Evaluation of nasal septal deviation and maxillary bone and nasal airway dimensions and volumes using cone-beam computed tomography in patients with unilateral palatal canine displacement: a retrospective study.

OBJECTIVES: To detect any association between palatally displaced canine (PDC) and nasal septal deviation (NSD), palatal bone thickness and volume, and nasal airway dimensions and volume. MATERIALS AND METHODS: A total of 92 patients were included and subdivided into two groups: group 1, unilateral PDCs (44 patients), and group 2, normally erupted canines (NDCs) (48 subjects). The following variables were measured using cone-beam computed tomography: presence and type of NSD, nasal width, inferior conchae, hard palate and nasal septum thickness, maxillary bone and nasal airway volumes. RESULTS: NSD was detected in 77% and 50% of PDC and NDC subjects, respectively. Within the PDC subjects, significant differences between the displaced and nondisplaced sides were detected. Palate thickness was increased in the canine region and reduced in the molar region. Compared with the control group, PDC subjects had reduced palate thickness and lower nasal airway volume. Two predictors were significant for predicting the odds of PDC occurrence: NSD and maxillary bone volume. CONCLUSIONS: NSD is more frequent in PDC subjects. PDC subjects have reduced palate thickness and decreased nasal airway volume. In the presence of NSD, the odds of developing PDC increase by 3.35 times, and for each one-unit increase in the maxillary bone volume, the odds of developing PDC decrease by 20%.

Comparison of the Effects of Different Palatal Morphology on Maxillary Expansion via RME and MSE: A Finite Element Analysis.

OBJECTIVES: This study aims to compare and analyze the biomechanical effect and the displacement trend of RME and MSE on the maxillofacial complex under different palatal shapes by using finite element analysis. METHODS: The three-dimensional model of maxillofacial complex was obtained from a computed tomography image of a person with a normal palate. Then, we modified the shape of the palate to obtain the model with a high palate. Additionally, two expander devices were considered. MSE and RME were created and four models were made: Model 1: Normal-palate craniomaxillofacial complex with RME expander; Model 2: Normal-palate craniomaxillofacial complex with MSE expander; Model 3: High-palate craniomaxillofacial complex with RME expander; Model 4: High-palate craniomaxillofacial complex with MSE expander. Then, lateral forced displacement was applied and the analysis results were obtained. RESULTS: The lateral displacement of the palatal suture of Model 3 is greater than that of Model 1, and the maxilla has more rotation. The crown/root ratio of Model 1 is significantly greater than that of the other three groups. Compared with Model 1, Model 3 has greater stress concentration in the superstructure of the craniomaxillofacial complex. Both of them have greater stress in the anchorage area than Model 2 and Model 4. CONCLUSION: Different shapes of the palate interfere with the effects of RME and MSE, and its influence on the stress distribution and displacement of the craniomaxillary complex when using RME is greater than MSE. The lateral displacement of the palatal suture of MSE is significantly larger than that of RME. It is more prone to tipping movement of the anchor teeth using RME under normal palate, and MSE may manage the vertical control better due to the smaller crown/root ratio than RME and intrusive movement of molars.

Pleomorphic adenoma of hard palate: Review of updated literature and "case report".

RATIONAL: Pleomorphic adenoma (PA) is a rare benign tumor mainly affecting the major salivary glands, known for its diverse histological appearances that can mimic malignancies. When it occurs in the hard palate it present diagnostic and management challenges compared to other sites due to the anatomical location and potential proximity to critical structures. This case reports a rare presentation PA starting as an ulcer, alongside a review of rare cases of PA reported in last 5 years. We aim to highlight clinical challenges and emphasize the need for awareness in diagnosis of this diverse entity amongst the clinicians before reaching a definitive conclusion. PATIENT CONCERNS: A 41-year-old female reported an asymptomatic large swelling on the right side of the posterior palatal region. Clinical diagnosis revealed a firm, rubbery, and non-tender swelling of approximately 4 cm × 4 cm diameter. A triangular incisional biopsy was performed to confirm the diagnosis. DIAGNOSIS: The histopathological evaluation confirmed the presence of a PA with a well-encapsulated and compressed salivary gland. A wide surgical dissection was made to remove the entire encapsulated tumor mass, including the mucoperiosteum and eroded bone of the palate. The borderline of the tumor was carefully identified in the surrounding healthy tissue. The hemostasis was obtained using a simple interrupted suture. LESSON: The diagnosis of PA is difficult as it usually involves extensive squamous and mucous metaplasia, confusing it with malignant disorders. Histopathological and clinical examinations are important for differentiating this lesion from other tumors. Complete surgical excision is reported as the first line of treatment.

Orofacial Actinomycosis Eroding Through Hard Palate: A Case Report.

INTRODUCTION: Actinomycosis is a rare, chronic, progressive bacterial infection caused by Actinomyces species with a reported incidence of 1 in 300 000. Actinomycosis has variable presentations and is commonly mistaken for malignancy and other infections, leading to delays in diagnosis and appropriate treatment. Actinomyces is a commensal bacteria found in the mouth, gut, and genitourinary tract. Actinomycosis tends to take advantage of anatomical defects for contiguous spread and can cause fistulas, sinus tracts, abscesses, and intrauterine device-associated infections. CASE PRESENTATION: A 78-year-old White male with known dental caries came to a primary care clinic 2 days after noticing a painless, nonbleeding mass eroding from his hard palate. After a tissue biopsy of the mass showed a diagnosis of actinomycosis and advanced imaging showed no intracranial involvement, he was treated with a 6-month course of antibiotics, including oral amoxicillin, oral amoxicillin-clavulanate, and intravenous ertapenem. DISCUSSION: There are several case reports of actinomycosis with variable presentations, such as cutaneous nodules and sinus tracts. These cases frequently are associated with dental infections and procedures, trauma, oral surgery, or prior head and neck radiation. The condition is often mistaken for other infections or malignancy, which can delay appropriate treatment and increase the risk of complications. CONCLUSIONS: Actinomycosis is a rare bacterial infection with variable presentations occurring throughout the body. This patient responded well to a prolonged course of intravenous and oral antibiotics and had complete healing of his hard palate defect. Actinomycosis is frequently misdiagnosed, leading to delays in appropriate treatment.

Gender-Specific Variations in Greater Palatine Foramen Anatomy: Insights from CBCT Scans in the North Cyprus Population.

BACKGROUND The greater palatine foramen (GPF) is anatomically located distal to the third maxillary molar tooth, midway between the midline of the palate and the dental arch. The GPF contains the major palatine artery, vein, and nerve, traversing the palatine sulcus. This study aimed to evaluate the anatomical position of the GPF in 93 women and 67 men at a single center in Cyprus using cone beam computed tomography (CBCT). MATERIAL AND METHODS A retrospective analysis was conducted on 160 CBCT scans. Measurements of the GPF's horizontal and vertical diameters, distances from GPF to the incisive foramen, posterior nasal spine, anterior nasal spine, and midaxillary suture, and positional relationships to molars were recorded. Statistical analyses compared these measurements between males and females. RESULTS The study included 93 females and 67 males with an average age of 46.6 (±11.6) years. Significant sex differences were observed in most GPF measurements, with males showing larger dimensions such as the anterior nasal spine, posterior nasal spine, mid-maxillary suture, and incisive foramen to the GPF. The GPF was predominantly located in the third molar region (96.25% on the right, 96.9% on the left). The left GPF showed a significantly larger horizontal diameter than the right (P<0.05). CONCLUSIONS There was a significant difference in the average distances from the anterior nasal spine, posterior nasal spine, mid-maxillary suture, and incisive foramen to the GPF, as well as in the size of the GPF, between males and females. Recognizing these variations enhances clinical planning and reduces the risk of complications.

Manejo cirúrgico de ferimento auto-infligido por arma de fogo em região maxilofacial / Surgical management of self-inflicted injury by gun in the maxillofacial region

INTRODUÇÃO: O manejo dos pacientes vítimas de PAF possui vertentes divergentes a respeito do tratamento cirúrgico, que pode ser realizado de forma imedata ou tardia. Em lesões auto-infligidas, a distância entre a arma e a região acometida é menor, causando consequências estéticas e funcionais mais devastadoras. Aliado ao fato desse tipo de trauma criar uma ferida suja devido à comunicação com a cavidade oral e seios paranasais, o manejo das lesões representam um desafio mesmo à cirurgiões experientes. OBJETIVO: Estre trabalho relata o manejo cirúrgico de uma ferida auto-infligida por arma de fogo que resultou em avulsão dos tecidos moles na região maxilofacial. DESCRIÇÃO DO CASO: Paciente do sexo masculino, 35 anos, vítima de projétil de arma de fogo auto-infligido em região maxilofacial, cursando com extenso ferimento em região de língua e mento. Clinicamente, o paciente não apresentava sinais de fratura em ossos da face. Ambos os ferimentos apresentavam secreção purulenta e o paciente manifestava disfonia devido a grande destruição tecidual. CONSIDERAÇÕES FINAIS: O tratamento de ferimentos por arma de fogo não só é um grande desafio para o cirurgião, como para toda a equipe multidisciplinar requerida para tais casos, visto que não há protocolos bem definidos para o tratamento dessas lesões(AU)

INTRODUCTION: The management of patients who are victims of FAP has divergent aspects regarding surgical treatment, which can be performed immediately or late. In self-inflicted injuries, the distance between the weapon and the affected region is smaller, causing more devastating aesthetic and functional consequences. Allied to the fact that this type of trauma creates a dirty wound due to the communication with the oral cavity and paranasal sinuses, the management of injuries represents a challenge even for experienced surgeons. OBJECTIVE: This paper reports the surgical management of a self-inflicted gunshot wound that resulted in soft tissue avulsion in the maxillofacial region. CASE DESCRIPTION: Male patient, 35 years old, victim of a self-inflicted firearm projectile in the maxillofacial region, coursing with extensive injury in the region of the tongue and chin. Clinically, the patient did not show signs of facial bone fractures. Both wounds had purulent secretion and the patient had dysphonia due to extensive tissue destruction. FINAL CONSIDERATIONS: The treatment of gunshot wounds is not only a great challenge for the surgeon, but also for the entire multidisciplinary team required for such cases, since there are no well-defined protocols for the treatment of these injuries(AU)

Two cases of imatinib induced oral pigmentation affecting the palate.

BACKGROUND: Medication-related oral pigmentation is a unique yet benign finding in the dental setting. As new antineoplastic agents emerge, it is likely that this documented manifestation will continue to grow. CASE DESCRIPTION: Here, we describe two case presentations of imatinib-related hyperpigmentation of the palate. Both patients had been on imatinib, an antineoplastic agent for 10-14 years and presented with asymptomatic diffuse blue-black discoloration of the hard palate. Both cases demonstrated biopsy-proven pigment changes localized to the superficial connective tissue with evidence of melanin and hemosiderin deposits. Of note, this is a benign finding that does not require intervention. CONCLUSION: These two cases illustrate intraoral findings associated with imatinib. Increased awareness of this side effect will enable clinicians to appropriately council patients regarding the benign nature of this process.

Microsecretory adenocarcinoma of the hard palate: a case report and literature review.

Microsecretory adenocarcinoma (MSA) is a new type of salivary gland neoplasm identified in the 2022 World Health Organization Classification of Head and Neck Tumour (Skalova et al., Head Neck Pathol 16:40-53, 2022) and is characterized by a unique set of histomorphologic and immunohistochemical features and a recurrent MEF2C::SS18 fusion. MSA was initially misdiagnosed as another salivary gland tumour due to its similar morphology; until recently, only fewer than 50 cases were reported. We present a case of MSA of the hard palate with diverse architectural growth patterns, bland cytological features, abundant basophilic intraluminal secretions and fibromyxoid stroma. The tumour cells were positive for the SOX10, S100, and p63 protein and negative for the p40 protein according to immunohistochemistry. SS18 gene rearrangement was demonstrated via break-apart fluorescence in situ hybridization. We also provided a comprehensive literature review and integrated the clinicopathological features, immunophenotype, and molecular alterations of the disease. A comprehensive understanding of MSA enables us to accurately distinguish and categorize MSA from other salivary gland tumours with analogous morphologies.

Oral Mucosa and Saliva Alterations Related to Vape.

OBJECTIVES: Electronic nicotine delivery systems (e-cigarette, pod, and vape) are currently among the tobacco consumption of adolescents and young adults. The aim is to show oral mucosa and saliva alterations related to vape. MATERIAL AND METHODS: A vape-user patient, presenting a white plaque in the posterior region of the hard palate, underwent clinical examination, sialometry, pH evaluation, and excisional biopsy of the white lesion. Molecular changes in saliva and vape liquid were analyzed by vibrational spectroscopy. RESULTS: The histopathological analyses showed hyperparakeratosis without dysplasia. Formaldehyde, ketones, and aromatic hydrocarbon species were identified in e-cig liquid by the FTIR. CONCLUSIONS: The use of vape may be related to the development of hyperkeratotic lesions in the oral mucosa as well as significantly modify the patient's salivary patterns as the vape liquid presents carcinogenic and cytotoxic components in its composition.

Maxillomandibular Fusion Along with Fusion of Dorsal Surface of the Tongue to the Hard Palate-A Case Report.

RATIONALE: This case report presents a rare combination of congenital anomalies in an otherwise healthy male infant born at 36 weeks. The infant was diagnosed with congenital maxillomandibular synechia, ectrodactyly, and ankyloglossia superior syndrome (ASS). PATIENT CONCERNS: Inability to open the mouth completely, feeding challenges, and a cleft palate. The infant was stabilized through successful positive pressure ventilation via a face mask at birth and enteral feeding was initiated via a feeding gastrostomy. EXAMINATION: Diagnostic tests revealed a midline palatal cleft, hypoplastic jaws, persistent metopic suture, and a bony fusion at the midline. TREATMENT: Sectioning of the bony spur along the midline and achieving a mouth opening of 2 cm post-manipulation. The patient is under follow-up, with future treatment plans including cleft palate correction at 12 months and potential frontomandibular and lower jaw advancement depending on growth trajectories. TAKEAWAY LESSONS: This case underscores the complexity of managing multiple congenital anomalies and the need for individualized treatment plans.

Extraskeletal ewing's sarcoma on hard palate biltaerally: A rare case report.

Ewing Sarcoma belongs to the category of undifferentiated blue small round cell tumour and its origin has been traced to be that from inside of the bone, but can also arise in soft tissues (extraosseous form). These lesions belong to the category of round cell tumours, which includes a varied range of tumours. This category, although found in other extremities and thoracic regions, head and neck region have been reported to have less number of tumours, in addition to that the soft tissue counterparts are even scarcely reported. Thereby, this case reports represents a soft tissue counterpart of Ewings Sarcoma on the hard palate, which not only extends unilaterally but extends bilaterally.

Use of a haired angularis oris axial pattern flap in a dog to correct a large oronasal fistula secondary to resection of a hard palate multilobular osteochondrosarcoma.

A 6-year-old neutered male mixed-breed dog underwent curative-intent surgical resection of a hard palatal multilobular osteochondrosarcoma and closure of the defect using bilateral buccal mucosal flaps. However, failure of the flaps resulted in a massive hard palatal defect that was subsequently repaired using a haired skin angularis oris axial pattern flap. This report describes the clinical outcome using this surgical approach and novel complications encountered. Key clinical message: The haired skin angularis oris axial pattern flap appears to be a suitable and robust option for reconstruction of large palatal defects.

Utilisation d'un lambeau cutanée poilus avec rotation axiale au niveau de l'artère angularis oris chez un chien pour corriger une fistule oronasale volumineuse secondaire à la résection d'un ostéochondrosarcome multilobulaire du palais dur. Un chien croisé mâle castré de 6 ans a subi une résection chirurgicale à visée curative d'un ostéochondrosarcome multilobulaire du palais dur et une fermeture de l'anomalie par des lambeaux de la muqueuse buccale. Cependant, la défaillance des lambeaux a entraîné un défaut important du palais dur qui a ensuite été réparé à l'aide d'un lambeau de peau avec poils avec rotation axiale au niveau de l'artère angularis oris. Ce rapport décrit les résultats cliniques de cette approche chirurgicale et les nouvelles complications rencontrées.Message clinique clé :L'utilisation d'un lambeau de peau avec poils avec rotation axiale au niveau de l'artère angularis oris semble être une option appropriée et robuste pour la reconstruction des défauts importants du palais.(Traduit par Dr Serge Messier).

Morphological evaluation of the nasopalatine canal using cone beam computed tomography and its clinical implications for orthodontic miniscrew insertion.

BACKGROUND: The morphology of the nasopalatine canal is crucial in the planning of prosthetic restorations in the anterior region of the maxilla, as well as in the placement of orthodontic mini-implants. OBJECTIVES: The aim of this study was to assess the morphology of the nasopalatine canal using cone beam computed tomography (CBCT) scans of patients from the University Dental Clinic in Krakow, Poland, to define the position of the canal in relation to common sites of palatal median microimplant placement, and to investigate potential correlations between the anatomy of the canal and age and gender of the patients. MATERIAL AND METHODS: A total of 120 CBCT images were used to assess the anatomy of the nasopalatine canal in 3 planes of space. The bone thickness anterior to the nasopalatine canal and the distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position were also measured. RESULTS: The most frequently observed canal type in the coronal plane was the Y-shaped canal, which was present in 60.8% of patients. The nasopalatine canal was classified as cone-shaped in 31.7% of the scans, cylindrical in 28.3%, hourglass-shaped in 27.5%, and banana-shaped in 12.5%. The mean length of the nasopalatine canal was 11.58 mm. The mean width of the canal was 2.89 mm at the nasal fossa level, 1.94 mm in the middle, and 5.09 mm at the palatal level. The mean bone thickness anterior to the nasopalatine canal was 9.07 mm at the level of the nasal opening, 6.84 mm at the level of the oral opening, and 7.32 mm in the middle. The mean distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position varied from 0 to 11.94 mm, with a mean of 2.49 mm. CONCLUSIONS: Given the variety of nasopalatine canal forms and dimensions, detailed analysis of CBCT scans is essential prior to the placement of implants and microimplants.

How palatal vault morphology and screw length influence the accuracy of dynamic computer-guided orthodontic miniscrew insertion. A prospective clinical study.

OBJECTIVES: The aim of this study was to evaluate the influence of palatal vault morphology and screw length on the accuracy of miniscrew insertion in dynamic computer-assisted surgery (d-CAS). METHODS: Twenty-four subjects were allocated into three groups, according to their palatal vault morphology (Group A: medium; Group B: steep/high; Group C: low/flat) and the length of miniscrew used. For each subject, two miniscrews were inserted using a dynamic navigation system. To assess the accuracy of insertion, a postoperative CBCT was performed, and the pre- and post-operative scans were superimposed. Five variables were evaluated: Entry-3D, Entry-2D, Apex-3D, Apex-vertical and angular deviation. Descriptive statistics, Shapiro-wilk, Kruskal-Wallis and Dunn's tests were used for the statistical analysis. The level of significance was P ≤ 0.05. RESULTS: The mean angular deviation values revealed strong discrepancies amongst the groups (Group A:7.11°±5.70°; Group B:13.30°±7.76°; Group C:4.92°±3.15°) and significant differences were found regarding the Apex-3D (P = 0.036) and angular deviations (P = 0.008). A Dunn's test revealed differences in angular deviation between the medium and high/steep palate group (P = 0.004), and between low/flat and high/steep palate group (P = 0.01) but did not confirm any significant difference in the Apex-3D parameter (Group A-B P = 0.10; Group B-C, P = 0.053; Group A-C, P = 1.00). No significant differences were found regarding the length of the miniscrews. CONCLUSIONS: Palatal vault morphology is a factor that influences the accuracy of miniscrew insertion in d-CAS. In subjects with steep and high palatal vaults, insertion accuracy is lower when considering the angular deviation value. Miniscrew length does not influence accuracy. CLINICAL SIGNIFICANCE: Although computer-guided surgery assists the clinician in preventing damage to nearby anatomical structures, individual anatomical variability is a crucial variable. In subjects with a high/steep palate, greater attention should be paid during the planning phase in order to allow for a wide margin from adjacent anatomical structures to achieve better outcomes.

Nasopalatine canal cyst, a diagnostic twist.

We present a case of nasopalatine duct cyst in a 35-yearold female. The cyst was diagnosed based on the presence of only one clinical symptom and no obvious clinical signs, which is a relatively rare occurrence. However, the radiographic and histological presentation of this lesion was typical of a nasopalatine duct cyst. Therefore, this case report aims to highlight the variable presentations of the nasopalatine cyst, which is often misdiagnosed and treated as an endodontic infection.

Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Three-dimensional printed personalised digital guide plate for greater palatine block in trigeminal neuralgia.

The nerve block is a safe and effective method to theat trigeminal neuralgia (TN). In terms of the V2 trigeminal neuralgia, the most difficult procedure in nerve block is accurate and fast greater palatine foramen (GPF) insertion. In this study, we developed a new technique using a personalised digital tooth-supported guide plate to increase insertion accuracy and success rates and reduce the pain of patients during injection. A total of 18 patients with TN (11 female and 7 male) were enrolled and treated between September 2020 and June 2022. Before injection, the guide plate was designed via Mimics three-dimensional (3D) reconstruction technology and printed via 3D printer. Then, all patients underwent maxillary nerve block with a guide plate for each injection. In this study, placement of all guide plates was completed within one minute and all punctures were successful the first time. The depth of the injection needle was over 2.5 cm in all cases and the guide plate was stability-supported by the maxillary teeth. The various pain scores had an obvious improvement. No patients presented symptoms of local anaesthetic toxicity or onset of new neurological sequelae. Using this new technology, we can significantly reduce the difficulty of GPF insertion and decrease patient pain during injection. The enhanced success rate of nerve block can achieve better therapeutic effect. For surgeons, personalised digital tooth-supported guide plates make the operation easier, especially for novice surgeons.

Dehiscence and Fistula Formation Following Anterior Palatal Reconstruction With Vomer Flap.

BACKGROUND AND PURPOSE: Anterior palatal reconstruction using vomer flaps has been described during primary cleft lip repair. In this procedure, the mucoperiosteal tissue of the vomer is elevated to reconstruct the nasal mucosa overlying the cleft of the hard palate. Here the authors, evaluate the efficacy of a technique in which a superiorly based vomer flap is sutured to the lateral nasal mucosa. The authors assess vomer flap dehiscence rates and compare the likelihood of fistula development in this cohort to patients who underwent palatoplasty without vomer flap reconstruction. METHODS: A retrospective chart review was conducted of all palatoplasties performed by the senior author at an academic institution during a 7-year period. Medical records were reviewed for demographic variables, operative characteristics, and postoperative complications up to 1 year following surgery. Logistic regression analysis was conducted to assess the effects of vomer flap reconstruction on fistula formation, adjusting for age and sex. RESULTS: Fifty-eight (N=58) patients met the inclusion criteria. Of these, 38 patients (control group) underwent cleft palate reconstruction without previous vomer flap placement. The remaining 20 patients underwent cleft lip repair with vomer flap reconstruction before palatoplasty (vomer flap group). When bilateral cases were counted independently, 25 total vomer flap reconstructions were performed. Seventeen of these 25 vomer flap reconstructions (68%) were completely dehisced by the time of cleft palate repair. In the vomer flap group, 3 of the 20 patients (15%) developed fistulas in the anterior hard palate following the subsequent palatoplasty procedure. In the control group, only 1 of the 38 patients (2.6%) developed a fistula in the anterior hard palate. There was no significant association between cohorts and the development of anterior hard palate fistulas [odds ratio=10.88, 95% confidence interval (0.99-297.77) P =0.07], although analysis was limited by low statistical power due to the small sample size. CONCLUSIONS: In our patient population, anterior palatal reconstruction using a superiorly based vomer flap technique was associated with complete dehiscence in 68% of cases. Fistula formation in the anterior hard palate was also proportionately higher following initial vomer flap reconstruction (15% versus 2.6%). These results prompted the senior author to adjust his surgical technique to 1 in which the vomer flap overlaps the oral mucosa. While follow-up from these adjusted vomer flap reconstruction cases remains ongoing, early evidence suggests a reduced requirement for surgical revision following implementation of the modified technique.

The current overview of the devices of temporary anchorage placed on the palatal bone: CBCT study.

Temporary anchorage devices (TADs) are frequently applied to different anatomic areas with different protocols to increase skeletal effects and anchorage in orthodontic treatment planning. It has been reported in many literatures that primary stability for orthodontic TADs is significant for long-term survival rate. For this reason, different areas of the palatal region, which has many indications, have been widely used in the studies. In this evaluation where bone quality and thickness are important, density, bone thickness, and fractal dimension (FD) on cone beam computed tomography (CBCT) will provide more predictable clinical results. The aim of this study was to evaluate bone thickness, density, and FD in the palatal region of the first, and second premolars, and first molars. There was a remarkable difference (p < 0.05) between the parameters of FD, thickness and density of bone in the identified areas in the palatal region. In terms of thickness and FD, the 1st premolar region had significantly higher values than the other regions (p < 0.05). In terms of density, the values in the right 1st molar and right 1st premolar regions were significantly higher (p < 0.05). The 1st premolar region is an ideal site for placement of palatal TADs. CBCT-assisted preliminary evaluation of FD value, bone density, and thickness may increase clinical success when selecting the location of TADs to be applied to the palatal bone.