Enhancing apple postharvest protection: Efficacy of pectin coatings containing Cryptococcus laurentii against Penicillium expansum.

The aim of this work is the application of pectin coatings containing Cryptococcus laurentii as a method of biocontrol of Penicillium expansum for postharvest protection of apples. For this purpose, the yeast was incorporated into a pectin matrix, and its viability and biocontrol activity in vitro and in vivo against P. expansum was evaluated over time. In addition, the influence of the sterilization process on coating thickness was studied. Results showed that pectin coating with C. laurentii enhanced mycelial growth inhibition in vitro studies, while no significant differences were observed in disease incidence and severity reduction in vivo studies. The sterilization process reduced the viscosity of the pectin solution, resulting in coating thicknesses ranging from 0.5 to 1 µm. As a general evaluation, in vitro and in vivo, biocontrol assays were useful in demonstrating better postharvest protection of the yeast at 7 °C concerning 25 °C.

High methoxyl pectin grafted onto gallic acid by one- and two-pot redox-pair procedures.

The aim of this research was to graft gallic acid (GA) onto high methoxyl pectin (HMP) through the redox-pair of ascorbic acid (Aa) and hydrogen peroxide (H2O2) with one- and two-pot procedures. The effectiveness of the both procedures and the chemical, physical and antioxidant properties of the obtained HMP-GA were evaluated. HMP-GAone-pot (23.3 ± 0.21 mg GA Equivalent (GAE)/g) and HMP-GAtwo-pot (32.3 ± 0.52 mg GAE/g) were best obtained at H2O2/Aa molar ratio-HMP/GA weight ratio of 9.0-0.5 and 16.0-0.5, respectively. The UV-Vis and FT-IR spectra and along with their derivative and thermal gravimetric analyses, revealed differences between HMP-GAone-pot and HMP-GAtwo-pot. The latter exhibited a greater antioxidant capacity than the former in single electron transfer (ET), hydrogen atom transfer (HAT), and ET-HAT mixed assays. The chemical differences can be attributed to side reactions that may have interfered with the grafting reaction. Consequently, HMP-GA, possessing unique antioxidant and prebiotic properties, can be synthesized through redox-pair procedures.

Amiodarone chewable gels as a potential appproach for paediatric congenital cardiopathies treatment: Comparison between animal and vegetal gelling agents.

The difficulty in swallowing is a frequent problem when oral solid dosage forms (conventional tablets or capsules) are administered to paediatric population or patients with dysphagia. An interesting alternative to overcome these problems are non-conventional formulations like chewable gels, commonly known as 'gummies'. Therefore, this work addresses the design, development and characterization of gummies using gelatine and pectin, for the vehiculization of the antiarrhythmic amiodarone (AMIO). Applying a Design of Experiments (DoE) approach, four gelatine (GG1-GG4) and eight pectin formulations (PG1-PG8) were developed. Considering the obtained results for responses during DoE evaluation (i.e., volume, syneresis, hardness, and gumminess), GG3 and PG8 were selected for complete characterization. Water activity, pH, drug content, texture parameters (adhesiveness, springiness, cohesiveness, and fracturability), disintegration time, in vitro dissolution, and microbiological features were evaluated. The obtained results were within the expected values for this type of formulation. The dissolution profiles showed a 94 % - 99 % of the AMIO content released for GG3 and PG8, respectively, so they could be considered suitable as immediate release dosage forms. In conclusion, the chewable gels were successfully developed and characterised, suggesting a potential means to accomplish a final prototype for the improvement of congenital cardiopathies treatment.

Comparative analysis of pectin and prebiotics on human microbiota modulation in early life stages and adults.

The gut microbiota is essential in human health, influencing various physiological processes ranging from digestion and metabolism to immune function and mental health. Dietary fiber pectins and prebiotics have emerged as key modulators of gut microbiota composition and function, offering potential therapeutic implications for promoting gut health and preventing intestinal inflammatory diseases. In this review, we explore the modulation of gut microbiota by dietary fiber pectins and prebiotics in infants and adults. We begin with an overview of the gut microbiota composition and function in different age groups, highlighting the factors in shaping microbial communities in both age groups, especially the effect of diet. We then delve into the impact of dietary fiber pectins and prebiotics on gut microbiota composition and function, examining their effects on digestive health, intestinal barrier integrity, immune function, metabolic health, and mental health across different life stages. We further compare how aging affects the gut function and immune system, and we discuss the main health outcomes associated with dietary fiber intake and prebiotics, including the impact on digestive health, improvement in immune function, improvement in cholesterol and glucose metabolism, weight management, mental health, and prevention of diseases. Finally, we highlight the challenges and future directions for research. By advancing the understanding of gut microbiota dynamics and translating scientific insights into clinical practice, it could harness the full potential of dietary fiber pectins and prebiotics to optimize gut health, improve overall well-being across the lifespan, and increase longevity.

Sequential extraction of anthocyanins and pectin from jabuticaba (Plinia cauliflora) peel: Peel pretreatment effect and ultrasound-assisted extraction.

The jabuticaba bark is rich in anthocyanins and fibers, and its use may be of industrial interest. In the food sector, its used as an ingredient in the production of fermented products, liqueurs or enriched flours. It also has pharmaceutical and cosmetic applications. The objective was to evaluate the effect of pretreatment and fresh use of jabuticaba peels in the extraction of total phenolic compound (TPC) and total anthocyanin (TA) contents with and without ultrasound assistance and in the sequential extraction of pectin from the residue. In the TPC and TA extraction, a 3x2 factorial design was used. For conventional anthocyanin extraction (CAE), occurred in an incubator under agitation. For ultrasound-assisted anthocyanin extraction (UAE) was utilized an ultrasonic homogenizer with probe (20 kHz, 160 W). The extracts were quantified (TPC, TA, antioxidant activity and color). The residues were characterized and used for sequential pectin extraction, which was quantified and characterized. The results were subjected to analysis of variance. Fresh jabuticaba peel is a residue that can be used to sequentially extract phenolic compounds, particularly anthocyanins and pectin. The use of ultrasound (UAE) was less efficient than CAE for extracting TPC and TA or performing sequential extraction on all pretreatment peels.

Implications of cell wall immunocytochemical profiles on the structural and functional traits of root and stem galls induced by Eriosoma lanigerum on Malus domestica.

Alterations in cell wall composition imply in new structural and functional traits in gall developmental sites, even when the inducer is a sucking exophytophagous insect with strict feeding sites as the aphid associated to Malus domestica Borkh. This host plant is an economically important, fruit-bearing species, susceptible to gall induction by the sucking aphid Eriosoma lanigerum Hausmann, 1802. Herein, the immunocytochemical detection of arabinogalactan-proteins (AGPs), pectins, and hemicelluloses using monoclonal antibodies was performed in samples of non-galled roots and stems, and of root and stem galls on M. domestica. The dynamics of these cell wall components was discussed under the structural and functional traits of the galls proximal, median, and distal regions, according to the proximity of E. lanigerum colony feeding site. In the proximal region, the epitopes of AGPs and homogalacturonans (HGs) are related to cell growth and divisions, which result in the overproduction of parenchyma cells both in root and stem galls. In the proximal and median regions, the co-occurrence of HGs and arabinans in the cell walls of parenchyma and secondary tissues favors the nutrient flow and water-holding capacity, while the xylogalacturonans and hemicelluloses may function as additional carbohydrate resources to E. lanigerum. The immunocytochemical profile of the cell walls support the feeding activity of E. lanigerum mainly in the gall proximal region. The similarity of the cell wall components of the gall distal region and the non-galled portions, both in roots and stems, relates to the decrease of the cecidogenetic field the more distant the E. lanigerum colony is.

Encapsulation of lactic acid bacteria in W1/O/W2 emulsions stabilized by mucilage:pectin complexes.

Opuntia silvestri mucilage obtained from dried stems was explored as an emulsifier to prepare double emulsions aiming to encapsulate Lactiplantibacillus plantarum CIDCA 83114. W1/O/W2 emulsions were prepared using a two-step emulsification method. The aqueous phase (W1) consisted of L. plantarum CIDCA 83114, and the oil phase (O) of sunflower oil. The second emulsion was prepared by mixing the internal W1/O emulsion with the W2 phase, consisting of 4 % polysaccharides, formulated with different mucilage:(citric)pectin ratios. Their stability was assessed after preparation (day 0) and during storage at 4 °C (28 days). Determinations included creaming index, color, particle size, viscosity, turbidity, and bacterial viability, along with exposure to simulated gastrointestinal conditions. Significant differences were evaluated by analysis of variance (ANOVA) and Duncan's test (P < 0.05). After 28 days storage, bacterial viability in the W1/O/W2 emulsions was above 6 log CFU/mL for all the pectin:mucilage ratios. Emulsions containing mucilage and pectins showed lower creaming indices after 15 days, remaining stable until the end of the storage period. Formulations including 1:1 pectin:mucilage ratio exhibited the highest bacterial viability under simulated gastrointestinal conditions and were more homogeneous in terms of droplet size distributions at day 0, hinting at a synergistic effect between mucilage components (e.g., proteins, Ca2+) and pectin in stabilizing the emulsions. These results showed that Opuntia silvestri mucilage enhanced the stability of emulsions during refrigerated storage, highlighting its potential for encapsulating lactic acid bacteria. This presents an economical and natural alternative to traditional encapsulating materials.

Enhancing pectin extraction from orange peel through citric acid-assisted optimization based on a dual response.

Pectin is widely used in several products in the industry. Conventionally, strong and harmful acids are used for its extraction. This study optimized the extraction of orange peel's pectin using citric acid, considering yield and degree of esterification (DE) as response variables. Proximal analyses were performed, and the samples were subjected to a Box-Behnken design on three central points, considering as variables the temperature, time, and pH. The results of proximate analyses of the orange peels revealed 11.76 % moisture content, 87.26 % volatiles, 0.09 % ash, 50.45 % soluble carbohydrates, 70.60 % total carbohydrates, 0.89 % fixed carbon, 5.35 % lipids, and 36.75 mg GAE/g of phenolic compounds. The resulting second-order polynomial model described the relation of the input and output variables related to each other. The best performance to obtain a higher yield (18.18 %) of high methoxyl pectin (DE 50 %) was set at 100 °C/30 min/pH 2.48. Pectin showed antioxidant properties by ABTS and DPPH assays and similar thermal properties to the commercial polymer. Its equivalent weight was 1219.51 mol/g, and the methoxyl and anhydrouronic acid were 2.23 and 67.10 %, respectively. Hence, pectin extraction with citric acid results in a high-quality polymer and could be used as a gelling agent, stabilizer, or texturizer in food products.

Fractionation and characterization of cell wall polysaccharides from coffee (Coffea arabica L.) pulp.

Cell wall polysaccharides were isolated by sequential extractions from coffee pulp, the main solid waste from coffee processing. Extractions were conducted with distilled water at room and boiling temperatures, 0.5 % ammonium oxalate and 0.05 M Na2CO3 to obtain pectic fractions. Hemicelluloses were extracted by using 2 M and 4 M NaOH. The composition of the hemicellulose fractions suggested the presence of xyloglucans, galactomannans and arabinogalactan-proteins (AGPs). The main part of the cell wall polysaccharides recovered from coffee pulp were pectins branched with arabinogalactans. Coffee pulp pectic fractions were low-methoxylated with various amounts of protein (0.5-8.4 %) and phenolics (0.7-8.5 %). Detection at 280 nm in the HPSEC analyses and radial gel diffusion assay using Yariv reagent indicated the presence of AGPs in most of these fractions. NMR analyses of chelating agent (CSP) and dialyzed water (WSPD) extracted pectins were carried out. The results demonstrated that CSP contains only AG I. On the other hand, AG I and AG II are present in WSPD, probably covalently linked to the pectic portion. Comparison with the literature indicated similarities between the cell wall polysaccharides from coffee pulp and green coffee beans.

Arabinan-rich pectic polysaccharide fraction from Malpighia emarginata fruits alleviates inflammatory pain in mice.

Malpighia emarginata (Malpighiaceae), popularly known as "acerola", is a tropical and subtropical fruit native to the Americas. Despite its high vitamin C content, which gives it a high antioxidant property, soluble dietary fibers, such as polysaccharides, are also abundant constituents of acerola (10% of the dried fruit). The acerola cold-water soluble (ACWS) fraction presented anti-fatigue and antioxidant effects in vivo and in vitro. To infer further systemic effects of ACWS, this study aimed to investigate the antinociceptive, anti-inflammatory, and antioxidant effects of ACWS in murine models of pain. In formalin-induced nociception, ACWS (0.1, 1, and 10 mg/kg) reduced only the inflammatory phase, and also (10 and 30 mg/kg) attenuated the acetic acid-induced writhing and leukocyte migration in the peritoneal cavity. The mechanical allodynia and paw edema induced by intraplantar injection of carrageenan were greatly reduced by ACWS (10 mg/kg). At the inflammatory pick induced by carrageenan (4 h), ACWS significantly reduced myeloperoxidase activity, TNF-α, IL-1ß, and PGE2 levels, and restored IL-10 levels. ACWS also exhibited antioxidant properties by decreasing lipid hydroperoxides content, increasing GSH levels, and restoring superoxide dismutase and catalase activities in the carrageenan model and 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging assay. Collectively, these results support the antinociceptive, anti-inflammatory, and antioxidant effects of ACWS and reveal a promising candidate for the treatment of inflammatory pain conditions.

Specific dietary fibers prevent heavy metal disruption of the human gut microbiota in vitro.

Heavy metal exposure is a growing concern due to its adverse effects on human health, including the disruption of gut microbiota composition and function. Dietary fibers have been shown to positively impact the gut microbiota and could mitigate some of the heavy metal negative effects. This study aimed to investigate the effects of different heavy metals (As, Cd and Hg in different concentrations) on gut microbiota in the presence and absence of different dietary fibers that included fructooligosaccharides, pectin, resistant starch, and wheat bran. We observed that whereas heavy metals impaired fiber fermentation outcomes for some fiber types, the presence of fibers generally protected gut microbial communities from heavy metal-induced changes, especially for As and Cd. Notably, the protective effects varied depending on fiber types, and heavy metal type and concentration and were overall stronger for wheat bran and pectin than other fiber types. Our findings suggest that dietary fibers play a role in mitigating the adverse effects of heavy metal exposure on gut microbiota health and may have implications for the development of dietary interventions to reduce dysbiosis associated with heavy metal exposure. Moreover, fiber-type specific outcomes highlight the importance of evidence-based selection of prebiotic dietary fibers to mitigate heavy metal toxicity to the gut microbiota.

Xanthan gum and pectin as beverage stabilizers reduce the digestive enzyme hydrolysis of antioxidant and antihypertensive peptides obtained from a brewery byproduct.

An acidic beverage was formulated with xanthan gum (XG), pectin (P) and brewer spent grain (BSG) peptides with antioxidant and antihypertensive properties. The impact of hydrocolloids levels on peptide bioaccessibility was studied. Peptides were obtained from BSG using Purazyme and Flavourzyme enzymes. BSG peptides were fractionated by ultrafiltration (UF) and four fractions were obtained: F1 (>10 kDa), F2 (10-5 kDa), F3 (1-5 kDa), and F4 (<1 kDa). F3 showed the highest protein purity, ferulic acid content, proportion of amphipathic peptides, and bioactive properties (ABTS+ radical scavenging and ACE-I inhibitory activity). The identified peptides from F3 by tandem mass spectrometry were 138. In silico analysis showed that 26 identified peptides had ABTS+ inhibitory activity, while 59 ones presented good antihypertensive properties. The effect of XG and P levels on bioaccessibility of F3 peptides in the formulated beverages was studied by a central composite experimental design. It was observed that F3 peptides interacted with hydrocolloids by electrostatic forces at pH of formulated beverages. The addition of hydrocolloids to formulation modulated the release of the antioxidant peptides and protected the degradation of ACE-I inhibitory peptides from F3 during simulated gastrointestinal digestion. Finally, the level of hydrocolloids that produced intermediate viscosities in the formulated beverages improved the bioaccessibility of the F3 peptides.

Characterization of antifungal properties of avocado leaves and majagua flowers extracts and their potential application to control Alternaria alternata.

Plant extracts are used as an alternative to a wide range of foods against different types of fungal pathogens. In the present study, the extracts of avocado leaves (Persea americana) and majagua flowers (Talipariti elatum) were tested according to their antifungal activity against different fungi. The most promising extracts were those of majagua flowers that were applied lyophilized and in aqueous extract, being very effective against Alternaria alternata and reaching a 50 % in vitro reduction. Antifungal properties were also evaluated during infection of apples by A. alternata. A decrease in infection progression was confirmed with up to a 30 % reduction in disease incidence and a 20 % reduction in disease severity. Majagua extracts were also tested combined with edible pectin coatings, greatly increasing their effectiveness up 60 % reduction. Thus, extracts of majagua could provide a feasible alternative to control fungal pathogens during postharvest.

A multidimensional evaluation of the effects of sweetener selection and UV-C treatment on orange juice and pectin-based confectionery gels.

BACKGROUND: Consumers are seeking healthier alternatives to traditional confectioneries. They value the use of sugar replacers, more natural ingredients and/or environmentally friendly preservation technologies. UV-C light is considered an emerging alternative to thermal pasteurization that leaves no residue and requires minimal energy. The present study aimed to investigate the effect of novel sweetener combinations and juice UV-C assisted by mild heat treatment (UV-C/H) on the physicochemical, microbiological, morphological, rheological and sensory properties of orange juice pectin-based confectioneries stored at 5 ± 1 °C for 35 days. RESULTS: For orange juice processing, UV-C/H (pilot-scale Dean-flow reactor; 892 mJ cm-2 ; 50 ± 1 °C) and thermal (T-coil, 80 °C; 6 min) treatments were used. Low-calorie confectionery gels were elaborated using the treated juices, low-methoxyl pectin and various sweetener combinations. UV-C/H and T-coil effectively inactivated juice native microbiota. The proposed formulations, derived from a previous Box-Behnken optimization study, included partial (F1: 3%-sucrose-S + 0.019%-rebaudioside-A-RA) or complete sucrose replacement (F2: 5.5%-erythritol-E + 0.019%-RA), and one control (C:10%-S). In general, the microbiota of the gels prepared with the UV-C/H or T-coil treated juices did not recover during storage. The physicochemical and mechanical parameters of the formulations were significantly influenced by the choice of sweetener and the duration of storage. The gel surface got smoother and had fewer holes when the sucrose level dropped, according to a scanning electron microscopy study. The UV-C/H-treated samples did not differ in acceptability, whereas the measured sensory attributes approached ideal levels. F1 and F2 showed distinctive temporal-dominance-of-sensations profiles, mainly dominated by sweetness and orange taste, respectively. However, consumers perceived sourness and astringency in C during consumption. CONCLUSION: The present study provides significant evidence in support of the development of confectionery gels F1 and F2 made from fruit juice treated by UV-C light assisted by mild heat and combinations of sucrose-alternative sweeteners. In terms of the properties investigated, these confectionery gels were comparable to, or even outperformed the full-sucrose option. © 2023 Society of Chemical Industry.

Tailored ethylenediamine-functionalized graphene oxide membrane on kaolin hollow fibers for pectin concentration.

Pectin is a valuable product that can be extracted from waste fruit peels. Here we propose the use of graphene oxide (GO)-based membranes for pectin concentration. The synthesized GO was functionalized with ethylenediamine (EDA) to molecularly design the GO framework. Kaolin hollow fibers with asymmetric pore distribution were used as a porous substrate for GO/EDA deposition. A GO/EDA layer with a thickness of 2.86 ± 0.24 µm was assembled on the substrate by the simple vacuum-assisted deposition method. After GO/EDA depositions, the water permeance of the pristine kaolin hollow fibers reduced from 8.46 ± 0.17 to 0.52 ± 0.03 L h-1·m-2·kPa-1. A pectin aqueous extract from orange peels was filtered at cross-flow mode through the prepared membranes and the steady-state fluxes through pristine and GO/EDA-coated hollow fibers were 56 ± 2 and 20 ± 3 L h-1 m-2, respectively. The GO/EDA-coated membrane presented greater pectin selectivity than the pristine hollow fiber. The GO/EDA-coated hollow fiber concentrated the galacturonic acid, phenolic, and methoxyl contents in 19.5, 17.4, and 29.2 %, respectively. Thus, filtration through the GO/EDA-based membrane is a suitable alternative for pectin concentration.

Development and characterization of films from Campomanesia xanthocarpa and commercial citrus pectins with different degrees of methyl-esterification.

In this study, pectins from commercial citrus and isolated from gabiroba (Campomanesia xanthocarpa) fruits, were obtained with different degrees of methyl-esterification (DM) and applied in the films. The DM ranged from 0 % to 62.5 % and the gradual de-esterification process was confirmed by mono-dimensional analysis (1H NMR). In order to investigate the influence of DM values in pectin film properties, PCP (DM: 62.5 %); PCP-5 (DM: 37.4 %); PCP-15 (DM: 19.1 %), and a fully de-esterified sample PCP-35 (DM: 0 %) were selected. The functional properties of the films clearly showed that the DM and cross-linking process are necessary to obtain a material with water resistance. Furthermore, pectin isolated from the fruits of gabiroba was purified (GW-Na, DM: 51.9 %) and partially de-esterified (GW-Na-5, DM: 37.1 %). These pectins were used, for the first time, in development of films and the physical and mechanical properties were compared with films made with PCP and PCP-5 samples. GW-Na and GW-Na-5 films presented suitable properties, with reduced solubility reduced (57.1 and 26.2 %), high degree of swelling (2.14 and 2.26), low flexibility (18.05 and 6.11 MPa), respectively. High strength and rigidity (99.36 and 1040.9 MPa), for both films (GW-Na and GW-Na-5) were demonstrated, similar to that obtained by analyzed citrus pectin.

Polyphenol-Enriched Pectin from Pomegranate Peel: Multi-Objective Optimization of the Eco-Friendly Extraction Process.

A multi-objective optimization was performed using response surface methodology to obtain a high-value-added product, pectin enriched in polyphenols, from pomegranate peel. For this purpose, a green extraction technique that combines citric acid and ultrasound was carried out considering three variables: time, pH, and temperature. The extraction procedure was optimized using the Box-Behnken design, these being the most suitable conditions, with an extraction time of 34.16 min, a pH of 2.2, and a temperature of 89.87 °C. At this point, the pectin yield was 31.89%, with a total retained polyphenol content of 15.84 mg GAE/g pectin. In addition, the water activity, ash content, equivalent weight, methoxyl content, and degree of esterification were determined for the pectin obtained at the optimal point. This study demonstrates that polyphenol-enriched pectin can be obtained from pomegranate peel via an eco-friendly and efficient method, and that it presents similar properties to commercial pectin, preserving its quality and with potential use as an ingredient or food supplement with a high nutritional value. This work contributes to developing sustainable strategies to valorize pomegranate agro-industrial waste and produce high-value functional ingredients.

Genome-wide survey and evolutionary history of the pectin methylesterase (PME) gene family in the Dothideomycetes class of fungi.

Once deposited in the plant cell wall, pectin undergoes demethylesterification by endogenous pectin methylesterases (PMEs), which play various roles in growth and development, including defense against pathogen attacks. Pathogen PMEs can alter pectin's methylesterification pattern, increasing its susceptibility to degradation by other fungal pectinases and thus playing a critical role as virulence factors during early infection stages. To investigate the evolutionary history of PMEs in the Dothideomycetes class of fungi, we obtained genomic data from 15 orders (79 species) and added genomic data from 61 isolates of Corynespora cassiicola. Our analyses involved maximum likelihood phylogenies, gene genealogies, and selection analyses. Additionally, we measured PME gene expression levels of C. cassiicola using soybean as a host through RT-qPCR assays. We recovered 145 putative effector PMEs and 57 putative non-effector PMEs from across the Dothideomycetes. The PME gene family exhibits a small size (up to 5 members per genome) and comprises three major clades. The evolutionary patterns of the PME1 and PME2 clades were largely shaped by duplications and recurring gene retention events, while biased gene loss characterized the small-sized PME3 clade. The presence of five members in the PME gene family of C. cassiicola suggests that the family may play a key role in the evolutionary success of C. cassiicola as a polyphagous plant pathogen. The haplogroups Cc_PME1.1 and Cc_PME1.2 exhibited an accelerated rate of evolution, whereas Cc_PME2.1, Cc_PME2.2, and Cc_PME2.3 seem to be under strong purifying selective constraints. All five PME genes were expressed during infection of soybean leaves, with the highest levels during from six to eight days post-inoculation. The highest relative expression level was measured for CC_29_g7533, a member of the Cc_PME2.3 clade, while the remaining four genes had relatively lower levels of expression.

Agroindustrial and food processing residues valorization for solid-state fermentation processes: A case for optimizing the co-production of hydrolytic enzymes.

In the pursuit of sustainability, managing agro-industrial and food processing residues (AFR) efficiently is crucial. This study proposes a systematic approach to convert AFR into valuable products via solid-state fermentation (SSF). Using fungal enzyme production as a case study, this adaptable methodology suits any SSF bioprocess. Initially, AFR's physicochemical properties were evaluated to assess their feasible use as carbon sources and solid matrices for SSF. Then, five strains were screened for their capability to produce enzymes (Xylanase, X; pectinase, P; cellulase, C). Apple pomace (AP) and brewery spent grain (BSG) with Aspergillus sp. (strain G5) were selected. Subsequent steps involved a two-phase statistical approach, identifying critical factors and optimizing them. Process conditions were screened using a Plackett-Burman design, narrowing critical variables to three (BSG/AP, pH, humidity). Response Surface Methodology (Central Composite Design) further optimized these factors for co-synthesis of X, P, and C. The humidity had the most significant effect on the three responses. The optimum conditions depended on each enzyme and were further validated to maximize either X, P or C. The obtained extracts were used for pectin extraction from orange peels. The extract containing primarily xylanase (X = 582.39, P = 22.86, C = 26.10 U mL-1) showed major pectin yield recovery (12.33 ± 0.53%) and it was obtained using the optimal settings of BSG/AP (81/19), humidity (50.40%), and pH (4.58). The findings will enable adjusting process conditions to obtain enzymatic cocktails with a tailored composition for specific applications.

Semiochemical delivery systems based on natural polymers to attract sand flies (Diptera: Psychodidae).

BACKGROUND: The successful use of semiochemicals to attract insects to traps is based on research on the most suitable compounds and their release profiles over time. Based on the group's promising results, matrices with a more adequate release profile and more eco-friendly properties for the release of 1-hexanol were developed. To use a more suitable prototype in the field, the most promising systems were added to a capsule and evaluated in a wind tunnel. Behavioral experiments were performed using the sand fly species, Lutzomyia longipalpis, to evaluate the efficacy of the proposed system. METHODS: Different delivery systems were developed by varying the polymer (gellan gum and pectin) ratio, crosslinker (aluminum chloride) concentration, and glutaraldehyde removal.The delivery systems were loaded with 1-hexanol, and their release profiles were evaluated using gravimetric analysis under ambient and high-humidity conditions. When the matrix system was placed inside a plastic container, modulations in the active release profile were observed and the system could be reused. Actid attraction behaviors of the sand fly species, Lu. longipalpis, were evaluated in a wind tunnel when exposed to 1-hexanol-loaded release systems at different times. RESULTS: Among the four formulations evaluated, System 2 (gellan gum and pectin in a 1:1 ratio with 5% aluminum chloride) exhibited the most promising release profile, with greater uniformity and longer compound release time. The maximum 1-hexanol release uniformity was achieved over a longer time, mainly every 24 h, under both ambient and high-humidity conditions. System 2 can be reused at least once with the same structure. The wind tunnel trials exhibited efficient activation and attraction of Lu. longipalpis to 1-hexanol after 24, 48, and 72 h in System 2 placed inside the capsules. CONCLUSIONS: The polymeric matrix supplemented with 1-hexanol and introduced in plastic capsules showed promising results in attracting sand flies. This system can be used as a solution for other attractive compounds as well as in other applications where their release needs to be controlled or prolonged.