Biodegradation of carbon disulfide and hydrogen sulfide using a moving bed biofilm reactor coupled with sulfur recycling: Performance, mechanism, and potential application.

In this work, a moving bed biofilm reactor (MBBR) was equipped for simultaneous biodegradation of CS2 and H2S. MBBR was started up and operated with different inlet concentrations and retention time; results indicated that approximately 81.9% CS2 and 93.9% H2S could be degraded, and the maximum elimination capacities of 209.3 g/(m3·h) and 138.5 g/(m3·h) were achieved for CS2 and H2S, respectively. The biodegradation mechanisms, including mass transfer, kinetics, and electron transfer, were then investigated. The mass transfer fraction and the maximum degradation rate per unit filter volume were calculated for evaluating the characteristics of mass transfer in MBBR. The variations of extracellular polymeric substances secretion, electron transport system activity and ATP enzyme activity showed that MBBR had an excellent performance for waste gas purification. Subsequently, the recovery of sulfur was explored via morphology, crystal structure, and generation kinetics, indicating that a modified Gompertz model could precisely describe the kinetics of sulfur recovery, and the product selectivity of 51.7% was achieved for sulfur. The microbial community analysis suggested that the dominant genera for biodegradation and sulfur recovery were Acidithiobacillus and Mycobacterium. Finally, MBBR system was validated for treatment of actual waste gas; results indicated that maximum elimination capacities of 134.1 g/(m3·h) and 117.1 g/(m3·h) were obtained for CS2 and H2S, respectively, suggesting that MBBR had the potential for application.

Mitochondrial transfer of α-synuclein mediates carbon disulfide-induced mitochondrial dysfunction and neurotoxicity.

Exposure to carbon disulfide (CS2) is a recognized risk factor in the pathogenesis of Parkinson's disease, yet the underlying mechanisms of deleterious effects on mitochondrial integrity have remained elusive. Here, through establishing CS2 exposure models in rat and SH-SY5Y cells, we demonstrated that highly expressed α-synuclein (α-Syn) is transferred to mitochondria via membrane proteins such as Tom20 and leads to mitochondrial dysfunction and mitochondrial oxidative stress, which ultimately causes neuronal injury. We first found significant mitochondrial damage and oxidative stress in CS2-exposed rat midbrain and SH-SY5Y cells and showed that mitochondrial oxidative stress was the main factor of mitochondrial damage by Mitoquinone intervention. Further experiments revealed that CS2 exposure led to the accumulation of α-Syn in mitochondria and that α-Syn co-immunoprecipitated with mitochondrial membrane proteins. Finally, the use of an α-Syn inhibitor (ELN484228) and small interfering RNA (siRNA) effectively mitigated the accumulation of α-Syn in neurons, as well as the inhibition of mitochondrial membrane potential, caused by CS2 exposure. In conclusion, our study identifies the translocation of α-Syn to mitochondria and the impairment of mitochondrial function, which has important implications for the broader understanding and treatment of neurodegenerative diseases associated with environmental toxins.

Bioorthogonal Delivery of Carbon Disulfide in Living Cells.

Carbon disulfide (CS2) is an environmental contaminant, which is deadly hazardous to the workers under chronic or acute exposure. However, the toxicity mechanisms of CS2 are still unclear due to the scarcity of biocompatible donors, which can release CS2 in cells. Here we developed the first bioorthogonal CS2 delivery system based on the "click-and-release" reactions between mesoionic 1,3-thiazolium-5-thiolates (TATs) and strained cyclooctyne exo-BCN-OH. We successfully realized intracellular CS2 release and investigated the causes of CS2-induced hepatotoxicity, including oxidative stress, proteotoxic stress and copper-dependent cell death. It is found that CS2 can be copper vehicles bypassing copper transporters after reacting with nucleophiles in cytoplasm, and extra copper supplementation will exacerbate the loss of homeostasis of cells and ultimately cell death. These findings inspired us to explore the anticancer activity of CS2 in combination with copper by introducing a copper chelating group in our CS2 delivery system.

Multi-omics analysis of nitrifying sludge under carbon disulfide stress: Nitrification performance and molecular mechanisms.

Carbon disulfide (CS2) is a widely used enzyme inhibitor with cytotoxic properties, commonly employed in viscose fibers and cellophane production due to its non-polar characteristics. In industry, CS2 is often removed by aeration, however, residual CS2 may enter the wastewater treatment plants, impacting the performance of nitrifying sludge. Currently, there is a notable dearth of research on the response of nitrifying sludge to CS2-induced stress. This study delves into the alterations in the performance of nitrifying sludge under short-term and long-term CS2 stress, scrutinizes the toxic effects of CS2 on microbial cells, elucidates the succession of microbial community structure, and delineates changes in microbial metabolic products. The findings from short-term CS2 stress revealed that low concentrations of CS2 induced oxidative stress damage, which was subsequently repaired in cells. However, at concentrations of 100-200 mg/L, CS2 inhibited reactive oxygen species, superoxide dismutase, and catalase, which are associated with metabolic and antioxidant activities. The inhibition of nitrite oxidoreductase activity by high concentrations of CS2 was attributed to its impact on the enzyme's conformation. Prolonged CS2 stress resulted in an increase in the secretion of soluble extracellular polymeric substances in sludge, while CS2 was assimilated into sulfate. The analysis of sludge microbial community structure revealed a decline in the relative abundance of Rhodanobacter, which is associated with nitrification, and an increase in Sinomonas, involved in sulfur oxidation. Metabolite analysis results demonstrated that high concentrations of CS2 affect pantothenate and CoA biosynthesis, purine metabolism, and glutathione metabolism. This study elucidated the microbial response mechanism of nitrifying sludge under short-term and long-term CS2 stress. It also clarified the composition and function of microbial ecosystems, and identified key bacterial species and metabolites. It provides a basis for future research to reduce CS2 inhibition through approaches such as the addition of metal ions, the selection of efficient CS2-degrading strains, and the modification of strain metabolic pathways.

Maternal residential exposure to solvents from industrial sources during pregnancy and childhood cancer risk in California.

BACKGROUND: Maternal solvent exposure has been suspected to increase offspring cancer risk. The study aimed to evaluate the associations between maternal residential exposure to solvents from industrial pollution during pregnancy and childhood cancer. METHODS: The present study included 15,744 cancer cases (aged 0-19 years at diagnosis) identified from California Cancer Registry and 283,141 controls randomly selected from California Birth Registry (20:1 frequency-matched by birth year: 1998-2016). We examined industrial releases of tetrachloroethylene and 1,1,1-trichloroethane within 3 km of the birth address, while we used a 5 km buffer for carbon disulfide. We calculated the total exposure from all linked Toxic Release Inventory sites during each index pregnancy and assigned "ever/never" and "high/low exposed/unexposed" exposure, using median values. We performed quadratic decay models to estimate cancer risks associated with maternal solvent exposure in pregnancy. RESULTS: 1,1,1-Trichloroethane was associated with rhabdomyosarcoma (adjusted Odds Ratio (aOR): 1.96; 95% Confidence Interval (CI): 1.16, 3.32) in the "ever exposed" group. Ever exposure to carbon disulfide was associated with increased risks of medulloblastoma (OR = 1.85, 95% CI 1.01, 3.40) and ependymoma (OR = 1.63, 95% CI 0.97, 2.74). CONCLUSIONS: Overall, our findings suggested maternal residential exposure to solvents from industrial sources might be associated with elevated childhood cancer risks.

Carbon disulfide induces accumulation of TDP-43 in the cytoplasm and mitochondrial dysfunction in rat spinal cords.

The relationship between environmental neurotoxicant exposure and neurodegenerative diseases is being extensively investigated. Carbon disulfide, a classic neurotoxicant and prototype of dithiocarbamates fungicides and anti-inflammatory agents, has been detected in urban adults, raising questions about whether exposure to carbon disulfide is associated with a high incidence of neurodegenerative diseases. Here, using rat models and SH-SY5Y cells, we investigated the possible mechanistic linkages between carbon disulfide neurotoxicity and the expression of TDP-43 protein, a marker of amyotrophic lateral sclerosis/frontotemporal lobar degeneration. Our results showed that rats exhibited severe dyskinesia and increased TDP-43 expression in the spinal cord following carbon disulfide exposure. Moreover, carbon disulfide exposure induced abnormal cytoplasmic localization and phosphorylation of TDP-43 in motor neurons. Importantly, carbon disulfide treatment led to the accumulation of TDP-43 in the mitochondria of motor neurons and resulted in subsequent mitochondrial damage, including mitochondrial structural disruption, mitochondrial respiratory chain complex I inhibition, and impaired VCP/p97-dependent mitophagy. In summary, our study provides support for carbon disulfide exposure-mediated TDP-43 mislocalization and mitochondrial dysfunction, contributes to understanding the pathogenesis of environmental neurotoxin-induced neurodegeneration, and provides inspiration for potential therapeutic strategies.

Carbon disulfide removal from gasoline fraction using zinc-carbon composite synthesized using microwave-assisted homogenous precipitation.

Carbon disulfide (CS2) is one of the sulfur components that are naturally present in petroleum fractions. Its presence causes corrosion issues in the fuel facilities and deactivates the catalysts in the petrochemical processes. It is a hazardous component that negatively impacts the environment and public health due to its toxicity. This study used zinc-carbon (ZC) composite as a CS2 adsorbent from the gasoline fraction model component. The carbon is derived from date stone biomass. The ZC composite was prepared via a homogenous precipitation process by urea hydrolysis. The physicochemical properties of the prepared adsorbent are characterized using different techniques. The results confirm the loading of zinc oxide/hydroxide carbonate and urea-derived species on the carbon surface. The results were compared by the parent samples, raw carbon, and zinc hydroxide prepared by conventional and homogeneous precipitation. The CS2 adsorption process was performed using a batch system at atmospheric pressure. The effects of adsorbent dosage and adsorption temperatures have been examined. The results indicate that ZC has the highest CS2 adsorption capacity (124.3 mg.g-1 at 30 °C) compared to the parent adsorbents and the previously reported data. The kinetics and thermodynamic calculation results indicate the spontaneity and feasibility of the CS2 adsorption process.

Carbon disulfide exposure induced lung function reduction partly through oxidative protein damage: A cross-sectional and longitudinal analysis.

Carbon disulfide (CS2) exposure has been associated with lung function reduction in occupational population. However, evidence on the general population with relatively low CS2 exposure is lacking and the mechanism involved remains largely unknown. Urinary CS2 metabolite (2-mercaptothiazolidine-4-carboxylic acid, TTCA) and lung function were determined in the urban adults from the Wuhan-Zhuhai cohort at baseline in 2011-2012 and were repeated every 3 years. Cross-sectional and longitudinal associations between TTCA and lung function were estimated using linear mixed models. Inflammation and oxidative damage biomarkers in blood/urine were measured to evaluate their potential mediating roles involved. Cross-sectionally, participants in the highest quartile of TTCA level showed a 0.64% reduction in FEV1/FVC and a -308.22 mL/s reduction in PEF, compared to those in the lowest quartile. Longitudinally, participants with consistently high TTCA level had annually -90.27 mL/s decline in PEF, compared to those with consistently low TTCA level. Mediation analysis revealed that plasma protein carbonyl mediated 49.89% and 22.10% of TTCA-associated FEV1/FVC and PEF reductions, respectively. Conclusively, there was a cross-sectional and longitudinal association between CS2 exposure and lung function reduction in the general urban adults, and protein carbonylation (oxidative protein damage) partly mediated lung function reduction from CS2 exposure.

DNA Damage on Buccal Epithelial Cells, Personal Working in the Rubber Industry Occupationally Exposed to Carbon Disulfide (CS2).

INTRODUCTION: The most significant industrial utilization of carbon disulfide (CS2) has been in the manufacture of cellulose rayon, cellophane, and rubber industry. CS2 prompts expanded recurrence of chromosomal variations in laborers occupationally exposed to CS2. MATERIALS AND METHODS: In the current study, the DNA analysis was carried out from exfoliated buccal epithelial cells from rubber industry workers exposed to CS2 and an equal number of healthy control subjects. Both the control and experimental subjects were categorized by their smoking habits such as smokers (S) and non-smokers (NS). Furthermore, experimental subjects were further separated based on their exposure period. Students t-test statistical tools were used to analyze the final results. RESULTS: The present analysis identified a high frequency of DNA damage in rubber industry workers (16.55±0.43) than control subjects (9.8±0.21). Also, maximum number of DNA damage detected in smoking experimental group (18.27±0.02) than non-smoking experimental (15.02±0.01) and smoking control groups (10.25±0.04 ). CONCLUSION: Smoking habits synergistically increased the DNA damage in the rubber industry workers exposed to CS2.

NaH-promoted one-pot synthesis of 5-amidoimidazoles from arylamines, carbon disulfide and isocyanides.

A novel, convenient and efficient protocol to access functionalized 5-amidoimidazoles is developed via one-pot synthesis from readily available materials of arylamines, carbon disulfide and isocyanides. The transformation was realized at room temperature and provided 5-amidoimidazoles in moderate to good yields in the presence of NaH. In addition, control experiments indicated that the process might be achieved via the base-induced cyclization of activated methylene isocyanides with N,N-disubstituted thioureas that produced from the reaction of amines and carbon disulfide.

Concerted and sequential three-body fragmentation of deep-core-ionized carbon disulfide.

Momentum vector correlation is a powerful tool to study molecular dissociation. We have studied the three-body fragmentation of carbon disulfide after sulfur 1s photoionization by means of momentum imaging techniques. Concerted and sequential pathways are disentangled in three-body fragmentation using adapted analysis strategies. In particular, we introduce various data visualization schemes that are proved to be particularly efficient to determine dissociation dynamics.

[Characterization of VOCs Emissions from Caged Broiler House in Winter].

Volatile organic compound (VOCs) emissions from poultry and livestock facilities affect the surrounding environmental quality and human health. However, VOCs emissions from broiler houses have been less characterized, and studies of related dominant odorants, carcinogenic risk, and ozone formation potential are still lacking. To fill this research gap, VOCs pollutants emitted from a broiler house were investigated in this study. The VOCs emission characteristics of the broiler house during three different periods of broiler growth (early, middle, and later) were analyzed using gas chromatography-mass spectrometry. The results showed that 77 types of VOCs were detected, including 16 types of halogenated hydrocarbons, 21 types of alkanes, 5 types of olefins, 12 types of aromatic hydrocarbons, 15 types of oxygenated volatile organic compounds (OVOCs), and 8 types of sulfides. During the entire 42-day growth period, the concentrations of halogenated hydrocarbons, alkanes, olefin, aromatic hydrocarbons, and OVOCs in the broiler house showed few changes. However, with the growth of broilers, the intake of sulfur-containing amino acids and the fecal emission coefficient increased, resulting in the gradual conversion of the VOCs to sulfide. Therefore, emissions of sulfur-containing VOCs increased in the early and middle growth periods. Moreover, the increase in ventilation in the house during the later growth period resulted in a decrease in the sulfur-containing VOCs concentrations. The dominant odorants in the broiler house were naphthalene, ethyl acetate, acetaldehyde, carbon disulfide, dimethyl disulfide, methanethiol, methanethiol, and thiophene. Methanethiol had the highest odorous values, ranging from 2172.4 to 19090.9. Meanwhile, there were acceptable levels of carcinogenic risk in the early and middle growth periods, with a lifetime cancer risk (LCR) of 7.7×10-6 and 4.5×10-6, respectively. The average ozone formation potential (OFP) was (1458.9±787.4) µg·m-3. The results of this study can provide a scientific basis for the monitoring of malodorous substances and formulation of emission reduction strategies in broiler production.

Emission of volatile sulphur compounds during swine manure composting: Source identification, odour mitigation and assessment.

This study aimed to identify the sources of volatile sulphur compounds (VSCs) and evaluate their mitigation by ferric oxide (Fe2O3) during swine manure composting. Four chemicals, including l-cysteine, l-methionine, sodium sulphite, and sodium sulphate, were further added to simulate organic and inorganic sulphur-containing substances in swine manure to track VSC sources during composting. Results show that sulphur simulants induced the emission of six common VSCs, including methyl sulphide (Me2S), dimethyl sulphide (Me2SS), carbonyl sulphide (COS), carbon disulphide (CS2), methyl mercaptan (MeSH), and ethyl mercaptan (EtSH), during swine manure composting. Of them, COS, CS2, MeSH and Me2SS were predominantly contributed by the biodegradation of methionine and cysteine, while Me2S and EtSH were dominated by the reduction of sulphite and sulphate. Further Fe2O3 addition at 1.5 % of total wet weight of composting materials immobilized elemental sulphur and inhibited sulphate reduction to reduce the emission of VSCs by 46.7-80.9 %. Furthermore, odour assessment indicated that adding Fe2O3 into composting piles significantly reduced the odour intensity level to below 4, the odour value of VSCs by 47.1-81.3 %, and thus the non-carcinogenic risk by 68.4 %.

Synthesis and Biological Importance of 2-(thio)ureabenzothiazoles.

The (thio)urea and benzothiazole (BT) derivatives have been shown to have a broad spectrum of biological activities. These groups, when bonded, result in the 2-(thio)ureabenzothizoles (TBT and UBT), which could favor the physicochemical and biological properties. UBTs and TBTs are compounds of great importance in medicinal chemistry. For instance, Frentizole is a UBT derivative used for the treatment of rheumatoid arthritis and systemic lupus erythematosus. The UBTs Bentaluron and Bethabenthiazuron are commercial fungicides used as wood preservatives and herbicides in winter corn crops. On these bases, we prepared this bibliography review, which covers chemical aspects of UBTs and TBTs as potential therapeutic agents as well as their studies on the mechanisms of a variety of pharmacological activities. This work covers synthetic methodologies from 1935 to nowadays, highlighting the most recent approaches to afford UBTs and TBTs with a variety of substituents as illustrated in 42 schemes and 13 figures and concluded with 187 references. In addition, this interesting review is designed on chemical reactions of 2-aminobenzothiazoles (2ABTs) with (thio)phosgenes, iso(thio)cyanates, 1,1'-(thio)carbonyldiimidazoles [(T)CDI]s, (thio)carbamoyl chlorides, and carbon disulfide. This topic will provide information of utility for medicinal chemists dedicated to the design and synthesis of this class of compounds to be tested with respect to their biological activities and be proposed as new pharmacophores.

Synthesis of functionalized S-benzyl dithiocarbamates from diazo-compounds via multi-component reactions with carbon disulfide and secondary amines.

Triflic acid promoted multi-component synthesis of functionalized S-benzyl dithiocarbamates from diazo compounds, carbon disulfide and secondary amines is reported. The reactions proceeded at room temperature and gave the desired dithiocarbamates in good yields. Wide-substrate scope and easy operation are the important features of this methodology.

Occupational risk factors for hypertension.

The identification and characterization of the modifiable risk factors of hypertension is of great value for public health and clinical medicine to achieve primary prevention. A large amount of literature on the effects of occupational factors on blood pressure and hypertension has been published. In this review, I summarize current evidence regarding the role of occupational factors in hypertension. The results of this review suggest that there is sufficient evidence to support the association between increased risk of hypertension and job stress, shift work, occupational lead exposure, and noise exposure. The association of hypertension with physical inactivity, sedentary behavior, and occupational exposure to mercury, arsenic, cadmium, or carbon disulfide remains inconclusive, although several studies have reported this finding. This review will serve as a step toward future research and provide baseline information for developing strategic interventions to prevent hypertension in the working population.

Chromatographic analysis of dithiocarbamate residues and their metabolites in foods employed in dietary exposure studies-a review.

Dithiocarbamates (DTCs) belong to a group of compounds used as fungicides in food production and can be divided into three major groups. Since DTCs easily oxidise and hydrolyse in alkaline and acidic medium respectively, precautions have to be implemented during preparation/homogenisation and extraction of samples. As such, test samples are commonly prepared individually by cutting into small pieces just before the digestion of DTCs with a hot acid to give carbon disulphide (CS2) and the results are expressed as CS2 without any differentiation of individual DTCs. However, individual DTCs have different toxicological potencies whilst their metabolites are more toxic than the parent compound. Apart from the hot digestion method, chromatographic separation of three major groups of DTCs has been developed by a number of different researchers. This review provides a comprehensive examination of sample preparation, extraction, clean-up and chromatographic methods for the determination of individual DTCs and their more toxic metabolites in foodstuffs. Moreover, this review also studies on how dietary exposure of DTCs can be efficiently and effectively estimated using different methods of analysis.

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide.

Soluble sulfur (S8) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS2) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS2) and S8, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS2 solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.

False positive effect of sulfur sources used in growing and processing of vine (Vitis Vinifera L.) leaves on the results of dithiocarbamate analysis based on carbon disulfide measurement.

Vine leaves, which are produced fresh, brined or fermented from the leaves of Vitis Vinifera in Türkiye are an important food. Sulfur is used as a pesticide and sulfur compounds can be used as additives during the growing and processing of the vine leaves. These sulfur sources cause positive results on carbon disulfide (CS2) measurements by GC-MS. Therefore, the main objective of the present study was to investigate the effects of residues of sulfur or sulfur compounds on dithiocarbamate analysis methods based on CS2 measurement. For this, vine leaves were produced by controlled agricultural production and processed as brine under controlled conditions. The sulfur dioxide (SO2) and dithiocarbamate analysis were carried out on the vine leave obtained by applying sulfur spraying in agricultural treatments and brined vine leaves produced by adding sodium metabisulfite (SM), and control samples of each stage. SO2 was not detected in any of the samples in this study. SO2 residues did not occur in the vine leaves as a result of the sulfur spraying application and therefore did not have a false positive effect on dithiocarbamate analysis. However, approximately 0.15 mg kg-1 false positive dithiocarbamate was detected, which is thought to originate from natural sulfur in the vine leaves. The effect of SM, which was used in low concentration in the production of brined vine leaves, on dithiocarbamate results was limited. Even if SM was not used, the total false positive dithiocarbamate result in the brined vine leaves production process was approximately determined as 0.20 mg kg-1. This study showed that the dithiocarbamates analysis method based on CS2 measurement may lead to false positive results in brined vine leaves since sulfur compounds are found naturally in vine leaves.

[Study on determination of 2-thioxothiazolidine-4-carboxylic Acid in urine by high performance liquid chromatography].

Objective: To establish a high performance liquid chromatography method for the determination of 2-thioxothiazolidine-4-carboxylic acid (TTCA) in urine. Methods: After acidification with hydrochloric acid, TTCA in urine was first extracted by ethyl acetate with excessive sodium chloride, then gradient separated by a symmetry C18 column and then detected by a diode array detector. The quantification was based on a working curve of external standard method. Results: The linear relationship of TTCA in urine was good in the range of 0.03-10.00 mg/L, and the correlation coefficient was 0.9999. The detection limit and minimum quantitative concentration of TTCA in urine were 0.008 mg/L and 0.027 mg/L. The intra-assay precision of the method was 0.9%-1.4%, the inter-assay precision was 1.3%-3.5%, and the average recovery was 85.0%-92.7% while the concentrations of TTCA in urine was 0.8, 2.0 and 8.0 mg/L, respectively (n=6) . Conclusion: The gradient elution high performance liquid chromatography method has simple operation and high sensitivity, and it is suitable for the determination of TTCA on a low level in urine for occupational workers exposure to carbon disulfide.