Evaluating the accuracy of CEREC intraoral scanners for inlay restorations: impact of adjacent tooth materials.

BACKGROUND: The accuracy of intraoral scanning is critical for computer-aided design/computer-aided manufacturing workflows in dentistry. However, data regarding the scanning accuracy of various adjacent restorative materials and intraoral scanners are lacking. This in vitro study aimed to evaluate the effect of adjacent restorative material type and CEREC's intraoral scanners on the accuracy of intraoral digital impressions for inlay cavities. METHODS: The artificial tooth was prepared with an occlusal cavity depth of 2 mm, a proximal box width at the gingival floor of 1.5 mm, and an equi-gingival margin extended disto-occlusally at the transition line angle on both the lingual and buccal sides for an inlay restoration. The adjacent teeth were veneered with crowns made of gold and zirconia, and an artificial tooth (resin) was utilized as the control group. The inlay cavity and adjacent teeth (Gold, Zirconia, and resin) were scanned 10 times using Chairside Economical Restoration of Esthetic Ceramics (CEREC) Primescan (PS), Omnicam (OC), and Bluecam (BC). A reference scan was obtained using a laboratory scanner (3-shape E3). Scanning was performed according to the manufacturer's instructions, including powder application for the BC group. Standard tesselation language files were analyzed using a three-dimensional analysis software program. Experimental data were analyzed using a two-way analysis of variance and the Tukey's post-hoc comparison test. RESULTS: The restorative materials of the adjacent teeth significantly affected the accuracy of the intraoral digital impressions (p < .05). The zirconia group exhibited the highest trueness deviation, followed by the resin and gold groups, with each demonstrating a statistically significant difference (p < .05). The resin group demonstrated the highest maximum positive deviation and deviation in precision. Gold exhibited the lowest average deviation value for trueness compared with those of the other adjacent restorative materials. Intraoral scanner type significantly influenced the trueness and precision of the scan data (p < .05). The average deviation of trueness according to the intraoral scanner type increased in the following order: BC > PS > OC. The average deviation in precision increased in the following order: PS>OC>BC (p < .05). CONCLUSION: The restorative materials of the adjacent tooth and the type of intraoral scanner affect the accuracy of the intraoral digital impression. The trueness of the digital images of the BC group, obtained by spraying the powder, was comparable to that of the PS group. Among the adjacent restorative materials, zirconia exhibited the lowest trueness. In contrast, PS demonstrated the highest precision among the intraoral scanners, while resin displayed the lowest precision among the adjacent restorative materials.

Systemic Factors Affecting Prognosis in Restorative and Prosthetic Dentistry: A Review.

The field of restorative and prosthetic dentistry focuses on restoring lost tooth structures and replacing missing teeth and lost tissue to restore or improve esthetics and oral health. Many systemic factors such as metabolic, bone, autoimmune, cardiovascular, and endocrine disorders can affect healing procedures, and bone density and impact oral health. Hence patients suffering from systemic disease when treated for prosthodontic rehabilitation can have negative prognostic outcomes. The commonest prosthodontic treatments that can be affected include dental implants, fixed prostheses, and removable prostheses. Understanding and managing these systemic factors play a key role in the success of prosthodontic treatment.

Effect of carbamide peroxide treatment on the ion release of different dental restorative materials.

BACKGROUND: To predict the long-term performance of restorative materials in the oral environment, it is important to evaluate their resistance to chemical and mechanical degradation and to know the toxic potential of the type and amount of ions eluted from the filling material. In this study, home bleaching was applied to dental materials with different contents and it was aimed to determine the type and amount of ions released from these materials. METHODS: In this study, amalgam, posterior composite resin, anterior composite resin, bulk fill composite resin, indirect composite resin, hybrid ceramic and all-ceramic were used as restorative materials. 10 specimens of each material were prepared according to the manufacturer's instructions. Each material group was divided into two subgroups as the bleached group and the control group. After bleaching, all specimens were stored in 1 ml of 75% ethanol/water solution. Solutions were renewed after 1, 14 and 28 days. The type and amount of ions released from the materials were determined using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Data were analyzed using the Friedman, Wilcoxon Signed Ranks, and Mann-Whitney U tests (α = 0.05). RESULTS: It was determined that the amount of ions release from the restorative materials decreased over time (p < 0.05). According to the results of the Mann-Whitney U test, there was no difference between the bleaching and control groups in most of the restorative materials (p > 0.05). CONCLUSION: Within the limits of this study, home bleaching system does not have a significant effect on ion release from restorative materials.

The role of orthodontics in the management of tooth wear.

Pathological tooth wear is a dental problem that affects all age groups and appears to be increasing in prevalence. A subset of these patients may benefit from a combination of orthodontic and restorative care which will be discussed in this article. Orthodontics can help to create the necessary vertical, anterior-posterior and mesio-distal space for restorative work, reducing the need for tooth reduction and lessening the biological costs of restorative care, helping to reposition the gingival margins where this impacts upon aesthetics, as well as correcting co-existing malocclusion.

Principles of interdisciplinary orthodontic and restorative treatment.

Dentistry has changed significantly in the last two decades. Interdisciplinary treatment planning strives to deliver the highest quality of care through innovative collaborations among providers and the patient. The complexity of the care and challenges in interdisciplinary team communications are primary hurdles. We discuss five principles of interdisciplinary orthodontic-restorative treatment and outline a four-step interdisciplinary treatment planning process, starting with a comprehensive clinical examination to collect subjective and objective data. Diagnostic records, including 3D models, videos, 2D photos, questionnaires, and reports, are then evaluated to develop a problem list and treatment objectives. Treatment simulation is used to envision the outcome and guide the formulation of an orthodontic-restorative treatment plan. The plan can be broken down into stages, depending on the condition of the teeth and the planned restorative treatment. The challenges and opportunities presented by digital dentistry and the potential for more efficient interdisciplinary treatment are presented. In sum, this article provides an overview of the principles and framework for interdisciplinary orthodontic-restorative treatment, emphasising the importance of collaboration, communication and comprehensive treatment planning.

Four-year Outcomes of Class III and IV Anterior Restorations Based on a Subset of German Health Insurance Data.

PURPOSE: Numerous studies report on the outcome performance of posterior composite restorations. However, there are fewer studies providing data for anterior restorations. The aim of this study was to evaluate the clinical outcome performance of anterior permanent restorations by analyzing a large dataset from a German national health insurance company. MATERIALS AND METHODS: Routine claims data from a major German national health insurance company were assessed. Fee codes were used for tracing restoration careers on a day-count basis. The treatment was defined as a placed restoration (Class III and IV) on a mesial or distal tooth surface, irrespective of the extension. The restorations were placed between January 1, 2010 and December 31, 2013. Statistical analyses were conducted using Kaplan-Meier survival analysis to determine cumulative 4-year survival rates. The primary outcome was re-intervention on the same surface. Secondary outcomes were crowning and extraction which were analyzed separately. RESULTS: A total of 2,417,791 restorations involving mesial surfaces and a number of 2,409,031 restorations involving distal surfaces were observed. At 4 years, the cumulative survival rates concerning the primary outcome 're-intervention' were 79.9% for mesial and 80.9% for distal restorations. The respective annual failure rates (AFR) were 5.5% and 5.2%. Four-year survival rates for the secondary outcome 'crown' were 93.8% for mesial and 94.1% for distal anterior restorations. The respective AFRs were 1.6% and 1.5%. For the secondary outcome 'extraction,' the respective rates were 94.6% for mesial and 93.9% for distal restorations. The respective AFRs were 1.4% and 1.6%. CONCLUSION: The performance of permanent anterior restorations which were placed in general dental practices in Germany can be rated as acceptable.

Postoperative pain after total pulpotomy and root canal treatment in mature molars according to the new and traditional classifications of pulpitis: a prospective, randomized controlled trial.

BACKGROUND: The aim of this study was to compare postoperative pain following total pulpotomy (TP) and root canal treatment (RCT) in mature molar teeth with irreversible pulpitis. To compare the traditional pulpitis classification system with the Wolters system in evaluating postoperative pain. METHODS: Eighty mandibular molars with irreversible pulpitis were included and classified according to the Wolters (moderate/severe pulpitis). The teeth were randomly assigned to two groups (RCT or TP). RCT was performed following standardized protocols. TP was performed to the level of the canal orifices, and hemostasis was achieved with 2.5% sodium hypochlorite. A 3 mm layer of MTA was placed as the pulpotomy material. The teeth were restored with glass ionomer cement followed by composite. Pain scores were recorded preoperatively and, at 6, 12, 24, 48, and 72 h and 7 days after the interventions. The data were statistically analyzed using the Mann-Whitney U test, the Friedman test, the Wilcoxon signed-rank test, and the Spearman's correlation test. The significance level was set at 0.05. RESULTS: Sixty-four patients were analyzed at the one-week follow-up and all were diagnosed as irreversible pulpitis according to the AAE; 22 teeth were classified as moderate and 42 teeth were classified as severe pulpitis according to Wolters. There was no significant difference between TP and RCT in pain scores in moderate pulpitis patients (p > 0.05). There was a significant difference between TP and RCT at 24 and 72 h of severe pulpitis; higher pain scores were observed in the RCT (p < 0.05). CONCLUSIONS: In patients with moderate pulpitis, the TP procedure allowed symptom relief more quickly than RCT. In patients with severe pulpitis, TP provided for significantly lower pain scores compared to RCT at both 24 and 72 h. CLINICAL TRIAL REGISTRATION: The study was retrospectively registered with ClinicalTrials.gov (NCT05923619). Date of Registration: 06/16/23.

Postoperative sensitivity of composites using novel Bacillus subtilis nanofortified adhesives: a triple-blind study.

NANOTECHNOLOGY: is the art and science of dealing with nanoscale particles. This has transformed contemporary dental practices through myriad contributions to biomaterial science. Titanium dioxide nanoparticles procured from Bacillus subtilis, an eco-friendly and biogenic source, can significantly magnify the physiochemical attributes of dental materials. However, postoperative sensitivity is a major drawback of composite restorations. The incorporation of these nanoparticles into dental adhesives can greatly benefit clinical dentistry by resolving this issue. This trial aimed to evaluate the effectiveness of a novel titanium dioxide nanofortified adhesive on the postoperative sensitivity of composite restorations. METHODS: This triple-blind, parallel-group randomized controlled trial was conducted at the Department of Operative Dentistry and Endodontics, School of Dentistry, Islamabad, from May 15, 2023, to November 25, 2023. Participants (n = 60) with Class I and II primary carious lesions with a minimum cavity depth of 3-5 mm were randomly assigned to two groups (n = 30). After obtaining informed consent, the restorative procedure was accomplished using a minimally invasive approach and etch-and-rinse adhesive strategy. In group A, a nanofortified adhesive was used for composite restoration, whereas in group B, an adhesive without nanoparticles was used. Postoperative sensitivity was evaluated using the Visual Analog Scale (VAS) score at follow-up periods: of one day, one week, two weeks and one month. A Chi-square test was used to compare postoperative sensitivity between the two groups. The level of significance was set at p < 0.05. RESULTS: A noteworthy association was observed between sensitivity and the group variable at all four evaluation periods: after one day (p = 0.002), 1 week (p = 0.002), 2 weeks (p = 0.007) and one month. In conclusion, participants who underwent restorative intervention using titanium dioxide nanoreinforced adhesives reported a notable reduction in sensitivity at all time intervals. Hence, the occurrence and severity of postoperative sensitivity are significantly reduced using Bacillus subtilis-procured nanofortified adhesives as compared to conventional adhesives without nanoparticles. TRIAL REGISTRATION: This trial was retrospectively registered at ClinicalTrials.gov (ID: NCT06242184) on 03/02/2024. All procedures involving human participants were performed in conformance with this protocol.

Evaluation of nanohardness, elastic modulus, and surface roughness of fluoride-releasing tooth colored restorative materials.

Recently, interest in tooth-colored fluoride-releasing dental materials has increased. Although physical and mechanical properties such as surface hardness, elastic modulus and surface roughness of the restorative materials have been investigated, the effect of different immersion media on these properties is still controversial. The aim of this study was to evaluate the nanohardness, elastic modulus and surface roughness of the fluoride release of tooth-colored restorative materials after immersion in acidic beverages. Prepared samples of three restorative materials (a highly viscous glass ionomer (EQUIA Forte; GC, Tokyo, Japan), a compomer (Dyract XP; Dentsply, Weybridge, UK), and a bioactive restorative material (Activa BioACTIVE; Pulpdent, MA, USA)) were randomly divided and immersed in distilled water, a cola and an orange juice for one week. The HYSITRON T1 950 TriboIndenter device (Hysitron, USA) with the Berkovich diamond indenter tip was used for all measurements. The nanohardness and elastic modulus of the samples were measured by applying a force of 6000 µN to five different points on the sample surface. Surface roughness measurements were evaluated on random samples by scanning five random 40 × 40 µm areas. The properties were measured at the initial and one week after immersion. The values of nanohardness, elastic modulus and surface roughness were tested for significant differences using a two-way analysis of variance (ANOVA) with repeated measures (p < 0.05). Tukey's honest significant difference (HSD) test was used for multiple comparisons. AB (Activa BioACTIVE) had the highest initial mean values for nanohardness. After post-immersion, the highest mean value for elastic modulus was the initial AB value. The lowest mean value for roughness of 100.36 nm was obtained for the initial DX (Dyract XP) measurement. Acidic beverages had a negative effect on the nanohardness, elastic modulus and surface roughness of the restorative materials.

A severely damaged premolar tooth restored with coronal pulpotomy and a 3D-printed endocrown.

Advances in computer-aided design/computer-aided manufacturing (CAD-CAM) technologies and adhesives have enabled the use of endocrowns as an effective and conservative treatment option for restoring endodontically treated teeth in pediatric populations. Thus, this case report presents the treatment of a severely damaged premolar tooth with coronal pulpotomy and a 3D-printed endocrown restoration. A 13-year-old patient with pain due to profound caries in the left maxillary second premolar tooth was referred to the Department of Pediatric Dentistry at Gazi University in Ankara, Türkiye. Deep dentinal caries and severe tissue loss were revealed in the clinical examination. No periradicular lesions were detected in a radiographic examination, and there was no inflammation in the pulp. The selected intervention was a two-step process involving a coronal pulpotomy followed by a custom 3D-printed endocrown restoration. No clinical complications or radiographic pathologies were observed over a two-year follow-up period, and the patient was satisfied with the final esthetics and function of the restoration. 3D-printing technology can be successfully integrated into pediatric restorative dentistry and offers a conservative, efficient, and esthetically pleasing treatment option for children with severely damaged dentition.

Effect of immune-boosting beverage, energy beverage, hydrogen peroxide superior, polishing methods and fine-grained dental prophylaxis paste on color of CAD-CAM restorative materials.

BACKGROUND: The effect of an immune-boosting beverage (SAM) containing Sambucus Nigra, an energy beverage (ENE), an in-office bleaching (BLE) agent with 25% hydrogen peroxide superior, glazing (GLA) or polishing (POL) methods, and professional dental prophylaxis (PDP) on the color of CAD-CAM restorative materials is unknown. METHODS: In total 210 specimens were prepared, consisting of CAD-CAM feldspathic (FC), zirconia-reinforced lithium disilicate ceramic (ZLS) and hybrid ceramic (HC). The ceramic specimens were divided according to the polishing methods of glazing (GLA) and mechanical polishing (POL). All materials were divided into two groups: with and without BLE. A 25% hydrogen peroxide superior (HPS) gel was used for BLE. After the baseline (BAS) measurement, the specimens were immersed in 3 different beverages (distilled water (DIS), SAM, ENE). After 28 days, a fine-grained (RDA 7) prophylaxis paste was applied. Statistical analysis of ∆E00 color difference values was performed by 3-way ANOVA and Bonferroni test (α = 0.05). RESULTS: The effect of all other actions except material-BLE-beverage on color for BAS-Day 28 was statistically different (p < 0.05). The effect of material, material-BLE, beverage on color for Day 28-PDP was statistically different (p < 0.05). After 28 days, the lowest color change was found in FC-GLA and HC immersed in DIS (p = 0.0001) and the highest in FC-POL immersed in ENE (p = 0.0002). PDP was efficient in color recovery in HC immersed to DIS, ENE and SAM (p = 0.0010). For FC, HC and ZLS, BLE caused a higher color change (p < 0.0001). Regardless of the material, the highest color change for BLE-beverage was found in BLE-treated specimens immersed in ENE (p = 0.0496) and the lowest color change was found in non-BLE-treated specimens immersed in SAM (p = 0.0074). CONCLUSIONS: In materials pre-exposed to 25% HPS, the effect of PDP on color recovery was lower than in unexposed materials. After 28 days, mechanical polishing produced higher color change in FC than glazing, however, in ZLS effects of glazing and mechanical polishing on color were similar. For material/polishing method, HC was the most effective. ENE caused higher color change than DIS and SAM. PDP was more effective than ENE in restoring color to DIS- and SAM-immersed specimens.

Microscopic and statistical evaluation of the marginal defects of composite restorations: in vitro studies.

This study aimed to evaluate the quality of dental restorations using laboratory microscopic techniques, focusing on the positioning of restorations relative to cavity edges and identifying common errors, such as incomplete or excessive coronal restorations. A total of 41 extracted lateral teeth, previously treated in vivo with Class I or II composites, were analyzed. Thirty-three of these teeth were sectioned medio-distally or buccal-orally and examined under a research laboratory microscope. Marginal areas were measured using eyepieces with a graduated scale and calibration slide, and a frequency statistical analysis was conducted. The analysis revealed that the teeth had fractious edges, deficient marginal closure, excess composite, incorrectly restored occlusal cusps, and marginal adaptation errors, with approximately half of these errors involving excess material. It was observed that restoration procedures in distal areas are particularly challenging, and clinical errors with excess material occur more frequently than those with a deficit. These findings underscore the need for improved techniques and precision in dental restorations to minimize such errors.

Effect of silver diamine fluoride application on the microtensile bond strength of three commonly used restorative materials in primary teeth: An ultrastructural study.

INTRODUCTION: Caries in primary teeth rapidly advances owing to its thin structure, thereby requiring restoration. However, restorations often fail due to various causes such as secondary caries and reduced microtensile bond strength (µTBS), which calls for the use of antimicrobial agents such as silver diamine fluoride (SDF). AIM: This study aims to measure and analyse the effect of SDF application on the µTBS of three regularly used restorative materials to dentin of primary teeth as well as compare the types of bond failure interfaces under SEM. MATERIALS AND METHODS: The study comprised 60 samples equally divided into six groups among three restorative materials, namely, glass ionomer cement (GIC, Groups I and II), resin-modified glass ionomer cement (RMGIC, Groups III and IV), and composite resin (Groups V and VI) with subdivisions of A and B, where A represented samples with SDF application and B represented samples without SDF application. RESULTS AND OBSERVATIONS: It was observed that µTBS of RMGIC to sound and carious dentin irrespective of SDF application was found to be statistically significant (P < 0.05), and when GIC, RMGIC, and composite resins were compared to both sound and carious dentin irrespective of SDF application, it was statistically significant (P < 0.05). SEM analysis revealed predominantly cohesive failures among all the groups. CONCLUSION: Based on the results, it was concluded that SDF has no adverse effect on the µTBS of GIC, RMGIC, and composite resin to both carious and sound dentin of primary teeth.

Direct Composite Restorations on Permanent Teeth in the Anterior and Posterior Region - An Evidence-Based Clinical Practice Guideline - Part 1: Indications for Composite Restorations.

PURPOSE: This German S3 clinical practice guideline offers evidence-based recommendations for the use of composite materials in direct restorations of permanent teeth. Outcomes considered were the survival rates and restoration quality and process quality of the manufacturing process. Part 1 of this two-part presentation deals with the indication classes. MATERIALS AND METHODS: A systematic literature search was conducted by two methodologists using MEDLINE and the Cochrane Library via the OVID platform, including studies up to December 2021. Six PICO questions were developed to guide the search. Recommendations were formulated by a panel of dental professionals from 20 national societies and organizations based on the collected evidence. RESULTS: Composite materials are a viable option for the direct restoration of cavity Classes I-V and may also be used for restorations with cusp replacement, and tooth shape corrections. In the posterior region, direct composite restorations should be preferred over indirect composite inlays. For Class V restorations, composite materials can be used if adequate contamination control and adhesive technique are ensured. CONCLUSION: The guideline is the first to provide comprehensive evidence on the use of direct composite materials. However, further long-term clinical studies with comparators such as (modified) glass-ionomer cements are necessary. Regular updates will detail the future scope and limitations of direct composite restorations.

Direct Composite Restorations on Permanent Teeth in the Anterior and Posterior Region - An Evidence-Based Clinical Practice Guideline - Part 2: Recommendations for Composite Processing.

PURPOSE: Part 2 of this German S3 clinical practice guideline provides recommendations for the process of manufacturing composite restorations. It covers key aspects like caries removal, field isolation, matrix and adhesive techniques, as well as light curing and polishing. The outcomes of interest include survival rates and restoration quality. MATERIALS AND METHODS: A systematic literature search was conducted by two methodologists using MEDLINE and the Cochrane Library via the OVID platform, including studies up to December 2021. Additionally, the reference lists of relevant manuscripts were manually reviewed. Six PICO questions were developed to guide the search. Consensus-based recommendations were for- mulated by a panel of dental professionals from 20 national societies and organizations based on the collected evidence and ex- pert opinion. RESULTS: The guideline advocates for one-stage selective caries removal near the pulp and underscores the effectiveness of various isolation techniques, adhesive systems, and the crucial role of light polymerization. The use of anatomically pre- formed sectional matrices and phosphoric acid etching is recommended to enhance restoration quality. Additionally, polish- ing composite restorations is advised to improve surface finish. CONCLUSION: This guideline provides comprehensive recommendations that inform clinicians on optimizing the composite restor- ation manufacturing processes. The adoption of these best practices can improve the quality and longevity of dental restorations.

The effect of cessation of drinking water fluoridation on dental restorations and crowns in children aged 3-5 years in Israel - a retrospective study.

BACKGROUND: Community water fluoridation began in the 1945 as a public health measure to prevent and control caries and was implemented in Israel in 1981. Community water fluoridation reduced caries significantly, but in 2014, the Ministry of Health decided to stop Community water fluoridation in Israel. The aim of our study was to examine the effect of fluoridation cessation on the dental health of children aged 3-5, treated in "Assuta Tel Aviv" dental clinics, under general anesthesia or deep sedation. METHODS: The computerized Maccabi-Dent database provided data for this retrospective study. Records from the years 2014-2019 including treatment codes for procedures relevant to the study, the number of stainless-steel crowns and restorations of all types were examined. Kruskal-Wallis test was performed to compare the results from before and after fluoridation cessation. RESULTS: A statistically significant increase in the mean number of treatments in the years after fluoridation cessation (P < 0.05) was found. There was approximately a two-fold increase in the number of all treatments for all ages. CONCLUSION: The results of the study emphasize the advantages of water fluoridation and are further proof of the need to restore community water fluoridation in Israel.

The survival and clinical performance of anterior composite resin restorations and posterior indirect and cast restorations used to treat generalised tooth wear.

Objective To evaluate the survival and clinical performance of restorative materials used in the rehabilitation of generalised severe tooth wear within a UK NHS postgraduate teaching hospital.Methods The clinical performance of 527 restorations on 20 patients with generalised severe tooth wear was reviewed after a mean period of five years. Anterior teeth were restored with direct composite resin and posterior teeth with indirect restorations. The study used the modified United States Public Health Service criteria for restoration assessment. Survival of the restorations was analysed using Kaplan-Meier survival curves, the log-rank test and the Cox proportional hazards regression analysis.Results The sample included 20 participants: 13 men and 7 women, with a median age of 51.8 years (range: 33-73 years). The median survival time for all restorations was 11.3 years when major failures were considered and 5.9 years for restorations when all types of failure were considered. A median survival time of 5.9 years for composite resin restorations and over seven years for cast restorations was found when considering all failures. Composite resin restorations commonly failed as a result of fracture, wear and marginal discolouration. Factors significantly influencing restoration survival were the material used, aetiology, incisal relationship and tooth location. The biological complications associated with this treatment regime were rare. Patient satisfaction remained generally high, with greatest dissatisfaction related to treatment time.Conclusions The use of anterior composite resin with posterior indirect restorations to treat generalised severe tooth wear is a viable treatment modality with very few major complications.

A comparison of the radiopacities of CAD-CAM restoratives: Effect of thickness.

PURPOSE: To evaluate the radiopacities of CAD-CAM materials using digital techniques. METHODS: Five different CAD-CAM materials were used (Cerasmart, LAVA Ultimate, Cerec Blocs C, Tetric CAD, and IPS e.max CAD) in this study (n= 5). For each group, samples with thicknesses of 1 and 2 mm were prepared. As a control, tooth slices with 1 and 2 mm thicknesses and a 99.5% pure aluminum step wedge were used. The samples, tooth slices, and step wedges were placed on a photostimulable phosphor plate. Radiographs were taken at 30 cm distance with 7 mA, 70 kVp, and 0.32 ms exposure time. The images were analyzed using the ImageJ software to measure the mean gray values. Data were analyzed with Kruskal-Wallis H test and the Mann-Whitney U test (P< 0.05). RESULTS: In the comparison of CAD-CAM materials with 1 and 2-mm thicknesses, the highest radiopacity value was seen in LAVA Ultimate samples (2.67 ± 0.05 for 1 mm samples: 5.74 ± 0.13 for 2 mm samples). The lowest value in 1 mm samples was seen in IPS e.max (0.59 ± 0.07), and in 2 mm samples, in Cerec Blocs C samples (1.49 ± 0.11). The results showed that the radiopacity values of the samples were associated with increased thicknesses. The 2 mm samples' radiopacity values were statistically significantly higher compared with the 1 mm samples. All samples except IPS e.max CAD and Cerec Blocs C had higher radiopacity than dentin (P< 0.05). CLINICAL SIGNIFICANCE: The radiopacity values were affected by thickness and type of materials. Comprehensive knowledge about the radiopacity of materials enables the selection of appropriate materials to achieve clinical success, which serves as a useful diagnostic aid in determining the long-term durability of restorations.

[The value of restoration marginal fit as risk factor for pathological root resorption in primary teeth]. / Znachenie kraevogo prileganiya plombirovochnogo materiala k tverdym tkanyam vremennykh zubov dlya predotvrashcheniya patologicheskoi rezorbtsii kornei.

The presented clinical case describes the need for repetitive dental treatment in a child with pathological root resorption in all the primary molars after pulpotomy and composite resin restoration. Pathological resorption is of inflammatory origin in the majority of cases and an important risk factor for it is marginal leakage of the restoration. According to literature, the optimal restorative choice considering marginal fit are stainless steel pediatric crowns. Root resorption in the patient was asymptomatic. It proves the necessity for radiological control after treatment and 3, 6, 12, 24 months after it.