Evaluation of complications in patients with mandible fractures undergoing chronic kidney disease in the United States.

BACKGROUND: This research aims to assess the demographic characteristics, prevalence, outcomes, and complications in chronic kidney disease (CKD) patients following mandible fractures in the United States using a nationally representative database. METHODS: We analyzed data from the National Inpatient Sample from 2010 to 2019 in the United States. Patients with mandible fractures were categorized into three groups based on the International Classification of Diseases, Ninth and Tenth Revisions (ICD-9-CM and ICD-10-CM): end-stage renal disease (ESRD), non-ESRD CKD, and healthy kidney function. Chi-squared tests and analysis of variance (ANOVA) were used to compare these groups. Additionally, multivariate regression analysis was performed to determine whether CKD is an independent risk factor for complications in patients with mandible fractures. RESULTS: A total of 38,481 patients in the United States were estimated to have experienced mandible fractures between 2010 and 2019. The incidence rate of non-ESRD CKD in patients with mandible fractures significantly increased over time, while the prevalence of ESRD remained stable during the ten-year period. Compared to the healthy kidney function group, patients with chronic kidney disease exhibited higher hospital costs, longer hospitalization durations, and higher in-hospital mortality rates. Additionally, they had greater odds ratios for most of the investigated complications. CONCLUSIONS: This study revealed a steady annual increase in the morbidity rate of non-ESRD CKD among patients with mandible fractures, while ESRD prevalence remained stable over ten years. We observed a close association between chronic kidney disease and the prognosis of patients with mandible fractures. Clinicians should prioritize preventive measures and appropriate management of mandibular fractures in patients with CKD.

Complications of Open Reduction and Internal Fixation of Mandibular Condyle Fractures in Oman.

Objectives: This study aimed to report the complication rate associated with open reduction and internal fixation (ORIF) of mandibular condyle fractures in Oman. Methods: This retrospective cohort study was conducted among patients who underwent ORIF of mandibular condyle fractures at Al-Nahdha Hospital and the Sultan Qaboos University Hospital in Muscat, Oman, from January 2008 to December 2020. Data collected included patient demographics, fracture aetiology, fracture side and type, surgical approach and recorded complications and outcomes. Results: A total of 68 patients (59 males and 9 females; mean age of 30.1 years) with 83 mandibular condyle fractures underwent ORIF during the study period. Subcondylar fractures were the most common type, occurring in 62.7% of patients, while bilateral fractures were observed in 21 (30.8%) patients. The most common surgical approach was retromandibular, used in 42.2% of patients. The overall complication rate was 42.6%, with the most frequently reported complications being transient facial nerve palsy (18.1%), malocclusion (14.7%) and restricted mouth opening (10.3%). Subsequent surgical interventions to correct malocclusion were performed in 6 cases. There was no statistically significant association between the overall complication rate and the patients' clinical characteristics. Conclusion: Although ORIF of mandibular condyle fractures generally offers favourable outcomes, it carries a risk of complications.

Evaluation of bite force after microplate and miniplate osteosynthesis for the management of undisplaced or minimally displaced anterior mandibular fractures: A clinical comparative study.

BACKGROUND: Although the microplate system is commonly used for the treatment of maxillofacial fractures, its use in the fixation of mandibular fractures is not widely accepted. OBJECTIVES: The study aimed to evaluate and compare the efficacy of microplates and miniplates in osteosynthesis for the internal fixation of undisplaced and minimally displaced anterior mandibular fractures. MATERIAL AND METHODS: A total of 40 patients diagnosed with undisplaced or minimally displaced symphyseal and parasymphyseal fractures were randomly assigned to 2 study groups (group A and group B). Patients in group A (microplate group) were treated with two 0.8-mm microplates, whereas patients in group B (miniplate group) received two 2.0-mm miniplates. Bite force values were recorded in 30 healthy individuals (control group) to establish baseline values. Postoperative bite force values were recorded at various intervals and compared between the study groups and the control group. RESULTS: Both groups demonstrated a progressive improvement in the bite force. However, the bite force values recorded at the 2nd, 4th and 6th postoperative weeks were comparatively lower in the microplate group. At the six-week follow-up, the bite force values were lower in both study groups in comparison to the control group. There were no differences in the incidence of postoperative complications between the study groups. CONCLUSIONS: The use of microplates in the management of undisplaced or minimally displaced anterior mandibular fractures results in a reduction in the recovery of biting force in comparison to the conventional miniplate system.

A finite element analysis on the indication for extracting partially impacted mandibular third molars considering mandibular trauma.

BACKGROUND: Patients presenting with partially impacted lower third molars (M3) have a higher likelihood of experiencing angle fractures while simultaneously decreasing the risk of condylar fractures. However, the specific biomechanical mechanism responsible for this occurrence remains unclear. Moreover, there is an ongoing debate regarding whether the removal of M3s might actually increase the risk of condylar fractures. This study aimed to evaluate how the presence of M3s influences mandibular fractures resulting from blows to the symphysis and lateral mandibular body, and to determine the indication for extracting M3s in such cases. METHODS: Models of the mandible with a partially M3-impacted model (M3I), M3-extracted model (M3E), and M3-absent model (M3A) were generated using a computer. A traumatic blown force of 2000 N was applied to the symphysis and the right body of the mandible. Von Mises and principal stresses were analyzed, and failure indexes were determined. Two cases of mandibular linear fractures were chosen for model verification and interpretation. RESULTS: When force was applied to the symphysis, the condylar region exhibited the highest stress levels, while stress in the mandibular angle region was much less regardless of the M3 state. On applying the force to the right mandibular body, stress in the condylar region decreased while stress in the mandibular body increased, especially in the blown regions. Impacted tooth or cavity formation post-M3 extraction led to uneven stress distribution on the blown side of the mandible, increasing the risk of mandibular angle fractures. In cases where M3 was absent or the extraction socket had healed, stress from lateral traumatic blown force was evenly distributed along both the inner and outer oblique lines of the mandible, thereby reducing the risk of mandibular fractures. CONCLUSIONS: The reduced risk of condylar fractures in patients with partially impacted lower M3s and mandibular angle fractures is mainly due to lateral blows on the mandible, which generate less stress in the condylar region than blows on the mandibular symphysis, rather than being caused by the M3 itself. Extraction of the lower M3 can decrease the risk of mandibular fractures, with a minor influence on condylar fractures.

The cost of care in maxillofacial fractures treatment in relation to the type of fixation and length of stay at a tertiary care hospital of Karachi, Pakistan: A retrospective chart review.

In addition to the clinical burden of trauma, the financial burden is an important aspect of care globally, especially for patients in low- and middle-income countries. The current retrospective review was done of data from January 2015 to December 2020 related to patients of oral maxillofacial trauma management in a tertiary care setting. Analysis of variance was used to determine the mean difference in the cost incurred depending upon the type of trauma and the number of bone plates used in fracture management. Pearson correlation was applied to explore any correlation involving patient age, aetiology and type of fracture, number of bone plates employed and the length of stay in the hospital. No statistically significant differences were noted in the cost among the different groups. The cost of care was significantly (p<0.001) correlated to the length of stay. Other variables, such as the type of fractures and the number of plates, had no significant impact (p>0.05).

Functional Orthodontic Therapy for Mandibular Condyle Fracture: A Systematic Review.

The objective of this study was to compile the currently available evidence regarding the functional and morphologic outcomes of functional orthodontic therapy for mandibular condyle fracture. We performed searches in PubMed and Google Scholar as well as manually (IOK issues 2008-2019) using the keywords "trauma", "TMJ", "activator", "condylar fracture", "fracture", "mandibular condylar fracture", "occlusal splint" and "functional appliance". Screening and analysis of study eligibility were performed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The search strategy identified 198 studies published between 1971 and 2018, with 93 studies remaining after removing duplicate hits. Of the 93 studies, 19 were included in this study, considering the inclusion criteria. There were 12 follow-up, 4 prospective, and 3 purely retrospective studies. Some of the studies showed good functional results of mandibular condyle fracture treatment, in addition to subjective patient satisfaction. The incisal edge difference could be increased to physiological ranges of >35 mm by means of activator therapy. Partial mandibular deviations to the fractured side remained post-therapy, especially after unilateral fractures. Fractures without significant dislocation and luxation showed radiographic changes in shape, described as hypoplastic and ellipsoid, in addition to good morphologic results. One study found that collum length shortened twofold after a luxated fracture compared with fractures without significant dislocation, despite activator therapy. Straightening of the fragment occurred only in the low-dislocated fragments. Overall, children showed a higher remodeling potential than adult patients. Several studies observed an improved clinical outcome for functional therapy after mandibular condyle fracture. The outcome is essentially determined by fracture type, fracture height, and age. Further studies, especially prospective studies, are necessary to improve the evidence of functional orthodontic therapy for mandibular condyle fractures.

Digital technology revolutionizing mandibular fracture treatment: a comparative analysis of patient-specific plates and conventional titanium plates.

OBJECTIVES: The treatment of fractures prioritizes the restoration of functionality through the realignment of fractured segments. Conventional methods, such as titanium plates, have been employed for this purpose; however, certain limitations have been observed, leading to the development of patient-specific plates. Furthermore, recent advancements in digital technology in dentistry enable the creation of virtual models and simulations of surgical procedures. The aim was to assess the clinical effectiveness of patient-specific plates utilizing digital technology in treating mandibular fractures compared to conventional titanium plates. MATERIALS AND METHODS: Twenty patients diagnosed with mandibular fractures were included and randomly assigned to either the study or control groups. The surgical procedure comprised reduction and internal fixation utilizing patient-specific plates generated through virtual surgery planning with digital models for the study group, while the control group underwent the same procedure with conventional titanium plates. Assessment criteria included the presence of malunion, infection, sensory disturbance, subjective occlusal disturbance and occlusal force in functional maximum intercuspation (MICP). Statistical analysis involved using the Chi-square test and one-way repeated measures analysis of variance. RESULTS: All parameters showed no statistically significant differences between the study and control groups, except for the enhancement in occlusal force in functional MICP, where a statistically significant difference was observed (p = 0.000). CONCLUSION: Using patient-specific plates using digital technology has demonstrated clinical effectiveness in treating mandibular fractures, offering advantages of time efficiency and benefits for less experienced surgeons. CLINICAL RELEVANCE: Patient-specific plates combined with digital technology can be clinically effective in mandibular fracture treatment.

Risk factors for postoperative facial nerve injury in retromandibular-approach surgery: A retrospective study including CT measurements of maxillofacial bone structure.

The purpose of this retrospective study was to identify risks of postoperative facial nerve injury (FNI) in mandibular condylar fractures. A total of 59 consecutive cases of condyle fracture or plate removal with a retromandibular transparotid approach (RMTA) were divided into FNI and non-FNI groups that were evaluated for associations with age, sex, laterality, fracture type, height, weight, body mass index (BMI), and maxillofacial bone height and width diameters on computed tomography (CT). FNI occurred in 11 of 59 patients (18.64%), all of them female (p = 0.0011). Other statistically significant factors on univariate analysis for FNI included a short height (156.95 ± 8.16 cm vs. 164.29 ± 9.89 cm, p = 0.04), low weight (46.08 ± 8.03 kg vs. 58.94 ± 11.79 kg, p = 0.003), low BMI (18.64 ± 2.63 kg/m2 21.68 ± 3.02 kg/m2, p = 0.007), short condylion-anterior fracture distance (19.34 ± 3.15 mm vs. 22.26 ± 3.96 mm, p = 0.04) and short condylion-posterior fracture distance (20.12 ± 3.98 mm vs. 25.45 ± 5.02 mm, p = 0.009). Our retrospective study suggested that FNI with RMTA surgery occurs particularly in female patients and may occur more frequently in patients who are short, lean or have high condyle fractures.

Titanium vs PEO Surface-Modified Magnesium Plate Fixation in a Mandible Bone Healing Model in Sheep.

Titanium plates are the current gold standard for fracture fixation of the mandible. Magnesium alloys such as WE43 are suitable biodegradable alternatives due to their high biocompatibility and elasticity modulus close to those of cortical bone. By surface modification, the reagibility of magnesium and thus hydrogen gas accumulation per time are further reduced, bringing plate fixation with magnesium closer to clinical application. This study aimed to compare bone healing in a monocortical mandibular fracture model in sheep with a human-standard size, magnesium-based, plasma electrolytic-oxidation (PEO) surface modified miniplate fixation system following 4 and 12 weeks. Bone healing was analyzed using micro-computed tomography and histological analysis with Movat's pentachrome and Giemsa staining. For evaluation of the tissue's osteogenic activity, polychrome fluorescent labeling was performed, and vascularization was analyzed using immunohistochemical staining for alpha-smooth muscle actin. Bone density and bone mineralization did not differ significantly between titanium and magnesium (BV/TV: T1: 8.74 ± 2.30%, M1: 6.83 ± 2.89%, p = 0.589 and T2: 71.99 ± 3.13%, M2: 68.58 ± 3.74%, p = 0.394; MinB: T1: 26.16 ± 9.21%, M1: 22.15 ± 7.99%, p = 0.818 and T2: 77.56 ± 3.61%, M2: 79.06 ± 4.46%, p = 0.699). After 12 weeks, minor differences were observed regarding bone microstructure, osteogenic activity, and vascularization. There was significance with regard to bone microstructure (TrTh: T2: 0.08 ± 0.01 mm, M2: 0.06 ± 0.01 mm; p = 0.041). Nevertheless, these differences did not interfere with bone healing. In this study, adequate bone healing was observed in both groups. Only after 12 weeks were some differences detected with larger trabecular spacing and more vessel density in magnesium vs titanium plates. However, a longer observational time with full resorption of the implants should be targeted in future investigations.

An experimental study of a novel external fixator based on universal joints for the rapid initial stabilization of mandibular comminuted fractures.

PURPOSE: Shaping and assembling contemporary external fixators rapidly for the severe mandibular fractures remains a challenge, especially in emergency circumstance. We designed a novel external fixator that incorporates universal joints to provide the stabilization for mandibular comminuted fractures. This study aims to confirm the efficacy of this novel external fixator through biomechanical tests in vitro and animal experiments. METHODS: In vitro biomechanical tests were conducted using 6 fresh canine with mandibular defect to simulate critical comminuted fractures. Three mandibles were stabilized by the novel external fixator and other mandibles were fixed by 2.5 mm reconstruction plates. All fixed mandibles were subjected to loads of 350 N on the anterior regions of teeth and 550 N on the first molar of the unaffected side. The stability was evaluated based on the maximum displacement and the slope of the load-displacement curve. In animal experiments, 9 beagles with comminuted mandibular fractures were divided into 3 groups, which were treated with the novel external fixation, reconstruction plate, and dental arch bar, respectively. The general observation, the changes in animals' weight, and the surgical duration were recorded and compared among 3 groups. The CT scans were performed at various intervals of 0 day (immediately after the surgery), 3 days, 7 days, 14 days, 21 days, and 28 days to analyze the displacement of feature points on the canine mandible and situation of fracture healing at 28 days. The statistical significance was assessed by the two-way analysis of variance test followed by the Bonferroni test, enabling multiple comparisons for all tests using GraphPad Prism10.1.0 (GraphPad Inc, USA). RESULTS: The outcomes of the biomechanical tests indicated that no statistically significant differences were found in terms of the maximum displacement (p = 0.496, 0.079) and the slope of load displacement curves (p = 0.374, 0.349) under 2 load modes between the external and internal fixation groups. The animal experiment data showed that there were minor displacements of feature points between the external and internal fixation groups without statistic difference, while the arch bar group demonstrated inferior stability. The CT analysis revealed that the best fracture healing happened in the internal fixation group, followed by the external fixation and arch baring at 28 days after fixation. The external fixation group had the shortest fixation duration (25.67 ± 3.79) min compared to internal fixation ((70.67 ± 4.51) min, p < 0.001) and arch baring ((42.00 ± 3.00) min, p = 0.046). CONCLUSION: The conclusion of this study highlighted the efficacy and reliability of this novel external fixator in managing mandibular fractures rapidly, offering a viable option for the initial stabilization of comminuted mandibular fractures in the setting of emergency rescue.

Characteristics, Treatment, and Prognosis of Pediatric Symphyseal/Parasymphyseal-Condylar Fractures.

BACKGROUND: Pediatric condylar fractures combined with symphyseal or parasymphyseal fractures are common but challenging to manage. The authors present fracture characteristics, propose a treatment algorithm, and evaluate the treatment prognosis of pediatric symphyseal/parasymphyseal-condylar fractures. METHODS: A retrospective review was conducted on pediatric patients who underwent treatment for symphyseal/parasymphyseal-condylar fractures in a trauma center between January of 2006 and January of 2021. Demographic and fracture characteristics were recorded. Complications and functional evaluations, including maximum interincisal opening, Helkimo anamnestic index, and clinical dysfunction index, were assessed after at least 1 year of follow-up. RESULTS: After screening, 104 participants met the inclusion criteria. Among them, 50.96% received open reduction and internal fixation for symphyseal/parasymphyseal fractures and closed treatment for condylar fractures, 45.19% were treated by liquid diet and functional exercise, and the remaining 3.85% with severe malocclusion were treated with the assistance of orthodontic appliances. During follow-up, the average maximum interincisal opening of the patients increased from 17 ± 6.29 mm to 41.64 ± 6.33 mm. No subjective symptoms were observed in 86.54% of the patients and 79.81% showed no or mild clinical symptoms. Except for 1 patient who developed temporomandibular joint ankylosis, no other severe complication was reported. Postfracture remodeling of the nonfractured condyle was noted in 3 cases. CONCLUSIONS: Pediatric symphyseal/parasymphyseal-condylar fractures present unique biomechanical and anatomic challenges that require special consideration during management. In this study, satisfactory functional prognosis was achieved following implementation of the treatment algorithm. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Factors contributing to non-union amongst dentate mandibular fractures treated by load-sharing miniplate osteosynthesis: a case-control study.

The stability provided by load-sharing miniplate osteosynthesis (LSMO) in dentate mandibular fractures (DMF) is usually adequate for bony healing. Non-union following LSMO is an uncommon complication. We aimed to determine the incidence and identify contributing factors, if any, of non-union amongst DMFs that have undergone LSMO. This retrospective case-control study with an allocation ratio of 1:3 includes cases of non-union DMF following LSMO and controls with healed DMF following LSMO over a five-year period. Relevant sociodemographic data, mandibular fracture characteristics, and treatment variables were collected for both groups. Of the 381 patients who underwent LSMO for DMFs, 12 cases of non-union were identified. The control group included 36 patients with uncomplicated healing. A significant association was observed between non-union and teeth in the line of fracture, postoperative infections, and time from injury to LSMO. The odds ratio with chronic alcohol usage was 1.4. Vigilant follow up of patients with chronic alcohol use, those with teeth in the fracture line, and adherence to LSMO principles may help to minimise the non-union complication.

Novel Design of Interlocking 3-Dimensional Miniplate in Mandibular Angle Fractures: An In Vitro Study.

The evolution of osteosynthesis has led to the development of novel miniplate designs, including 3-dimensional (3D) miniplates, which offer improved biomechanical stability. However, mandible fractures resulting from the high impact have a complex fracture configuration. Hence, the authors developed interlocking 3D miniplate to overcome the difficulty in miniplate and screw placement to avoid critical anatomic structures, that is, dental roots and nerve, while still providing stability for the fracture fragments. The interlocking 3D miniplates can be formed according to the specific needs by adjusting the horizontal and vertical cross struts configuration. This study describes a design process of interlocking 3D miniplates and evaluates biomechanical performance compared to standard miniplates. Finite element analysis was performed to evaluate the design's stress state using human and goat mandible models under various loading conditions. After the authors, established that our design was feasible for fabrication, the authors developed the prototype for biomechanical testing. Biomechanical testing was conducted on 10 goat mandibles to compare stability and displacement under various load between the interlocking 3D miniplate and the standard miniplate configuration. Biomechanical testing revealed reduced displacement in all directions with the interlocking 3D miniplate compared to the standard miniplate. Furthermore, there was a significant difference in all loads in the buccal-lingual displacement ( P <0.05). The novel interlocking 3D miniplate design shows an adequate ability to provide stability for fixation for mandibular fractures, as evidenced by finite element analysis and biomechanical testing. Further research is necessary to validate these findings and explore the clinical application of interlocking 3D miniplates in mandibular fracture management.

Electromyographic Study of Facial Nerve Function Using Two Different Surgical Approaches in Low Condylar Fractures of the Mandible: A Randomized Controlled Clinical Trial.

BACKGROUND: Facial nerve (FN) dysfunction is a potential complication during open reduction of mandibular condylar fractures. PURPOSE: The purpose of this study was to measure and compare the postoperative FN function following transparotid (TP) and transmasseteric anterior parotid (TMAP) operative approaches in open reduction and internal fixation of condylar fractures using electromyogram. STUDY DESIGN, SETTING, SAMPLE: A randomized controlled clinical trial was designed. The study was conducted in a single tertiary-care hospital in the inpatient setting. Patients aged above 18 years with unilateral condylar fracture of the jaw or bilateral condylar fractures undergoing surgery on only 1 side were included. Patients were excluded if they had fractures of the head, bilateral condylar fractures with surgery planned on both sides, a previous history of surgery in the retromandibular area, existing lacerations to approach condyle, preoperative signs of FN weakness, or a history of parotid surgery. PREDICTOR VARIABLE: The predictor variable was the operative approach and the subjects were allocated randomly to TMAP and TP. MAIN OUTCOME VARIABLE(S): The primary outcome variable was postoperative FN function in the surgical approach employed using the House-Brackmann scale and electromyography (EMG) to record any subtle weakness in nerve function. The FN function is recorded at 3 time intervals postoperatively 1 week (T1), 1 month (T2), and 3 months (T3). The secondary outcomes studied were operating time and any other complications recorded. COVARIATES: Age, sex, fracture pattern with classification of condylar fractures into condylar neck or base fractures according to Loukata et al.4 Any associated fracture of mandible describing the anatomical location viz symphysis and parasymphysis (anterior mandible), body, contralateral condyle or greater than 1 associated fracture were recorded. Similarly, the presence or absence of any associated midface fracture was also recorded to suggest that the study participants were homogenous in all aspects. ANALYSES: Analytical statistics included χ2 test, t-test, and repeated measures ANOVA followed by post hoc test to compare EMG data (mean power and mean amplitude) between 2 operative approaches (TP vs TMAP) for facial muscles including frontalis, oculi, and buccinator at different time intervals (T0, T1, T2, T3). Patients within each group were also analyzed to check for nerve recovery occurring during the follow-up period. The level of significance was set at P < .05. RESULTS: The study sample was composed of 22 patients with a mean age of 32.82 ± 11.21 years in TMAP and 27.82 ± 8.54 years in the TP group respectively (P = .26); male predominance of 81.8 and 90.9% in TMAP and TP group respectively (P = .53) was noted. The FN deficit as assessed by the House-Brackmann scale clinically, was at 54% (T1), 36.4% (T2), and 9.1% (T3) for the TP group and 27% (T1),9% (T2), and 0% (T3) for TMAP group; however, the results were statistically insignificant (P = .31). In surface EMG evaluation, the mean power for the frontalis muscle was significantly higher in the TMAP approach at the T3 time (105.03 ± 9.7 vs 89.56 ± 10; 95% confidence interval -24.28 to -6.65 with P value = .002). TP approach was faster with a mean exposure time of 9.9 minutes. CONCLUSION AND RELEVANCE: The results show that both approaches give comparable long-term results with the TMAP group showing better frontalis muscle activity.

Current Strategies for Treatment of Mandibular Fractures With Plate Osteosynthesis: A European Prospective Study.

PURPOSE: The training and preferences of surgeons influence the type of surgical treatment for mandibular fractures. This multicentre prospective study analyzed the current treatment strategies and outcomes for mandibular fractures with open reduction and internal fixation (ORIF). MATERIAL AND METHODS: This prospective study included patients aged ≥16 years who underwent ORIF for mandibular fractures in 12 European maxillofacial centers. Age, sex, pretrauma dental status, fracture cause, site and type, associated facial fractures, surgical approach, plate number and thickness (≤1.4 or ≥1.5 mm), duration of postoperative maxillomandibular fixation, occlusal and infective complications at 6 weeks and 3 months, and revision surgeries were recorded. RESULTS: Between May 1, 2021 and April 30, 2022, 425 patients (194 single, 182 double, and 49 triple mandibular fractures) underwent ORIF for 1 or more fractures. Rigid osteosynthesis was performed for 74% of fractures and was significantly associated with displaced ( P =0.01) and comminuted ( P =0.03) fractures and with the number of nonsurgically treated fracture sites ( P =0.002). The angle was the only site associated with nonrigid osteosynthesis ( P <0.001). Malocclusions (5.6%) and infective complications (5.4%) were not associated with osteosynthesis type. CONCLUSION: Rigid osteosynthesis was the most frequently performed treatment at all fracture sites, except the mandibular angle, and was significantly associated with displaced and comminuted fractures and the number of nonsurgically treated fracture sites. No significant differences were observed regarding postoperative malocclusion or infections among osteosynthesis types.

Relationship between mandibular third molars and mandibular angle and condylar fractures.

BACKGROUND: Assess the correlation between the position of the third molar (M3) and fractures of the mandibular angle and condyle using panoramic radiographs to offer valuable data references for oral clinical research. MATERIAL AND METHODS: A retrospective cross-sectional study was undertaken, involving the collection of 409 cases of mandibular fracture in the Yanbian University Hospital. The case records and panoramic radiographs of mandibular angle fracture (78 cases) and condylar fracture (106 cases) were evaluated. RESULTS: In the comparative analysis between the mandibular angle fracture group and the condylar fracture group, statistical significance was observed in the variables of M3 existence (P = 0.002), eruption of M3 from the alveolar cavity (P = 0.003), P&G position classification (P = 0.001), deep impactions (Classes IC, IIC, IIIB, and IIIC) (P < 0.001), and the presence of impacted M3 in both groups (P < 0.001).Regarding M3 roots, the mandibular angle fracture group exhibited the highest prevalence of multiple roots at 75.4%, surpassing the 64.6% observed in the condylar fracture group. The prevalence of proximal angles in the mandibular angle group and the condyle group was the highest, accounting for 64.6% and 61.5%, respectively. The percentage of M3 in the two groups was 80% and 43.1%, respectively, with a significant difference (P < 0.001). CONCLUSIONS: Impacted mandibular third molars (M3) elevate the risk of mandibular angle fractures, while their absence or normal eruption reduces this risk and protects against condylar process fractures. The fracture risk is influenced by the M3's position: P&G Class II and Class B impactions, where M3s emerge partially from the alveolar bone, are significantly associated with mandibular angle fractures. In contrast, the absence of M3 or its placement in P&G Class I and Class A positions tends to correlate with a higher incidence of condylar process fractures.

Management of the atrophic mandibular fractures: a ten-year prospective study of 48 injuries.

PURPOSE: The purpose of this study was to (a) record and evaluate the epidemiological data relevant to the fractures of the atrophic mandible in the Greek population (b) present our experience in the management of these difficult injuries and (c) compare our results to the outcomes of other similar studies and discuss the postoperative complications. METHODS: A prospective analysis of all the edentulous patients with fractures of the atrophic mandible treated at the Oral and Maxillofacial Surgery Department of K.A.T General Hospital of Athens in Greece was performed from November 2012 to December 2022. Age, gender and medical history of the patient, etiology and site of the fracture, classification of atrophy, type of surgical approach, type of osteosynthesis and postoperative complication. RESULTS: 34 patients were included in the present study and 48 fractures of the atrophic edentulous mandible were managed surgically. 22 fractures were classified as class II of atrophy, 21 fractures as class III and 5 injuries as class I. In 32 patients we used an extraoral approach and only 2 patients were treated with an intraoral access. 44 fractures were treated with a 2.0 mm locking reconstruction plate and only 4 injuries of class I atrophy were treated with mini plates. CONCLUSIONS: Clinical practice has confirmed that for these cases an extraoral approach followed by stable fixation with a 2.0 mm reconstruction locking plate can deliver excellent results. Our findings show that the routine use of primary bone grafts is not necessary and can be reserved for more complex cases.

Evaluation of residual bone mass of the mandibular third molar and the risk of mandibular fracture.

BACKGROUND: A quantification of the residual bone mass of the mandible (B/A) was utilized in this study to examine the correlation between mandibular fracture and residual bone mass. To improve the clinical utilization rate and reduce the incidence of iatrogenic mandibular fractures, the B/A ratio calculation should be simplified. MATERIAL AND METHODS: Data were collected from the Yanbian University Hospital on 175 cases of mandibular fracture with third molar (M3), 67 normal cases without fractures and 20 cases of impacted teeth extraction. Twenty cases of iatrogenic mandibular fracture were collected, and the case records and panoramic radiographs of the patients were recorded. RESULTS: The average B/A ratio of mandibular angle fracture group was 0.61±0.10.The value of B/A was found to be statistically significant in terms of whether M3 emerged from alveolar bone (P = 0.001), location (horizontal P < 0.001, vertical P < 0.001), the degree of impaction (P < 0.001), the number of roots (P < 0.001), the difference in impaction (P < 0.001), and the fracture type (P = 0.002). The average B/A ratio of normal group was 0.62±0.10. In the statistical results of the B/A value of normal patients, M3 involving alveolar bone (P < 0.001), position classification (P < 0.05), degree of impaction (P < 0.001) and presence or absence of a root (P < 0.05) were statistically significant. The average B/A ratio of iatrogenic mandibular angle fracture group was 0.28±0.08. The average B/A ratio of the extraction group for impacted teeth was 0.62 ± 0.09. CONCLUSIONS: There is a high risk of mandibular angle fracture when the (B/A) value of the residual bone height (B) in the mandibular M3 area compared to the mandibular bone height (A) in the M3 area is less than 0.4.

[Fractures of the mandibular condyle]. / Fracturen van het collum mandibulae.

A fracture of the mandibular condyle is a common fracture of the mandible. After the diagnosis has been made, there are various treatment options: wait and see, conservative or surgical. Which of these treatment options is best depends on several different factors and is often the subject of debate. A common complication of a fracture of the mandibular condyle is malocclusion. Malocclusion can cause problems - even in the long term - for which the patient often requires secondary treatment.

Transoral endoscopic assisted reduction and internal fixation of mandibular condylar neck fractures with short condylar segment.

This study aimed to assess the reliability and safety of transoral endoscopic-assisted reduction internal fixation (TERIF) for treating short-segment condylar neck fractures (CNF), including hardware removal. Patients with displaced CNF and short condylar segments treated using TERIF were included in the study. Clinical evaluation covered dental occlusion, range of mouth opening, deviation during mouth opening, protrusion, laterotrusion, pain, and chewing. Radiological evaluation was used to assess fracture displacement, angulation, head dislocation, postoperative reduction, fixation stability, and bone healing. The same technique was used to treat 15 patients with 18 CNF and short condylar segments. Hardware removal was performed for nine fractures in eight patients after fracture healing using the same approach. All patients regained satisfactory, pain-free mouth opening with no deviation and complete bone healing. Computed tomographic images displayed adequate reduction and stable fixation during the follow-up period for all patients. No temporary or permanent facial nerve impairment occurred in any of the patients. TERIF is a reliable and safe treatment for CNF with short condylar segments, even in the presence of head dislocation, medial override, and malunited fractures; hardware can be safely removed after healing using the same approach.