Hydroxy-2-(3-phenoxy-phenyl)-acetonitrile were 90% and 98% with 94% and 93% ee, respectively. These results indicated that APHNL was an excellent biocatalyst and has very high potential for synthesis of enantiopure cyanohydrins.

Linking stable isotopes and biochemical responses in Balanus glandula under sewage influence.

In the present study, we analyzed the influence of untreated sewage exposure on carbon (δ13C) and nitrogen (δ15N) isotopic composition and several biochemical responses in the barnacle Balanus glandula. The main objective was to evaluate whether changes in stable isotopes signature do reflect biochemical sub-lethal effects in a sewage influence gradient. Stable isotopes analysis showed differences in isotope signatures between close sewage influence and distant sites, being δ13C signatures stronger than that of δ15N. Regarding biochemical effects, although organisms close to the effluent would be clearly exposed to contaminants (increased GST activity) the oxidative stress would not be too evident (peroxidases and ACAP not affected). The most affected physiological aspect was the digestive one, reflected in increased alkaline proteases and lipases activities. A clear relation between δ15N and GST activity was found, showing to δ15N as an indicator of potential exposure to chemical contaminants.

Toward understanding barnacle cementing by characterization of one cement protein-100kDa in Amphibalanus amphitrite.

Barnacles, as major fouling organisms, have attracted more attentions. It is no doubt that the study on cement proteins is required to illustrate the mechanism of barnacle cementing. A cement protein defined as Aa-cp100k was characterized from Amphibalanus amphitrite in this study. The amino acid sequence of Aa-cp100k was shown a high similarity to other three barnacles including Megabalanus rosa (Mr-cp100k), Tetraclita japonica formosana (Tj-cp100k) and Pollicipes pollicipes (Pp-cp100k). Moreover, the localization of Aa-cp100k in the vacuoles of cyprid ß secretory cells and the adult cement gland cells by immunofluorescence microscopy, indicating that Aa-cp100k existed in both cyprid and adult barnacle. Aa-cp100k from basal plate could be dissolved in urea buffer without high concentration of dithiothreitol (DTT), different from that in Megabalanus rosa, implying diverse possible roles of cp100k in cementing.

Serinolamides and Lyngbyabellins from an Okeania sp. Cyanobacterium Collected from the Red Sea.

NMR- and MS-guided fractionation of an extract of an Okeania sp. marine cyanobacterium, collected from the Red Sea, led to the isolation of four new metabolites, including serinolamides C (1) and D (2) and lyngbyabellins O (3) and P (4), together with the three known substances lyngbyabellins F (5) and G (6) and dolastatin 16 (7). The planar structures of the new compounds were determined using NMR and MS analyses. The absolute configurations of 1 and 2 were determined by Marfey's analysis of their hydrolysates. The absolute configuration of 3 was ascertained by chiral-phase chromatography of degradation products, while that of 4 was determined by comparison to 3 and 5. The cytotoxic and antifouling activities of these compounds were evaluated using MCF7 breast cancer cells and Amphibalanus amphitrite larvae, respectively. Compounds 3, 4, and 7 exhibited strong antifouling activity, and 3 and 7 were not cytotoxic. A structure-activity relationship was observed for the cytotoxicity of the lyngbyabellins with the presence of a side chain (4 is more active than 3) leading to greater activity. For the antifouling activity, the acyclic form without a side chain (3) was the most active.

Amyloid fibril aggregation: An insight into the underwater adhesion of barnacle cement.

Barnacles robustly adhere themselves to diverse submarine substrates through a proteinaceous complex termed the "barnacle cement". Previous studies have indicated that certain peptides derived from some barnacle cement proteins can self-assemble into amyloid fibrils. In this study, we assessed the self-assembly behavior of a full-length 19 kDa cement protein from Balanus albicostatus (Balcp19k) in different buffers. Results of Thioflavin T binding assay, transmission electron microscopy, and Fourier transform infrared spectroscopy suggested that the bacterial recombinant Balcp19k was able to aggregate into typical amyloid fibrils. The time required for the self-assembly process was close to that required for the complete curing of barnacle cement complex. Moreover, the solubility of Balcp19k amyloid deposits in guanidine hydrochloride and urea was same as that of the cured cement. These results indicated the inherent self-assembling nature of Balcp19k, implying that the amyloid fibril formation plays a critical role in barnacle cement curing procedure and its insolubility. Our results should be conducive to understanding barnacle underwater adhesion mechanisms and have implications in the development of new-generation antifouling techniques and in the designing of novel wet adhesives for biomedical and technical applications.

Comparative Exploration of the Structure-Activity Space of Cloned α-Like Octopamine Receptors from a Marine and a Terrestrial Arthropod.

The α-like octopamine receptors (OctR) are believed to be the evolutionary precursor to the vertebrate α2-adrenergic receptors (α2-ARs) based upon sequence similarity and the ability to interact with norepinephrine and a number of compounds that bind with high affinity to α2-ARs. Barnacles and fruit flies are two prominent model marine and terrestrial representatives of the Arthropoda phylum, and although α-like OctRs have been cloned from Balanus improvisus (BiOctR) and Drosophila melanogaster (DmOctR), little is known about the structure-activity space for these important species. A diverse panel of 22 probes spanning different structural classes were employed to interrogate the structure-activity of the BiOctR and DmOctR. While BiOctR and DmOctR exhibited similar functional profiles for mammalian biogenic amine G protein-coupled receptor agonists and antagonists, some ligands had dramatically different mechanisms of action. For instance, significant differences in the efficacy for some agonists were observed, including that vertebrate biogenic amines structurally related to octopamine acted as superagonists at the DmOctR but partial agonists at the BiOctR, and the two species diverged in their sensitivities to the α2-AR antagonist [3H]rauwolscine. Furthermore, sodium enhanced [3H]rauwolscine's interactions with the BiOctR, but not at a vertebrate α2-AR. Molecular mechanistic studies indicate that rauwolscine interacts with the BiOctR, DmOctR, and α2C-adrenergic receptor at an allosteric site. In addition, compounds that acted as agonists at a cloned α-like BiOctR also induced a hyperactivity response in Balanus cyprids mediated by the α-like OctR, suggesting that the receptor may serve as a higher throughput proxy for discovering compounds with potential cyprid deterrent properties.