Peri-implant soft tissue volume changes after microsurgical envelope technique with a connective tissue graft. A 5-year retrospective case series.

AIM: The aim of the present retrospective case series was to longitudinally assess soft tissue volume changes on the vestibular aspect of implants in relation to keratinized mucosa thickness (KMT) and width (KMW) after the application of the microsurgical envelope technique combined with a connective tissue graft (CTG). MATERIALS AND METHODS: A total of 12 healthy patients received 12 dental implants placed either in the posterior maxilla or mandible. The study involved the harvesting of 12 CTGs with a minimally invasive single-incision technique, grafted to the vestibular peri-implant soft tissue utilizing the envelope technique, followed by the insertion of 12 screw-retained IPS e.max crowns. RESULTS: The healing process was uneventful across all areas, and all patients were followed up for a period of 5 years. The evaluation of KMT showed the highest decrease in the first 6 weeks after surgery (5.5 ± 0.79 to 4.59 ± 0.62 mm), then dropped slightly to 4 ± 0.85 mm, after which it maintained at 4 ± 0.36 mm until the 2-year time point. Between the second and third years after surgery, a further decrease of 3.59 ± 0.42 mm was recorded for KMT, which then remained constant until the end of the 5-year research period. The observations regarding KMW were slightly different, with the measurements demonstrating the greatest decrease in first 6 weeks (from 2.5 ± 0.42 to 1.5 ± 0.42 mm), which was maintained until the 1-year time point. Between the first and second years after surgery, the KMW increased to 2 ± 0.60 mm and remained level for the next 3 years, at 2 ± 0.85 mm. CONCLUSIONS: The current research demonstrated the advantages of using a combination of a minimally invasively harvested CTG and the microsurgical envelope technique for a duration of 5 years.

Determination of mandibular distraction osteogenesis most suitable parameters. An experimental study.

BACKGROUND: Distraction osteogenesis is a process of induced bone generation. Various protocols have been described for the management of the latency period, distraction speed and consolidation period, with greater or lesser success. OBJECTIVE: To better understand the process of mandibular distraction and establish the determining factors and their optimal times. MATERIAL AND METHODS: Twenty-seven dogs were studied, which had 54 distractors placed and that underwent unidirectional, bilateral mandibular distraction osteogenesis. The distraction processes were applied using six variants, two for each factor: latency period, distraction period and distraction speed. The changes were examined by means of bone biopsies and X-rays of the area at 0, 7, 14, 21, 45 and 55 days of the process. RESULTS: The most efficient osteogenic distraction parameters were a latency period of five days, a consolidation period of six weeks, distraction speed of 1 mm/day for distances of less than 20 mm, and 3 mm/day for longer distances. CONCLUSIONS: The sequential histological study allowed to observe the appearance of cellular elements (osteocytes, osteoclasts, osteoid matrix, trabeculate, etc.) and their participation in granulation tissue, newly-formed bone and compact mature bone.

ANTECEDENTES: Respecto a la distracción osteogénica (generación ósea inducida), con mayor o menor éxito han sido descritos diversos protocolos para el manejo del período de latencia, velocidad de distracción y período de consolidación. ­. OBJETIVO: Entender mejor el proceso de la distracción mandibular y establecer los factores determinantes y sus tiempos óptimos. MATERIAL Y MÉTODOS: Se estudiaron 27 perros sometidos a distracción osteogénica unidireccional, bilateral de la mandíbula. Los procesos de distracción se aplicaron con seis variantes, dos por cada factor (período de latencia, período de distracción y velocidad de distracción). Se estudiaron los cambios mediante biopsias del hueso y radiografías de la zona a los 0, 7, 14, 21, 45 y 55 días del proceso. RESULTADOS: Los parámetros de distracción osteogénica más eficientes fueron período de latencia de cinco días, período de consolidación de seis semanas, 1 mm diario de velocidad de distracción para distancias menores a 20 mm y 3 mm diarios para distancias mayores. CONCLUSIONES: El estudio histológico secuencial permitió observar la aparición de los elementos celulares (osteocitos, osteoclastos, matriz osteoide, trabeculado, etcétera) y su participación en el tejido de granulación, el hueso neoformado y el hueso maduro compacto.

Deciduous pulp tissue implantation into the root canal of mandibular incisor resulted in pulp revascularization: a case report with a 5-year follow-up.

To explore a new method to implant deciduous tooth pulp into the canal of young permanent teeth with necrotic pulps and apical periodontitis for the regenerative endodontic treatment of tooth no: 41 in a 7-year-old male. Briefly, 1.5% Sodium Hypochlorite (NaOCl) irrigation and calcium hydroxide-iodoform paste were used as root canal disinfectant at the first visit. After 2 weeks, the intracanal medication was removed, and the root canal was slowly rinsed with 17% Ethylene Diamine Tetraacetic Acid (EDTA), followed by flushing with 20 mL saline and then drying with paper points. Tooth no: 72 was extracted, and its pulp was extracted and subsequently implanted into the disinfected root canal along with induced apical bleeding. Calcium hydroxide iodoform paste was gently placed over the bleeding clot, and after forming a mineral trioxide aggregate (MTA) coronal barrier, the accessed cavities were restored using Z350 resin composite. The root developments were evaluated via radiographic imaging at 6 months, 1 year and 5 years after treatment. Imaging and clinical analysis showed closure of the apical foramen, thickening of the root canal wall, and satisfactory root length growth. Autologous transplantation might be useful to regenerate dental pulp in necrotic young permanent teeth.

Accuracy of the novel digital non-cross-arch surgical guides with integration of tooth undercut retention and screw-bone support for implant placement in mandibular free-end.

BACKGROUND: Large cross-arch free-end surgical guides can obscure the visual field, compromising surgical accuracy due to insufficient stability at the free-end. This in vitro study aims to evaluate the accuracy of novel digital non-cross-arch surgical guides designed for implant placement at the mandibular free-end, incorporating tooth undercut retention and screw-bone support. MATERIALS AND METHODS: A mandibular dental model lacking left molars was utilized to fabricate unilateral (cross-arch) tooth-supported surgical guides (GT I, n = 20). Subsequently, two additional types of surgical guides were fabricated: GT II (covering two teeth, n = 20) and GT III (covering three teeth, n = 20). These novel surgical guides were designed to utilize the undercut of the supporting teeth for retention and enhance stability with screw-bone support at the guide's free-end. Furthermore, 60 identical guiding blocks were assembled on the three types of surgical guides to facilitate the implants' insertion. On a phantom head, 120 implant replicas were placed at the Federal Dentaire Internationale (FDI) teeth positions #36 and #37 on the dental model, employing a combination of surgical guides and guiding blocks. To assess accuracy, planned and placed implant positions were compared using intraoral optical scanning. Discrepancies in angulation and linear deviations, including the coronal/apical 3D deviations, lateral deviation as well as depth deviation, were measured. Statistical analysis was performed using two-way ANOVA and Bonferroni test (α = 0.05). RESULTS: GT I exhibited significantly largest discrepancies, including angular and linear deviations at the crest and apex at every implant site. Especially in depth, at implant site #36, the mean deviation value of GT I (0.27 ± 0.13 mm) was twice as large as GT III (0.13 ± 0.07 mm), and almost twice as large as GT II (0.14 ± 0.08 mm). However, at implant site #37, this deviation increased to almost a five-fold relationship between GT I (0.63 ± 0.12 mm) and II (0.14 ± 0.09 mm), as well as between GT I and III (0.13 ± 0.09 mm). No significant discrepancies existed between the novel surgical guides at either implant site #36 or #37. CONCLUSION: This study provides a practical protocol for enhancing accuracy of implant placement and reducing the size of free-end surgical guides used at mandibular molar sites.

Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis.

OBJECTIVE: This study used image-based finite element analysis (FEA) to assess the biomechanical changes in mandibular first molars resulting from alterations in the position of the root canal isthmus. METHODS: A healthy mandibular first molar, characterized by two intact root canals and a cavity-free surface, was selected as the subject. A three-dimensional model for the molar was established using scanned images of the patient's mandibular teeth. Subsequently, four distinct finite element models were created, each representing varied root canal morphologies: non-isthmus (Group A), isthmus located at the upper 1/3 of the root (Group B), middle 1/3 of the root (Group C), and lower 1/3 of the root (Group D). A static load of 200 N was applied along the tooth's longitudinal axis on the occlusal surface to simulate regular chewing forces. The biomechanical assessment was conducted regarding the mechanical stress profile within the root dentin. The equivalent stress (Von Mises stress) was used to assess the biomechanical features of mandibular teeth under mechanical loading. RESULTS: In Group A (without an isthmus), the maximum stress was 22.2 MPa, while experimental groups with an isthmus exhibited higher stresses, reaching up to 29.4 MPa. All maximum stresses were concentrated near the apical foramen. The presence of the isthmus modified the stress distribution in the dentin wall of the tooth canal. Notably, dentin stresses at specific locations demonstrated differences: at 8 mm from the root tip, Group B: 13.6 MPa vs. Group A: 11.4 MPa; at 3 mm from the root tip, Group C: 14.2 MPa vs. Group A: 4.5 MPa; at 1 mm from the root tip, Group D: 25.1 MPa vs. Group A: 10.3 MPa. The maximum stress in the root canal dentin within the isthmus region was located either at the top or bottom of the isthmus. CONCLUSION: A root canal isthmus modifies the stress profile within the dentin. The maximum stress occurs near the apical foramen and significantly increases when the isthmus is located closer to the apical foramina.

Productizing Nano-Bioactive Glass-Based Bilayer Scaffolds: A Graft for Reconstruction of Mandibular and Femoral Bone Defects.

This investigation aimed to construct a bilayer scaffold integrating alginate and gelatin with nanobioactive glass (BG), recognized for their efficacy in tissue regeneration and drug delivery. Scaffolds, namely, alginate/gelatin (AG), alginate-/actonel gelatin (AGD), alginate actenol/gelatin-45S5 BG (4AGD), and alginate-actonel/gelatin-59S BG (5AGD), were assembled using a cost-effective freeze-drying method, followed by detailed structural investigation via powder X-ray diffraction as well as morphological characterization using field emission scanning electron microscopy (FESEM). FESEM revealed a honeycomb-like morphology with distinct pore sizes for nutrient, oxygen, and drug transport. The scaffolds evidently exhibited hemocompatibility, high porosity, good swelling capacity, and biodegradability. In vitro studies demonstrated sustained drug release, particularly for scaffolds containing actonel. In vivo tests showed that the bilayer scaffold promoted new bone formation, surpassing the control group in bone area increase. The interaction of the scaffold with collagen and released ions improved the osteoblastic function and bone volume fraction. The findings suggest that this bilayer scaffold could be beneficial for treating critical-sized bone defects, especially in the mandibular and femoral regions.

Artificial intelligence in age and sex determination using maxillofacial radiographs: A systematic review.

In the past few years, there has been an enormous increase in the application of artificial intelligence and its adoption in multiple fields, including healthcare. Forensic medicine and forensic odontology have tremendous scope for development using AI. In cases of severe burns, complete loss of tissue, complete or partial loss of bony structure, decayed bodies, mass disaster victim identification, etc., there is a need for prompt identification of the bony remains. The mandible, is the strongest bone of the facial region, is highly resistant to undue mechanical, chemical or physical impacts and has been widely used in many studies to determine age and sexual dimorphism. Radiographic estimation of the jaw bone for age and sex is more workable since it is simple and can be applied equally to both dead and living cases to aid in the identification process. Hence, this systematic review is focused on various AI tools for age and sex determination in maxillofacial radiographs. The data was obtained through searching for the articles across various search engines, published from January 2013 to March 2023. QUADAS 2 was used for qualitative synthesis, followed by a Cochrane diagnostic test accuracy review for the risk of bias analysis of the included studies. The results of the studies are highly optimistic. The accuracy and precision obtained are comparable to those of a human examiner. These models, when designed with the right kind of data, can be of tremendous use in medico legal scenarios and disaster victim identification.

Are computed tomography images of the mandible useful in age and sex determination? A forensic science meta-analysis.

OBJECTIVES: This meta-analysis addresses the use of mandibular computed tomography (CT) scans for age and/or sex determination in forensic science. METHODS: Six databases were searched until June 2023, using the keyword "mandible" combined with keywords related to "multislice computed tomography" (MCT) or "cone-beam computed tomography" (CBCT) and keywords related to "skeletal age determination" or "sex determination analysis." MAIN RESULTS: Among the 23 studies included, 11 used MCT and 12 used CBCT to perform forensic assessments. Age determination was the aim of a single study, sex and agedeterminations were the objective of five studies, and the other studies investigated the determination of sex only. Metaanalysis could be performed only for sex determination. CONCLUSIONS: Mandible measurements are useful in sex determination, as the bicondylar and bigonial breadth are larger in males than in females. For the mandible angle, the meta-analysis results confirm sex dimorphism in CBCT scans but not in MCT scans. For age estimation, further studies are needed to prove that the mandible hole is a reliable parameter for age estimation. PROSPERO registration number: CRD42021260967.

Solitary primary intraosseous xanthoma of the mandible in a 15-year-old boy: a case report.

BACKGROUND: A xanthoma is a rare bone condition consisting of a predominant collection of lipid-rich, foamy histiocytes. The central xanthoma of the jaws is a unique benign tumor. CASE REPORT: A 15-year-old Caucasian male has been presented to our department. He had radiological changes in the area of the left mandibular angle, with an area of diffuse osteolysis of 3.0 cm by 2.0 cm. Computed tomography reveals an area of diffuse osteolysis that starts from the distal root of the lower second molar and reaches the ascending process. A bone biopsy was performed, which revealed a benign proliferative process composed of histiocytic cells involving and infiltrating trabecular bone in a background of loose fibrous connective tissue devoid of any other significant inflammatory infiltrate. The size of the formation was 2.9 cm by 2.0 cm. Immunohistochemical staining for CD68 was strongly positive and negative for S-100 and CD1a. From routine blood tests, cholesterol, triglycerides, and blood sugar are within normal values, which excludes systemic metabolic disease. Subsequent to the surgical intervention, the patient underwent postoperative assessments at intervals of 14, 30, 60 days, and a year later, revealing the absence of any discernible complications during the aforementioned observation periods. CONCLUSION: The diagnosis of primary xanthoma of the mandible is rare and can often be confused with other histiocytic lesions. A differential diagnosis should be made with nonossifying fibroma and Langerhans cell histiocytosis, as in our case. In these cases, immunohistochemistry with CD 68, S-100, and CD1a, as well as blood parameters, are crucial for the diagnosis.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

Risk factors associated with the severity of pericoronitis of mandibular third molar.

PURPOSE: The factors related to pericoronitis severity are unclear, and this study aimed to address this knowledge gap. MATERIALS AND METHODS: In total, 113 patients with pericoronitis were included, and their demographic, clinical, and radiographic characteristics were recorded. The Patient-Clinician Pericoronitis Classification was used to score and categorize the severity of pericoronitis. Statistical analysis was conducted to examine the participants' characteristics, validity of the Patient-Clinician Pericoronitis Classification, and risk factors associated with the severity of pericoronitis. RESULTS: The demographic, clinical, and radiographic characteristics of males and females were similar, except for Winter's classification, pain, and intraoral swelling. The constructive validity of the Patient-Clinician Pericoronitis Classification was confirmed with three latent factors, including infection level, patient discomfort, and social interference. Ordinal logistic multivariate regression analysis revealed that upper respiratory tract infection was the sole risk factor associated with pericoronitis severity in males (odds ratio = 4.838). In females, pericoronitis on the right side (odds ratio = 2.486), distal radiolucency (odds ratio = 5.203), and menstruation (odds ratio = 3.416) were significant risk factors. CONCLUSION: This study demonstrated the constructive validity of the Patient-Clinician Pericoronitis Classification. Among females, pericoronitis in mandibular third molars on the right side with radiolucency in menstruating individuals was more severe. In males, upper respiratory tract infection was the sole risk factor associated with pericoronitis severity. CLINICAL RELEVANCE: Individuals with risk factors should be aware of severe pericoronitis in the coming future.

Full life cycle changes of low impacted mandibular third molar associated cystic lesions and adjacent tooth root resorption: a retrospective study.

OBJECTIVE: Low impacted third molars are usually asymptomatic and are often found by X-ray examination. The removal of asymptomatic low impacted third molars is one of the most controversial clinical issues in oral and maxillofacial surgery. METHODS: In this study, 806 patients with low impacted mandibular third molars (LIMTMs) (full bony impaction) were analyzed to determine the prevalence and risk factors for cystic lesions and adjacent tooth root resorption throughout the patients' entire life cycle. RESULTS: The results showed that the prevalence of adjacent tooth root resorption and cystic lesions was age-related, exhibiting a trend of first increasing and then decreasing; prevalence peaked at the age of 41 to 45 years old, the prevalence rates were 12.50% and 11.11% respectively. And the lowest prevalence rate was 2.86% and 2.44% in ≥ 61 group and 56- to 60-year age group respectively. Age was an independent risk factor for adjacent tooth root resorption of LIMTMs, whereas age and impaction type (especially inverted impaction) were independent risk factors for cystic lesions. CONCLUSIONS: The full life cycle management strategy for LIMTMs may need to be individualized. Surgical removal is recommended for LIMTMs in patients younger than 41 to 45 years, especially for inverted, mesioangular, and horizontally impacted LIMTMs. LIMTMs in patients older than 41 to 45 years may be treated conservatively with regular follow-up, but surgical removal of inverted impacted LIMTMs is still recommended to avoid cyst formation.

Patient-specific beta-tricalcium phosphate scaffold for customized alveolar ridge augmentation: a case report : Case Report: patient-specific ß-TCP scaffold for alveolar ridge CBR.

BACKGROUND: Beta-tricalcium phosphate (ß-TCP) is a biocompatible ceramic material widely used in the field of oral regeneration. Due to its excellent biological and mechanical properties, it is increasingly utilized for alveolar ridge augmentation or guided bone regeneration (GBR). With recent advances in computer-aided design and manufacturing (CAD/CAM), ß-TCP can now be used in the form of digitally designed patient-specific scaffolds for customized bone regeneration (CBR) of advanced defects in a two-stage implant therapy concept. In this case report following the CARE case report guidelines, we present a novel application of a patient-specific ß-TCP scaffold in pre-implant mandibular alveolar ridge augmentation. CASE PRESENTATION: A 63-year-old female patient with significant horizontal bone loss in the posterior mandible was treated with a custom ß-TCP scaffold in the context of a two-stage backward-planned implant therapy. Cone-beam computed tomography nine months after augmentation showed successful integration of the scaffold into the surrounding bone, allowing implant placement. Follow-up until two years after initial surgery showed excellent oral and peri-implant health. CONCLUSIONS: This case highlights the potential of patient-specific ß-TCP scaffolds for alveolar ridge augmentation and their advantage over traditional techniques, including avoidance of xeno-, allo-, and autografts. The results provide encouraging evidence for their use in clinical practice. Patient-specific ß-TCP scaffolds may be a promising alternative for clinicians seeking to provide their patients with safe, predictable, and effective alveolar ridge augmentation results in customized bone regeneration procedures.

Application of concentrated growth factor in mandibular third molar extraction: A protocol for systematic review and meta-analysis.

OBJECTIVE: We will perform the systematic review to evaluate the effect of applying concentrated growth factor (CGF) on relieving postoperative complications and promoting wound healing following mandibular third molar extraction. METHODS: The PubMed, Web of Science, Embase, Cochrane Library, China National Knowledge Infrastructure (CNKI), Wanfang Database, China Biology Medicine Disc (CBM), and VIP Databases will be comprehensively searched up to May 31, 2024. Randomized controlled trials (RCTs) examining the application of CGF after mandibular third molar extraction will be included. The protocol was registered in PROSPERO, and the registration ID was CRD42023463234. Two reviewers will conduct the literature search, eligible study selection, data extraction, and bias risk assessment (using the Cochrane Risk of Bias 2.0 tool). Data analysis will be performed with RevMan software (version 5.4). RESULTS: The results of this study will be available in a peer-reviewed journal. CONCLUSION: Our study will provide scientific evidence regarding the efficacy of applying CGF in mandibular third molar extraction.

Comparative efficacy of digital panoramic radiograph and cone beam computed tomography in locating mandibular foramen.

OBJECTIVE: The aim of this study was to compare the accuracy of panoramic radiographs (PAN) with cone-beam computed tomography (CBCT) in locating the position of the mandibular foramen (MF). PATIENTS AND METHODS: A total of 100 patients who underwent CBCT and panoramic imaging were included in the study. The location of the MF was evaluated anterior-posteriorly and superior-inferiorly on both CBCT and panoramic radiographs. Measurements were taken by two examiners, reviewed by a radiologist, and intra-examiner variability was assessed. A comparison of statistical analysis was performed using the Mann-Whitney U test, independent and paired t-test. A p-value ≤0.05 was deemed significant. RESULTS: The mean age of the patients was 35.03 years, with 51% females and 49% males. CBCT and panoramic radiographs showed comparable accuracy in locating the left (p=0.937) and right (p=0.371) MF anterior-posteriorly. In the superior-inferior dimension, the accuracy of CBCT and panoramic radiographs were comparable in locating the right (p=0.292) and left (p=0.640) MF. The gender-based accuracy of PAN and CBCT radiographs in locating the right (p=0.353) and left (p=0.985) MF was comparable. CONCLUSIONS: The study concludes that panoramic radiographs showed comparable accuracy in effectively locating MF in comparison to CBCT. The influence of gender and anatomic location (right and left sides of MF) on MF identification with panoramic radiographs was insignificant. Digital panoramic radiographs are an effective tool in accurately identifying MF location in clinical practice.

Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images.

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

Central giant cell granuloma in the posterior region of mandible mimicking a fibro-osseous lesion and hemangioma: a case report.

BACKGROUND: A central giant cell granuloma (CGCG) is a benign, proliferative, intraosseous, and non-odontogenic lesion occurring primarily in children and young adults. On the histological level, it is characterized by numerous multinucleated giant cells scattered randomly throughout a sea of spindle-shaped mesenchymal stromal cells which are dispersed throughout the fibrovascular connective tissue stroma containing areas of haemorrhage. When it comes to radiographic features, CGCG can have an array of variations, ranging from well-defined expansile lesions to ill-defined and destructive lesions, with or without expansion. CASE PRESENTATION: This case report reviews an 11-year-old Caucasian patient with a chief complaint of slow-growing swelling involving the right posterior mandibular region. The cone beam computed tomography (CBCT) revealed an ill-defined mixed lesion mimicking both fibro-osseous lesion and hemangioma. However, microscopic examination revealed multinucleated giant cells in a fibrous stroma suggestive of central giant cell granuloma. CONCLUSION: Our intent in reporting this case is to highlight the importance of thorough clinical, radiographical and histopathological examination for accurate diagnosis and therapeutic interventions as well as to emphasize the importance of taking different possibilities into consideration when examining bony swellings in the head and neck region.

Adult Tessier cleft 30: technical case report and review of literature.

Atypical facial clefts are rare anomalies that occur due to the failure of embryonic fusion of the branchial arches. The midline mandibular cleft or Tessier 30 cleft is one such rare anomaly. Such anomalies are diagnosed at birth and treated within a few months of age by establishing soft tissue and bony continuity, followed by orthognathic treatment in adulthood. It is very rare for such clefts to go untreated until adulthood. We present one such case report and our technique of management in a patient who presented to us at 25 years of age with a lower lip and mandible cleft with ankyloglossia, which was managed with a single-staged reconstruction.

Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing.

The clinical finite element analysis (FEA) application in maxillofacial surgery for mandibular fracture is limited due to the lack of a validated FEA model. Therefore, this study aims to develop a validated FEA model for mandibular fracture treatment, by assessing non-comminuted mandibular fracture fixation. FEA models were created for mandibles with single simple symphysis, parasymphysis, and angle fractures; fixated with 2.0 mm 4-hole titanium miniplates located at three different configurations with clinically known differences in stability, namely: superior border, inferior border, and two plate combinations. The FEA models were validated with series of Synbone polymeric mandible mechanical testing (PMMT) using a mechanical test bench with an identical test set-up. The first outcome was that the current understanding of stable simple mandibular fracture fixation was reproducible in both the FEA and PMMT. Optimal fracture stability was achieved with the two plate combination, followed by superior border, and then inferior border plating. Second, the FEA and the PMMT findings were consistent and comparable (a total displacement difference of 1.13 mm). In conclusion, the FEA and the PMMT outcomes were similar, and hence suitable for simple mandibular fracture treatment analyses. The FEA model can possibly be applied for non-routine complex mandibular fracture management.

Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.