Carboxymethylation of polysaccharide isolated from Alkaline Peroxide Mechanical Pulping (APMP) waste liquor and its bioactivity.

In recent years, the biological activity of polysaccharides and their derivatives has been widely studied. However, in addition to the natural polysaccharides directly extracted from plants and animals, there are rich polysaccharides in the pulping waste liquor that have not been fully utilized. The extracted polysaccharide from eucalyptus Alkaline Peroxide Mechanical Pulping (APMP) waste liquor was used as a raw material. For the production of carboxymethyl polysaccharide, the effects of temperature (T), the amount of alkali (NaOH) and the amount of etherifying agent (ClCH2COOH) on the degree of substitution (DS) were investigated, the optimal preparation conditions are: reaction time 2 h, temperature 75 °C, and the molar ratio of polysaccharide, NaOH and ClCH2COOH is 1:1:2, the highest DS is 1.47; FT-IR, NMR and GPC were used to characterize the structure and Molecular weight, the results show that the polysaccharide of APMP waste liquor is rich in xylan, and it was proved that the carboxymethyl substitution was successful and the positions of the substituent group were determined. The characterization and biological activity research of xylan polysaccharide (XP) and carboxymethyl xylan polysaccharide (CMXP), such as antioxidation, moisture absorption/retention, bacteriostatic action and cytotoxicity were discussed. CMXP shows better effects compared with XP.

Synthesis and characterization of biofunctional quaternized xylan-Fe2O3 core/shell nanocomposites and modification with polylysine and folic acid.

The aims of this study are to prepare quaternized xylan-Fe2O3 (QX-Fe2O3) core/shell nanocomposites and explore their potential application in the biomedical fields. γ-Fe2O3 nanoparticles synthesized by a facile solvothermal process are coated with QX via reverse microemulsion method and further modified by polylysine (PLL) and folic acid (FA) to prepare PLL-QX-Fe2O3 and FA-QX-Fe2O3 nanoparticles. An obvious strong absorption of γ-Fe2O3 at 580 cm-1 in the spectra of QX-Fe2O3 is observed, the Fe element content of QX-Fe2O3 is 30-75 µg/mL and the saturation magnetization of QX-Fe2O3 nanoparticles is 1.49 emu/g. The γ-Fe2O3 and QX-Fe2O3 nanoparticles are of regular sphericity with diameter of 50-100 nm and 60-150 nm, respectively. The highest zeta potential of QX-Fe2O3 nanoparticles is -41 mV, and the PLL-QX-Fe2O3 nanoparticles have a positive potential with a maximum value of 45.2 mV. In addition, FA-QX-Fe2O3 showed excellent performance in T2-weighted Magnetic Resonance (MR) imaging with an r2 value of 190 mM-1S-1. Each nanocomposite has its own inherent properties, which contributes to its versatile utilization and application potential.

Preparation and properties of multifunctional sinapic acid corn bran arabinoxylan esters.

In the present study, corn bran arabinoxylan (CAX) were modified with sinapic acid (SA) by esterification to generate sinapic acid corn bran arabinoxylan esters (SA-CAX) with various substituted degrees. The structure of SA-CAX was characterized by FT-IR, NMR and UV spectroscopy. And the antioxidant activities of SA-CAX were evaluated by scavenging the 2,2'-diphenyl-1-picrylhydrazyl (DPPH) radical, emulsion lipid oxidation test and the lipid peroxidant level test. Compared with CAX, SA-CAX exhibited superior antioxidant activities in vitro, which indicated that the attachment of SA to CAX could enhance antioxidant activities of CAX. Moreover, the aqueous solution behavior of CAX and SA-CAX was investigated by light scattering, scanning electron microscopy and rheological measurement. The SA-CAX could form the aggregates even at diluted solutions. The hydrophobic association led to a higher viscosity and stronger gel behavior of the SA-CAX aqueous solution than that of CAX aqueous solution.

Xyloglucan: A functional biomacromolecule for drug delivery applications.

The near future of drug delivery system would lie in the search of a versatile and innocuous material, based mostly on the natural resources. The tamarind seed xyloglucan (XG) is a natural neutral hemicellulose and a hydrophilic polysaccharide consisting of a main chain of glucan backbone with xylose and galactose side chains. XG is endowed with idiosyncratic mucoadhesive and in situ gelling properties which rated XG as an attractive, functional polymer for numerous drug delivery applications. In milieu of this, the present review is designed to underline the plausible potential of XG or XG-based systems in drug delivery. The feasibility of surface-tailoring, the flexibility of chemical-modification, and the possibility as ligand-conjugations grant XG an extraordinary consideration in the scientific territory. The authors are hopeful that the versatility of XG would meet the expectations of regulatory authorities and the XG-based products will serve the therapeutic needs of the community in the future, if sufficiently investigated and promising outcomes are obtained in human subjects.

Preparation and characterization of safe microparticles based on xylan.

This work describes the preparation and evaluation of safe xylan-based microparticles prepared by cross-linking polymerization using sodium trimetaphosphate. The resulting microparticles were evaluated for morphology, particle size, polymer-cross-link agent interaction, and in vitro toxicity. The microparticles showed narrow monodisperse size distributions with their mean sizes being between 3.5 and 12.5 µm in dried state. FT-IR analyzes confirmed the interaction between sodium trimetaphosphate and xylan during the cross-linking process with formation of phosphate ester bonds. Additionally, the X-ray diffraction patterns and FT-IR analyzes suggested that little or no cross-linking agent remained inside the microparticles. Furthermore, the in-vitro studies using Artemia salina and human erythrocytes revealed that the microparticles are not toxic. Therefore, the overall results suggest that these xylan microparticles can be used as a platform for new drug delivery system.

Structure analysis of a novel heteroxylan from the stem of Dendrobium officinale and anti-angiogenesis activities of its sulfated derivative.

Dendrobium officinale Kimura et Migo (Tie-Pi-Shi-Hu), a precious folk medicine exhibiting multiple bioactivities, including antitumor, immune-enhancing and so on. Although evidences showed polysaccharide is one of the major bioactive substances from this herb, several of them were homogenous with fine structures elucidated. In this study, we showed a novel homogeneous heteroxylan obtained from alkali-extracted crude polysaccharide. It composed of arabinose, xylose, glucose and 4-O-methylglucuronic acid (4-MGA) as well as trace amount of rhamnose and galactose in a ratio of 8.9:62.7:8.5:12.3:3.9:3.7. We further showed that it contained a backbone of 1,4-linked ß-d-xylan, with branches of 1,4-linked α-d-glucose, 1,3-linked α-l-rhamnose, and terminal-linked α-l-arabinose, ß-d-galactose, 4-MGA, and ß-d-xylose directly or indirectly attached to C-2 position of glycosyl residues on backbone. The sulfated derivative with substitution degree about 0.9 was prepared according to the chlorosulfonic acid (CSA)-pyridine method. Bioactivity tests suggested that the sulfated polysaccharide could significantly disrupt tube formation and inhibit the migration of human microvascular endothelial cells (HMEC-1) at a low concentration (0.29µM) in a dose-dependent way without significant cytotoxity.

Convergent strategy for the synthesis of S-linked oligoxylans.

Arabinoxylans (AX) are a major class of hemicellulose and an important polysaccharide component of lignocellulosic biomass. To utilize the glycan polymer effectively, it is desirable to learn more about the enzymatic hydrolysis of AXs. Well-defined glycans can help to elucidate these processes. Here, we report the efficient synthesis of a mixed O- and S-linked tetraxylan. This thio-oligosaccharide has been developed as a putative inhibitor of arabinoxylan degrading enzymes used for the saccharification of biomass. Two common approaches for the synthesis of thio-oligosaccharides, either involving 1-thioglycoside donors or thioacceptors, are presented and compared regarding byproduct formation and yields. Both methods have shown to be useful for the synthesis of thiolinkages in oligoxylans assembly. However, the success of the reaction is highly dependent on the "match" between donors and acceptors.

Active Site Mapping of Xylan-Deconstructing Enzymes with Arabinoxylan Oligosaccharides Produced by Automated Glycan Assembly.

Xylan-degrading enzymes are crucial for the deconstruction of hemicellulosic biomass, making the hydrolysis products available for various industrial applications such as the production of biofuel. To determine the substrate specificities of these enzymes, we prepared a collection of complex xylan oligosaccharides by automated glycan assembly. Seven differentially protected building blocks provided the basis for the modular assembly of 2-substituted, 3-substituted, and 2-/3-substituted arabino- and glucuronoxylan oligosaccharides. Elongation of the xylan backbone relied on iterative additions of C4-fluorenylmethoxylcarbonyl (Fmoc) protected xylose building blocks to a linker-functionalized resin. Arabinofuranose and glucuronic acid residues have been selectively attached to the backbone using fully orthogonal 2-(methyl)naphthyl (Nap) and 2-(azidomethyl)benzoyl (Azmb) protecting groups at the C2 and C3 hydroxyls of the xylose building blocks. The arabinoxylan oligosaccharides are excellent tools to map the active site of glycosyl hydrolases involved in xylan deconstruction. The substrate specificities of several xylanases and arabinofuranosidases were determined by analyzing the digestion products after incubation of the oligosaccharides with glycosyl hydrolases.

Physico-chemical and mechanical characterization of in-situ forming xyloglucan gels incorporating a growth factor to promote cartilage reconstruction.

The development of growth factors is very promising in the field of tissue regeneration but specifically designed formulations have to be developed in order to enable such new biological entities (NBEs). In particular, the range of therapeutic concentrations is usually very low compared to other active proteins and the confinement in the target site can be of crucial importance. In-situ forming scaffolds are very promising solutions for minimally invasive intervention in cartilage reconstruction and targeting of NBEs. In this work injectable, in-situ forming gels of a temperature responsive partially degalactosylated xyloglucan (Deg-XG) incorporating the growth factor FGF-18 are formulated and characterized. In particular, injectability and shear viscosity at room temperature, time-to-gel at body temperature, morphology and mechanical properties of gels are investigated. The highly hydrophobic growth factor is favorably incorporated and retained by the gel. Gels undergo a slow erosion process when immersed in PBS at 37°C that opens up their porous structure. The prolonged hydrothermal treatment leads to structural rearrangements towards tougher networks with increased dynamic shear modulus. Preliminary biological evaluations confirm absence of cytotoxicity and the ability of these scaffolds to host cells and promote their proliferation.

Temporal control of xyloglucan self-assembly into layered structures by radiation-induced degradation.

Partially degalactosylated xyloglucan from tamarind seeds (Deg-XG) is a very appealing biopolymer for the production of in situ gelling systems at physiological temperature. In this work, we observe that the morphology of hydrogels evolves towards high degrees of structural organization with time, yielding to dense stacks of thin membranes within 24h of incubation at 37°C. We also explore the possibility offered by gamma irradiation of controlling the time scale of this phenomenon, the final morphology and mechanical properties of the system. Structural and molecular modifications of Deg-XG with dose are investigated by FTIR, dynamic light scattering (DLS) and rotational viscosimetry. The impact on gelation ability and gel strength is studied by rheological analysis. The morphology evolution is investigated by SEM analysis, and absence of cytotoxicity verified by MTS assay and optical microscopy of neuroblastoma cells.

Surfactants of biological origin: The role of Mo(VI) and microwaves in the synthesis of xylan-based non-ionic surfactants.

Microwave-assisted, phosphomolybdic acid (PMoA) catalyzed, glycosylation of unprotected d-xylose and d-lyxose, obtained after tandem Mo(VI)-catalyzed xylan hydrolysis-epimerization reaction, provides alkyl xylosides and lyxosides in short reaction times. A homologous series of amphiphilic alkyl pentosides varying in chain structure (C8-C14) was prepared in very good yields (38-73%). A new catalytic approach using the reusable heterogeneous PMoA/SiO2 catalyst provides benefits in terms of yields, environmental safety, operational simplicity, and thus opens new perspectives for the rational hemicellulose biomass utilization.

Automated glycan assembly of xyloglucan oligosaccharides.

We report the automated glycan assembly of oligosaccharide fragments related to the hemicellulose xyloglucan (XG). Iterative addition of monosaccharide and disaccharide building blocks to a solid support provided seven cellulose and xyloglucan fragments including XXGG- and XXXG-type oligosaccharides.

Novel thiol- amine- and amino acid functional xylan derivatives synthesized by thiol-ene reaction.

In the present work, novel thioether xylans were synthesized via a simple procedure using water as solvent. First, allyl groups were introduced on the backbone of xylan by etherification of allyl chloride in aqueous alkaline conditions at 40°C, providing degree of substitution (DS) values up to 0.49. On the second step, the allyl groups were reacted with thioacetic acid, cysteamine hydrochloride or cysteine providing novel thiol-, amine- or amino acid functionalized xylans. The presented modular approach offers broad possibilities for developing new polysaccharide based materials. The thioacetic acid - ene reaction is reported for the first time for polysaccharide modification, yielding a protected thiol that can be stored at atmospheric conditions and can be deprotected by simple hydrolysis just prior to use, providing a versatile water soluble polythiol. The free thiol-groups were utilized for hydrogel formation through thiol-thiol oxidative coupling, allowing good control over the hydrogel shape, such as 3D hydrogel scaffolds and cross-linked foams. Further, the thiol-containing xylan was used to modify filter paper surface by a simple dipping method, which provides a novel and convenient way for introducing thiol-functionality on paper surface.

Pyrolysis mechanism study of minimally damaged hemicellulose polymers isolated from agricultural waste straw samples.

The pyrolysis mechanism of hemicellulose has been investigated using two minimally damaged hemicellulose polymers isolated from two agricultural straw samples. The obtained hemicelluloses have been characterized by multiple methods, and the results showed that they were mainly composed of l-arabino-4-O-methyl-d-glucurono-d-xylan. Their O-acetyl groups and high degrees of polymerization and branching were well preserved. Their pyrolyses were subsequently investigated by TG-FTIR and Py-GC/MS. The evolutions of four typical volatile components and the distributions of eight product species were scrutinized. A DG-DAEM kinetic model was applied to quantify the contributions of two major pyrolytic routes for devolatilization during hemicellulose pyrolysis. A mean activation energy of 150kJ/mol for the formation of volatiles was derived. The thermal stability of each bond in four typical fragments of hemicellulose was assessed by DFT study, and the deduced decomposition pathways were in agreement with experimental analysis.

Effect of pretreatment methods on the synergism of cellulase and xylanase during the hydrolysis of bagasse.

The effect of pretreatment with peracetic acid (PAA) or an ionic liquid (1-ethyl-3-methylimidazolium acetate, [Emim][OAc]) on the synergism between endoglucanase and endoxylanase in the hydrolysis of bagasse was investigated. An endoglucanase, Cel6A, with a carbohydrate-binding module (CBM) and two endoxylanases, XynZ-C without a CBM and Xyn11A with an intrinsic xylan/cellulose binding module (XBM), were selected. The hemicellulose content, especially arabinan, and the cellulose crystallinity of bagasse were found to affect the cellulase-xylanase synergism. More specifically, higher synergism (above 3.4) was observed for glucan conversion, at low levels of arabinan (0.9%), during the hydrolysis of PAA pretreated bagasse. In contrast, [Emim][OAc] pretreated bagasse, showed lower cellulose crystallinity and achieved higher synergism (over 1.9) for xylan conversion. Ultimately, the combination of Cel6A and Xyn11A resulted in higher synergism for glucan conversion than the combination of Cel6A with XynZ-C, indicating the importance of the molecular architecture of enzymes for metabolic synergism.

Automated synthesis of arabinoxylan-oligosaccharides enables characterization of antibodies that recognize plant cell wall glycans.

Monoclonal antibodies that recognize plant cell wall glycans are used for high-resolution imaging, providing important information about the structure and function of cell wall polysaccharides. To characterize the binding epitopes of these powerful molecular probes a library of eleven plant arabinoxylan oligosaccharides was produced by automated solid-phase synthesis. Modular assembly of oligoarabinoxylans from few building blocks was enabled by adding (2-naphthyl)methyl (Nap) to the toolbox of orthogonal protecting groups for solid-phase synthesis. Conjugation-ready oligosaccharides were obtained and the binding specificities of xylan-directed antibodies were determined on microarrays.

Synthesis and characterization of amphoteric xylan-type hemicelluloses by microwave irradiation.

In this study, a novel amphoteric macromolecule was synthesized by sequential incorporation of carboxymethyl and quaternary ammonium groups into the backbone of xylan-type hemicelluloses under microwave irradiation. The reaction parameters such as the molar ratio of reagent (NaOH or 3-epoxypropyltrimethylammonium chloride)/anhydroxylose unit in hemicelluloses, the temperature, and the reaction time were investigated to optimize the reaction condition. The maximum degrees of substitution (DS) of carboxymethyl and quaternary ammonium groups under the optimum reaction condition were 0.90 and 0.52, respectively, exhibiting a higher efficiency as compared to the conventional heating method. Moreover, the thermal stability and weight-average molecular weight of amphoteric hemicellulosic derivatives decreased as compared to the native hemicelluloses. The viscosity, elastic modulus, and loss modulus of the amphoteric biomacromolecules increased with the increasing DS of quaternary ammonium groups in aqueous solution due to stronger electrostatic attraction. This study provides an efficient and rapid method to prepare amphoteric biomacromolecules.

Green synthesis of xylan hemicellulose esters.

The esterification of xylan type hemicelluloses, isolated from birchwood, was carried out firstly in homogeneous conditions using N,N-dimethylformamide (DMF) and lithium chloride (LiCl) in the presence of 4-dimethylaminipyridine (DMAP). The degree of substitution (DS) of xylan acetates ranged between 0.9 and 2.0 as a function of experimental conditions. Due to the problems of toxicity and recycling of DMF, an alternative method of esterification is reported in the second part of this work, performing in the absence of organic solvent and using DMAP or methanesulfonic acid (MSA) as catalysts. Acetylation reaction catalyzed by MSA was developed through an experimental design in order to achieve the highest DS under the mildest conditions. The significant factors and their interactions were identified. The optimization of reaction parameters allowed to obtain a high DS (1.6) and maximal yield (85%). Moreover, the reactivity of propionic and hexanoic anhydrides was evaluated and hydrophobic xylan esters with low degrees of substitution were obtained.

Synthesis and antioxidant activity of hydroxycinnamic acid xylan esters.

Naturally occurring hydroxycinnamic acids, such as ferulic and sinapic acids, are known to possess antioxidant activity. In this study, ferulic acid and sinapic acid were covalently attached to oat spelt arabinoxylan and birch wood glucuronoxylan by esterification in a two-step feasible synthesis to generate modified xylans with various degrees of substitution. The obtained derivatives were fully analyzed by FT-IR, NMR, and HPSEC experiments to confirm the esterification of xylans and the degree of substitution. The antioxidative potential of the conjugates was evaluated using the emulsion lipid oxidation test. The results demonstrate that the derivatized xylans inhibited lipid oxidation notably better than the native oat spelt and birch wood xylans. It was found that ferulic acid esters of glucuronoxylan were more efficient antioxidants than those of arabinoxylan and that sinapic acid xylan esters were more efficient than their ferulic acid counterparts.