Equal rates of bone healing and reduced surgical time with iliac crest allograft compared to autograft in medial opening wedge high tibial osteotomy: a randomized controlled clinical trial.

INTRODUCTION: Iliac crest autograft is frequently used to fill in bone defects after osteotomies. Nonetheless, surgery for bone autograft procurement is associated with morbidity and pain at the donor site. Alternatives to it have been explored, but there is no consensus to guide their application as a routine practice in several orthopedic procedures. Thus, this study was designed to compare the efficacy and safety between iliac crest autograft and allograft in medial opening wedge high tibial osteotomy. MATERIALS AND METHODS: Forty-seven patients with a symptomatic unilateral genu varum and an indication for high tibial osteotomy were randomly assigned to receive either autograft or allograft to fill the osteotomy site. Operative time, bone healing, and complication rates (delayed union, nonunion, superficial and deep infection, loss of correction, and hardware failure) were recorded after a one-year follow-up. Data were expressed as Mean ± Standard Deviation and considered statistically significant when p < 0.05. RESULTS: The time to radiologic union was similar between both groups (Allograft: 2.38 ± 0.97 months vs. Autograft: 2.45 ± 0.91 months; p = 0.79). Complication rates were also similar in both groups, with one infection in the allograft group and two in the autograft group, two delayed unions in the allograft group, and three in the autograft group. The operative time differed by 11 min between the groups, being lower in the allograft group (Allograft: 65.4 ± 15.1 min vs. Autograft: 76.3 ± 15.2 min; p = 0.02). CONCLUSION: Iliac crest allografts can be safely and effectively used in medial opening wedge high tibial osteotomy as it promotes the same rates of bone union as those achieved by autologous grafts, with the benefits of a shorter operative time. TRIAL REGISTRATION NUMBER: U1111-1280-0637 1 December 2022, retrospectively registered.

Exéresis de quiste nasopalatino y regeneración ósea / Excisão de cistos nasopalatinos e regeneração óssea / Nasopalatine cyst excision and bone regeneration

Introducción: El quiste nasopalatino es un quiste no odontogénico, ubicado dentro del conducto nasopalatino del maxilar, su diagnóstico en la mayoría de los casos es por hallazgo radiológico de rutina y en otros casos por la presencia de sintomatología; llegando a generar dolor, parestesia y signos visibles como deformaciones faciales. Descripción del caso: El objetivo de este artículo es la revisión de la literatura y presentación del caso de un paciente masculino de 38 años de edad, que acude a la consulta por presentar aumento de volumen en la maxila anterior, de dos años de evolución que presentó resultados favorables luego de la exéresis y colocación de injerto óseo. Consideraciones finales: El quiste nasopalatino representa menos del 5% de los quistes a nivel maxilar y su recurrencia es baja. Cuando se trata de un quiste de gran tamaño con destrucción del tejido óseo circundante, la mejor opción es la utilización de un injerto óseo dependiendo tanto de la biocompatibilidad, del sitio afectado y de los costos. Se considera como gold standard a la matriz ósea desmineralizada (DBX) debido a su capacidad de osteoinducción, osteoconducción y osteogénesis... (AU)

Introdução: O cisto nasopalatino é um cisto não odontogênico, localizado no interior do ducto nasopalatino da maxila, a lesao é descoberta na maior parte dos casos como um achado radiológico de rotina e em outros casos pela presença de sintomatologia; incluindo dor, parestesias e deformidades faciais. Descrição do caso: O objetivo deste artigo é revisar a literatura e apresentar o caso de um paciente masculino de 38 anos de idade que veio à clínica com um aumento volumétrico da região anterior da maxila, com uma evolução de dois anos, que apresentou resultados favoráveis após excisão e colocação de enxerto ósseo. Considerações finais: O cisto nasopalatino representa menos de 5% dos cistos maxilares e a recorrência é baixa. Quando se trata de uma grande lesão com destruição do tecido ósseo circundante, a melhor opção é a utilização de um enxerto ósseo dependendo da biocompatibilidade, do local afetado e dos custos. A matriz óssea desmineralizada (DBX) é considerado o material padrão para a reconstrução óssea da região afetada devido à sua capacidade de osteoindução, osteocondução e osteogénese... (AU)

Introduction: The nasopalatine cyst is a non-odontogenic cyst, located within the nasopalatine duct of the maxilla, its diagnosis in most cases is by routine radiological finding and in other cases by the presence of symptomatology; coming to generate pain, paresthesia and visible signs such as facial deformities. Case description: The objective of this article is to make a literature review and presentation of the case of a 38-year-old male patient, who comes to the consultation for presenting an increase in volume in the anterior maxilla, of two years of evolution that presented favorable results after excision and placement of bone graft. Final considerations: Nasopalatine cyst represents less than 5% of the cysts at maxillary level and its recurrence is low. When it is a large cyst with destruction of the surrounding bone tissue, the best option is the use of a bone graft depending on biocompatibility, the affected site and costs. Demineralized bone matrix (DBX) is considered the gold standard due to its capacity for osteoinduction, osteoconduction and osteogenesis... (AU)

Reconstruction of congenital pseudarthrosis of the radius with a vascularized tibial periosteal transplant: A case report.

Congenital pseudarthrosis of the forearm poses a considerable challenge because of its rarity. The objective of this report is to introduce a novel surgical technique for its treatment. Here, we document a case of congenital pseudarthrosis of the radius in a 3-year-old boy diagnosed with type-1 neurofibromatosis. The surgical treatment involved the excision of approximately 9 cm of native radial periosteum and a bifocal radius osteotomy, which was supplemented with a vascularized tibial periosteal transplant to facilitate bone healing. Anastomosis between the anterior tibial vessels and radial vessels was performed. No immediate or late postoperative complications were observed. After 3 weeks, a robust callus formation was observed, and during a follow-up examination 3 years and 4 months later, a wide range of active forearm rotation was noted. This report suggests that vascularized periosteal flaps show promise as a viable treatment option for congenital pseudarthrosis of the forearm. They offer an alternative to vascularized fibular grafts or single-bone forearm constructs.

Comprehensive clinical and histological evaluation of bovine hydroxyapatite bone graft with polypropylene membrane versus leukocyte- and platelet-rich fibrin for alveolar preservation after tooth extraction.

BACKGROUND: Osseointegrated implant placement in the ideal prosthetic position necessitates a sufficient residual alveolar ridge. Tooth extraction and the subsequent healing process often lead to bony deformities, characterized by a reduction in alveolar ridge height and width, resulting in unfavorable ridge architecture for dental implant placement. Several materials, including allografts, alloplastics, xenografts, and autogenous bone, are commonly used to address these concerns. In this context, leucocyte- and platelet-rich fibrin (L-PRF) emerges as a promising solution. METHODS: This case report aims to compare the clinical and histological efficacy of bovine hydroxyapatite bone graft covered with polypropylene membrane (BHAG-PM) and leucocyte- and platelet-rich fibrin (L-PRF) in preserving dental alveoli following tooth extraction. Extraction, graft placement in the alveoli, and the anterior border between extracted elements were performed for both treatment groups. RESULTS: Up to 24 months of follow-up revealed satisfactory and comparable clinical and histological outcomes. These results suggest that both BHAG-PM and L-PRF effectively promote alveolar preservation, paving the way for ideal implant placement. CONCLUSIONS: In general, bone-substitute materials are effective in reducing alveolar changes after tooth extraction. Xenograft materials should be considered as among the best of the available grafting materials for alveolar preservation after tooth extraction. Both techniques effectively preserve the alveolar bone and facilitate the placement of osseointegrated implants in ideal positions, paving the way for successful oral rehabilitation.

Analysis of the Chemical Composition, Morphological Characterization, and Porosimetry of Allograft and Comparison with Xenograft for Dental Applications / Análisis de la Composición Química, Caracterización Morfológica y Porosimetría de Aloinjerto y Comparación con Xenoinjerto para Aplicaciones Odontológicas

SUMMARY: Tissue engineering aims to fabricate a scaffold that exhibits a suitable surface topography for a desired cellular response. Therefore, a study analyzing the characteristics of bone grafts is important for future research directions. This work aims to analyze the physical-chemical characteristics of commercially available bone grafts of human and bovine origin for dental use, using morphological analysis of the surface and chemical composition by variable pressure scanning electron microscope (VP-SEM) and energy-dispersive x-ray (EDX) spectrometry. In addition, pore diameter and surface area were analyzed by degassing method using a porosimeter, and particle size by laser diffraction. The analyzed allograft and xenograft particles differ in morphological characteristics and chemical composition. The allograft particles present a cuboidal and prismatic geometric morphology with angled edges and the absence of macropores. On the contrary, the xenograft particles present an irregular morphology with macropores in their structure. There is a statistically significant difference in C, P, and Ca between the xenograft and allografts (p < 0,05). The analyzed composition of allografts showed mainly the presence of C and O. In contrast, the composition of the xenograft was mainly Ca. These differences could influence the osteogenic properties of allografts and xenografts. This analysis provides basic information to understand the physicochemical properties of allografts and xenografts that facilitate cell-graft interaction.

La ingeniería de tejidos tiene como objetivo fabricar un andamio que muestre una topografía de superficie adecuada para una respuesta celular deseada. Por tanto, un estudio que analice las características de los injertos óseos es importante para futuros enfoques de investigación. Este trabajo tiene como objetivo analizar las características físico-químicas de injertos óseos de origen humano y bovino disponibles comercialmente para uso odontológico, mediante análisis morfológico de la superficie y composición química mediante microscopio electrónico de barrido de presión variable (VP-SEM) y x-dispersivo de energía. espectrometría de rayos (EDX). Además, el diámetro de los poros y el área superficial se analizaron mediante el método de desgasificación utilizando un porosímetro y el tamaño de las partículas mediante difracción láser. Las partículas de aloinjerto y xenoinjerto analizadas difieren en características morfológicas y composición química. Las partículas del aloinjerto presentan una morfología geométrica cúbica y prismática con bordes angulados y ausencia de macroporos. Por el contrario, las partículas de xenoinjerto presentan una morfología irregular con macroporos en su estructura. Existe una diferencia estadísticamente significativa en C, P y Ca entre el xenoinjerto y los aloinjertos (p < 0,05). La composición analizada de los aloinjertos mostró principalmente la presencia de C y O. Por el contrario, la composición del xenoinjerto fue principalmente Ca. Estas diferencias podrían influir en las propiedades osteogénicas de los aloinjertos y xenoinjertos. Este análisis proporciona información básica para comprender las propiedades fisicoquímicas de aloinjertos y xenoinjertos que facilitan la interacción célula-injerto.

[Use of frozen osteochondral allograft for the treatment of cartilage defects of the knee. Results at seven-year follow-up]. / Injerto osteocondral congelado para tratamiento de lesiones de cartílago de rodilla: resultados a 7 años de seguimiento.

INTRODUCTION: Knee osteochondral lesions represent a frequent pathology within young active patients. One possible indication for severe lesions or in case of impossibility of harvesting an autograft is the use of fresh frozen allograft. The objective of this study was to retrospectively analyze functional results and failure rate after osteochondral transplants using fresh frozen allografts. METHODS: We analyzed data from patients who underwent knee osteochondral transplant using mosaicplasty technique with fresh frozen allografts at our institution between 2014 and 2019. We included those patients with at least two-year follow-up. Demographic characteristics such as age at the moment of intervention and size of the defect were included. Functional results were assessed using pre and postoperative Lysholm and IKDC scores. Patients who underwent a knee replacement were considered failures. RESULTS: Twenty-five patients were included. The median age was 43.5 years (IQR 29-50), 45% were female and the mean follow-up was 83 months (SD 54.6). Mean osteochondral defect size was 4 cm2. Mean pre and postoperative Lysholm scores were 39 (SD 19.3) and 82 (SD 15.4) respectively (p < 0.01). Mean pre and postoperative IKDC scores were 42 (SD 13.8) and 60 (SD 13.5) respectively (p < 0.01). Five patients (20%) underwent a knee replacement afterwards and were considered failures. DISCUSSION: Our results after a mean seven-year follow-up evidenced an overall improvement in functional scores and a failure rate of 20%. Osteochondral transplant using fresh frozen allografts is a reliable and feasible treatment for patients with large osteochondral defects.

Introducción: Las lesiones osteocondrales de rodilla son una afección frecuente en jóvenes. Los trasplantes alogénicos usando injerto congelado se presentan como una opción de tratamiento en pacientes con lesiones grandes o sin zona dadora. Este trabajo buscó analizar retrospectivamente los resultados funcionales y la tasa de falla de los trasplantes osteocondrales con injerto cadavérico congelado. Métodos: Se incluyeron pacientes sometidos a trasplantes osteocondrales de rodilla con injerto cadavérico congelado en nuestra institución, entre 2014 y 2019, con dos años de seguimiento mínimo. Variables evaluadas: edad al momento de la intervención, escalas funcionales International Knee Documentation Committee (IKDC) y Lysholm pre y post operatorios, complicaciones y tasa de falla. Resultados: Incluimos 25 pacientes. La edad media fue de 43.5 años (RIQ 29-50), 45% fueron mujeres y el seguimiento promedio fue de 83 meses (DS 54.6). El tamaño promedio del defecto osteocondral fue de 4 cm2. La escala de Lysholm promedio pre y postoperatorio fue de 39 (DS 19.3) y 82 (DS 15.4) respectivamente (p < 0.01). El IKDC promedio pre y postoperatorio fue de 42 (DS 13.8) y 60 (DS 13.5) respectivamente (p < 0.01). La tasa de falla fue del 20% (n=5). Discusión: Los pacientes presentaron una mejoría postoperatoria evidenciada en los resultados funcionales, y una tasa de falla del 20%. El uso de trasplante osteocondral congelado se presenta como un recurso útil para el tratamiento de lesiones condrales graves.

Survival analysis of dental implants placed in horizontally severely resorbed maxillae after reconstruction with xenogeneic graft: a case series.

PURPOSE: To evaluate the survival rates of dental implants with a hybrid macrostructure and the surface biomimetically coated with nanohydroxyapatite, placed in horizontally atrophic maxillae previously submitted to the guided bone regeneration (GBR) procedure, associated with the use of a deproteinized bovine bone graft (DBB). METHODS: Twenty-five patients who received 196 implants were involved in this study. First, these patients were submitted to GBR procedures and maxillary sinus lift, where DBB was used as the grafting material. The dental implants were placed after a minimum period of 6 months of the grafting procedures. The patients were followed up every six months and clinical/radiographic examinations were performed to assess the implants, using the following indicators as a reference: (1) Absence of mobility; (2) Absence of pain. Data about the age, surgery time, smoking status, implant size, and time between the grafting procedure and implant placement were correlated with implant failures. RESULTS: Twelve implants failed, generating a survival rate of 94.23%. None of the variables analysed correlated with the implant failures. CONCLUSION: Implants with a hybrid macrostructure and surface biomimetically coated with nanohydroxyapatite present good survival rates in horizontally atrophic maxillae grafted with DBB.

Long-term survival and success rate of dental implants placed in reconstructed areas with extraoral autogenous bone grafts: A systematic review and meta-analysis.

OBJECTIVE: To evaluate the long-term survival and success rates of implants placed in reconstructed areas using microvascularized or non-microvascularized extraoral bone grafts. MATERIALS AND METHODS: An electronic search was performed in five databases and in gray literature for articles published until June, 2023. The eligibility criteria comprised observational studies (prospective or retrospective) and clinical trials, reporting survival and success rates of implants placed in extraoral bone grafts. A meta-analysis (implant failure) was categorized into subgroups based on the type of bone graft used. The risk of bias within studies was assessed using the Newcastle-Ottawa Scale. RESULTS: Thirty-one studies met the inclusion criteria. The mean follow-up time was 92 months. The summary estimate of survival rate at the implant level were 94.9% (CI: 90.1%-97.4%) for non-vascularized iliac graft, 96.5% (CI: 91.4%-98.6%) for non-vascularized calvaria graft, and 92.3% (CI: 89.1%-94.6%) for vascularized fibula graft. The mean success rate and marginal bone loss (MBL) were 83.2%; 2.25 mm, 92.2%; 0.93 mm, and 87.6%; 1.49 mm, respectively. CONCLUSIONS: Implants placed in areas reconstructed using extraoral autogenous bone graft have high long-term survival rates and low long-term MBLs. The data did not demonstrate clinically relevant differences in the survival, success, or MBL of grafts from different donor areas or with different vascularization. This systematic review was registered in INPLASY under number INPLASY202390004.

Biological parameters for quality evaluation of allografts from the Brazilian National Institute of Traumatology and Orthopedics tissue bank.

Bone allografts are clinically used in a variety of surgical procedures, and tissue banks are responsible for harvesting, processing, quality testing, storing, and delivering these materials for transplantation. In tissue banks, the bone is processed for the removal of all organic content, remaining only the tissue structure (scaffold). However, several studies have shown that even after using different processing methods, viable cells, functional proteins, and DNA may still persist in the tissue, which constitute the main causes of graft rejection. Therefore, the objective of this study was to establish techniques and biological parameters for quality validation of allografts. To this end, we propose the use of 3 combined methods such as microscopy, histology, and molecular biology techniques to evaluate the quality of allografts harvested and processed by the Brazilian National Institute of Traumatology and Orthopedics (INTO) tissue bank according to the donation criteria of the Brazilian National Health Surveillance Agency and the Brazilian National Transplant System. Bone fragments from different processing stages showed no viable cells on histology, an intact extracellular matrix on scanning electron microscopy, and gradual reduction in DNA amount. Different techniques were used to demonstrate the quality of allografts produced by the INTO tissue bank and to establish biological parameters for ensuring the safety and quality of these products. Future studies need to be undertaken to assess and validate the efficacy of the decellularization process in larger bone grafts with diverse architectural configurations.

Clinical outcomes following atrophic alveolar ridge reconstruction using collagenated xenogeneic bone block or autogenous bone block: One-year follow-up of a randomized controlled clinical.

AIM: This investigation aimed to evaluate the 1-year survival of implants placed after staged lateral alveolar ridge augmentation using equine-derived collagenated xenogeneic bone blocks (CXBBs) or autogenous bone block (ABB). MATERIALS AND METHODS: Fifty patients who underwent lateral augmentation in a previous trial were included. The primary outcome measure was implant survival at the 1-year follow-up, and secondary outcomes included implant success, peri-implant clinical and volumetric parameters, pink aesthetic scores (PES) and patient-reported outcome measures. Data analysis involved Fisher's exact test, the Mann-Whitney U-test and the Wilcoxon signed-rank test. RESULTS: In this study, no late implant failures were observed. The cumulative survival rates were 78.6% for the CXBB group and 90.9% for the ABB group, with no difference between the groups. Similarly, the success rates were 53.6% and 63.6%, respectively, showing no significant difference. Peri-implant clinical and volumetric parameters indicated the presence of healthy peri-implant tissues surrounding implants placed in both CXBB- and ABB-augmented sites. PES were 8.5 and 11.0 for implants placed in CXBB- and ABB-augmented sites, respectively. Furthermore, patient satisfaction rates were high and similar between the groups. CONCLUSIONS: Dental implants placed in both CXBB- and ABB-augmented ridges demonstrated no statistically significant differences in clinical, volumetric and aesthetic outcomes, along with high patient satisfaction rates.

The polymicrobial infection affects the infection recurrence rate (not failure) in treating femoral and tibial bone defects with the Masquelet technique-a comparative retrospective analysis of 54 patients with mono- and polymicrobial infections.

INTRODUCTION: This study evaluated whether polymicrobial infection affects reoperation rates due to infection recurrence and treatment failure with the Masquelet technique in infected posttraumatic segmental bone defects of the femur and tibia. METHODS:  We retrospectively analyzed patients treated between 2012 and 2021 in two trauma referral centers. We evaluated demographic data, injury, treatment, infection recurrence, failures, and bone healing rates according to whether the infection was mono- or polymicrobial. After uni-bivariate analysis between patients with polymicrobial and monomicrobial infection, we identified the variables associated with infection recurrence and failure through multivariate analysis. RESULTS:  We analyzed 54 patients, 30 (55.55%) with tibial and 24 (44.44%) femoral segmental bone defects, with a mean follow-up of 41.7 ± 15.0 months. Forty-four (81.48%) presented monomicrobial, and 10 (18.51%) polymicrobial infections. Comparatively, the need for soft tissue reconstruction and the infection recurrence rate was significantly higher in patients with polymicrobial infections. There was no significant difference in the failure rate (20 vs. 6.81% p = 0.23). Multivariable logistic regression analysis identified the polymicrobial infection as the only independent variable associated with infection recurrence (Odds Ratio = 11.07; p = 0.0017). CONCLUSION:  Our analysis suggests that polymicrobial infection is associated with a higher risk of infection recurrence in treating the femur and tibia segmental bone defects with the Masquelet technique. This information can help surgeons to inform patients about this and give them a realistic expectation of the outcome and the possibility of reoperation.

The impact of synthetic bone grafting for tissue regeneration: an in vivo study

Aims: This study aimed to examine the biological response of synthetic nanocomposite material on canine mandibular bone. Methods: Nine healthy adult male local breed dogs aged 12 to 18 months and weighing 10.2 to 15.2 kg were used in the study. Based on healing intervals of 1 and 2 months, the dogs were divided into 2 groups. Each group had 3 subgroups with 3 dogs each. The division was based on the grafting material used to fill the created defect: an empty defect (Control-ve), Beta-Tricalcium Phosphate, and nanocomposite (Beta-Tricalcium Phosphate and nanosilver 1%) . Surgery started after the dogs were anaesthetized. The surgical procedure began with a 5 cm parallel incision along the mandible's lower posterior border. After exposing the periosteum, a three 5mm-diameter, 5-mmdeep critical-size holes were made, 5mm between each one. Each group's grafting material had independent 3 holes. The defects were covered with resorbable collagen membranes followed by suturing of the mucoperiosteal flap. Results: Total densitometric analysis showed no significant differences between groups at 1-month intervals, with the nanocomposite group having a higher mean rank (165.66± 31.21) in comparison to other groups while at 2 months intervals that there was a highly significant difference between three groups as the P-value was (0.000) with the nanocomposite group having a higher mean rank (460.66± 26.40). Conclusions: In the current study, the use of nanocomposites improved osteoconductivity by accelerating new bone formation. Moreover, the encorporation of nanosilver enhanced growth factor activity. These attributes make nanocomposites a promising material for enhancing the bone healing process

Avaliação in vitro da fotobiomodulação das SHEDs semeadas em um scaffold de osso bovino mineral desproteinizado e colagenado / In vitro evaluation of photobiomodulation of Stem cells from human exfoliated deciduous teeth seeded in a deproteinized bovine bone mineral with 10% collagen scaffold

A regeneração óssea é um processo importante para oferecer tratamentos reconstrutivos mais rápidos e eficientes, no entanto, limitações técnicas continuam sendo um desafio, assim como a velocidade de formação e maturação óssea. Portanto, as pesquisas têm se voltado para técnicas alternativas na regeneração óssea e atualmente, a engenharia tecidual tem estudado o uso de células tronco para tratamento de perdas ósseas. A eficácia e a taxa de sucesso das diferentes técnicas e scaffolds foram avaliadas. Porém, há pouca informação sobre a eficácia combinada de carreadores xenógenos, células tronco de dentes decíduos esfoliados humano (SHEDs) e a terapia de fotobiomodulação (PBMT) na regeneração de defeitos ósseos. Baseado em estudos prévios, a proposta deste estudo foi avaliar, in vitro, a ação da PBMT, uma técnica com propriedades imunomodulatórias, angiogênicas e com capacidade de aumentar a adesão, proliferação e migração celular ao biomaterial tridimensional de osso bovino mineralizado desproteinizado com colágeno suíno a 10% (OBMDC), semeado com SHEDs, para acelerar e aumentar a taxa de formação óssea. Foi utilizado o laser de diodo, com comprimento de onda de 660nm; 40mW de potência; 3J/cm2 de densidade de energia e 2 segundos de tempo de aplicação após 24h e 72h do plaqueamento. Para avaliar a proliferação, as SHEDs foram descongeladas cultivadas, plaqueadas, semeadas no scaffold de OBMDC e divididas em 8 grupos: 1) Controle 15%; 2) Controle 5%; 3) OBMDC 15%; 4) OBMDC 5%; 5) Laser 15%; 6) Laser 5%; 7) OBMDC-L 15%; 8) OBMDC-L 5% e a análise de proliferação foi realizada por MTT. Para avaliar diferenciação celular, as amostras foram divididas em quatro grupos: 1) Grupo Controle clonogênico: SHEDs cultivadas em meio clonogênico; 2) Grupo Controle mineralizante: SHEDs cultivadas em meio mineralizante; 3) Grupo laser clonogênico: SHEDs cultivadas em meio clonogênico com aplicação de laser; 4) Grupo laser mineralizante: SHEDs cultivada em meio mineralizante com aplicação de laser. Para o grupo laser, as células foram irradiadas no período de 24h e 72h após o plaqueamento e todas as amostras fixadas para análise da formação dos depósitos de cálcio, através do ensaio de vermelho de alizarina após 23 dias de cultivo celular e os dados foram tratados estatisticamente (p0,05). Para avaliar a morfologia celular das SHEDs em todos os grupos, utilizou-se o microscópio invertido de fase em 24h e 72h após o plaqueamento. O grupo OBMDC-L 5% SFB em 72h, demonstrou maior proliferação celular que o grupo Controle (p=0.0286). O grupo laser no meio mineralizante apresentou maior formação de depósito de matriz mineralizada em comparação ao grupo controle em meio clonogênico, controle em meio mineralizante e laser em meio clonogênico (p<0,0001). Considerando as condições experimentais deste estudo, concluiu-se que, in vitro, as SHEDs, semeadas em scaffold OBMDC, proliferaram mais após 2 aplicações de PBMT e houve diferenciação osteogênica das células após 23 dias em meio mineralizante.

Rehabilitación implanto protésica en paciente con injerto mandibular de larga data / Implant-prosthetic rehabilitation in a patient with a longstanding mandibular graft / Reabilitação protética com implantes em pacientes com enxerto mandibular de longa data

En la actualidad es cada vez más frecuente la consulta de pacientes que siendo sometidos en edades tempranas a cirugías de extirpación tumoral y posterior reconstrucción con injertos presentan problemas tanto funcionales como estéticos, el uso de prótesis implantosoportadas mejora la calidad de vida, pero al mismo tiempo representan un desafío por la baja disponibilidad ósea. Se presenta un caso clínico de rehabilitación protésica implantosoportada en una paciente con gran déficit óseo mandibular como consecuencia de le extirpación de una neoplasia y posterior injerto de costilla. Se colocaron 2 implantes osteointegrados en hueso remanente y rehabilitación con prótesis removible sostenida a una barra colada. Por ser un tratamiento poco invasivo y conservador fue aceptado fácilmente por la paciente y la mejora tanto en la estética como en la función fue notoria.

Nowadays, it is becoming more and more frequent to see patients who underwent surgery for tumor removal and subsequent reconstruction with grafts at an early age, presenting both functional and esthetic problems. The use of implant-supported prostheses improves the quality of life, but at the same time represents a challenge due to the low availability of bone. A clinical case of implant-supported prosthetic rehabilitation is presented in a patient with a great mandibular bone deficit as a consequence of the removal of a neoplasm and subsequent rib graft. Two osseointegrated implants were placed in the remaining bone and rehabilitation with a removable prosthesis supported by a cast bar. Being a minimally invasive and conservative treatment, it was easily accepted by the patient and the improvement in both esthetics and function was notorious.

Atualmente, são cada vez mais frequentes os pacientes submetidos à cirurgia de remoção de tumores e posterior reconstrução com enxertos em idade precoce que apresentam problemas funcionais e estéticos. O uso de próteses implanto-suportadas melhora a qualidade de vida, mas, ao mesmo tempo, representa um desafio devido à baixa disponibilidade de osso. Apresentamos um caso clínico de reabilitação protética implanto-suportada em um paciente com grande déficit ósseo mandibular em consequência da remoção de uma neoplasia e posterior enxerto de costela. Dois implantes osseointegrados foram colocados no osso remanescente e a reabilitação foi feita com uma prótese removível suportada por uma barra de gesso. Por se tratar de um tratamento minimamente invasivo e conservador, foi facilmente aceito pelo paciente e a melhora na estética e na função foi perceptível.

Combination of leukocyte and platelet-rich fibrin and demineralized bovine bone graft enhanced bone formation and healing after maxillary sinus augmentation: a randomized clinical trial.

BACKGROUND AND OBJECTIVE: The resorption of alveolar ridge bone and maxillary sinus pneumatization are challenges to implant-supported prosthetic rehabilitation. Bone regeneration using bone substitutes and growth factors are alternatives for maxillary sinus augmentation (MSA). Therefore, we sought to evaluate the effects of the association between leukocyte and platelet-rich fibrin (L-PRF) and deproteinized bovine bone mineral (DBBM) in MSA procedures. MATERIALS AND METHODS: Thirty-six maxillary sinuses from 24 individuals were included in this randomized clinical trial. The maxillary sinuses were randomly grafted with LPRF and DBBM (test group) or grafted only with DBBM (positive control). Dental implants were installed in the test group following two periods of evaluation: after 4 (DBBM+LPRF4) and 8 (DBBM+LPFR8) months of sinus graft healing, while the control group received implants only after 8 months. Cone beam computed tomography (CBCT) was taken 1 week after surgery (T1) and before implant placement (T2). Bone samples were collected during implant placement for histomorphometric and immunohistochemical (IHC) analysis. The primary implant stability was assessed by resonance frequency analysis. RESULTS: CBCT analysis demonstrated a significant decrease in bone volume from T1 to T2 in all groups without differences among them. Histologically, the test group showed significantly increase in bone neoformation in both periods of evaluation (LPRF+DBBM4: 44.70±14.01%; LPRF+DBBM8: 46.56±12.25%) compared to the control group (32.34±9.49%). The control group showed the highest percentage of residual graft. IHC analysis showed increased staining intensity of osteocalcin (OCN), vascular endothelial growth factor (VEGF), and runt related transcription factor 2 (RUNX-2) in LPRF+DBBM4 group, and osteopontin (OPN) in the L-PRF+DBBM8. Primary implant stability was successfully achieved (above 60 in implant stability quotient) in all the evaluated groups. CONCLUSION: Combination of L-PRF and DBBM increased and accelerated new bone formation allowing early implant placement probably due to the higher protein expression of RUNX2, VEGF, OCN, and OPN. These data suggest that the use of L-PRF might be an interesting alternative to use in combination with DBBM for augment the maxillary sinuses allowing the installation of appropriate length implants in shorter period of time. CLINICAL RELEVANCE: This study showed improvement in bone neoformation and accelerated healing when associating L-PRF and DBBM for maxillary sinus augmentation procedures. TRIAL REGISTRATION: This study was registered before participant recruitment in Brazilian Registry of Clinical Trials (ReBEC - RBR-95m73t).

Bibliometric analysis of the 100 most cited articles on bone grafting in dentistry.

AIM: This bibliometric study analyzed the characteristics of the 100 most cited articles on bone grafts in dentistry. MATERIALS AND METHODS: A database search was performed on the Web of Science Core Collection using a specific search strategy. Scopus and Google Scholar were also consulted for citation comparisons. Data extracted included: title, citation metrics, publication year, journal, study design, graft material, surgical technique, authors, institution, and country. Bibliometric networks were generated using VOSviewer. RESULTS: The identified articles were published between 1991 and 2019. Citation counts ranged from 120 to 1161 (mean: 240, 30). Clinical Oral Implants Research was the most cited journal (5175 citations; 25/100). Xenogeneic bone graft material was the most frequently used (5130 citations; 22/100). Europe had 62 articles (14,604 citations), and the United States was the most prominent country (5209 citations; 22/100). The University of Bern had the highest number of citations (2565 citations; 13/100), with Buser D as the author with the largest number of articles (2648 citations; 12/100). CONCLUSION: This study shows the scientific progress on bone grafts in dentistry. The use of xenogeneic grafts for horizontal and/or vertical ridge augmentation was the most prominent trend.

360-degree Arthroscopic Management of Scaphoid Pseudarthrosis: Description of Technique and Indications.

Nonunion remains one of the main complications of scaphoid fractures, with no consensus being reached as to the best surgical technique for scaphoid pseudoarthrosis. Thus, different types of procedures for bone stability and biological stimulus for consolidation have been described. The use of arthroscopy for scaphoid pseudoarthrosis has advantages as it allows for treating associated injuries, preserving wrist proprioception by minimizing damage to the joint capsule and ligaments and not deteriorating the already fragile scaphoid vasculature, leading to a quick recovery. Arthroscopy was initially indicated for stable scaphoid pseudoarthroses, being used in all patterns of this condition, including unstable ones and those with flexion collapse. However, most scientific articles describe the use of arthroscopy only through the dorsal portals, creating technical difficulty in complete debridement of the site of pseudarthrosis and in placing bone graft. This study describes the 360-degree technique, which standardizes arthroscopy in scaphoid pseudoarthrosis treatment, allowing, with the use of dorsal, volar, and radial portals, direct approach to the entire circumference of the nonunion site, facilitating the debridement of the injury site, the correction of the scaphoid deformity, and the placement of a graft directly on the site of the defect, mainly in its volar region after correction of the flexion deformity. The 360-degree technique aims to help and standardize the arthroscopic procedure for scaphoid pseudarthrosis, creating a routine with defined surgery stages. Additional portals allow complete access to the entire nonunion site and better positioning of the bone graft under direct view.

Comparative analysis of cancellous graft and cortico-cancellous graft in osteosynthesis of scaphoid pseudoarthrosis with plate.

INTRODUCTION: Scaphoid is the most fractured carpal bone, with a 5-10% nonunion rate. Treatment challenges include choosing the implant and graft that best corrects humpback deformity and carpal malalignment with higher chances of bony healing. OBJECTIVE: Compare cortico-cancellous and cancellous grafts between two groups of patients treating scaphoid nonunion with locking plates using autologous bone graft and evaluate bone healing rates and radiographic, tomographic, and functional parameters before and after surgery. METHODS: Non-randomized prospective study including 20 cases of scaphoid nonunion. Groups were divided into Group A (ten patients treated with cortico-cancellous iliac graft) and Group B (ten patients treated with cancellous iliac graft). Patients underwent pre- and postoperative radiographs, computed tomography, and functional evaluation. RESULTS: In postoperative analysis, Group A showed a statistically significant difference in intrascaphoid angle (p = 0.002) and scapholunate angle (p = 0.011) correction when comparing the pre- and postoperative periods. Group B showed a statistically significant difference in intrascaphoid angle (p = 0.002) and scapholunate angle correction (p = 0.0018), grip strength (p = 0.002), and tip pinch strength (p = 0.001) when comparing the pre- and postoperative periods. By comparing both groups, Group B showed a statistically significant difference in intrascaphoid angle correction (p = 0.002), grip strength (p = 0.002), tip pinch strength (p = 0.002), and radial deviation (p = 0.0003). There was no statistical difference when comparing bony healing between groups. CONCLUSION: Scaphoid nonunion treatment with a locking plate was effective, showing a high bony healing rate and improved carpal alignment in imaging tests for both graft types. However, results for intrascaphoid angle correction, grip strength, tip pinch strength, and radial deviation were better in Group B. LEVEL OF EVIDENCE: IV, case series.

Reconstrução óssea de defeito crítico com a utilização de tela de titânio: relato de caso / Bone reconstruction of a critical defect using titanium mesh: case report / Reconstrucción ósea de un defecto crítico con malla de titanio: reporte de caso

Introdução: O uso de membranas de barreira de exclusão de epitélio para regeneração óssea guiada tem sido apresentado na literatura como abordagem de tratamento bem sucedida, essas barreiras irão impedir a incorporação de células de tecidos moles no enxerto ósseo ou no es paço criado pelo defeito e permitir que apenas as células osteogênicas estejam presentes. Relato de caso: Trata-se de um caso clinico de um paciente que evoluiu com perda óssea significativa por lesão Endo-periodontal levando a perda dentaria, para a reabilitação com implantes se fez necessário uma reconstrução de um defeito crítico com a utilização de tela de titânio para arcabouço ósseo de mistura de enxerto autógeno e biomaterial e recobrimento com membrana de colágeno, o enxerto autógeno foi removido de área doadora na mandíbula e utilizado de forma particulada. Conclusão: As telas de titânio apresentam viabilidade e previsibilidade no aumento ósseo vertical, horizontal e tridimensional em decorrência da sua ampla aplicabilidade, elasticidade, plasticidade adequadas e boas propriedades mecânicas. Avanços na diminuição de suas taxas de exposição e risco de complicações no período de cicatrização melhoram a cada dia a previsibilidade da técnica, bem como a associação com outros materiais como os hemoderivados... (AU)

Introduction: The use of epithelial exclusion barrier membranes for guided bone regeneration has been presented in the literature as a successful treatment approach, these barriers will prevent the incorporation of soft tissue cells into the bone graft or the space created by the defect and allow that only osteogenic cells are present. Case report: This is a clinical case of a patient who evolved with significant bone loss due to an endo-periodontal lesion leading to tooth loss, for rehabilitation with implants it was necessary to reconstruct a critical defect using mesh titanium for bone framework of mixture of autogenous graft and biomaterial and covering with collagen membrane, the autogenous graft was removed from the donor area in the mandible and used in a particulate form. Conclusion: Titanium meshes are viable and predictable in vertical, horizontal and three-dimensional bone augmentation due to their wide applicability, adequate elasticity and plasticity, good mechanical properties. Advances in reducing their exposure rates and risk of complications during the healing period improve the predictability of the technique every day, as well as the association with other materials such as blood products... (AU)

Introducción: El uso de membranas de barrera de exclusión epitelial para la regeneración ósea guiada se ha presentado en la literatura como un enfoque de tratamiento exitoso, estas barreras evitarán la incorporación de células de tejido blando al injerto óseo o el espacio creado por el defecto y permitirán que solo presencia de células osteogénicas. Reporte de caso: Este es un caso clínico de un paciente que evolucionó con una pérdida ósea importante debido a una lesión endo-periodontal que lo llevó a la pérdida de un diente, para rehabilitación con implantes fue necesario reconstruir un defecto crítico utilizando malla de titanio para armazón óseo de mezcla de injerto autógeno y biomaterial y cubriendo con membrana de colágeno, el injerto autógeno se extrajo del área donante en la mandíbula y se usó en forma de partículas. Conclusión: Las mallas de titanio son viables y predecibles en el aumento óseo vertical, horizontal y tridimensional debido a su amplia aplicabilidad, adecuada elasticidad y plasticidad, buenas propiedades mecánicas. Los avances en la reducción de sus tasas de exposición y riesgo de complicaciones durante el periodo de cicatrización mejoran día a día la predictibilidad de la técnica, así como la asociación con otros materiales como los hemoderivados... (AU)

Radiographic outcomes of ridge reconstruction with autogenous bone block versus collagenated xenogeneic bone block: A randomized clinical trial.

AIM: To compare, at different levels from the alveolar crest, the radiographic outcomes of equine-derived collagenated xenogeneic bone blocks (CXBB) and autogenous bone blocks (ABB) used for lateral alveolar ridge augmentation. MATERIALS AND METHODS: Sixty-four patients with tooth gaps in atrophic alveolar ridges with ≤4 mm were randomly assigned to lateral augmentation using CXBB or ABB. The lateral bone thickness (LBT) was measured 2, 4, 6, 8, and 10 mm below the alveolar crest using CBCT scans obtained before augmentation surgery and at 30 weeks, prior to implant placement. Statistical analysis was performed using Shapiro-Wilk, Fisher's exact, Mann-Whitney, and Wilcoxon signed-rank tests. RESULTS: Both CXBB and ABB resulted in significant total and buccal LBT gains at 2, 4, 6, 8, and 10 mm. LBT gains were similar between CXBB- and ABB-augmented sites, except for greater buccal LBT gains at 8 mm at CXBB-augmented sites. While ABB-augmented sites gained vertical bone height, CXBB-treated sites suffered vertical bone loss (CXBB: -0.16 mm; ABB: 0.38 mm, p < .0009). CONCLUSIONS: CXBB and ABB were both associated with significant and similar LBT gains at 30 weeks.