Advances in the Synthesis of Biologically Active Quaternary Ammonium Compounds.

This review provides a comprehensive overview of recent advancements in the design and synthesis of biologically active quaternary ammonium compounds (QACs). The covered scope extends beyond commonly reviewed antimicrobial derivatives to include synthetic agents with antifungal, anticancer, and antiviral properties. Additionally, this review highlights examples of quaternary ammonium compounds exhibiting activity against protozoa and herbicidal effects, as well as analgesic and anesthetic derivatives. The article also embraces the quaternary-ammonium-containing cholinesterase inhibitors and muscle relaxants. QACs, marked by their inherent permanent charge, also find widespread usage across diverse domains such as fabric softeners, hair conditioners, detergents, and disinfectants. The effectiveness of QACs hinges greatly on finding the right equilibrium between hydrophilicity and lipophilicity. The ideal length of the alkyl chain varies according to the unique structure of each QAC and its biological settings. It is expected that this review will provide comprehensive data for medicinal and industrial chemists to design and develop novel QAC-based products.

Superabsorbent quaternary ammonium guar gum hydrogel with controlled release of humic acid for soil improvement and plant growth.

Growing plants in karst areas tends to be difficult due to the easy loss of water and soil. To enhance soil agglomeration, water retention, and soil fertility, this study developed a physically and chemically crosslinked hydrogel prepared from quaternary ammonium guar gum and humic acid. The results showed that non-covalent dynamic bonds between the two components delayed humic acid release into the soil, with a release rate of only 35 % after 240 h. The presence of four hydrophilic groups (quaternary ammonium, hydroxyl, carboxyl, and carbonyl) in the hydrogel more than doubled the soil's water retention capacity. The interaction between hydrogel and soil minerals (especially carbonate and silica) promoted hydrogel-soil and soil­carbonate adhesion, and the adhesion strength between soil particles was enhanced by 650 %. Moreover, compared with direct fertilization, this degradable hydrogel not only increased the germination rate (100 %) and growth status of mung beans but also reduced the negative effects of excessive fertilization on plant roots. The study provides an eco-friendly, low-cost, and intelligent system for soil improvement in karst areas. It further proves the considerable application potential of hydrogels in agriculture.

Synthesis, Electronic, and Antibacterial Properties of 3,7-Di(hetero)aryl-substituted Phenothiazinyl N-Propyl Trimethylammonium Salts.

In this study, a library of 3,7-di(hetero)aryl-substituted 10-(3-trimethylammoniumpropyl)10H-phenothiazine salts is prepared. These title compounds and their precursors are reversible redox systems with tunable potentials. The Hammett correlation gives a very good correlation of the first oxidation potentials with σp parameters. Furthermore, the title compounds and their precursors are blue to green-blue emissive. Screening of the salts reveals for some derivatives a distinct inhibition of several pathogenic bacterial strains (Mycobacterium tuberculosis, Staphylococcus aureus, Escherichia coli, Aconetobacter baumannii, and Klebsiella pneumoniae) in the lower micromolar range.

Formation mechanism of a novel core-shell with tetradecyl dimethyl benzyl ammonium-modified montmorillonite interlayer nanofibrous membrane and its antimicrobial properties.

A novel core-shell with a tetradecyl dimethyl benzyl ammonium chloride-modified montmorillonite (TDMBA/MMT) interlayer silk fibroin (SF)/poly(lactic acid) (PLLA) nanofibrous membrane was fabricated using a simple conventional electrospinning method. Scanning electron microscopy and pore size analyses revealed that this core-shell with TDMBA/MMT interlayer maintained its nanofibrous morphology and larger pore structure more successfully than SF/PLLA nanofibrous membranes after treatment with 75% ethanol vapor. Transmission electron microscopy and energy-dispersive X-ray spectroscopy analyses testified that the SF/PLLA-TDMBA/MMT nanofibers exhibited a core-shell with an interlayer structure, with SF/PLLA in the core-shell layer and TDMBA/MMT in the interlayer. The formation of a core-shell with interlayer nanofibers was primarily attributed to the uniform dispersion of TDMBA/MMT nanosheets in a solution owing to its exfoliation using hexafluoroisopropanol and then preparing a stable spinning solution similar to an emulsion. Compared to SF/PLLA nanofibrous membranes, the core-shell structure with TDMBA/MMT interlayers of SF/PLLA nanofibrous membranes exhibited enhanced hydrophilicity, thermal stability, mechanical properties as well as improved and long-lasting antimicrobial performance against Escherichia coli and Staphylococcus aureus without cytotoxicity.

Evaluation of inhalation risk during quarantine work with quaternary ammonium compounds-based disinfectant.

Quarantine work is widely recognized as an indispensable endeavor in curbing the propagation of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Furthermore, the heavy workload places workers at a heightened risk of chemical exposure and respiratory damage. Consequently, it is paramount to systematically perform health risk assessments and meticulously oversee the work by wearing personal protective equipment to minimize these risks. To assess the inhalation exposure, this study examined data on disinfectant exposure from quarantine professional users who utilized disinfectants containing quaternary ammonium compounds. Through a survey of 6,199 cases conducted by 300 quarantine professional users who actively engaged in quarantine work, we assembled a database of exposure factors derived from their utilization of spray-type disinfectants for quarantine purposes. Based on these data, we formulated an inhalation exposure algorithm, which considers the time-weighted average (TWA) air concentrations. The test results demonstrated that the industrial-grade respirator mask could prevent a minimum of 68.3 % of particles, reducing respiratory exposure. Consequently, the hazard quotient (HQ) due to disinfectant exposure also decreased. This research is essential in safeguarding the safety and health of professional users engaged in quarantine-related tasks. By implementing strict measures like health risk assessments and personal protective equipment, individuals with quarantine experience can safely carry out their quarantine work. The results of this study are expected to serve as a framework for improving policies and regulations concerning quarantine work and safeguarding the health of professional users.

PDADMAC/Alginate-Coated Gold Nanorod For Eradication of Staphylococcus Aureus Biofilms.

Introduction: Over 75% of clinical microbiological infections are caused by bacterial biofilms that grow on wounds or implantable medical devices. This work describes the development of a new poly(diallyldimethylammonium chloride) (PDADMAC)/alginate-coated gold nanorod (GNR/Alg/PDADMAC) that effectively disintegrates the biofilms of Staphylococcus aureus (S. aureus), a prominent pathogen responsible for hospital-acquired infections. Methods: GNR was synthesised via seed-mediated growth method, and the resulting nanoparticles were coated first with Alg and then PDADMAC. FTIR, zeta potential, transmission electron microscopy, and UV-Vis spectrophotometry analysis were performed to characterise the nanoparticles. The efficacy and speed of the non-coated GNR and GNR/Alg/PDADMAC in disintegrating S. aureus-preformed biofilms, as well as their in vitro biocompatibility (L929 murine fibroblast) were then studied. Results: The synthesised GNR/Alg/PDADMAC (mean length: 55.71 ± 1.15 nm, mean width: 23.70 ± 1.13 nm, aspect ratio: 2.35) was biocompatible and potent in eradicating preformed biofilms of methicillin-resistant (MRSA) and methicillin-susceptible S. aureus (MSSA) when compared to triclosan, an antiseptic used for disinfecting S. aureus colonisation on abiotic surfaces in the hospital. The minimum biofilm eradication concentrations of GNR/Alg/PDADMAC (MBEC50 for MRSA biofilm = 0.029 nM; MBEC50 for MSSA biofilm = 0.032 nM) were significantly lower than those of triclosan (MBEC50 for MRSA biofilm = 10,784 nM; MBEC50 for MRSA biofilm 5967 nM). Moreover, GNR/Alg/PDADMAC was effective in eradicating 50% of MRSA and MSSA biofilms within 17 min when used at a low concentration (0.15 nM), similar to triclosan at a much higher concentration (50 µM). Disintegration of MRSA and MSSA biofilms was confirmed by field emission scanning electron microscopy and confocal laser scanning microscopy. Conclusion: These findings support the potential application of GNR/Alg/PDADMAC as an alternative agent to conventional antiseptics and antibiotics for the eradication of medically important MRSA and MSSA biofilms.

Quaternary Ammonium Assisted Synthesis of Melanin-like Poly(l-DOPA) Nanoparticles with a Boosted Photothermal Effect.

Poly(levodopa) nanoparticles (P(l-DOPA) NPs) are another kind of melanin mimetic besides well-established polydopamine nanoparticles (PDA NPs). Due to the presence of carboxyl groups, the oxidative polymerization of l-DOPA to obtain particles was not as efficient as that of dopamine. Several established methods toward P(l-DOPA) NP fabrication do not combine convenience, morphological regularity, size controllability, low cost, and adaptability to metal-free application scenarios. In this work, P(l-DOPA) NPs were successfully prepared in hot water with the assistant of organic quaternary ammonium, due to the extra physical cross-linking mediated by cations. The employed physical interactions could also be affected by quaternary ammonium structure (i.e., number of cation heads, length of alkyl chain) to achieve different polymerization acceleration effects. The obtained P(l-DOPA) NPs retained superior photothermal properties and outperformed PDA-based melanin materials. Furthermore, P(l-DOPA) NPs were used in photothermal tumor therapy and showed better efficacy. This study offers new insights into the synthesis of melanin-like materials, as well as new understanding of the interaction between quaternary ammonium and bioinspired polyphenolic materials.

Regulating molecular brush structure on cotton textiles for efficient antibacterial properties.

The molecular brush structures have been developed on cotton textiles for long-term and efficient broad-spectrum antimicrobial performances through the cooperation of alkyl-chain and quaternary ammonium sites. Results show that efficient antibacterial performances can be achieved by the regulation of the alkyl chain length and quaternary ammonium sites. The antibacterial efficiency of the optimized molecular brush structure of [3-(N,N-Dimethylamino)propyl]trimethoxysilane with cetyl modification on cotton textiles (CT-DM-16) can reach more than 99 % against both E. coli and S. aureus. Alkyl-chain grafting displayed significantly improvement in the antibacterial activity against S. aureus with (N,N-Diethyl-3-aminopropyl)trimethoxysilane modification on cotton textiles (CT-DE) based materials. The positive N sites and alkyl chains played important roles in the antibacterial process. Proteomic analysis reveals that the contributions of cytoskeleton and membrane-enclosed lumen in differentially expressed proteins have been increased for the S. aureus antibacterial process, confirming the promoted puncture capacity with alkyl-chain grafting. Theoretical calculations indicate that the positive charge of N sites can be enhanced through alkyl-chain grafting, and the possible distortion of the brush structure in application can further increase the positive charge of N sites. Uncovering the regulation mechanism is considered to be important guidance to develop novel and practical antibacterial materials.

Recent Advances in the Synthesis of the Marine-Derived Alkaloid Fascaplysin and Its Metabolites Homofascaplysins A-C.

The fascaplysin and homofascaplysin class of marine natural products has a characteristic 12H-pyrido[1,2-a:3,4-b']diindole pentacyclic structure. Fascaplysin was isolated in 1988 from the marine sponge Fascaplysinopsis bergquist sp. The analogs of fascaplysin, such as homofascaplysins A, B, and C, were discovered late in the Fijian sponge F. reticulate, and also have potent antimicrobial activity and strong cytotoxicity against L-1210 mouse leukemia. In this review, the total synthesis of fascaplysin and its analogs, such as homofascaplysins A, B, and C, will be reviewed, which will offer useful information for medicinal chemistry researchers who are interested in the exploration of marine alkaloids.

Silver Diammine Fluoride Usage in General Dentistry Offices in Louisiana.

Purpose: To evaluate the current knowledge and usage of silver diammine fluoride (SDF) by general dentists in Louisiana and to identify primary barriers to the imple- mentation of SDF. Methods: A 16-item survey was emailed to 1719 Louisiana Dental Association members to identify factors influencing general dentists' usage of SDF. Results: Eighty-two surveys were completed with a response rate of 4.8 percent, with 69 identified as general dentists. Over half of the respondents were male (53.6%) and their practice experience ranged from less than one year to 48 years. The majority were solo owners (43.5%) while 7.3 percent had jobs in the corporate setting. Most agreed/strongly agreed that their knowledge of SDF was from either dental journals or online resources, while fewer stated they were taught about SDF (25%) or used SDF (8%) in dental school. The majority knew the advantages and off-label usage of SDF. However, only 40 percent recognized that SDF was officially approved for tooth hypersensitivity only. The most reported perceived barrier to SDF implementation was not learning about SDF in dental school (36%). Conclusion: There is a lack of understanding of SDF usage among Louisiana general dentists. The main reason for not incorporating SDF into their practice is the lack of training in their dental education.

A case of severe benzalkonium chloride intoxication in a cat.

BACKGROUND: Benzalkonium chloride (BAC) is a quaternary ammonium compound (QAC), that can be found in a wide variety of household products-from disinfectants to medicaments and home fragrances-but also professional products. In pets, cats have long been reported as more sensitive than dogs to QACs; in fact, signs of irritation such as oral ulcerations, stomatitis and pharyngitis can be observed after contact with concentrations of 2% or lower. In a review of 245 cases of BAC exposure in cats, reported by the Veterinary Poisons Information Service (United Kingdom) only 1.2% of the cases died or were euthanized. Nevertheless, BAC toxidromes in cats can result in transitory CNS and respiratory distress, as well as severe mucosal and cutaneous lesions. Currently, only a few reports are available concerning BAC poisoning in this species. CASE PRESENTATION: A 4 month-old kitten presented with severe glossitis, lameness in the hindlimbs and episodes of vomiting and diarrhoea. The cause was unknown until the owners reported use of a BAC-containing mould remover (5%) 4 days later. The patient developed severe oral burns requiring a pharyngeal tube for feeding and severe cutaneous chemical burns. The kitten was managed with supportive therapy and required hospitalization for 10 days. The symptoms disappeared completely 3 weeks after exposure. CONCLUSIONS: BAC is a very common compound contained in several household and professional products but, to the best of our knowledge, no previous case had been reported in Italy. We hope that this report will help raise awareness on the hazards of BAC products for cats in both domestic and work contexts.

Clinical effectiveness/child-patient and parent satisfaction of two topical fluoride treatments for caries: a randomised clinical trial.

Knowledge gaps exist regarding optimal silver diammine fluoride (SDF) regimens and the efficacy of new products for arresting dental caries in young children. We evaluated the effectiveness of 38%-SDF (SDI-RivaStar), Tiefenfluorid (TF) comparing with Placebo (P), all in conjunction with behavioural modification (BM), in preventing major complications (endodontic/extractions/pain)-a patient-centred outcome-due to early childhood caries over 12 months in children under 71-months. A six-arm, patient/parent-blinded, superiority, placebo-controlled randomised control trial at the university clinic in Riga, Latvia, from 1/9/20-31/8/22 (Protocol registration ISRCTN17005348). The trial tested six protocols, using three compounds (P/SDF/TF) under two regimes: annual and biannual (P1/P2/TF1/TF2/SDF1/SDF2) for major complications. Secondary outcomes included minor complications and parental satisfaction. All groups received BM. 373/427 randomised children (87.3%) completed the study. SDF2 had a significantly lower rate and risk of major (21.5%, OR = 0.28, 95%CI [0.11, 0.72], p < 0.05) and minor complications (OR = 0.16 (95%CI [0.05, 0.50], p = 0.002). Overall satisfaction was 96% (p > 0.05). SDF biannual application with BM effectively prevented major complications of early childhood caries and was well accepted by children and their parents. Trial registration number: ISRCTN17005348, principal investigator: Ilze Maldupa, registration date: 30/06/2021.Clinical trial registration number: ISRCTN registry: ISRCTN17005348, https://doi.org/10.1186/ISRCTN17005348 , registration date: 30/06/2021.

Neurotoxicity of tetramethylammonium ion on larval and juvenile zebrafish: Effects on neurobehaviors and multiple biomarkers.

Tetramethylammonium hydroxide (TMAH) is an important compound that utilized and released by the rapidly expanding semiconductor industry, which could hardly be removed by the conventional wastewater treatment techniques. As a cholinergic agonist, the tetramethylammonium ion (TMA+) has been reported to induce toxicity to muscular and respiratory systems of mammals and human, however the toxicity on aquatic biota remains poorly known. We investigated the neurotoxic effects of TMA+ exposure on zebrafish, based on neurobehavior tests and a series of biomarkers. Significant inhibitions on the swimming distance of zebrafish larvae were observed when the exposure level exceeded 50 mg/L, and significant alterations on swimming path angles (straight and deflective movements) occurred even at 10 mg/L. The tested neurobehavioral endpoints of zebrafish larvae were significantly positively correlated with reactive oxygen species (ROS) and malondialdehyde (MDA), significantly negatively related with the activities of antioxidant enzymes, but not significantly correlated with the level of acetylcholinesterase (AChE). Such relationship indicates that the observed neurotoxic effects on swimming behavior of zebrafish larvae is mainly driven by oxidative stress, rather than the alterations of neurotransmitter. At the highest exposure concentration (200 mg/L), TMA+ evoked more severe toxicity on zebrafish juveniles, showing significantly stronger elevation on the MDA activity, and greater inhibitions on the activities of antioxidant enzymes and AChE, suggesting juveniles were more susceptible to TMA+ exposure than larval zebrafish.

Elucidating Structural Configuration of Lipid Assemblies for mRNA Delivery Systems.

The development of mRNA delivery systems utilizing lipid-based assemblies holds immense potential for precise control of gene expression and targeted therapeutic interventions. Despite advancements in lipid-based gene delivery systems, a critical knowledge gap remains in understanding how the biophysical characteristics of lipid assemblies and mRNA complexes influence these systems. Herein, we investigate the biophysical properties of cationic liposomes and their role in shaping mRNA lipoplexes by comparing various fabrication methods. Notably, an innovative fabrication technique called the liposome under cryo-assembly (LUCA) cycle, involving a precisely controlled freeze-thaw-vortex process, produces distinctive onion-like concentric multilamellar structures in cationic DOTAP/DOPE liposomes, in contrast to a conventional extrusion method that yields unilamellar liposomes. The inclusion of short-chain DHPC lipids further modulates the structure of cationic liposomes, transforming them from multilamellar to unilamellar structures during the LUCA cycle. Furthermore, the biophysical and biological evaluations of mRNA lipoplexes unveil that the optimal N/P charge ratio in the lipoplex can vary depending on the structure of initial cationic liposomes. Cryo-EM structural analysis demonstrates that multilamellar cationic liposomes induce two distinct interlamellar spacings in cationic lipoplexes, emphasizing the significant impact of the liposome structures on the final structure of mRNA lipoplexes. Taken together, our results provide an intriguing insight into the relationship between lipid assembly structures and the biophysical characteristics of the resulting lipoplexes. These relationships may open the door for advancing lipid-based mRNA delivery systems through more streamlined manufacturing processes.

Quantification of quaternary ammonium compounds by liquid chromatography-mass spectrometry: Minimizing losses from the field to the laboratory.

Quaternary Ammonium Compounds (QACs) are widely used in household, medical and industrial settings. As a consequence, they are ubiquitously found in the environment. Although significant efforts have been put into the development of sensitive and reproducible analytical methods, much less effort has been dedicated to the monitoring of QACs upon sample storage and sample preparation. Here we studied the effect of storage, concentration, and extraction procedures on the concentrations of QACs in samples. Thirteen QACs selected amongst benzalkonium compounds (BACs), dialkyldimethylammonium compounds (DADMACs) and alkyltrimethylammonium compounds (ATMACs) were quantified in aqueous and solid samples using LC-MS/MS. Most QACs adsorbed on container walls could be recovered using a short washing step with MeOH containing 2 % v/v formic acid. Concentrations of QACs from aqueous solutions using solid phase extraction (SPE) with Strata-X cartridges and elution with acidified MeOH utilized to wash the emptied containers gave highly satisfactory recoveries (101-111 %). Good recoveries (89-116 %) were also obtained when extracting a spiked organic-rich synthetic soil using accelerated solvent extraction (ASE) with acidified MeOH at low solid/solvent ratio (0.4 g/20 mL). Applying the recommended methodologies to real samples collected from a Canadian wastewater treatment plant (WWTP) gave QAC concentrations in the ranges of 0.01-30 µg/L, < 1.2 µg/L, and 0.05-27 mg/kg for the influent, effluent and biosolids samples, respectively.

Synergistic antibacterial effect and mechanism between Cu2O nanoparticles and quaternary ammonium salt in moisture-curable acrylic coatings.

Combining with various antibacterial mechanisms is the preferred strategy to fabricate coatings with effective antibacterial performance. Herein, Cu2O nanoparticles and dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride, a kind of quaternary ammonium salt (QAS), were simultaneously incorporated into a moisture-curable acrylic resin in order to achieve both contact-killing and release-killing abilities for antibacterial coatings. The surface morphology, surface composition and basic properties of the coatings were thoroughly characterized. The antibacterial performance of the coatings was determined by in-vitro bacteriostatic test. Under the constant total mass fraction of antibacterial agents, both Cu2O and QAS content possessed the highest value on the coating surface at Cu2O/QAS mass ratio of 1:1, and correspondingly, the coatings reached sterilizing rate above 99 % against both E. coli and S. loihica, indicating the existence of synergistic effect between Cu2O and QAS. The synergistic antibacterial mechanism of the coatings involved two aspects. Firstly, the combination of contact-killing and release-killing biocides resulted in high bactericidal and antibiofilm activity against different bacteria. Further, the grafting of QAS molecules on the surface of Cu2O particles brought about the spontaneous migration of nanoparticles to the coating surface. The interaction between Cu2O and QAS also inhibited the phase separation of QAS and prolonged the release of Cu2+ at the same time. The coatings, therefore, exhibited stable antibacterial performance at varied service conditions.

The application of chitosan quaternary ammonium salt to replace polymeric aluminum ferric chloride for sewage sludge dewatering.

Inorganic coagulants such as poly aluminum ferric chloride (Al/Fe) are applied conventionally to sewage sludge dewatering and can be retained in the sludge cake, causing its conductivity to increase and generate secondary pollution. To reduce these disadvantages, there is a need to develop alternative, more sustainable chemicals as substitutes for conventional inorganic coagulants. In the present investigation, the application of a polymeric chitosan quaternary ammonium salt (CQAS) is explored as a complete, or partial, replacement for Al/Fe in the context of sludge dewatering processes. Laboratory experiments using digested sewage sludge showed that CQAS could effectively substitute for over 80 % of the Al/Fe inorganic coagulant in the sludge dewatering process. This substitution resulted in a reduction of sludge cake conductivity by more than 50 %. Simulation of sludge dewatering curves and imaging of the sludge surface indicated that the addition of CQAS led to an increase in nanosized pores, and a decrease in the specific resistance of the sludge filter cake as the dosage of Al/Fe decreased to around 30 %. The variations of fluorescence emission, quantum yield and carboxylic and amino groups, suggested that the chelating of Al/Fe decreased due to the bridging effects of CQAS. The CQAS had different flocculation bridging effects on various EPS fractions, which varied the amount of protein chelated with Al/Fe in each fraction. This study provides new information about the benefits of replacing conventional inorganic coagulants with natural organic polymers for sewage sludge dewatering, in terms of reduced sludge cake conductivity and greater dry solids content.

Membrane-Free Lateral Flow Assay with the Active Control of Fluid Transport for Ultrasensitive Cardiac Biomarker Detection.

Membrane-based lateral flow immunoassays (LFAs) have been employed as early point-of-care (POC) testing tools in clinical settings. However, the varying membrane properties, uncontrollable sample transport in LFAs, visual readout, and required large sample volumes have been major limiting factors in realizing needed sensitivity and desirable precise quantification. Addressing these challenges, we designed a membrane-free system in which the desirable three-dimensional (3D) structure of the detection zone is imitated and used a small pump for fluid flow and fluorescence as readout, all the while maintaining a one-step assay protocol. A hydrogel-like protein-polyelectrolyte complex (PPC) within a polyelectrolyte multilayer (PEM) was developed as the test line by complexing polystreptavidin (pSA) with poly(diallyldimethylammonium chloride) (PDDA), which in turn was layered with poly(acrylic acid) (PAA) resulting in a superior 3D streptavidin-rich test line. Since the remainder of the microchannel remains material-free, good flow control is achieved, and with the total volume of 20 µL, 7.5-fold smaller sample volumes can be used in comparison to conventional LFAs. High sensitivity with desirable reproducibility and a 20 min total assay time were achieved for the detection of NT-proBNP in plasma with a dynamic range of 60-9000 pg·mL-1 and a limit of detection of 56 pg·mL-1 using probe antibody-modified fluorescence nanoparticles. While instrument-free visual detection is no longer possible, the developed lateral flow channel platform has the potential to dramatically expand the LFA applicability, as it overcomes the limitations of membrane-based immunoassays, ultimately improving the accuracy and reducing the sample volume so that finger-prick analyses can easily be done in a one-step assay for analytes present at very low concentrations.

Polyvinyl alcohol/chitosan quaternary ammonium salt composite hydrogel with directional macroporous structure for photothermal synergistic antibacterial and wound healing promotion.

After skin tissue trauma, wound infections caused by bacteria posed a great threat to skin repair. However, resistance to antibiotics, the current treatment of choice for bacterial infections, greatly affected the efficiency of anti-infection and wound healing. Therefore, there has been a critical need for the development of novel antimicrobial materials and advanced therapeutic methods to aid in skin repair. In this paper, rGO-PDA@ZIF-8 nanofillers were prepared by coating graphene oxide (GO) with dopamine (DA), followed by in situ growth of zeolite imidazolate framework-8 (ZIF-8). Using polyvinyl alcohol (PVA) and chitosan quaternary ammonium salt (CS) as matrix materials, along with polyethylene glycol (PEG) as a pore-forming agent, and rGO-PDA@ZIF-8 as an antimicrobial nano-filler, we successfully prepared rGO-PDA@ZIF-8/PVA/CS composite hydrogels with a directional macroporous structure using bidirectional freezing method and phase separation technique. This hydrogel exhibited excellent mechanical properties, good solubility and water retention capabilities. In addition, the hydrogel demonstrated excellent biocompatibility. Most notably, it not only exhibited excellent bactericidal effect against E. coli and S. aureus (99.1 % and 99.0 %, respectively) under the synergistic effect of intrinsic antibacterial activity and photothermal antibacterial, but also exhibited the ability to promote wound healing, making it a promising candidate for wound healing applications.

Aqueous biphasic systems developed with deep eutectic solvents and polymer for the efficient extraction of pigments from beverages.

Novel aqueous biphasic systems (ABSs) developed with benzyl-based quaternary ammonium salts-deep eutectic solvents (DESs) and polypropylene glycol (PPG) were herein proposed. The liquid-liquid equilibrium and the partitioning behavior of pigments in the systems were addressed. The results suggested that the shorter the carbon chain length of the DES, the easier to form two phases. The analysis of mixed samples showed that the selective separation was achieved in the ABSs, including 99.47% of tartrazine in the DES-rich phase and 98.47% of sudan III in the PPG-rich phase. Additionally, the systems were successfully applied to the extraction of pigments from the actual beverage samples with recoveries ranging from 93.43% to 102.15%. Furthermore, the study on the separation mechanism indicated that the hydrogen bonding played a significant role in the separation process. All the above results highlight the proposed DES/polymer-based ABSs have great advantages in selective and high-performance separation of pigments from beverages.