Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Peri-implant soft tissue volume changes after microsurgical envelope technique with a connective tissue graft. A 5-year retrospective case series.

AIM: The aim of the present retrospective case series was to longitudinally assess soft tissue volume changes on the vestibular aspect of implants in relation to keratinized mucosa thickness (KMT) and width (KMW) after the application of the microsurgical envelope technique combined with a connective tissue graft (CTG). MATERIALS AND METHODS: A total of 12 healthy patients received 12 dental implants placed either in the posterior maxilla or mandible. The study involved the harvesting of 12 CTGs with a minimally invasive single-incision technique, grafted to the vestibular peri-implant soft tissue utilizing the envelope technique, followed by the insertion of 12 screw-retained IPS e.max crowns. RESULTS: The healing process was uneventful across all areas, and all patients were followed up for a period of 5 years. The evaluation of KMT showed the highest decrease in the first 6 weeks after surgery (5.5 ± 0.79 to 4.59 ± 0.62 mm), then dropped slightly to 4 ± 0.85 mm, after which it maintained at 4 ± 0.36 mm until the 2-year time point. Between the second and third years after surgery, a further decrease of 3.59 ± 0.42 mm was recorded for KMT, which then remained constant until the end of the 5-year research period. The observations regarding KMW were slightly different, with the measurements demonstrating the greatest decrease in first 6 weeks (from 2.5 ± 0.42 to 1.5 ± 0.42 mm), which was maintained until the 1-year time point. Between the first and second years after surgery, the KMW increased to 2 ± 0.60 mm and remained level for the next 3 years, at 2 ± 0.85 mm. CONCLUSIONS: The current research demonstrated the advantages of using a combination of a minimally invasively harvested CTG and the microsurgical envelope technique for a duration of 5 years.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

A giant peripheral ossifying fibroma of the maxilla with extreme difficulty in clinical differentiation from malignancy: a case report and review of the literature.

BACKGROUND: Peripheral ossifying fibroma is a nonneoplastic inflammatory hyperplasia that originates in the periodontal ligament or periosteum in response to chronic mechanical irritation. Peripheral ossifying fibroma develops more commonly in young females as a solitary, slow-growing, exophytic nodular mass of the gingiva, no more than 2 cm in diameter. While various synonyms have been used to refer to peripheral ossifying fibroma, very similar names have also been applied to neoplastic diseases that are pathologically distinct from peripheral ossifying fibroma, causing considerable nomenclatural confusion. Herein, we report our experience with an unusual giant peripheral ossifying fibroma with a differential diagnostic challenge in distinguishing it from a malignancy. CASE PRESENTATION: A 68-year-old Japanese male was referred to our department with a suspected gingival malignancy presenting with an elastic hard, pedunculated, exophytic mass 60 mm in diameter in the right maxillary gingiva. In addition to computed tomography showing extensive bone destruction in the right maxillary alveolus, positron emission tomography with computed tomography revealed fluorodeoxyglucose hyperaccumulation in the gingival lesion. Although these clinical findings were highly suggestive of malignancy, repeated preoperative biopsies showed no evidence of malignancy. Since even intraoperative frozen histological examination revealed no malignancy, surgical resection was performed in the form of partial maxillectomy for benign disease, followed by thorough curettage of the surrounding granulation tissue and alveolar bone. Histologically, the excised mass consisted primarily of a fibrous component with sparse proliferation of atypical fibroblast-like cells, partly comprising ossification, leading to a final diagnosis of peripheral ossifying fibroma. No relapse was observed at the 10-month follow-up. CONCLUSIONS: The clinical presentation of giant peripheral ossifying fibromas can make the differential diagnosis from malignancy difficult. Proper diagnosis relies on recognition of the characteristic histopathology and identification of the underlying chronic mechanical stimuli, while successful treatment mandates complete excision of the lesion and optimization of oral hygiene. Complicated terminological issues associated with peripheral ossifying fibroma require appropriate interpretation and sufficient awareness of the disease names to avoid diagnostic confusion and provide optimal management.

The impact of maxillary dimensions on determining surgical approach of fungal ball in the maxillary sinus.

Endoscopic middle meatal antrostomy (MMA) is commonly used for maxillary sinus (MS) fungal ball removal. For challenging cases involving anterior or inferior recess, an additional inferior meatal approach (IMA) might be needed. We analyzed the differences in MS dimensions on CT scans according to the surgical approach to suggest preoperative variables that could facilitate an additional IMA. CT scans of 281 adult patients who underwent ESS for the MS fungal ball (139 MMA, 62 MMA & IMA) were evaluated for comparative analysis of 8 MS measurements based on the surgical approach. Complete removal was achieved in all cases. Age and sex didn't differ significantly (p > 0.05). The maximum distances between the anterior-posterior walls, the inferior ostium border to the lateral recess, and the ostium to the inferior wall of the MS were statistically greater in the MMA & IMA group compared to the MMA group (p = 0.003, p = 0.005, and p = 0.010, respectively), especially among females. This study underscores the clinical importance of specific measurements-anterior to posterior wall, medial wall to lateral recess, and ostium to inferior wall of the maxillary sinus-for guiding optimal surgical approaches in MS lesions.

Patient-reported outcomes during accelerating the en-masse retraction of the upper anterior teeth using low-intensity electrical stimulation: a randomized controlled trial.

BACKGROUND: Low-intensity electrical stimulation (LIES) is considered a relatively recent technology that has received little attention in orthodontics as a method of acceleration. This study aimed to evaluate patient-reported outcome measures when LIES is used to accelerate the en-masse retraction of the upper anterior teeth. MATERIALS AND METHODS: The sample consisted of 40 patients (8 males, 32 females; mean age 21.1 ± 2.3 years), with Class II division I malocclusion who required extraction of the first premolars to retract upper anterior teeth. They were randomly assigned to the LIES group (n = 20) and the conventional en-masse retraction group (CER; n = 20). Patient responses regarding pain, discomfort, burning sensation, swelling, chewing difficulty, speech difficulty, and painkillers' consumption were recorded at these nine assessment times: 24 h (T1), 3 days (T2), and 7 days (T3) after force application, then in the second month after 24 h (T4), 3 days (T5), and 7 days (T6) of force re-activation, and finally after 24 h (T7), 3 days (T8), and 7 days (T9) of force re-activation in the third month. RESULTS: The mean values of pain perception were smaller in the LIES group than those in the CER group at all assessment times with no statistically significant differences between the two groups except during the second and third months (T5, T6, T8, and T9; P < 0.005). However, discomfort mean values were greater in the LIES group with significant differences compared to CER group during the first week of the follow-up only (T1, T2, and T3; P < 0.005). Burning sensation levels were very mild in the LIES group, with significant differences between the two groups at T1 and T2 only (P < 0.001). Speech difficulty was significantly greater in the LIES group compared to CER group at all studied times (P < 0.001). High levels of satisfaction and acceptance were reported in both groups, without any significant difference. CONCLUSION: Both the LIES-based acceleration of en-masse retraction of upper anterior teeth and the conventional retraction were accompanied by mild to moderate pain, discomfort, and chewing difficulty on the first day of retraction. These sensations gradually decreased and almost disappeared over a week after force application or re-activation. TRIAL REGISTRATION: ClinicalTrials.gov, ClinicalTrials.gov, NCT05920525. Registered 17 June 2023 - retrospectively registered, http://clinicaltrials.gov/study/NCT05920525?term=NCT05920525&rank=1 .

The influence of immediate occlusal loading on micro/nano-structure of peri-implant jaw bone in rats.

PURPOSE: The objective of the present study was to ascertain the effect of immediate occlusal loading after implant placement on osseointegration and the micro/nanostructure of the surrounding bone. METHODS: After extraction of a rat maxillary right second molar, an implant was placed immediately with initial fixation (2 N< ). The implants were placed to avoid occlusal loading due to mastication, and in the loaded group, a superstructure was fabricated and subjected to occlusal loading. Bone morphometry, collagen fiber anisotropy, and biological apatite (BAp) crystallite alignment were quantitatively evaluated in both groups after extraction and fixation of the jaw bone at Days 7 and 21 after surgery. RESULTS: Osseointegration was observed in both groups. Bone morphometry showed significant differences in bone volume, trabecular number, trabecular thickness and bone mineral density (BMD) at Days 21 postoperatively (P < 0.05). A significant difference was also found in the trabecular separation at Days 7 postoperatively (P < 0.05). In the evaluation of collagen fiber anisotropy, collagen fiber bundles running differently from the existing bone were observed in both groups. In terms of BAp crystallite alignment, a specific structure was observed in the reconstructed new bone after implantation, and preferential orientation of BAp crystallite alignment was observed in the longitudinal direction of the implants in the Day 21 postoperative loaded group. CONCLUSION: When sufficient initial fixation is achieved at the time of dental implant placement, then the applied masticatory load may contribute to rapidly achieving not only bone volume, but also adequate bone quality after implant placement.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Correlation of sex hormone levels with orthodontic tooth movement in the maxilla: a prospective cohort study.

BACKGROUND: Sex hormones secreted during the menstrual cycle and the application of orthodontic forces to teeth can affect the metabolism of periodontal ligaments. This study aimed to determine whether there are any differences in orthodontic tooth displacement during the menstrual cycle and when using hormonal contraceptives and whether the amount of female sex hormones influences the efficiency of tooth displacement. METHODS: A total of 120 women aged between 20 and 30 years with Angle Class II requiring transpalatal arch (TPA) to derotate teeth 16 and 26 were included in this study. The participants were divided into two groups: group A, which included women with regular menstruation, and control group B, which included women taking monophasic combined oral contraceptives. Group A was divided into subgroups according to the moment of TPA activation: menstruation (A1), ovulation phase (A2), and luteal phase (A3) (examination I). On intraoral scans, measurement points were marked on the proximal mesial cusps of teeth 16 and 26, and the intermolar distance (M1) was determined. The change in the position of the measurement points 6 weeks after activation (examination II) made it possible to determine the derotating extent of teeth 16 (O16) and 26 (O26) and the widening of the intermolar distance (M2-M1). In examinations I and II, tooth mobility in the alveoli was assessed using Periotest based on the periotest values (PTV) PTV1 and PTV2, respectively. RESULTS: A significant difference in all parameters was observed among groups A1, A2, and A3 (P < 0.001). Group A3 showed the highest values of parameters O16, O26, and M2-M1, and group A2 showed the lowest values, which did not differ from the control group (P = 0.64). PTV2 and PTV1 were the highest in group A3 and the lowest in groups A1 and B. Intergroup differences were statistically significant (P < 0.001). CONCLUSIONS: With the quantification of changes in tooth mobility in the alveoli during the menstrual cycle in women undergoing orthodontic treatment, it was possible to determine that female sex hormones affect the effectiveness of orthodontic treatment, and the optimal moment for TPA activation is the luteal phase of the menstrual cycle.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Predictability of tooth rotations in patients treated with clear aligners.

Clear aligners are employed daily for the treatment of several malocclusions. Previous clinical studies indicated low accuracy for the correction of tooth rotations. The aim of this study was to evaluate the predictability of tooth rotations with clear aligners. The sample comprised 390 teeth (190 mandibular; 200 maxillary), measured from the virtual models of 45 participants (21 men, 24 women; mean age: 29.2 ± 6.6 years old). For each patient, pre-treatment (T0) digital dental models (STL files), virtual plan (T1) and post-treatment digital dental models (T2) of both the mandibular and maxillary arches were imported onto Geomagic Control X, a 3D metrology software which allows angular measurements. Rotations were calculated by defining reproducible vectors for all teeth in each STL file and superimposing both T0 with T1 to determine the prescribed rotation, and T0 with T2 to determine the achieved rotation. Prescribed and achieved rotations were compared to assess movement's accuracy. The Wilcoxon signed-rank test and paired t-test were used to assess differences between the prescribed and achieved movements (P < 0.05). The overall predictability of rotational movement was 78.6% for the mandibular arch and 75.0% for the maxillary arch. Second molar accuracy was the lowest in both arches. Clear aligners were not able to achieve 100% of the planned movements.

Feasibility study of a novel digital template-guided flapless extraction for maxillary palatal impacted teeth.

OBJECTIVE: With the increasing maturity of 3D printing technology, the application of digital guide template in the extraction of impacted teeth has become more sophisticated. However, for maxillary palatal deeply impacted teeth, there still exist significant clinical challenges. This experiment introduces a novel digital guide template and innovatively employs a flapless technique to explore a minimally invasive approach for the extraction of palatal deeply impacted teeth. METHODS: This experiment included 40 patients diagnosed with palatal completely impacted teeth, randomly divided into an experimental group and a control group. The experimental group used the new digital guide template for flapless extraction, while the control group employed the traditional freehand flap technique. RESULTS: The experimental group can significantly reduce the localization time of palatally impacted teeth (P < 0.001), with total surgery times of 18.15 ± 4.88 min and 22.00 ± 7.71 min for the experimental and control groups, respectively (P = 0.067). Although there were no significant statistical differences between the two groups in terms of intraoperative bleeding, adjacent tooth damage, infection, or damage to nearby important anatomical structures, the experimental group showed significant improvements in postoperative pain (P < 0.05), swelling (P < 0.001), and patient satisfaction (P < 0.001) compared to the control group. CONCLUSION: Compared to traditional freehand flap surgery, flapless extraction of palatally impacted teeth guided by digital templates significantly reduces the localization time of impacted teeth and demonstrates notable advantages in some postoperative complications. Future studies with larger sample sizes are needed to substantiate the feasibility of this technique.

Alveolar bone retention following treatment of dilacerated labial inversely impacted maxillary central incisors-a retrospective study.

The root of late-dental-age labial inversely impacted maxillary central incisors (LIIMCIs) typically develops to severe dilacerated morphology. Therefore, reliable posttreatment periodontal estimates of orthodontic treatment prognosis would be critical to the treatment value of impacted incisors. This study aims to analyze further changes in dimensions of the alveolar bone following the closed-eruption treatment of late-dental-age dilacerated LIIMCIs. Cone beam computed tomography (CBCT) scanning data of 16 patients with unilateral dilacerated late-dental-age LIIMCIs were collected, including the pretreatment (T1) and at the 2.23 ± 0.78 years follow-up stage (T2) respectively. Patients underwent closed-eruption treatments to bring the impacted incisor into the dental arch. Dolphin imaging software was used to measure alveolar bone height labially, palatally, and proximally to the site at T1 and T2, as well as alveolar bone thicknesses at 0, 2, 4, 6 and 8 mm below the initial measurement plane (IMP). The alveolar bone heights on the impacted and contralateral sides increased from T1 to T2 (p < 0.05). Alveolar bone growth on both sides had no significant difference. In T2, the mean values of labial and distal alveolar heights on the contralateral sides were greater than on the impacted sides (p < 0.05). The mean values of total alveolar bone thicknesses on the impacted sides in T1 were significantly smaller than those on the contralateral sides in IMP-0, 2, 4, 6, 8 (p < 0.05). The total thicknesses on the impacted sides in T2 increased and were significantly greater than on the contralateral sides (p < 0.05), except for the thickness in IMP-0. The closed-eruption treatment of dilacerated late-dental-age LIIMCIs results in no significant changes to alveolar bone height, except on the labial and distal sides, with increased alveolar bone thickness, suggesting that this approach may be viable first choice therapy for non-extraction orthodontic cases.

Micro-computed tomography (micro-CT) evaluation of root canal morphology in immature maxillary third molars.

The endodontic treatment of immature permanent teeth with necrotic pulp is a significant clinical challenge. The success of regenerative endodontic procedure is highly dependent on disinfection of the root canal and an accurate anatomical knowledge of the root canal. The aim of this study was to use micro-computed tomography (micro-CT) analysis to investigate the configuration of root canals in the upper permanent third maxillary molars with incomplete root development in their coronal, apical and middle third portions. Thirty immature third permanent maxillary molars were scanned using a micro-CT system. Then, we measured the diameters and areas of the root canal in the coronal, middle and apical third of the roots. The ratio between the long and short diameter of each root canal was then calculated and the canals were divided into several groups: round, oval, long oval, flat and irregular. The round configuration was not observed in the distobuccal and mesiobuccal roots in any of their anatomical regions. Oval and long oval canals predominated in the distobuccal root. The greatest variations were observed in the mesiobuccal root, with the ribbon-shaped canal predominating in the middle region and an irregular shape in the apical region. In the coronal region of the palatal canal, the round configuration predominated; in the middle third, we observed an almost equivalent distribution between round and oval configurations; apically, the oval shape predominated. In conclusion, we observed significant complexity and variation in the morphology and configuration of root canals in immature permanent molars, thus generating additional obstacles for the success of regenerative endodontics.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level.

AIM: The objective of this study was to assess marginal bone level around single implants inserted in fresh extraction sockets in the anterior maxillary region and instantly restored with computer-aided design/computer-aided manufacturing customized temporary crowns cemented on the final abutment. MATERIALS AND METHODS: A total of 20 patients (15 females and 5 males, with a mean age of 30 years), where 20 were placed in fresh extraction sockets. After raising a full-thickness flap, atraumatic extraction was performed the implant site was prepared and fixtures were stabilized on the palatal bone wall. The implant location was immediately transmitted to the prepared master model using the pick-up impression coping seated in the surgical guide template. Prefabricated abutments were used as the final abutment on the master model, scanned and the crown was planned using computer-aided manufacturing customized software. Later on 8th weeks, abutments were torqued as per the manufacturer's recommendation, and the final crowns were cemented. Using personalized intraoral radiographs marginal bone level was evaluated mesially and distally to the implant shoulder as a reference at implant placement, 8 weeks, 1, 3, 5, and 10 years after loading. RESULTS: Wholly implants were osteo-integrated positively after 10 years of practical loading, but only 18 were available for clinical and radiological follow-up, and 2 patients with two implants were excluded from the study due to relocation abroad without any implant failure. The average marginal bone loss (MBL) in the current report was 0.16 ± 0.167 mm at crown cementation, 0.275 ± 0.171 mm after 1 year, 0.265 ± 0.171 mm after 3 years, 0.213 ± 0.185 mm after 5 years, and 0.217 ± 0.194 mm at 10 years. CONCLUSION: The strategy of inserting and not removing the final abutment at the time of implant placement facilitates the establishment of adequate attachment of both soft and hard tissues to the abutment surface, ensuring uninterrupted organization of tissue architecture and offers advantages in helping maintain soft tissue maturation and preventing marginal bone level. CLINICAL SIGNIFICANCE: Immediately loaded implants in freshly extracted sockets lead to a significant reduction in marginal ridge resorption. The use of a temporary crown on a prefabricated abutment, exclusive of successive abutment manipulation, proved effective in preserving the primarily founding blood clot and served as a prototype for shaping the soft tissue around the previously wounded gum. How to cite this article: Berberi A, El Zoghbi A, Aad G, et al. Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level. J Contemp Dent Pract 2024;25(3):213-220.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.