Efectividad del ultrasonido pulsado de baja intensidad en pacientes tras osteotomía: una revisión sistemática / Effectiveness of low-intensity pulsed ultrasound in patients after osteotomy: A systematic review

La utilización de la terapia de ultrasonidos pulsados de baja intensidad para la cicatrización ósea y el tratamiento de fracturas es considerada cada vez más como una alternativa terapéutica de coste económico moderado y con efectos adversos nulos o mínimos (p. ej. leve reacción al gel conductor).Con todo, existe cierta controversia con relación a su evidencia científica. La presente revisión busca arrojar algo de luz sobre esta controversia y cubrir un espacio de estudio no ocupado por trabajos previos ni actuales sobre la terapia mediante ultrasonidos. Es necesario conocer el impacto real del tratamiento con ultrasonidos pulsados de baja intensidad en pacientes sometidos a osteotomía, así como su aplicabilidad como protocolo poscirugía para mejorar los procesos de recuperación, rehabilitación y, con ello, disminuir los tiempos de incapacidad. (AU)

The use of low intensity pulsed ultrasound (LIPUS) therapy for bone healing and fracture treatment is increasingly considered as a therapeutic alternative with moderate economic cost and none or minimal adverse effects (e.g., low reaction to the conductive gel).However, there is some controversy regarding its scientific evidence. The present review seeks to shed some light on this controversy and to cover an area of study not occupied by previous or current work on ultrasound therapy. It is necessary to know the real impact of the treatment with low intensity pulsed ultrasound in patients with osteotomy, as well as its applicability as a post-surgery protocol to improve the recovery and rehabilitation processes and, at the end of the day, to reduce the time of disability. (AU)

Biomechanical analysis of plate versus K-wire fixation for metacarpal shaft fractures with wedge-shaped bone defects.

BACKGROUND: Metacarpal shaft fracture is a common type of hand fracture. Numerous studies have explored fixing transverse fractures in the midshaft of the metacarpal bone. However, this section of the metacarpal bone is often susceptible to high-energy injury, resulting in comminuted fracture or bone loss. In such cases, wedge-shaped bone defects can develop in the metacarpal shaft, increasing the difficulty of performing fracture fixation. Notably, the research on this type of fracture fixation is limited. This study compared the abilities of four fixation methods to fix metacarpal shaft fractures with wedge-shaped bone defects. METHODS: In total, 28 artificial metacarpal bones were used. To create wedge-shaped bone defects, an electric saw was used to create metacarpal shaft fractures at the midshaft of each bone. The artificial metacarpal bones were then divided into four groups for fixation. The bones in the first group were fixed with a dorsal locked plate (DP group), those in the second group were fixed with a volar locked plate (VP group), and those in the third group were fixed by combining dorsal and volar locked plates (DP + VP group), and those in the fourth group were fixed with two K-wires (2 K group). Cantilever bending tests were conducted using a material testing machine to measure yielding force and stiffness. The four groups' fixation capabilities were then assessed through analysis of variance and Tukey's test. RESULTS: The DP + VP group (164.1±44.0 N) achieved a significantly higher yielding force relative to the 2 K group (50.7 ± 8.9 N); the DP group (13.6 ± 3.0 N) and VP group (12.3 ± 1.0 N) did not differ significantly in terms of yielding force, with both achieving lower yielding forces relative to the DP + VP group and 2 K group. The DP + VP group (19.8±6.3 N/mm) achieved the highest level of stiffness, and the other three groups did not differ significantly in terms of stiffness (2 K group, 5.4 ± 1.1 N/mm; DP group, 4.0 ± 0.9 N/mm; VP group, 3.9 ± 1.9 N/mm). CONCLUSIONS: The fixation method involving the combined use of dorsal and volar locked plates (DP + VP group) resulted in optimal outcomes with respect to fixing metacarpal shaft fractures with volar wedge bone defects.

On the Ion Implantation Synthesis of Ag-Embedded Over Sr-Substituted Hydroxyapatite on a Nano-Topography Patterned Ti for Application in Acetabular Fracture Sites.

Introduction: There is an ongoing need for improved healing response and expedited osseointegration on the Ti implants in acetabular fracture sites. To achieve adequate bonding and mechanical stability between the implant surface and the acetabular fracture, a new coating technology must be developed to promote bone integration and prevent bacterial growth. Methods: A cylindrical Ti substrate mounted on a rotating specimen holder was used to implant Ca2+, P2+, and Sr2+ ions at energies of 100 KeV, 75 KeV and 180 KeV, respectively, using a low-energy accelerator to synthesize strontium-substituted hydroxyapatite at varying conditions. Ag2+ ions of energy 100 KeV were subsequently implanted on the as-formed surface at the near-surface region to provide anti-bacterial properties to the as-formed specimen. Results: The properties of the as-formed ion-implanted specimen were compared with the SrHA-Ag synthesized specimens by cathodic deposition and low-temperature high-speed collision technique. The adhesion strength of the ion-implanted specimen was 43 ± 2.3 MPa, which is well above the ASTM standard for Ca-P coating on Ti. Live/dead cell analysis showed higher osteoblast activity on the ion-implanted specimen than the other two. Ag in the SrHA implanted Ti by ion implantation process showed superior antibacterial activity. Discussion: In the ion implantation technique, nano-topography patterned surfaces are not concealed after implantation, and their efficacy in interacting with the osteoblasts is retained. Although all three studies examined the antibacterial effects of Ag2+ ions and the ability to promote bone tissue formation by MC3T3-E1 cells on SrHA-Ag/Ti surfaces, ion implantation techniques demonstrated superior ability. The synthesized specimen can be used as an effective implant in acetabular fracture sites based on their mechanical and biological properties.

Deep-learning-based pelvic automatic segmentation in pelvic fractures.

With the recent increase in traffic accidents, pelvic fractures are increasing, second only to skull fractures, in terms of mortality and risk of complications. Research is actively being conducted on the treatment of intra-abdominal bleeding, the primary cause of death related to pelvic fractures. Considerable preliminary research has also been performed on segmenting tumors and organs. However, studies on clinically useful algorithms for bone and pelvic segmentation, based on developed models, are limited. In this study, we explored the potential of deep-learning models presented in previous studies to accurately segment pelvic regions in X-ray images. Data were collected from X-ray images of 940 patients aged 18 or older at Gachon University Gil Hospital from January 2015 to December 2022. To segment the pelvis, Attention U-Net, Swin U-Net, and U-Net were trained, thereby comparing and analyzing the results using five-fold cross-validation. The Swin U-Net model displayed relatively high performance compared to Attention U-Net and U-Net models, achieving an average sensitivity, specificity, accuracy, and dice similarity coefficient of 96.77%, of 98.50%, 98.03%, and 96.32%, respectively.

A Retrospective Study of the Presentation, Diagnosis, Management, and Outcomes of 27 Patients with Osteogenesis Imperfecta at a Single Center in Türkiye.

BACKGROUND This retrospective study aimed to evaluate the presentation, diagnosis, management, and outcomes of 27 patients diagnosed with osteogenesis imperfecta at a single center in Türkiye between January 2011 and January 2020. MATERIAL AND METHODS We analyzed data from the medical records of 27 patients with osteogenesis imperfecta admitted to Çukurova University Faculty of Medicine, Department of Orthopedics and Traumatology, between January 2011 and January 2020. The data included the clinical examination notes of the cases classified according to the Sillence and Shapiro systems, age, sex, parental consanguinity, genetic analysis (DNA isolation) results, the number and localization of past fractures, treatment methods, complications, hypermobility, and ambulation scoring. RESULTS The mean age of the patients (n=13 male, n=14 female) was 10.4±7.4 years, ranging from 3 to 39 years. Almost half (n=15, 55.6%) had consanguineous parents. The patients had 131 fractures during the 9 years between January 2011 and January 2020, with the femur being the most commonly fractured bone; 13 patients (48.15%) received surgical and conservative treatments, while the remaining 14 underwent only conservative treatments. The results revealed a strong association between the number of fractures and the types of genetic mutations (P=0.004). CONCLUSIONS Study findings indicate that the type of genetic mutation was not significantly correlated with the risk of treatment complications in osteogenesis imperfecta cases. Nevertheless, the study reveals a noteworthy association between the type of mutation and the number of surgeries required. Specifically, patients with the COL1A1 mutation needed more surgeries.

[Navicular bone fractures in horses: Prognosis after conservative and surgical treatment]. / Strahlbein-Frakturen beim Pferd: Prognose nach konservativer und chirurgischer Therapie.

INTRODUCTION: The aim of this retrospective study is to describe and compare conservative and surgical treatment of navicular fractures in horses. An attempt is made to identify critical points that can favorably influence the prognosis of this orthopedic disease. All horses treated for a navicular fracture at the Equine Clinic, Vetsuisse Faculty, University of Zurich between 2005 and 2017 were included in this study. The severity of lameness at initial examination, radiographic assessment, hoof conformation, treatment (conservative or surgical), complications and outcome were determined from the medical records. Conservative and surgical treatment consisted of stable rest, a controlled exercise program and therapeutic orthopedic shoeing. During surgical treatment, fracture reduction was also carried out with a cortical screw. Computer assisted surgery were used in five horses and computer tomography in three horses. Follow-up examinations included clinical and radiographic examinations. The outcome was divided into three categories: 1 = very good; 2 = good; 3 = poor. Twelve horses met the inclusion criteria; Four horses were treated conservatively and eight were treated surgically. After conservative treatment, two horses (50 %) had a very good outcome and two (50 %) had a good outcome. After surgical treatment, four horses (50 %) had a very good outcome and four (50 %) had a poor outcome. Overall, 67 % of horses had a very good or good outcome, although radiographic signs of bone healing was not present in any of these cases. Various complications were identified, such as the fracture of a screw, the fragmentation of the small navicular bone fragment, the development of osteoarthrosis in the coffin joint and progressive podotrochosis. This study shows that the prognosis of navicular fractures is generally cautious and that degenerative changes to the navicular apparatus worsen the prognosis. In the present study, surgical treatment did not improve the prognosis of navicular fractures despite the intrasurgical use of three-dimensional imaging. However, technical advances could reduce the complication rate in the future.

INTRODUCTION: Le but de cette étude rétrospective était de décrire et de comparer le traitement conservateur et chirurgical des fractures de l'os naviculaires chez le cheval. Une tentative est faite pour identifier les points critiques qui peuvent influencer favorablement le pronostic de cette maladie orthopédique. Tous les chevaux traités pour une fracture de l'os naviculaire à la Clinique équine de la Faculté Vetsuisse de l'Université de Zurich entre 2005 et 2017 ont été inclus dans cette étude. La gravité de la boiterie lors de l'examen initial, l'évaluation radiographique, la conformation du sabot, le traitement (conservateur ou chirurgical), les complications et le résultat ont été déterminés à partir des dossiers médicaux. Le traitement conservateur et chirurgical consistait en un repos au box, un programme d'exercice contrôlé et un ferrage orthopédique thérapeutique. Au cours du traitement chirurgical, une réduction de la fracture a également été effectuée à l'aide d'une vis corticale. La chirurgie assistée par ordinateur a été utilisée sur cinq chevaux et la tomographie assistée par ordinateur sur trois chevaux. Les examens de suivi comprenaient des examens cliniques et radiographiques. Les résultats ont été divisés en trois catégories: 1 = très bon; 2 = bon; 3 = mauvais. Douze chevaux répondaient aux critères d'inclusion ; quatre chevaux ont été traités de manière conservatrice et huit ont été traités chirurgicalement. Après un traitement conservateur, deux chevaux (50 %) ont eu un très bon résultat et deux (50 %) un bon résultat. Après le traitement chirurgical, quatre chevaux (50 %) ont eu un très bon résultat et quatre (50 %) un mauvais résultat. Dans l'ensemble, 67 % des chevaux ont eu un très bon ou un bon résultat, bien que les signes radiographiques de guérison osseuse n'aient été présents dans aucun de ces cas. Diverses complications ont été identifiées, telles que la fracture d'une vis, la fragmentation du petit fragment de l'os naviculaire, le développement d'une arthrose dans l'articulation interphalangienne distale et une podotrochlose progressive. Cette étude montre que le pronostic des fractures de l'os naviculaire est généralement réservé et que les modifications dégénératives de l'appareil naviculaire aggravent le pronostic. Dans la présente étude, le traitement chirurgical n'a pas amélioré le pronostic des fractures du naviculaire malgré l'utilisation intra-chirurgicale de l'imagerie tridimensionnelle. Cependant, les progrès techniques pourraient réduire le taux de complications dans le futur.

Correlation between plasma aldosterone concentration and bone mineral density in middle-aged and elderly hypertensive patients: potential impact on osteoporosis and future fracture risk.

Background: Previous studies have suggested that aldosterone may play a major role in calcium-phosphorus homeostasis and bone metabolism. However, the relationship between plasma aldosterone concentrations (PAC) and bone mineral density (BMD) in middle-aged and elderly hypertensive patients remains unclear. Therefore, this study sought to investigate the relationship between PAC levels and BMD and explore PAC's potential impact on osteoporosis and future fracture risk in hypertensive patients. Methods: Our study included a total of 1430 participants. Associations are tested using multiple linear and logistic regression models. Nonlinearity was investigated using the restricted cubic spline (RCS). We also performed mediating analyses to assess mediating factors mediating the relationship between PAC and osteoporosis. Results: The multiple linear regression showed a negative correlation between PAC and BMD and was generally positively associated with FRAX scores. Meanwhile, logistic regression analyses indicated that osteoporosis was highly correlated with PAC levels. In addition, a clear non-linear dose-response relationship was also shown in the constructed RCS model. Finally, mediation analyses showed that serum potassium played an important role in the development of osteoporosis. Conclusion: This study demonstrates that elevated PAC levels are strongly associated with decreased BMD, increased prevalence of osteoporosis, and the risk of future fractures in middle-aged and elderly hypertensive patients. Further studies are needed to confirm this relationship and reveal its underlying mechanisms.

Combined anatomical reduction plate for quadrilateral acetabular fractures via a posterior approach: an anatomical-morphological study.

OBJECTIVE: To digitally measure the fixation trajectory of anatomical plates used in the combined reduction of quadrilateral acetabular fractures via the posterior approach, and to develop anatomical plates that align with the characteristics of the pelvis in the Chinese population. METHODS: Pelvic computed tomography (CT) data from 102 adult patients were collected at the Affiliated Hospital of Zunyi Medical University. This group included 51 males and 51 females, aged between 20 and 60 years. Using Mimics software (version 21.0), a three-dimensional model of each pelvic data point was reconstructed. The fixation path for the combined reset anatomical steel plate was drawn, where the curves on the fixation path were approximated as arcs. The radius of curvature and length of these curves were measured, and an anatomical steel plate was designed to best fit the pelvic structure. RESULTS: The combined anatomical reduction plate fixation system for quadrilateral acetabular fractures using a posterior approach consisted of two parts: a locking plate and a reduction plate. The posterior wall region (r2), ischial region (r3), quadrilateral region (r4), and bending region (r5), and the total length of the reduction plate were significantly smaller in females (P < 0.05). Similarly, the posterior wall region (R3), distal posterior wall region (R4), and the total length of the locking plate were significantly smaller in females (P < 0.05). Additionally, the anterior superior iliac spine side (r1) and the total length of the T-shaped auxiliary plate were significantly smaller in females (P < 0.05). The bending angle (< A) was also significantly smaller in females (P < 0.05). CONCLUSIONS: The pelvic surface structure is irregular and varies greatly among individuals.Compared to the traditional steel plate, The combined reduction anatomical plate designed in this study demonstrated high precision and improved conformity to the anatomical structure of the pelvis.

The role of tuning fork in the evaluation of musculoskeletal disorders and pallesthesia: A scoping review.

BACKGROUND: Musculoskeletal and neurological conditions disorders are important conditions that need to be assessed in clinical practice. The tuning fork (TF) has been proposed as a practical tool to investigate suspected fractures and for the evaluation of pallesthesia in subjects with peripheral neuropathy. OBJECTIVE: the aim of this study is to define whether the tuning fork can be useful in the clinical evaluation of patients with musculoskeletal disorders and deep somatosensory dysfunctions. METHODS: This scoping review was performed in accordance with Joanna Briggs Institute. MEDLINE, Cochrane Library, PEDro, CINAHL, Web of Science, UpToDate, Scopus Database were consulted. RESULTS: 14 studies were included in the final analysis. Nine studies regard the use of tuning fork to detect fractures. If the tuning fork was used with a stethoscope, the test reached a high sensitivity ranging between 83% and 94%. Five studies investigated the tool to evaluate pallesthesia dysfunctions among which possible differences between biceps femoris strain and simple clinical rules for detecting peripheral neuropathy. CONCLUSION: The 128 Hz tuning fork could be potentially useful to detect some type of traumatic fractures. The Rydel-Seiffer tuning fork appears to be a useful tool for assessing potential nerve conduction deficits in the evaluation of pallesthesia.

[Intraoperative slide rail CT assistance in percutaneous sacroiliac joint screws for the treatment of pelvic posterior ring injury].

OBJECTIVE: To compare the clinical efficacy of intraoperative slide rail CT combined with C-arm X-ray assistance and just C-arm for percutaneous screw in the treatment of pelvic posterior ring injury. METHODS: A retrospective analysis was performed on the patient data of 76 patients with posterior pelvic ring injury admitted to the Department of Orthopedic Trauma from December 2018 to February 2022. Among them, 39 patients in the CT group were treated with C-arm combined with slide rail CT-assisted inline fixation including 23 males and 16 females with an average age of (44.98±7.33) years old;and the other 37 patients in the C-arm group were treated with intraline fixation treatment under only C-arm fluoroscopy including 24 males and 13 females with an average age of (44.37±10.82) years old. Among them, 42 patients with anterior ring fractures were treated with percutaneous inferior iliac spines with internal fixation (INFIX) or suprapubic support screws to fix the anterior pelvic ring. Postoperative follow-up time, operation time, complications of the two groups were compared. Results of Matta reduction criteria, Majed efficacy evaluation, the CT grading and the rate of secondary surgical revision were compared. RESULTS: The nailing time of (32.63±7.33) min in CT group was shorter than that of (52.95±10.64) min in C-arm group (t=-9.739, P<0.05). The follow-up time between CT group (11.97±1.86) months and C-arm group (12.03±1.71) months were not statistically significant(P>0.05). The postoperative complication rates between two groups were not statistically significant (χ2=0.159, P>0.05). Results of Matta reduction criteria (Z=2.79, P<0.05), Majeed efficacy evaluation(Z=2.79, P<0.05), CT grading (Z=2.83, P<0.05) in CT group were better than those in C-arm group(P<0.05); the secondary surgical revision rate in the CT group was significantly lower than that in the C-arm group (χ2=5.641, P<0.05). CONCLUSION: Compared with traditional C-arm fluoroscopy, intraoperative slide rail CT combined with C-arm assisted percutaneous sacroiliac joint screw placement surgery has the characteristics of short operation time, high accuracy and safety, and significant decrease in postoperative secondary revision rate, and is one of the effective methods for re-establishing the stability of the posterior ring of pelvic fracture.

[Antibiotic bone cement covered reconstruction plate for infected anterior pelvic ring fractures].

OBJECTIVE: To explore the clinical efficacy of antibiotic bone cement covered reconstruction steel plate in the treatment of infected anterior pelvic ring fracture. METHODS: From January 2017 to March 2022, 11 patients with infected anterior pelvic ring fracture were treated with antibiotic bone cement covered reconstruction steel plate including 7 males and 4 females and the age ranged from 27 to 49 years old. The pelvic fractures were classified according to the Tile typology: 4 cases of C1 type, 4 cases of C2 type, and 3 cases of C3 type. Among them, 2 cases of infected anterior ring were infected after internal fixation of anterior ring, and 9 patients were infected with infected anterior ring due to incomplete early debridement, which was classified as infected according to the injury severity score(ISS) for 24 to 38 scores. The anterior ring was internally fixed by extended debridement, irrigation, and antibiotic bone cement covered reconstruction plate, and the posterior ring fractures were all closed reduction and internally fixed with sacroiliac screws. RESULTS: All 11 cases obtained follow-up from 13 to 20 months. Among them, 2 patients had recurrence of postoperative infection, 1 case was re-dissected and replaced with antibiotic bone cement-coated internal fixation, and 1 case had a milder infection without accumulation of the medullary cavity, and the infection was controlled by retaining the plate and replacing the antibiotic bone cement only after dissecting. Two cases developed incisional oozing, which healed after removal of the internal fixation three months postoperatively. All patients did not show pelvic fracture redisplacement or reinfection during the follow-up period. All 11 cases eventually healed bony. At the final follow-up, according to the Matta score, the fracture reduction was excellent in 6 cases, good in 4, and possible in 1. According to the Majeed functional score, it was excellent in 6, good in 3, and possible in 2. CONCLUSION: Antibiotic bone cement covered reconstruction plate is effective in the treatment of infected anterior pelvic ring fracture, with high intraoperative safety and low recurrence rate of infection, which is conducive to the early postoperative rehabilitation and significantly shortens the course of the disease.

[Treatment of Tile type C pelvic ring fracture using orthopedic robot combined with Starr pelvis reduction frame].

OBJECTIVE: To investigate the clinical effect of orthopedic robot combined with Starr pelvic reduction frame in the treatment of Tile type C pelvic ring fracture. METHODS: From October 2019 to May 2021, 14 patients with type C pelvic ring fracture were treated with robotic combined with Starr pelvic reduction frame, including 9 males and 5 females. The age ranged from 33 to 69 years. All the 14 patients had fresh closed fractures without femur, tibia and fibula fracture. Surgery was completed from 4 to 7 d after hospital admission. During the operation, the X-ray carbon bed was used, the pelvic ring was reduced by Starr pelvis reduction frame, and pelvic ring fracture was treated by orthopedic robot. Operation time, bleeding volume, fluoroscopy times of single screw placement, fracture reduction quality, affected limb function and complications were observed. Radiological reduction was evaluated using Matta scoring standard, and clinical efficacy was evaluated by Majeed pelvic function scoring system at the final follow-up. RESULTS: All of 14 patients successfully completed the operation, the operation time was 84 to 141 min, the bleeding volume was 20 to 50 ml, and the fluoroscopy times of single screw insertion was 4 to 9 times. All of 14 patients were followed up for 12 to 24 months. The healing time was 3 to 7 months. No complications such as fracture of internal fixation, screw loosening, infection and nerve injury were found. According to the evaluation criteria of Matta imaging reduction, 9 cases were excellent, 4 cases were good, and 1 case was fair. At the final follow-up, Majeed pelvic function scoring system was used:10 cases were excellent, 4 cases were good. CONCLUSION: The treatment of type C pelvic ring fracture with robotic combined Starr pelvis reduction frame is simple, time-saving, less trauma, less complications and effective.

[Progress of anterior subcutaneous internal fixation in the treatment of anterior pelvic ring injury].

Anterior subcutaneous internal fixation (INFIX) is one of the current representatives of minimally invasive fixation of injuries to the anterior pelvic ring. The nail insertion point of this technique is located at the anterior inferior iliac spinous screw, with an angle of 30° outward and 20° backward. Screw in at an angle, and note that the screw head should be above the deep fascia and maintain a safe distance of 20 to 25 mm from the bone surface. Its improved versions include 3 or 4 nails INFIX with added pubic tubercle screws, unilateral INFIX, short-rod INFIX, and double INFIX. These improvements further enhance stability. The lateral femoral cutaneous nerve (LFCN) is relatively easy to be damaged during anatomy, so special attention should be paid during the operation. Biomechanical stability has advantages over external fixation, and its application is flexible. It is not limited to pubic ramus fracture, symphyseal separation, etc. It also plays an important role in combined anterior and posterior ring fixation. It can be combined with posterior sacroiliac screws, iliac lumbar screws, etc. Fixed etc. Good clinical results have also been reported in children, pregnant women, and people with contraindications for subcutaneous connecting rods. In addition, the current application of robots, reduction frames and other technologies has greatly reduced the difficulty of reduction and improved the quality of closed reduction, making it possible to fix complex pelvic fracture. This technique has high reduction quality and is as effective as traditional steel plates. A common complication is LFCN injury. Careful exposure and adjustment of the position and depth of internal fixation during surgery can effectively avoid this complication.

Superior versus anteroinferior plating for mid-shaft clavicle fractures: a randomized clinical trial.

BACKGROUND: Clavicle fractures represent 2.5-4% of all fractures observed in emergency services. 80% occurs in the middle third. Treatment by plating requires a higher level of evidence. OBJECTIVE: To compare the functional outcomes of mid-shaft clavicle fractures managed with superior plating compared to anteroinferior plating. TRIAL DESIGN: A randomized, double-blind, parallel, superiority clinical trial. PATIENTS AND METHODS: Patients with fractures of the clavicles AO15B1 and AO15B2 were studied. Patients were randomized to be treated with either 3.5 mm superior or anteroinferior plating. A rehabilitation program was designed for both groups. The primary outcome measure was the Disability of Arm, Shoulder, and Hand (DASH) score; secondary outcomes included pain, union rate, and complication rates. RESULTS: Twenty-eight patients were studied and were eligible for analysis. Significant differences were found in the function assessed with the DASH score at 30 days for the superior plating compared with anteroinferior (43.74 vs. 29.26, respectively, p = 0.027), 60 days (23.97 vs. 11.18, p = 0.021), and 90 days (9.52 vs. 3.5, p = 0.016). One loosening with superficial infection was found with superior plating. CONCLUSIONS: Using an anteroinferior reconstruction plate in diaphyseal fractures offers better functional results than the upper plate in patients with fractures of the middle third of the clavicle.

ANTECEDENTES: Las fracturas de clavícula comprenden el 2.5-4% de todas las fracturas observadas en los servicios de emergencia. El 80% se presentan en el tercio medio. La posición de la placa como tratamiento requiere mayor nivel de evidencia. OBJETIVO: Comparar los resultados funcionales de las fracturas diafisarias de clavícula manejadas con placa superior versus placa anteroinferior. MÉTODO: Ensayo clínico aleatorizado, doble ciego, paralelo, de superioridad. Se estudiaron pacientes con fractura diafisaria de clavícula AO15B1 y AO15B2. Se manejaron con placa de reconstrucción de 3.5 mm colocada en forma superior o anteroinferior. Se diseñó un programa de rehabilitación para ambos grupos. El resultado primario fue medido con el cuestionario DASH y los resultados secundarios incluyeron dolor, presencia de consolidación y complicaciones. RESULTADOS: Fueron elegibles para análisis 28 pacientes. Se encontraron diferencias significativas de la escala DASH a los 30 días para la maniobra superior comparada con la inferior (43.74 vs. 29.26, respectivamente; p = 0.027), a los 60 días (23.97 vs. 11.18; p = 0.021) y a los 90 días (9.52 vs. 3.5; p = 0.016). CONCLUSIONES: El uso de placa de reconstrucción anteroinferior en las fracturas diafisarias ofrece mejores resultados funcionales en comparación con la placa superior en pacientes con fracturas de tercio medio de clavícula.

[Epiphyseal fracture of the second metatarsal in adolescents: report of two cases]. / Fractura epifisaria del segundo metatarsiano en adolescentes: reporte de dos casos.

Epiphyseal fractures of the metatarsal head are a rare entity specially as an isolated injury and is rarely seen in patients with skeletal immaturity. Due lack of documentation for this type of fracture, the treatment of choice is uncertain. The purpose of the present study is to present two cases and treatment of epiphyseal fracture of the second metatarsal head, to our knowledge there are no publications for this injury.

Las fracturas epifisarias de la cabeza metatarsiana son una entidad poco frecuente, principalmente cuando se presentan de forma aislada y en raras ocasiones se ven en pacientes con inmadurez esquelética. Debido a la escasez de documentación para este tipo de fractura, el tratamiento de elección es incierto. El motivo del presente estudio es presentar dos casos de fractura epifisaria de la cabeza del segundo metatarsiano y su tratamiento, ya que para nuestro conocimiento no hay publicaciones al respecto.

A new ring fixator system for automated bone fixation.

BACKGROUND: In the field of orthopaedics, external fixators are commonly employed for treating extremity fractures and deformities. Computer-assisted systems offer a promising and less error-prone treatment alternative to manual fixation by utilising a software to plan treatments based on radiological and clinical data. Nevertheless, existing computer-assisted systems have limitations and constraints. METHODS: This work represents the culmination of a project aimed at developing a new automatised fixation system and a corresponding software to minimise human intervention and associated errors, and the developed system incorporates enhanced functionalities and has fewer constraints compared to existing systems. RESULTS: The automatised fixation system and its graphical user interface (GUI) demonstrate promising results in terms of accuracy, efficiency, and reliability. CONCLUSION: The developed fixation system and its accompanying GUI represent an improvement in computer-assisted fixation systems. Future research may focus on further refining the system and conducting clinical trials.

Double-pulley, V-shaped fixation technique for arthroscopic repair of ideberg type IA glenoid fracture.

Different techniques have been described for glenoid fractures, there is still a need for safe and effective agents to promote outcomes. From January 2016 to April 2021, the clinical data of 17 patients with pulley type IA fractures treated by the V-shaped fixation technique under shoulder arthroscopy were retrospectively analyzed. Preoperative X-ray, CT, and MRI examinations were completed. The functional score of the shoulder joint, such as the visual analog scale (VAS), Constant score, and Modified Rowe score, was used to evaluate the preoperative and final follow-up clinical outcomes. The active shoulder range of motion (ROM) was also collected preoperatively and at the final postoperative follow-up. Accordingly, intraoperative and postoperative complications were also observed. The mean follow-up was 49.52 months (16-79 months). The patients' follow-up exams showed that shoulder joint flexion, abduction, external rotation, internal rotation, and pain were not significantly different from those of the contralateral side (p > .05). The mean Constant score was 83.52 (58-98), and the average Modified Rowe score was 94.29 (70-100). X-ray and CT films of all cases showed good healing without articular depression or steps. Three patients had traumatic arthritis, with VAS <3 pain. No postoperative complications, such as infections, nerve or vessel damage, or suture anchor problems occurred during the follow-up period. Using the Double-pull, V-shaped fixation technique can stabilize the reduction of glenoid fractures while reducing the possibility of bone destruction. It is a good solution and provides an opportunity to treat rotator cuff tears associated with the procedure.