The Asymmetry Within: A Renewed Look at Cupids Bow in Unilateral Cleft Lip.

The purpose of this study is to analyze the angular variations within Cupid's bow in patients with unoperated unilateral cleft lip (UCL). Angular features of Cupid's bow were quantified in standardized presurgical photographs of children with UCL by 5 medical professionals specializing in craniofacial anomalies. The peaks and valley of Cupid's bow were identified. A cleft side (CSA) and a noncleft side angle (NCSA) were delineated and measured by each expert. The data was pooled, and the angles were analyzed for symmetry. Cupid's bow asymmetry was defined as a difference between NCSA and CSA ≥3°. Of the 37 patients studied, 29 were found to have asymmetry of Cupid's bow with an average angle difference of 8.0° (95% CI: 6.6°-9.5°). Within this group,15 patients were found with acute asymmetry and 14 with obtuse asymmetry. Geometric analysis was performed on an example of a patient with acute asymmetry to demonstrate how correction of asymmetry can be considered during surgical repair. There is an asymmetry that exists in the Cupid's bow of a significant number of patients with unoperated UCL. This finding not only adds to our understanding of UCL but may also have important implications when selecting the method/technique of surgical repair.

Assessment of Masseter Volume and Postoperative Stability After Orthognathic Surgery in Patients With Skeletal Class III Malocclusion With Facial Asymmetry.

OBJECTIVE: This study aimed to evaluate the effect of orthognathic surgery on masseter volume in patients with skeletal Class III malocclusion with facial asymmetry and the effect of masseter volume on stability in orthognathic surgery. METHODS: This research studied 16 patients with Class III malocclusion with facial asymmetry who received combined orthodontic-orthognathic treatment and underwent craniofacial computed tomography (CT) before (T0), 2 weeks after (T1), and 6 months after (T2) surgery. Three-dimensional (3D) CT images were retrospectively analyzed, using 3D volume reconstruction to obtain the masseter volume and examine the impact of the masseter volume on stability in orthognathic surgery. RESULTS: A statistically significant difference ( P < 0.05) in the volume of the masseter was found up to 6 months after orthognathic surgery compared with the preoperative period, and the reduction in the masticatory muscle volume on the lengthened side is greater than on the shortened side ( P < 0.05). The volume of both masseters differed according to facial asymmetry, and the difference was significantly reduced after orthognathic surgery ( P < 0.05). During the period time (T1-T2), cephalometric maxillary marker points were not significantly different ( P > 0.05), and mandibular marker points were significantly anteriorly shifted ( P < 0.05). There was an association between the masseter volume and anterior shift of point B (R > 0.5, P < 0.05), the upward and anterior shifts of the gonion point differed between the lengthened and shortened sides ( P < 0.05). CONCLUSION: The size of the masseter becomes smaller 6 months after orthognathic surgery, and orthognathic surgery improves both bone and soft tissue symmetry. A larger sagittal relapse of mandibular setback occurred in patients with greater masseter volume. Considering these alterations may be helpful in planning orthognathic surgery.

Automatic extraction of facial median sagittal plane for patients with asymmetry based on the EDMA alignment algorithm.

BACKGROUND: We aimed to establish a novel method for automatically constructing three-dimensional (3D) median sagittal plane (MSP) for mandibular deviation patients, which can increase the efficiency of aesthetic evaluating treatment progress. We developed a Euclidean weighted Procrustes analysis (EWPA) algorithm for extracting 3D facial MSP based on the Euclidean distance matrix analysis, automatically assigning weight to facial anatomical landmarks. METHODS: Forty patients with mandibular deviation were recruited, and the Procrustes analysis (PA) algorithm based on the original mirror alignment and EWPA algorithm developed in this study were used to construct the MSP of each facial model of the patient as experimental groups 1 and 2, respectively. The expert-defined regional iterative closest point algorithm was used to construct the MSP as the reference group. The angle errors of the two experimental groups were compared to those of the reference group to evaluate their clinical suitability. RESULTS: The angle errors of the MSP constructed by the two EWPA and PA algorithms for the 40 patients were 1.39 ± 0.85°, 1.39 ± 0.78°, and 1.91 ± 0.80°, respectively. The two EWPA algorithms performed best in patients with moderate facial asymmetry, and in patients with severe facial asymmetry, the angle error was below 2°, which was a significant improvement over the PA algorithm. CONCLUSIONS: The clinical application of the EWPA algorithm based on 3D facial morphological analysis for constructing a 3D facial MSP for patients with mandibular deviated facial asymmetry deformity showed a significant improvement over the conventional PA algorithm and achieved the effect of a dental clinical expert-level diagnostic strategy.

Facial Asymmetry Caused by Mandibular Condylar Hyperplasia: A Two Center Study.

BACKGROUND: Condylar hyperplasia is a non-neoplastic overgrowth of the mandibular condyle. The disorder is progressive and causes gradual jaw deviation, facial asymmetry, and dental malocclusion. The only treatment capable of stopping hyperplastic growth is surgical condylectomy to remove the upper portion of the condyle containing the deranged growth center. When this procedure is conducted in proportion to the length of the healthy side it may also correct the jaw deviation and facial asymmetry. OBJECTIVES: To assess the degree to which condylectomy corrects the asymmetry and to determine the proportion of patients after condylectomy who were satisfied with the esthetic result and did not desire further corrective surgery. METHODS: We conducted a retrospective analysis of medical records of patients who underwent condylectomy that was not followed by corrective orthognathic surgery for at least 1 year to determine the degree of correction of chin deviation and lip cant. Patient satisfaction from treatment or desire and undergo further corrective surgery was reported. RESULTS: Chin deviation decreased after condylectomy from a mean of 4.8° to a mean of 1.8° (P < 0.001). Lip cant decreased after condylectomy from a mean of 3.5° to a mean of 1.5° (P < 0.001). Most patients (72%) were satisfied with the results and did not consider further corrective orthognathic surgery. CONCLUSIONS: Proportional condylectomy could be a viable treatment to both arrest the condylar overgrowth and achieve some correction of the facial asymmetry.

Site and severity of facial asymmetry after bimaxillary surgery for class III deformity: a case-control study.

OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.

[Growth disturbances of the temporomandibular joint: causes, diagnosis and treatment]. / Groeistoornissen van het kaakgewricht: oorzaken, diagnose en behandeling.

Growth disturbances of the temporomandibular Joint are characterized by mandibular asymmetry, sometimes with secondary maxillar disturbances. Although the clinical symptoms are sometimes quite severe, patients usually have no pain. There are several growth disturbances, but in this article we discuss three particular causes of facial asymmetry, namely hemimandibular growth defects; overdevelopment, underdevelopment and neoplasms of the mandibular joint. Hemimandibular overdevelopment (hyperplasia) is a growth disorder characterized by progressive asymmetry of the mandibula. Hemimandibular hypoplasia, on the other hand, is a growth disorder involving underdevelopment of the condyle mandibulae due to impingement of the growth center and ankylosing. A pronounced asymmetrical face can cause aesthetic problems and always requires diagnostics, because in addition to the hyperplasia and hypoplasia mentioned above, other causes can explain the asymmetry such as, for example, an osteoarthritis or even a tumor emanating from the base of the skull, mandibula or soft tissues.

Establishment of the mid-sagittal reference plane for three-dimensional assessment of facial asymmetry: a systematic review : Establishment of the mid-sagittal reference plane: a systematic review.

OBJECTIVE: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry. MATERIALS AND METHODS: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively. RESULTS: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability. CONCLUSION: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required. CLINICAL RELEVANCE: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

The Evaluation of Condylar Position Change in the Asymmetric Mandible Following Sagittal Split Osteotomy.

BACKGROUND: The change of condyle position following orthognathic surgery affects the stability of treatments. This study aims to assess the correlation between the amount of condyles' position change and the severity of mandibular asymmetry following BSSO. MATERIALS AND METHODS: This is a cross-sectional study. Subjects with asymmetric mandibular prognathism following BSSO were studied. Subjects were classified into 2 groups: group 1, subjects had mandibular asymmetry without occlusal cant and underwent BSSO. Group 2, subjects had mandibular asymmetry with occlusal cant and underwent BSSO+ Lefort I osteotomy. The condyle position was evaluated using cone-beam computer tomography (CBCT). Pearson's correlation test was used to assess any correlation between the condyle changes and the change in the mandible in sagittal and anterior-posterior directions. RESULTS: A total of 44 subjects were studied. In group 1, the condyle tilted outward in the deviated condyle and inward in the non-deviated condyle immediately after osteotomy. After 12 months, both condyles showed a rotation relative to the original position. In group 2, the condyles of the deviated sides and non-deviated sides moved inferiorly after surgery (condylar sagging), which was more significant in the non-deviated sides. The condyle rotation was similar to group 1. The severity of asymmetry and occlusal cant correlate with the condylar position change in the two groups. CONCLUSION: The severity of mandibular asymmetry correlates with the amount of condyles' position change immediately after BSSO. However, the condyles tend to return to their original position 12 months later.

Changes in masseter muscle morphology after surgical-orthodontic treatment in patients with skeletal Class III malocclusion with mandibular asymmetry: The automatic masseter muscle segmentation model.

INTRODUCTION: This study evaluated the masseter muscle changes after surgical-orthodontic treatment in patients with a skeletal Class III malocclusion using automatic segmentation. METHODS: Images of 120 patients with skeletal Class III malocclusion were obtained and reconstructed at T0 (pretreatment), T1 (presurgery), and T2 (6-12-month postsurgery). The patients were divided into symmetrical and asymmetrical groups. The volume, major axis length, maximum cross-sectional area, horizontal cross-sectional area 5 mm above the mandibular foramen (CSAF), and orientation were calculated automatically. RESULTS: In the asymmetrical group, the volume and major axis length on the deviated side were lower than on the nondeviated side at T0, T1, and T2 (P <0.05). There were no significant differences in maximum cross-sectional area and CSAF bilaterally. The orientation was coronally more vertical and sagittally more forward on the deviated side (both P <0.001). In the symmetrical group, there were no significant bilateral differences at T0, T1, and T2. The volume, major axis length, and CSAF decreased, and the coronal orientation was more vertical on the nondeviated side at T2 than at T0 in both groups (P <0.05). The coronal plane orientation was more inclined on the deviated side at T2 than at T0 in the asymmetrical group (P <0.05). CONCLUSIONS: The smaller volume on the deviated side at T2 indicates the need for myofunctional training after surgery. The masseter muscle volume and the cross-sectional area did not recover to the preorthodontic levels. Studies with longer follow-up durations are needed to confirm these findings.

Symmetry recovery in zygomaticomaxillary complex fractures compared to normal unfractured population: A new reliable 3D evaluation.

OBJECTIVE: This study aims to quantify the facial symmetry of surgically treated zygomaticomaxillary complex (ZMC) fractures through a new reliable three-dimensional evaluation method, which is crucial for improving post-operative aesthetic and functional outcomes. MATERIAL AND METHODS: Healthy patients and patients with surgically treated ZMC fractures were retrospectively reviewed. Using Brainlab Elements® the zygomatic bone and the orbit of each patient was segmented and mirrored. Subsequently, the mirrored side was matched with the other side via volume-based registration, using the segmented orbit as reference. Volumetric asymmetry was measured using 3-matic software, and a surface-based matching technique was used to calculate the mean absolute differences (MAD) between the surfaces of the two sides of the ZMC. The reliability of this novel method using volume-based registration was tested, and the intra-class correlation coefficient was assessed. RESULTS: The MAD between the surfaces of the left and right sides in the control group was 0.51 mm (±0.09). As for the ZMC fracture group, MAD was 0.78 mm (±0.20) and 0.72 mm (±0.15) pre- and post-operatively, respectively. The MAD showed statistically significant differences between pre- and post-operative groups (p = 0.005) and between control and post-operative groups (p < 0.001). The intra-class correlation coefficient was high (≥0.99). CONCLUSIONS: This evaluation method using mirroring and volume-based registration to determine the symmetrical position of the ZMC is reliable. The surface-based measurements revealed an improved symmetry after surgery. However, the symmetry of the treated patients remained lower than the control group.

Using craniofacial fluctuating asymmetry to examine the effects of sex, socioeconomic status, and early life experiences on adult age at death in industrial England.

OBJECTIVES: Historical evidence from 18th- and 19th-century England suggests that industrialization's impacts on health were largely negative, especially among marginalized groups. However, available documentary evidence is often biased toward adult men and rarely sheds light on the experiences of other members of the population, such as women and children. Craniofacial fluctuating asymmetry (FA) can serve as a proxy measurement of developmental instability and stress during development. This study examines the associations among age, sex, socioeconomic status (SES), and FA in skeletal samples from industrial-era England. MATERIALS AND METHODS: The sample for this study comes from four industrial-era cemeteries from England (A.D. 1711-1857). Geometric morphometric analyses of three-dimensional landmark coordinate data were used to generate a measure of FA for each individual (Mahalanobis distance). A three-way ANOVA was used to evaluate the impacts of sex, SES, and FA scores on adult age at death (n = 168). RESULTS: Significant associations existed between age at death and SES (p = 0.004) and FA scores (p = 0.094). Comparisons of the estimated means indicated that age at death was consistently higher among high SES individuals and individuals with FA scores less than one standard deviation from the mean. CONCLUSIONS: This study supports findings from previous studies that have suggested that the differences in resource access and environmental buffering generated by socioeconomic inequality can impact longevity and patterns of mortality among socioeconomic status groups. Likewise, stress in early life-evinced by craniofacial fluctuating asymmetry-can influence observed patterns of longevity in adults decades later.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Facial asymmetry of the hard and soft tissues in skeletal Class I, II, and III patients.

To investigate and compare the facial asymmetry (hard and soft tissues) among skeletal Class I, II, and III patients. A total of 221 subjects, including skeletal Class I (n = 80), skeletal Class II (n = 75), and skeletal Class III (n = 66), were included in the study. CBCT, 22 skeletal landmarks, and 10 soft tissue landmarks were used for the measurements and the asymmetry index was calculated to assess the facial asymmetry. Statistical analyses included one-way ANOVA, Kruskal-Wallis test, and Spearman correlation analysis. The skeletal Class III patients presented greater asymmetry than Class II patients for 10 hard tissue landmarks and 3 soft tissue landmarks (p < 0.05). High correlation of asymmetry was found between four soft tissue landmarks and their corresponding skeletal landmarks (rs ≥ 0.71), as well as Me and ANS (r > 0.86). The ANS and Me in 21.3% patients deviated to contralateral sides. The skeletal Class III patients had more facial asymmetry than the Class II patients. Soft tissues showed similar asymmetry as the underlying hard tissues rather than a compensation of the hard tissue asymmetry. The inconsistency in the deviation of Me and ANS may exacerbate facial asymmetry.

Mandibular Distraction Osteogenesis in Children and Adolescents: A Clinical and Radiographic Research Using Cone-Beam Computed Tomography.

AIM: The aim of this cross-sectional study was to evaluate, via cone-beam computed tomography, the long-term postoperative outcome in children treated with mandibular distraction osteogenesis. MATERIALS AND METHODS: All young patients treated with mandibular distraction osteogenesis (MDO), during a 16-year period, at the University Department of Oral and Maxillofacial Surgery of a Pediatric Hospital, were recalled, and various clinical and radiographic parameters were recorded. RESULTS: Eleven patients were included: 5 with hemifacial microsomia (HFM) and 6 with mandibular micrognathia. In all cases, MDO had been successful in regular follow-up and decannulation, soon after MDO, was achieved in all tracheostomy cases. The long-term result in cases of HFM was found stable, functionally and esthetically accepted, although less satisfactory than in regular follow-up; in micrognathia patients, relapse of different degrees was registered in 4 of 6 cases, without any need for tracheostomy though. Detailed and accurate information was obtained by cone-beam computed tomography (CBCT). The shape of the regenerated bone was irregular in HFM cases and relatively normal in the micrognathia cases. Quality of the regenerated bone was normal in all patients. The irregular shape registered in HFM cases did not compromise a safe orthognathic operation. CONCLUSIONS: Distraction osteogenesis remains an early treatment choice in cases of mandibular deformities. Long-term findings showed that there is a degree of relapse with growth, which was more obvious in mandibular micrognathia cases. Computed tomography contributes to detailed evaluation of changes at the distraction site.

[Preliminary evaluation of chin symmetry with three dimentional soft tissue spatial angle wireframe template].

OBJECTIVE: To develop an efficient and robust method based on three dimensional facial landmarks for evaluating chin region asymmetry at the soft tissue level and to compare it with the traditional mirror-overlap analysis method in order to test its availability. METHODS: Standard symmetrical face was used for mental tubercle coordinate transformation so as to filter soft tissue three dimensional spatial angle and construct corresponding three dimensional spatial angle wireframe template. Ten patients aged 12-32 years with clinical chin region asymmetry diagnosis at the Department of Orthodontics of Peking University Hospital of Stomatology from November 2020 to November 2021 were randomly selected. Three dimensional soft tissue face scan data of the patients were collected by three dimensional face scanner and the landmark points were automatically determined by the Meshmonk non-rigid registration algorithm program, and in this way, the asymmetric three dimensional spatial angle wireframe template and corresponding spatial angle parameters were generated. Mirror-overlap analysis of face scan data was also performed in Geomagic Studio 2015 software and deviation color maps were generated. This study took mirror-overlap analysis as the gold standard method, the response rate of chin region asymmetry was eva-luated by the outcomes of the mirror-overlap analysis and three dimensional spatial angle wireframe template analysis. RESULTS: Nine three dimensional spatial angle indicators were selected through coordinate transformation, and the response rate was calculated using mirror-overlap analysis as the gold standard method. Among these ten selected patients, the response rate of the total chin region asymmetry was 90% (9/10). Using the deviation value of mirror-overlap analysis as a reference, the response rate of chin region asymmetry in the X dimension was 86%, the response rate of chin region asymmetry in the Y dimension was 89%, and the response rate of chin region asymmetry in the Z dimension was 100%. CONCLUSION: The three dimensional soft tissue spatial angle wireframe template proposed in this study has some feasibility in evaluating chin region asymmetry at the soft tissue level, and its ability to recognize asymmetry separately in the three dimensional direction is better than the mirror-overlap analysis method, and the indicators recognition rate still needs to be further improved.

A proposed protocol for correlation between bone density in hemimandibular hyperplasia radiography and histopathological findings - A retrospective study.

The role of low-dose computed tomography (LDCT) in surgical planning can be assessed based on the correlation among bone density (BD/HU), radiographic values, and the histopathological appearance of hyperplastic overgrowth in mandibular condyles (hemimandibular hyperplasia/osteochondroma). The aim of this study was to evaluate the correlation between LDCT indices of bone-density measurements in surgical planning and histopathological specimens. The patients incuded in this study underwent detailed radiological evaluation as preparation for further clinical procedures. Excised condyles were evaluated in terms of bone density index using LDCT, and then histopathologically to investigate the accuracy of surgical procedures and set the basis for future surgical planning. An index value between both condyles' bone densities represented the relative difference between the healthy condyle and the side with hemimandibular hyperplasia (HH). Patients with unilateral condylar hyperplasia (UCH) showed a statistical correlation between condyle heads with increased bone density (BD) and scintigraphic (SCI) values (p < 0.001). On the other hand, correlation between BD and histopathological studies alone was significant (p < 0.001). With the increase in BD measured in HU in UCH condyles, the overall value of fibrous cartilage layer thickness decreased (p < 0.001). Furthermore, histopathological evaluation indicated that increased bone density on the UCH side resulted in increased total thickness (p > 0.001). The proposed index measurements in the mandibular condyles based on LDCT/BD can be used to estimate the degree of required surgical resection. Results from LDCT radiographic studies correlate with histopathological specimens more than scintigraphy.

Skeletal facial asymmetry: reliability of manual and artificial intelligence-driven analysis.

OBJECTIVES: To compare artificial intelligence (AI)-driven web-based platform and manual measurements for analysing facial asymmetry in craniofacial CT examinations. METHODS: The study included 95 craniofacial CT scans from patients aged 18-30 years. The degree of asymmetry was measured based on AI platform-predefined anatomical landmarks: sella (S), condylion (Co), anterior nasal spine (ANS), and menton (Me). The concordance between the results of automatic asymmetry reports and manual linear 3D measurements was calculated. The asymmetry rate (AR) indicator was determined for both automatic and manual measurements, and the concordance between them was calculated. The repeatability of manual measurements in 20 randomly selected subjects was assessed. The concordance of measurements of quantitative variables was assessed with interclass correlation coefficient (ICC) according to the Shrout and Fleiss classification. RESULTS: Erroneous AI tracings were found in 16.8% of cases, reducing the analysed cases to 79. The agreement between automatic and manual asymmetry measurements was very low (ICC < 0.3). A lack of agreement between AI and manual AR analysis (ICC type 3 = 0) was found. The repeatability of manual measurements and AR calculations showed excellent correlation (ICC type 2 > 0.947). CONCLUSIONS: The results indicate that the rate of tracing errors and lack of agreement with manual AR analysis make it impossible to use the tested AI platform to assess the degree of facial asymmetry.