[Application of microwave vacuum drying with process management in extract drying of personalized traditional Chinese medicine preparations].

Extracts are important intermediates in the production of traditional Chinese medicines preparations. The drying effect of extracts will directly affect the subsequent production process and the quality of the preparation. To meet the requirements of high drug loading, short time consumption, and simple production process of personalized traditional Chinese medicine preparations, this study explored the application of multi-program microwave vacuum drying process in the extract drying of personalized traditional Chinese medicine preparations. The influencing factors of microwave vacuum drying process were investigated for 5 excipients and 40 prescriptions. Taking the feasibility of drying, drying rate, drying time, and dried extract status as indicators, this study investigated the feeding requirements of microwave vacuum drying. With the dried extract status as the evaluation indicator, the three drying programs(A, B, and C) were compared to obtain the optimal drying condition. The experimental results showed that the optimal feeding conditions for microwave vacuum drying were material layer thickness of 2 cm and C program(a total of 7 drying processes), which solved the problem of easy scorching in microwave drying with process management. Furthermore, the preset moisture content of the dried extract in microwave drying should be 4%-5%, so that the dried extract of traditional Chinese medicine preparation had uniform quality, complete drying, and no scorching. This study lays a foundation for the application of microwave drying in the production of traditional Chinese medicine preparations, promoting the high-quality development of personalized traditional Chinese medicine preparations.

Modelling Annihilation Properties of Positronium Confined in Nanoporous Materials: A Review.

Positronium (Ps) is a valuable probe to investigate nanometric or sub-nanometric cavities in non-metallic materials, where Ps can be confined. Accessible experimental measurements concern the lifetime of trapped Ps, which is largely influenced by pick-off processes, depending on the size of the cavity as well as on the density of the electrons belonging to the surface of the host trap. Another relevant physical quantity is the contact density, that is the electron density at the positron position, which is usually found to be well below the vacuum value. Here, we review the principal models that have been formulated to account and explain for these physical properties of confined Ps. Starting with models, treating Ps as a single particle formulated essentially to study pick-off, we go on to describe more refined two-particle models because a two-body model is the simplest approach able to describe any change in the contact density, observed in many materials. Finally, we consider a theory of Ps annihilation in nanometric voids in which the exchange correlations between the electron of Ps and the outer electrons play a fundamental role. This theory is not usually taken into account in the literature, but it has to be considered for a correct theory of pick-off annihilation processes.

Heating of metallic orthodontic devices during anti-aging treatment with vacuum and electromagnetic fields: In vitro study.

BACKGROUND: The physical appearance of an individual plays a primary role as it influences the opinion of the viewer. For this reason, orthodontic therapy to improve perceived aesthetics is in high demand among patients. This factor, combined with the increase in the number of non-invasive facial aesthetic treatments, has led to the need to understand potential risk factors in the application of medical devices to the perioral skin in patients with fixed orthodontic appliances. The aim of this study was to evaluate in vitro heating of the orthodontic bracket following electromagnetic fields and negative pressure (V-EMF) used as an anti-aging treatment. METHODS: Two different types of titanium alloy wires, one made of "beta-Titanium" alloy and the other "Ni-Ti" (DW Lingual Systems GmbH-Bad Essen-Germany) were used. The orthodontic wires and brackets mounted on a resin mouth were covered with porcine muscle tissue, then subjected to anti-aging therapy with a Bi-one LifeTouchTherapy medical device (Expo Italia Srl-Florence-Italy) which generates a combination of vacuum and electromagnetic fields (V-EMF) already adopted for antiaging therapy. During administration of the therapy, the orthodontic brackets and porcine tissue were thermally monitored using a Wavetek Materman TMD90 thermal probe (Willtek Communications GmbH-Germany). In total 20 orthodontic mouths were used, 10 with Beta Titanium wires and 10 with Nickel Titanium wires. RESULTS: A temperature increase of about 1°C was recorded in each group. The outcome of the present research shows that the absolute temperatures measured on orthodontic appliances, which, despite having a slightly different curve, both show an increase in temperature of 1.1°C at the end of the session, thus falling well within the safety range of 2°C as specified by the standard CENELEC EN 45502-1. Therefore, V-EMF therapy can be considered safe for the entire dental system and for metal prostheses, which tend to heat up at most as much as biological tissue (+0.9°C/1.1°C vs. 1.1°C/1.1°C). CONCLUSION: In conclusion, anti-aging therapy with V-EMF causes a thermal increase on orthodontic brackets that is not harmful to pulp health.

The effects of Juniperi fructus essential oil and vacuum packing on the shelf life of rainbow trout fillets during storage at 2±1°C.

We hypothesized that the combined effect of vacuum packaging and Juniperi fructus essential oil addition would increase shelf life. Six different treatments were tested. The effects of the different concentrations of J. fructus essential oil (0%, 0.3% and 0.6%) and packing method (non-vacuum and vacuum) on the fish (Oncorhynchus mykiss) fillets of stored 4±1 °C were investigated in terms of its microbiological (mesophilic aerobic bacteria and yeast-mold), chemical (pH,  total volatile alkaline nitrogen (TVB-N), thiobarbituric acid (TBA value)) and sensory quality. The results showed that J. fructus essential oil had a positive significant effect on quality parameters (p<0.05). In conclusion, based primarily on sensory, TVB-N and mesophilic bacteria data the shelf-life of fresh rainbow trout was 4 days (non-vacuum packaged), 13 days (vacuum packaged), 19 and 28 days treated with J. fructus oil (0.3 and 0.6%, v/w) under vacuum packaged, respectively. J. fructus essential oil application and vacuum packaging; extended the shelf life of fish fillets by an average of 15 days. The combined use of J. fructus essential oil and packaging techniques could form the basis for new studies.

Evaluation of phthalate migration potential in vacuum-packed.

In recent years, the presence and migration of PAEs in packaging materials and consumer products has become a serious concern. Based on this concern, the aim of our study is to determine the possible migration potential and speed of PAEs in benthic fish stored in vacuum packaging, as well as to monitor the storage time and type as well as polyethylene (PE) polymer detection.As a result of the analysis performed by µ-Raman spectroscopy, 1 microplastic (MP) of 6 µm in size was determined on the 30th day of storage in whiting fish muscle and the polymer type was found to be Polyethylene (PE) (low density polyethylene: LDPE). Depending on the storage time of the packaging used in the vacuum packaging process, it has been determined that its chemical composition is affected by temperature and different types of polymers are formed. 10 types of PAEs were identified in the packaging material and stored flesh fish: DIBP, DBP, DPENP, DHEXP, BBP, DEHP, DCHP, DNOP, DINP and DDP. While the most dominant PAEs in the packaging material were determined as DEHP, the most dominant PAEs in fish meat were recorded as BBP and the lowest as DMP. The findings provide a motivating model for monitoring the presence and migration of PAEs in foods, while filling an important gap in maintaining a safe food chain.

Exploiting the potential of a novel "in-situ latent heat recovery" in hollow-fiber vacuum membrane distillation process for simultaneously improved water production and energy efficiency.

Thermal driven membrane distillation (MD) technology is a promising method for purifying & recovering various salty (especially high salty) or contaminated wastewaters with low-grade heat sources. However, the drawbacks of "high energy consumption" and "high cooling water consumption" pose special challenges for the future development of this technology. In this article, we report an innovative strategy called "in-situ heat transfer", which is based on the jacketed structure composed of hollow fiber membranes and capillary heat exchange tubes, to simplify the migration steps of condensation latent heat in MD heat recovery process. The results indicate that the novel heat recovery strategy exhibits higher growth rates both in the flux and gained output ratio (47.4 % and 173.1 %, respectively), and further reduces the system's dependence on cooling water. In sum, under the control of the "in-situ heat transfer" mechanism, the functional coupling of "vapor condensation (exothermic)" and "feed evaporation (endothermic)" in limited-domain space is an attractive alternative solution, because it eliminates the disadvantages of the imbalance between heat supply and demand in traditional heat recovery methods. Our research may facilitate the development of MD heat recovery modules for industrial applications, which will help to further achieve the goal of energy saving and emission reduction.

Online quantification of nicotine in e-cigarette aerosols by vacuum ultraviolet photoionization mass spectrometry.

The growing popularity of e-cigarettes and the associated risks of nicotine addiction present a new challenge to global public health security. Measuring the nicotine levels in e-cigarette aerosols is essential to assess the safety of e-cigarettes. In this study, a rapid in situ method was developed for online quantification of nicotine in e-cigarette aerosols by using a homemade vacuum ultraviolet photoionization aerosol mass spectrometer (VUV-AMS). E-cigarette liquids with different nicotine concentrations were prepared to generate aerosols containing different levels of nicotine, which were employed as the calibration sources for nicotine quantification by VUV-AMS. The results showed that the mass concentration of nicotine in e-cigarette aerosols has a good linear relationship with its signal intensity in the mass spectrum, and the limits of detection and quantitation of nicotine by VUV-AMS were found to be 2.0 and 6.2 µg per puff respectively. Then the online method was utilized to measure five commercial e-cigarettes, and their nicotine yields were determined to be between 31 and 188 µg per puff with the nicotine fluxes from 7.7 to 70 µg s-1, agreeing with the results of the gas chromatography with a flame ionization detector (GC-FID). This study demonstrated the feasibility and advantages of VUV-AMS for quick quantification of nicotine in e-cigarette aerosols within seconds.

Effect of carbamide peroxide on biomechanical properties of vacuum-formed retainers: A split-mouth randomized controlled trial.

OBJECTIVE: To investigate the effect of tooth whitening on biomechanical properties of vacuum-formed retainers (VFRs). METHODS: Using a split-mouth, randomised controlled trial design, thirty participants were randomly allocated to receive whitening on either the upper or the lower arch, using 10 % carbamide peroxide for two weeks. Biomechanical properties such as hardness, tensile strength, and surface roughness were assessed two weeks after whitening was completed. RESULTS: Tensile strength of the whitening arch (mean ± SD: 40.93 ± 3.96 MPa) was significantly lower than that of the control (47.40 ± 5.03 MPa) (difference 6.47 MPa, 95 % CI 4.51 - 8.42, p < 0.001). Hardness and internal roughness of the whitening arch (VHN = 14.63 ± 2.29 N/mm2 and Ra = 1.33 ± 0.35 µm, respectively) were significantly greater than those of the control (12.22 ± 1.86 N/mm2 and 0.96 ± 0.29 µm, respectively) (differences 2.41 N/mm2, 95 % CI 1.56 - 3.25, p < 0.001 and 0.37 µm, 95 % CI 0.23 - 0.51, p < 0.001, respectively). The whitening arch showed greater tooth colour change (ΔE = 6.00 ± 3.32) than the control (ΔE = 2.50 ± 1.70) (difference = 3.50, 95 % CI 2.43 - 4.56, p < 0.001). CONCLUSIONS: Based on this short-term study, marked tooth colour change was achieved by whitening with VFRs as the whitening trays, but this changed the VFRs' biomechanical properties, including a decrease in tensile strength and an increase in hardness and internal roughness. CLINICAL SIGNIFICANCE: The application of carbamide peroxide in VFRs may compromise their mechanical properties.

Placing vacuum sponges in esophageal anastomotic leaks - how we do it.

PURPOSE: Endoluminal vacuum sponge therapy has dramatically improved the treatment of anastomotic leaks in esophageal surgery. However, the blind insertion of vacuum sponge kits like Eso-Sponge® via an overtube and a pusher can be technically difficult. METHODS: We therefore insert our sponges under direct visual control by a nonstandard "piggyback" technique that was initially developed for the self-made sponge systems preceding these commercially available kits. RESULTS: Using this technique, we inserted or changed 56 Eso-Sponges® in seven patients between 2018 and 2023. Apart from one secondary sponge dislocation, no intraprocedural complications were encountered. One patient died due to unrelated reasons. In all others, the defects healed and they were dismissed from the hospital. Long-term follow-up showed three strictures that were successfully treated by dilatation. CONCLUSION: We conclude that sponge placement via piggyback technique is a fast, safe, and successful alternative to the standard method of insertion.

An Individual Barrier Enclosure Actively Removing Aerosols for Airborne Isolation: A Vacuum Tent.

BACKGROUND: Aerosol barrier enclosure systems have been designed to prevent airborne contamination, but their safety has been questioned. A vacuum tent was designed with active continuous suctioning to minimize risks of aerosol dispersion. We tested its efficacy, risk of rebreathing, and usability on a bench, in healthy volunteers, and in an ergonomic clinical assessment study. METHODS: First, a manikin with airway connected to a breathing simulator was placed inside the vacuum tent to generate active breathing, cough, and CO2 production; high-flow nasal cannula (HFNC) was applied in the manikin's nares. Negative pressure was applied in the vacuum tent's apex port using wall suction. Fluorescent microparticles were aerosolized in the vacuum tent for qualitative assessment. To quantify particles inside and around vacuum tent (aerosol retention), an airtight aerosol chamber with aerosolized latex microparticles was used. The vacuum tent was tested on healthy volunteers breathing with and without HFNC. Last, its usability was assessed in 5 subjects by 5 different anesthesiologists for delivery of full anesthesia, including intubation and extubation. RESULTS: The vacuum tent was adjusted until no leak was visualized using fluorescent particles. The efficacy in retaining microparticles was confirmed quantitatively. CO2 accumulation inside the vacuum tent showed an inverse correlation with the suction flow in all conditions (normal breathing and HFNC 30 or 60 L/min) in bench and healthy volunteers. Particle removal efficacy and safe breathing conditions (CO2, temperature) were reached when suctioning was at least 60 L/min or 20 L/min > HFNC flow. Five subjects were successfully intubated and anesthetized without ergonomic difficulties and with minimal interference with workflow and an excellent overall assessment by the anesthesiologists. CONCLUSIONS: The vacuum tent effectively minimized aerosol dispersion. Its continuous suction system set at a high suction flow was crucial to avoid the spread of aerosol particles and CO2 rebreathing.

Novel method for recovering valuable metals from Sn ash: Vacuum carbothermal reduction-directional condensation.

Sn ash recycling is an industry with positive development prospects, as it provides better-protected resources, promotes sustainable development, and lays a solid foundation for future development. In this study, an innovative vacuum carbothermal reduction-directional condensation process was developed. The thermodynamic analysis results indicated that the initial reaction pressure and temperature for the carbothermal reduction of the system was 1-10 Pa and 998-1063 K, respectively. The saturation vapor pressure, separation coefficient, and condensation temperature of Sn, Pb, and Zn in the reduced products differed significantly, and their separation could be achieved by controlling the volatilization and condensation temperatures. A single-factor experiment investigated the effects of carbon ratio, temperature, and time on the reduction efficiency, direct yield, and recovery rate. The optimal experimental conditions were the ratio of MeO to C of 4:1, temperature of 1373 K, and time of 120 min. Sn, Pb, and Zn products were obtained at different positions. This process shortens the traditional process, reduces the reduction cost of Sn, and enables the implementation of the process, making it environmentally friendly.

Investigation of the interface of fungal mycelium composite building materials by means of low-vacuum scanning electron microscopy.

Low-vacuum scanning electron microscopy (low-vacuum SEM) is widely used for different applications, such as the investigation of noncoated specimen or the observation of biological materials, which are not stable to high vacuum. In this study, the combination of mineral building materials (concrete or clay plaster) with a biological composite (fungal mycelium composite) by using low-vacuum SEM was investigated. Fungal biotechnology is increasingly gaining prominence in addressing the challenges of sustainability transformation. The construction industry is one of the biggest contributors to the climate crises and, therefore, can highly profit from applications based on regenerative fungal materials. In this work, a fungal mycelium composite is used as alternative to conventional insulating materials like Styrofoam. However, to adapt bio-based products to the construction industry, investigations, optimisations and adaptations to existing solutions are needed. This paper examines the compatibility between fungal mycelium materials with mineral-based materials to demonstrate basic feasibility. For this purpose, fresh and hardened concrete specimens as well as clay plaster samples are combined with growing mycelium from the tinder fungus Fomes fomentarius. The contact zone between the mycelium composite and the mineral building materials is examined by scanning electron microscopy (SEM). The combination of these materials proves to be feasible in general. The use of hardened concrete or clay with living mycelium composite appears to be the favoured variant, as the hyphae can grow into the surface of the building material and thus a layered structure with a stable connection is formed. In order to work with the combination of low-density organic materials and higher-density inorganic materials simultaneously, low-vacuum SEM offers a suitable method to deliver results with reduced effort in preparation while maintaining high capture and magnification quality. Not only are image recordings possible with SE and BSE, but EDX measurements can also be carried out quickly without the influence of a coating. Depending on the signal used, as well as the magnification, image-recording strategies must be adapted. Especially when using SE, an image-integration method was used to reduce the build-up of point charges from the electron beam, which damages the mycelial hyphae. Additionally using different signals during image capture is recommended to confirm acquired information, avoiding misinterpretations.

Vacuum bell therapy for pectus excavatum: a retrospective study.

BACKGROUND: Pectus excavatum, the most common chest wall deformity, is frequently treated with Nuss procedure. Here we will describe non-invasive procedure and analyze the variables associated vacuum bell therapy for patients with pectus excavatum. METHODS: Retrospective case-control study in a single center between July 2018 and February 2022, including patients with pectus excavatum treated with vacuum bell. Follow-up was continued to September 2022. The Haller index and Correction index was calculated before and after treatment to analysis the effectiveness of vacuum bell therapy. RESULTS: There were 98 patients enrolled in the treatment group, with 72 available for analysis, and the follow-up period ranged from 1.1 to 4.4 years (mean 3.3 years). When analyzing with the Haller Index, 18 patients (25.0%) showed excellent correction, 13 patients (18.1%) achieved good correction, and 4 patients (5.6%) had fair correction. The remaining patients had a poor outcome. Characteristics predicting a non-poor prognosis included initial age ≤ 11 years (OR = 3.94, p = 0.013) and patients with use over 24 consecutive months (OR = 3.95, p = 0.013). A total of 9 patients (12.5%) achieved a CI reduction below 10. Patients who started vacuum bell therapy at age > 11 had significantly less change compared to those who started at age ≤ 11 (P < 0.05). Complications included chest pain (5.6%), swollen skin (6.9%), chest tightness (1.4%) and erythema (15.3%). CONCLUSIONS: A certain percentage of patients with pectus excavatum can achieve excellent correction when treated with pectus excavatum therapy. Variables predicting better outcome including initial age ≤ 11 years both in HI and CI and vacuum bell use over 24 consecutive months in HI. In summary, pectus excavatum is an emerging non-invasive therapy for pectus excavatum and will be widely performed in a certain group of patients.

Comparison of Sensor-Based and Audible Detection of Milking Liner Slips during Machine Milking of Dairy Cows.

On-farm milk flow meter technology facilitates real-time assessment of individual cow milking observations and could be used to detect milking liner slips during machine milking of dairy cows. Here, we compared the accuracy of on-farm milk flow meters for detecting milking liner slips with that of audible detection and that of a portable vacuum recording system. Compared to audible detection methods, the on-farm milk flow meter facilitated the detection of milking liner slips with moderate accuracy. Using the vacuum recording system as the gold standard, the milk flow meter system failed to detect most of the liner slips, leading to poor agreement between the two devices. We conclude that the on-farm milk flow meter system tested here compared well with audible detection; however, when vacuum recordings were considered, we found significant levels of under-detection. Taken together, dairy operators may use the on-farm milk flow meter system to inform adjustments of the milking machine settings and monitor milking routine performance. However, the system is not suitable for monitoring short-duration vacuum fluctuations. Future research is warranted to optimize the sensor-based detection of milking liner slips.

Effect of dry heat and its combination with vacuum heat on physicochemical, rheological and release characteristics of Alocasia macrorrhizos retrograded starches.

Retrograded starches have received increasing attention due to their potential excipient properties in pharmaceutical formulations. However, to evade its application-oriented challenges, modification of retrograded starch is required. The study emphasizes influence of dry heating and the dual heat treatment by dry heating amalgamation with the vacuum heat treatment on quality parameters of retrograded starch. The starch was isolated by using two different extraction media (0.05 % w/v NaOH and 0.03 % citric acid) from Alocasia macrorrhizos and then retrograded separately. Further, retrograded starches were first modified by dry heating and afterwards modified with combination of dry and vacuum heating. Modification decreased moisture, ash content and increased solubility. Modified Samples from NaOH media had higher water holding capacity and amylose content. X-ray diffraction revealed type A and B crystals with increasing crystallinity of retrograded heat-modified samples from NaOH media. Thermogravimetric analysis, differential scanning calorimetry confirmed thermal stability. Shear tests showed shear-thinning behavior whereas dominant storage modulus (G/) over loss modulus (G//), depicting gel-like behavior. Storage, loss, and complex viscosity initially increased, then decreased with temperature. In-vitro release reflects, modified retrograded starches offers versatile drug release profiles, from controlled to rapid. Tailoring starch properties enables precise drug delivery, enhancing pharmaceutical formulation flexibility and efficacy.

Emission of Parasitic X Rays of Vacuum-electron Tubes with Glass Housings: Implications for the Evaluation of Occupational Doses.

Despite the large variety of high-voltage semiconductor components for medium and high voltage switching and pulse-forming applications as well as for high-power high-frequency generation, the use of vacuum electron tubes still prevails to a considerable degree. Due to the common design incorporating a high energy electron beam which finally is dumped into an anode or a resonator cavity, these tubes are also considered as sources of X rays produced as bremsstrahlung and characteristic radiation, which are referred to as parasitic X rays. Here three types of vacuum-electron tubes, diode, tetrode, and thyratron, with glass housings are investigated. They are predominantly operated in the high voltage range below 30 kV and are not subject to licensing laws. The measurements of the dose rate and X-ray-spectra were performed in the laboratory without complex electrical circuitry usually used in making practical measurements for occupational radiation protection. For the diode tube, where a parasitic X-ray emission is observed only in the reverse operation as a blocking diode, a broad distribution of dose rates of electrically equivalent specimens was observed. This is attributed to field emission from the electrodes. For the tetrode and the thyratron tubes, field emission from the electrodes is identified as the dominant mechanism for the generation of parasitic X rays. Thus, technical radiation protection must focus on shielding of the glass tube rather than optimization of the electrical circuitry.

Recent advances in spoilage mechanisms and preservation technologies in beef quality: A review.

Beef is a popular meat product that can spoil and lose quality during postharvest handling and storage. This review examines different preservation methods for beef, from conventional techniques like low-temperature preservation, irradiation, vacuum packing, and chemical preservatives, to novel approaches like bacteriocin, essential oil, and non-thermal technologies. It also discusses how these methods work and affect beef quality. The review shows that beef spoilage is mainly due to enzymatic and microbial activities that impact beef freshness, texture, and quality. Although traditional preservation methods can extend beef shelf life, they have some drawbacks and limitations. Therefore, innovative preservation methods have been created and tested to improve beef quality and safety. These methods have promising results and potential applications in the beef industry. However, more research is needed to overcome the challenges and barriers for their commercialization. This review gives a comprehensive and critical overview of the current and emerging preservation methods for beef and their implications for the beef supply chain.

Comparing the effects of packaging normal-pH and atypical dark-cutting beef in modified atmosphere conditions on surface color.

Limited studies have determined the effects of modified atmospheric packaging (MAP) on atypical dark-cutting beef surface color. The objective was to compare the impacts of using vacuum packaging, carbon monoxide (CO-MAP), and HiOx-MAP (high­oxygen) on the retail color of normal-pH and atypical dark-cutting beef aged 14 d. Atypical dark-cutting beef (pH 5.63) had numerically greater (P > 0.05) pH than normal-pH beef (pH 5.56). Atypical dark-cutting steaks were darker in color (lower L* values; P < 0.05) than normal-pH steaks. Atypical dark-cutting steaks had greater (P < 0.05) oxygen consumption, lower (P < 0.05) relative oxygenation, and less inter-muscle bundle space (P < 0.05) than normal-pH steaks. There were no differences (P > 0.05) in redness between normal-pH and atypical dark-cutting steaks when packaged in HiOx-MAP. Although a minimal increase in pH was observed in atypical dark-cutting beef, steaks in CO-MAP had lower redness than normal-pH steaks.

Effects of relative humidity on dry-aged beef quality.

This study was conducted to evaluate the effects of relative humidity (RH) on moisture loss and flavor in dry-aged beef. Sixteen strip loins were assigned to one of the four aging treatments: vacuum (WET), dry-aging at 50% RH, dry-aging at 70% RH, or dry-aging at 85% RH and aged for 42 days at 2 °C. Loins were evaluated for evaporation loss, trim loss, tenderness, sensory, and microbiological characteristics. Results show that lower RH results in accelerated moisture loss during the first 3 days of the aging process without significantly affecting the total amount of moisture loss. Pseudomonadales dominated the aerobically dry-aged loins while Enterobacteriales was the most abundant in the wet-aged samples. Dry-aged samples had increased content of free amino acids in the cooked meat juice compared to the wet-aged counterpart. Dry aging at 50% RH tended to associate with more desirable flavor notes.