Accelerated Predictive Stability Study of a Pediatric Drug Product for a Supplemental New Drug Application.

In this paper, we report two Accelerated Stability Assessment Program (ASAP) studies for a pediatric drug product. Whereas the first study using a generic design failed to establish a predictive model, the second one was successful after troubleshooting the first study and customizing the study conditions. This work highlighted important lessons learned from designing an ASAP study for formulations containing excipients that could undergo phase change at high humidity levels. The stability predictions by the second ASAP model were consistent with available long-term stability data of the drug product under various storage conditions in two different packaging configurations. The ASAP model was part of the justifications accepted by the health authority to submit a stability package with reduced long-term stability data from the primary stability batches for a Supplemental New Drug Application (sNDA).

Urgent support mechanism: saving millions of COVID-19 vaccines from expiry in Africa.

Delivering COVID-19 vaccines with 4-6 weeks shelf life remains one of Africa's most pressing challenges. The Africa Centres for Disease Control and Prevention (Africa CDC) leadership recognised that COVID-19 vaccines donated to many African countries were at risk of expiry considering the short shelf life on delivery in the Member States and slow vaccine uptake rates. Thus, a streamlined rapid response system, the urgent support mechanism, was developed to assist countries accelerate COVID-19 vaccine uptake. We describe the achievements and lessons learnt during implementation of the urgent support mechanism in eight African countries. An Africa CDC team was rapidly deployed to meet with the Ministry of Health of each country alerted for COVID-19 vaccine expiry and identified national implementing partners to quickly develop operational work plans and strategies to scale up the urgent use of the vaccines. The time between the initiation of alerts to the start of the implementation was typically within 2 weeks. A total of approximately 2.5 million doses of vaccines, costing $900 000, were prevented from expiration. The urgent support has also contributed to the increased COVID-19 vaccination coverage in the Member States from 16.1% at the initiation to 25.3% at the end of the urgent support. Some of the effective strategies used by the urgent support mechanism included coordination between Africa CDC and country vaccine task forces, establishment of vaccination centres, building the capacity of routine and surge health workforce, procurement and distribution of vaccine ancillaries, staff training, advocacy and sensitisation events, and use of trusted religious scriptures and community influencers to support public health messages. The urgent support mechanism demonstrated a highly optimised process and serves as a successful example for acceleration and integration of vaccination into different healthcare delivery points.

Bracketed Stability Evaluation of Methimazole USP in PLO Gel Mediflo™30 Pre-Mixed.

Extemporaneously compounded Methimazole 1% and 10% in PLO Gel Mediflo™30 Pre-Mixed were studied to assess physical, chemical and microbial stability over time. The formulations were stored at room temperature in tightly closed, light resistant plastic containers. Chemical stability was evaluated using a validated, stability indicating HPLC analysis and physical stability was evaluated through observation of organoleptic appearance and pH measurement at predetermined time points. Lastly, antimicrobial effectiveness testing was conducted per USP <51> guidelines. The results indicate that compounded Methimazole remained within the stability criteria for the duration of the study and can be assigned an extended beyond-use-date of 120 days under the studied conditions.

Caffeoylquinic acid profiling: comparative analysis in yerba mate, Indian camphorweed, and stevia extracts with emphasis on the influence of brewing conditions and cold storage in yerba mate infusion.

Herbal infusions exhibit diverse pharmacological effects, such as antioxidant, anti-inflammatory, anticancer, antihypertensive, and antineurodegenerative activities, which can be attributed to the high content of phenolic compounds (e.g., caffeoylquinic acids (CQAs)). In this study, we used ultraperformance liquid chromatography to determine the content of CQAs in the methanolic extracts of model herbs, namely, yerba mate (Ilex paraguariensis), stevia (Stevia rebaudiana), and Indian camphorweed (Pluchea indica (L.) Less.). The results revealed that yerba mate had the highest total CQA content (108.05 ± 1.12 mg/g of dry weight). Furthermore, we evaluated the effect of brewing conditions and storage at 4 °C under dark and light conditions on the antioxidant property and total phenolic and CQA contents of a yerba mate infusion. The analysis of the yerba mate infusions prepared with different steeping times, dried leaf weights, and water temperatures revealed that the amount of extracted CQAs was maximized (∼175 mg/150 mL) when 6 g of dried leaves were steeped in hot water for 10 min. A total of 10-day refrigerated storage resulted in no significant changes in the antioxidant activity and total phenolic and CQA contents of an infusion kept in a brown container (dark). However, the antioxidant properties and total phenolic and CQA contents were negatively affected when kept in a clear container, suggesting the detrimental effect of light exposure. Our study provides practical recommendations for improving the preparation and storage of herbal infusions, thus catering to the needs of consumers, food scientists, and commercial producers. Moreover, it is the first study of the influence of light exposure on the content of crucial quality attributes within plant-based beverages.

Immunogenicity and safety of Ad26.RSV.preF/RSV preF protein vaccine at predicted intermediate- and end-of-shelf-life as an evaluation of potency throughout shelf life.

This study assessed three Ad26.RSV.preF/RSV preF protein combinations, combining different Ad26.RSV.preF doses and naturally aged preF protein, representing the expected critical vaccine quality attributes close to release, around intermediate shelf-life (ISL) and near-presumed end-of-shelf-life (EoSL), as a way to evaluate the vaccine immunogenicity and safety throughout its shelf-life. A single dose of Ad26.RSV.preF/RSV preF protein vaccine was administered to adults 60-75 years of age. Solicited adverse events (AEs), unsolicited AEs, and serious AEs (SAEs) were assessed for 7-day, 28-day, and 6-month periods after vaccination, respectively. RSV preF-binding antibody concentrations and RSV neutralizing titers were measured 14 days post-vaccination as primary and secondary endpoints, respectively; binding antibodies were also measured 6 months post-vaccination. The RSV preF-binding antibody responses induced by Ad26.RSV.preF/RSV preF protein vaccine lots representing the critical quality attributes around ISL and near presumed EoSL were noninferior to the responses induced by the vaccine lot representing the critical quality attributes near release. The RSV preF-binding and RSV neutralizing antibody levels measured 14 days post-vaccination were similar across the 3 groups. RSV preF-binding antibody concentrations were also similar 6 months post-vaccination. Solicited AEs were mostly mild to moderate in intensity, and a decreased reactogenicity was observed from the Release group to the ISL and EoSL group. None of the reported SAEs were considered related to study vaccination. The study provided evidence of sustained immunogenicity and safety over the intended shelf-life of the Ad26.RSV.pref/RSV preF protein vaccine. The three vaccine lots had acceptable safety profiles.

Unused, expired pharmaceuticals and their disposal practices among the general public in Burdur-Türkiye: a cross-sectional study.

BACKGROUND: Unused pharmaceuticals are currently a public health problem. This study aimed to identify unused pharmaceuticals, research practices about the disposal methods, classify the medicines according to Anatomical Therapeutic Chemical codes (ATC) and, to determine the number of unused medicines. METHODS: The study was designed as a cross-sectional study. Data were collected between April and August 2023 in Burdur-Türkiye by non-probability sampling technique (convenience method). Pharmaceuticals were classified according to ATC. Statistical Package for Social Science SPSS (V.24) package program was used for data analysis. RESULTS: A total of 1120 people, 1005 in the first sample group and 115 in the second sample group, participated in the study. Findings of first sample group: A total of 4097 boxes of unused pharmaceuticals (4.7 ± 4.3 boxes/per capita) were detected. It was found that pharmaceuticals were stored in areas such as kitchens (59.1%) and refrigerators (38.6%), the reason for keeping them was reuse (41%), and the disposal practice was household garbage (81%). Paracetamol (648 boxes), Other cold preparation (303 boxes), Dexketoprofen (239 boxes), Diclofenac (218 boxes), Amoxicillin and beta-lactamase inhibitor (190 boxes) were found to be the most frequently unused pharmaceuticals. Using the unused medicines at home without consulting a physician was 94.1% (self-medication). Findings of second sample group: Of the 6189 dosage forms in 265 boxes pharmaceutical, 3132(50.6%) dosage forms were used and 3057(49.4%) were found to be unused. CONCLUSION: There is a significant amount and number of unused medicines in households, and self-medication is common. Medicines are not properly disposed of and some of them expire. Public information is needed. A "drug take-back system" for unused medicines can be useful in solving this problem.

Colyophilized Sugar-Polymer Dispersions for Enhanced Processing and Storage Stability.

Sucrose and trehalose pharmaceutical excipients are employed to stabilize protein therapeutics in a dried state. The mechanism of therapeutic protein stabilization is dependent on the sugars being present in an amorphous solid-state. Colyophilization of sugars with high glass transition polymers, polyvinylpyrrolidone (PVP), and poly(vinylpyrrolidone vinyl acetate) (PVPVA), enhances amorphous sugar stability. This study investigates the stability of colyophilized sugar-polymer systems in the frozen solution state, dried state postlyophilization, and upon exposure to elevated humidity. Binary systems of sucrose or trehalose with PVP or PVPVA were lyophilized with sugar/polymer ratios ranging from 2:8 to 8:2. Frozen sugar-PVPVA solutions exhibited a higher glass transition temperature of the maximally freeze-concentrated amorphous phase (Tg') compared to sugar-PVP solutions, despite the glass transition temperature (Tg) of PVPVA being lower than PVP. Tg values of all colyophilized systems were in a similar temperature range irrespective of polymer type. Greater hydrogen bonding between sugars and PVP and the lower hygroscopicity of PVPVA influenced polymer antiplasticization effects and the plasticization effects of residual water. Plasticization due to water sorption was investigated in a dynamic vapor sorption humidity ramping experiment. Lyophilized sucrose systems exhibited increased amorphous stability compared to trehalose upon exposure to the humidity. Recrystallization of trehalose was observed and stabilized by polymer addition. Lower concentrations of PVP inhibited trehalose recrystallization compared to PVPVA. These stabilizing effects were attributed to the increased hydrogen bonding between trehalose and PVP compared to trehalose and PVPVA. Overall, the study demonstrated how differences in polymer hygroscopicity and hydrogen bonding with sugars influence the stability of colyophilized amorphous dispersions. These insights into excipient solid-state stability are relevant to the development of stabilized biopharmaceutical solid-state formulations.

A decentralized solid compound storage facility managed by a centralized electronic platform at a growing drug discovery company.

Within a growing drug discovery company, scientists acquire (either through in house synthesis or purchase) then store, retrieve, and ship solid compound samples daily between multiple locations. The efficient management and tracking of this entire process to support drug discovery is a significant challenge. This article describes a decentralized and cost-effective inventory facility that simplifies the solid compound storage and retrieval process. Standardized storage cabinets from the market are utilized, providing a cost-effective physical infrastructure. The cabinets can be distributed across storage rooms at multiple sites and arranged into spaces with a variety of dimensions, allowing the system to be retrofitted into existing facilities and scaled up easily. We can provide storage close to work areas at each location, minimizing both unnecessary movement of staff and transportation of substances. We have applied a systematic barcoding method to the compound batch identifier that correlates with its compound location. This simplifies the compound registration process as well as the process of finding and returning compounds. Additionally, a centralized electronic platform has been employed to store, update and track solid compound information, such as properties, location and quantity. Compound shipment may be initiated from different sites, and a centralized electronic platform assists the information retrieval process, ensuring each location possesses up-to-date information. The electronic platform we present streamlines the management of compound registration, location tracking, weight updates and shipment information, facilitating seamless record sharing among all stakeholders. Every step of the process can be tracked in real time by the project team. The platform can be flexibly configured to adapt to an evolving set of storage locations, with all information and processes being audited.

Is Lyophilization Key for Transportation and Storage of Biopharmaceutical Drug Products in Space?

Long-lasting space missions as well as space tourism are technically possible today and economically in reach. It is a matter of time until the use of biopharmaceutical drug products in space will be common practice. Until drug product manufacturing in space is possible, the products need to be brought to space with rockets, which means that stable and light-weight products are preferred. Lyophilization is a promising approach to reduce weight during transportation and achieve storage stability at room temperature without cold-chain demands. This implies that recycled water in space needs to be used for reconstitution which poses a microbiological challenge and should be considered during formulation development. Furthermore, administration of the injectable drugs in space has an impact on the chosen packaging material which needs to be considered during drug product development.

Amino acids as stabilizers for lysozyme during the spray-drying process and storage.

Amino acids (AAs) have been used as excipients in protein formulations both in solid and liquid state products due to their stabilizing effect. However, the mechanisms by which they can stabilize a protein have not been fully elucidated yet. The purpose of this study was to investigate the effect of AAs with distinct physicochemical properties on the stability of a model protein (lysozyme, LZM) during the spray-drying process and subsequent storage. Molecular descriptor based multivariate data analysis was used to select distinct AAs from the group of 20 natural AAs. Then, LZM and the five selected AAs (1:1 wt ratio) were spray-dried (SD). The solid form, residual moisture content (RMC), hygroscopicity, morphology, secondary/tertiary structure and enzymatic activity of LZM were evaluated before and after storage under 40 °C/75 % RH for 30 days. Arginine (Arg), leucine (Leu), glycine (Gly), tryptophan (Trp), aspartic acid (Asp) were selected because of their distinct properties by using principal component analysis (PCA). The SD LZM powders containing Arg, Trp, or Asp were amorphous, while SD LZM powders containing Leu or Gly were crystalline. Recrystallization of Arg, Trp, Asp and polymorph transition of Gly were observed after the storage under accelerated conditions. The morphologies of the SD particles vary upon the different AAs formulated with LZM, implying different drying kinetics of the five model systems. A tertiary structural change of LZM was observed in the SD powder containing Arg, while a decrease in the enzymatic activity of LZM was observed in the powders containing Arg or Asp after the storage. This can be attributed to the extremely basic and acidic conditions that Arg and Asp create, respectively. This study suggests that when AAs are used as stabilizers instead of traditional disaccharides, not only do classic vitrification theory and water replacement theory play a role, but the microenvironmental pH conditions created by basic or acidic AAs in the starting solution or during the storage of solid matter are also crucial for the stability of SD protein products.

[Translated article] Physicochemical and microbiological stability study of two new preservative-free methylprednisolone eye drops.

OBJECTIVE: To study the physicochemical and microbiological stability over 90 days of two preservative-free methylprednisolone sodium succinate (MTPSS) 1 and 10 mg/mL eye drops for use in ocular pathologies such as Sjögren's syndrome and dry eye syndrome. METHOD: The two eye drops were prepared from injectable MTPSS (Solu-moderin® and Urbason®), water for injection and normal saline solution. In accordance with ICH (International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use) guidelines, they were then stored in triplicate under refrigerated conditions (5±3 °C), at room temperature (25±2 °C), and at 40 °C (±2 °C). In accordance with the USP (United States Pharmacopeia), physicochemical controls of the active ingredient content were carried out by HPLC-UV (High Performance Liquid Chromatography with Ultraviolet detection), together with controls of pH, osmolality, and visual examination. Microbiological sterility was also tested under refrigerated conditions up to 30 days in open containers and up to 90 days in closed ones. RESULTS: The eye drops stored at 5 °C were the most stable; in the 1 mg/mL eye drops, degradation of the drug fell below 90% from day 21, and in the 10 mg/mL eye drops, from day 42. pH change did not vary by ≥1 unit in formulations stored at 5 °C, unlike the other formulations. Changes in osmolality did not exceed 5% on day 90 in any storage conditions. Samples of non refrigerate eye drops at 10 mg/mL, presented a white precipitate from day 14 and 28, respectively. Non-refrigerated 1 mg/mL eye drops presented suspended particles on day 90. There were no color changes. Microbiological analysis showed that sterility was maintained for over 90 days in the closed containers, although microbial contamination was detected from day 21 in the open containers. CONCLUSIONS: 1 mg/mL MTPSS eye drops show physicochemical and microbiological stability for 21 days under refrigeration, compared to 42 days for 10 mg/mL eye drops stored under the same conditions. However, since they do not include preservatives in their composition, they should not be used for more than 7 days after opening.

Physical-chemical Stability of the Extemporaneous Paracetamol Oral Suspension in Puccini Base.

This study describes a new method for the preparation of extemporaneous paracetamol-based suspensions for pediatric and adult patients. This method allows the preparation of extemporaneous suspensions up to concentrations of 50 mg/mL by using a liquid base, named "Puccini". A high-pressure liquid chromatographic method was developed and validated for the determination of chemical stability of paracetamol when the formulations were stored at 4°C and 25°C. The chemical stability of the active pharmaceutical ingredient in the base was demonstrated for more than 90 days. Visual analyses of the formulations showed a phenomenon of precipitation at both storage temperatures, but the simple agitation of the formulations before its use re-established the formation of homogeneous suspensions.

Effectiveness of the online-eLearning program KeepCoool at improving the vaccine cold chain in general practices.

BACKGROUND: Protecting vaccines from freeze damage is a poorly addressed problem. We describe the effectiveness of the eLearning KeepCoool on cold chain maintenance in general practices. METHODS: For this intervention study, temperatures of vaccine refrigerators were logged at one-minute intervals. Personnel from practices with cold chain breaches was offered the eLearning. The primary outcome was the intervention's effectiveness to achieve temperatures in the target range (2 to 8°C) in the sixth week (follow-up) compared to the first (baseline). Using continuous temperature data, a generalized additive model for location, scale and shape was estimated. RESULTS: The practice response rate was 38% (64 of 168). At baseline, 73% of the practices and 68% of the refrigerators (51 of 75) showed cold chain breaches. 47% of the practices (n = 22 with 24 refrigerators) participated in the eLearning (55 physicians and practice assistants). At follow-up, 17% of those refrigerators were in the target range continuously, 38% reached targets 95% of the time while always >0°C, and temperatures ≤0°C decreased by 63%. Based on 2 million temperature data, the average Euclidian distance based on regression showed a significant improvement (p<0.05). CONCLUSION: The eLearning KeepCoool improved the practices´ vaccine cold chain. It is freely available at https://keepcoool.ukbonn.de.

Storage, Disposal, and Use of Opioids Among Cancer Patients in Central China: A Multi-Center Cross-Sectional Study.

OBJECTIVE: Unsafe opioid-related practices can lead to abuse, diversion, and accidental overdoses. In this study, we aimed to describe the patterns and beliefs regarding the storage, disposal, and use of opioids among Chinese patients with cancer in their home settings, which remain unclear. METHODS: A multicenter cross-sectional survey was conducted in Hubei Province from October 2022 to June 2023. We collected information on the storage, disposal, and use of opioids among cancer pain inpatients in the oncology department. Logistic regression was used to estimate the factors associated with unsafe disposal and use of opioids. RESULTS: The survey included 221 patients with a median age of 62 years. Only 3.2% stored their opioids under lock and key, and 49.8% were unaware of proper disposal methods. Nearly one-fifth (19.5%) reported having received information on the safe storage (14.0%) and/or disposal (10.0%) of opioids. A total of 44.3% reported unsafe use by sharing (1.8%), losing (4.1%), or taking opioids at a higher dose than prescribed (42.5%). Patients who did not receive information on the safe disposal of opioids (OR = 4.57, P = .0423), had a history of alcohol use (OR = 1.91, P = .0399), and used opioids other than morphine (OR = 2.31, P = .0461) had higher odds of unsafe disposal practices. Individuals with an associate degree/bachelor's degree or above were less likely to dispose of (OR = 0.36, P = .0261) and use (OR = 0.31, P = .0127) opioids unsafely. CONCLUSION: A significant proportion of Chinese patients with cancer exhibit unsafe practices in the storage, disposal, and use of opioids. The study highlights an urgent need for implementing routine education programs and drug "take-back" initiatives to improve opioid-related practices.

Physicochemical and microbiological stability study of two new preservative-free methylprednisolone eye drops. / Estudio de estabilidad fisicoquímica y microbiológica de dos nuevos colirios de metilprednisolona sin conservantes.

OBJECTIVE: To study the physicochemical and microbiological stability over 90 days of two preservative-free methylprednisolone sodium succinate (MTPSS) 1 mg/ml and 10 mg/ml eye drops for use in ocular pathologies such as Sjögren's syndrome and dry eye syndrome. METHOD: The two eye drops were prepared from injectable MTPSS (Solu-moderin® and Urbason®), water for injection and normal saline solution. In accordance with ICH (International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use) guidelines, they were then stored in triplicate under refrigerated conditions (5 ±3 °C), at room temperature (25 ± 2 °C), and at 40 °C (±2 °C). In accordance with the USP (United States Pharmacopeia), physicochemical controls of the active ingredient content were carried out by HPLC-UV (High Performance Liquid Chromatography with Ultraviolet detection), together with controls of pH, osmolality, and visual examination. Microbiological sterility was also tested under refrigerated conditions up to 30 days in open containers and up to 90 days in closed ones. RESULTS: The eye drops stored at 5 °C were the most stable; in the 1 mg/ml eye drops, degradation of the drug fell below 90% from day 21, and in the 10 mg/ml eye drops, from day 42. pH change did not vary by ≥1 unit in formulations stored at 5 °C, unlike the other formulations. Changes in osmolality did not exceed 5% on day 90 in any storage conditions. Samples of non refrigerate eye drops at 10 mg/ml, presented a white precipitate from day 14 and 28 respectively. Non-refrigerated 1 mg/ml eye drops presented suspended particles on day 90. There were no color changes. Microbiological analysis showed that sterility was maintained for over 90 days in the closed containers, although microbial contamination was detected from day 21 in the open containers. CONCLUSIONS: 1 mg/ml MTPSS eye drops show physicochemical and microbiological stability for 21 days under refrigeration, compared to 42 days for 10 mg/ml eye drops stored under the same conditions. However, since they do not include preservatives in their composition, they should not be used for more than 7 days after opening.

Psychotropic medicine use without current or prior medical advice, storage at home and association with perceived stress in a primary health care setting in Greece / Uso de medicamentos psicotrópicos sin consejo médico actual o previo, almacenamiento en el hogar y asociación con estrés percibido en un entorno de atención primaria en Grecia

Objective: Psychotropic medicines use alters according to socio-economic factors and perceived stress. The study aimed to assess the prevalence of use of psychotropic medicines and supplements (PMS) without medical advice, including storage at home, and its relationship with socio-demographic characteristics and perceived stress in primary care patients. Materials and methods: A cross-sectional sample of adult attendees in an urban primary care unit in Crete, Greece, were surveyed during regularly scheduled appointments during a three-week period in October 2020. A questionnaire was distributed to investigate PMS use during the last 12 months. The validated Greek version of Perceived Stress Scale (PSS-14) was adopted to measure perceived stress. Results: Of 263 respondents (mean age 46.3±14.5 years; 66.5% females), 101 (38.4%; 95%CI 33.1–43.7%) recalled having psychotropic medicines stored at home cabinets and 72 (27.4%; 95%CI 22.4–32.3%) reported using PMS without medical advice in the last 12 months. Conclusions: This study revealed a high prevalence of PMS use without medical advice, including storage at home. People>59 years of age, experiencing irregular sleep and scoring high in PSS, displayed increased prevalence of storing PMS at home or using them without medical advice. The findings could potentially inform primary care providers to focus on patients most likely to be users of PMS without medical advice.(AU)

Objetivo: El uso de medicamentos psicotrópicos cambia según los factores socioeconómicos y el estrés percibido. El estudio tuvo como objetivo evaluar la prevalencia de uso de medicamentos y suplementos psicotrópicos (MSP) sin consejo médico, incluido el almacenamiento en el hogar y su relación con las características sociodemográficas y el estrés inferido en pacientes de atención primaria. Materiales y métodos: Se encuestó a una muestra transversal de asistentes adultos en una Unidad de Atención Primaria Urbana en Crete, Grecia, durante citas programadas regularmente durante un periodo de tres semanas en Octubre de 2020. Se distribuyó un cuestionario para investigar el uso de MSP durante los últimos 12 meses. Se adoptó la versión griega validada de la Escala de Estrés Percibido (Perceived Stress Scale 14, PSS-14) para medir el estrés percibido. Resultado: De 263 encuestados (edad media 46,3 ± 14,5 años; 66,5% mujeres), 101 (38,4%; IC 95%; 33,1-43,7%) recordaban tener medicamentos psicotrópicos almacenados en los armarios de sus casas y 72 (27,4%; IC 95%; 22,4-32,3%) informó haber usado MSP sin consejo médico en los últimos 12 meses. Conclusiones: Este estudio reveló una alta prevalencia de uso de MSP sin consejo médico, incluido el almacenamiento en el hogar. Las personas mayores de 59 años, que experimentaron sueño irregular y puntuaron alto en PSS, mostraron una mayor prevalencia de almacenar MSP en casa o usarlos sin consejo médico. Los hallazgos podrían informar potencialmente a los proveedores de atención primaria para que se centren en los pacientes con mayor probabilidad de usar MSP sin consejo médico.(AU)

Storage Conditions Influence the Quality of Ginger - A Stability Study Inspired by Clinical Trials.

Ginger has traditionally been used to treat and prevent nausea and vomiting; however, the results of clinical trials are ambiguous. The efficacy of ginger is attributed to gingerols and their metabolites, shogaols. Since these compounds have different pharmacological profiles, the clinical efficacy of ginger products is largely dependent on their chemical composition. The goal of our study was to examine the stability of ginger, determining the 6-gingerol contents in order to assess the effects of different storage conditions. We have performed a 6-month stability test with dry ginger rhizome samples stored in a constant climate chamber in three different storage containers (uncovered glass container, glass container sealed with rubber stopper, and plastic container). The 6-gingerol contents were measured by HPLC method. The concentration of 6-gingerol decreased in all samples. In the sealed glass container, the decrease in 6-gingerol content was significantly lower than in the unsealed glass container and in the plastic container. These results demonstrate that storage conditions have a significant impact on the quality of ginger, which may also affect efficacy.

Freeze-drying of bupivacaine lipospheres: preparation, characterization, and evaluation of anti-microbial properties.

PURPOSE: To prepare freeze-dried bupivacaine lipospheres intended for topical application in burn injuries. The aim was improving the storage stability and developing a prolonged release pattern to tackle the adverse reactions resulting from the frequent administration of bupivacaine. METHODS: The lipospheres were prepared by hot-melt dispersion method employing bupivacaine base at 1.5 and 3%w/w, tristearin 6% w/w as the core while dipalmitoyl phosphatidylcholine (DPPC) and soy phosphatidylcholine (SPC) as the coat at 0.75, 1.5 and 3% w/w. The lotion was then freeze-dried and cryoprotected by sucrose 3% w/w. Evaluation was carried out through loading and release analysis, storage study, particle characterization including morphology, zeta potential and particle size as well as anti-microbial assessment. RESULTS: The highest loading, (87.6 ± 0.1%), was achieved using bupivacaine 3% and SPC 0.75%. After 6 months of storage at 4 ͦC, the loading in the lotion and the freeze-dried samples were 17.4 ± 0.2 and 87.2 ± 0.3%, respectively. In vitro dissolution test demonstrated 94.5% and 95% of bupivacaine release from lotion and freeze-dried samples, after 24 h. The respective zeta potential of -1.30 and 26 mV was recorded for lotion and solid-state bupivacaine. Micromeritic evaluation of freeze-dried powder exhibited particle size of 35.23 ± 2.02 µm and highly-wrinkled-irregular morphology without detectable needle structures related to drug free crystals. The powder had rapid reconstitution property and antibacterial activity. CONCLUSION: Freeze- drying holds a promising potential to improve the storage stability of bupivacaine lipospheres with well- preserved release pattern and particle properties for further topical application.

The effect of emulgel preparation on the stability of Kojic acid in the topical anti-hyperpigmentation products.

BACKGROUND: The emulgel, a novel drug delivery system, merges emulsion and gel, offering advantages like enhanced stability, precise control over drug release kinetics, and increased drug absorption compared to emulsions alone. Kojic acid (KA) demonstrates potent inhibition of the tyrosinase enzyme, a crucial player in the melanin synthesis pathway. AIMS: The main objective of this experimental study is to formulate KA within an emulgel framework and assess its stability under various environmental conditions. METHODS: One percent of KA emulgel and 1% simple gel, serving as the control product, were supplemented with varying concentrations of sodium metabisulfite (SMBS) for its antioxidant properties. The formulations were segregated into four groups and subjected to diverse maintenance and stress conditions over a three-month period. Monthly evaluations of physicochemical alterations were conducted, initially employing digital photography, followed by the extraction of KA and subsequent quantification of its concentration through high performance liquid chromatography (HPLC). RESULTS: The best formulations for retaining KA among the prepared ones were the 0.25% SMBS KA emulgel and the 0.1% SMBS KA simple gel, capable of retaining 86% and 76% of the initial KA content under stress conditions, respectively (p < 0.0001). CONCLUSIONS: Regarding to this study, ideal storage condition for KA emulgel and simple gel is in the refrigerator temperatures. Moreover, optimal SMBS concentrations for stability enhancement are 0.25% for emulgel and 0.1% for the simple gel. A significant statistical difference was observed between refrigerated emulgel and simple gel in the retention of KA in the presence of optimum concentration of antioxidants (p < 0.0001).

A Modern Approach to Stability Studies via Bayesian Linear Mixed Models Incorporating Auxiliary Effects.

In preparation to the launch of a pharmaceutical product, an estimate of its shelf life via stability testing is required by regulatory agencies. The ICH-Q1E guidance has been the worldwide reference to reach this objective, but in recent years several authors have criticized many of its aspects. To that end we discuss a complete Bayesian transcript of the ICH-Q1E, treating all the apparent shortcomings, while also addressing the presence of multiple batches using a linear mixed model (LMM) for proper shelf life prediction by explicitly modelling the batch-to-batch variability. This comprises a redefinition of the linear models proposed in the ICH-Q1E by suitable LMM counterparts, and a Bayesian analogue for model selection, which is more intuitive and remedies detrimental features of the ICH approach. In that context, a proper mathematical foundation of shelf life is provided that we use to investigate and mathematically compare the two available approaches to shelf life determination via shelf life distribution and batch distribution. The discussed method is then tested and evaluated using real data in comparison with the ICH-Q1E approach demonstrating their approximate equivalency for 6 batches. As a major objective, we extended the LMM with auxiliary fixed effects, here the concentration, which interconnect data sets allowing a prediction of shelf lives for concentrations lacking a sufficient number of batches. This establishes a novel approach to accelerate the speed to submission while retaining the patients' safety. Both case studies underline the inherent superiority of LMMs within a Bayesian framework regarding predictability and interpretability, and we hope that the relevant authorities will accept this approach in the future.