Mode of Action of Antimicrobial Potential Protease SH21 Derived from Bacillus siamensis.

Global public health is facing a major issue with emerging resistance to antimicrobial agents. Antimicrobial agents that are currently on the market are strong and efficient, but it has not been ruled out that these medications will eventually cause resistance to bacteria. Exploring novel bioactive compounds derived from natural sources is therefore, crucial to meet future demands. The present study evaluated the mode of action of the antimicrobial potential protease enzyme SH21. Protease SH21 exhibited antimicrobial activity, strong heat stability (up to 100 °C), and pH stability (pH 3.0 to 9.0). In terms of mode of action, we found that protease SH21 was able to disrupt the bacterial cell membrane as the results of the nucleotide leakage and cell membrane permeability assay. In addition, we also checked inner membrane permeability by PI uptake assay which suggested that protease SH21 has the ability to enter the bacterial cell membrane. Our results revealed that the antimicrobial protease SH21 might be a promising candidate for treating microbial infections.

An engineered enzyme embedded into PLA to make self-biodegradable plastic.

Plastic production reached 400 million tons in 2022 (ref. 1), with packaging and single-use plastics accounting for a substantial amount of this2. The resulting waste ends up in landfills, incineration or the environment, contributing to environmental pollution3. Shifting to biodegradable and compostable plastics is increasingly being considered as an efficient waste-management alternative4. Although polylactide (PLA) is the most widely used biosourced polymer5, its biodegradation rate under home-compost and soil conditions remains low6-8. Here we present a PLA-based plastic in which an optimized enzyme is embedded to ensure rapid biodegradation and compostability at room temperature, using a scalable industrial process. First, an 80-fold activity enhancement was achieved through structure-based rational engineering of a new hyperthermostable PLA hydrolase. Second, the enzyme was uniformly dispersed within the PLA matrix by means of a masterbatch-based melt extrusion process. The liquid enzyme formulation was incorporated in polycaprolactone, a low-melting-temperature polymer, through melt extrusion at 70 °C, forming an 'enzymated' polycaprolactone masterbatch. Masterbatch pellets were integrated into PLA by melt extrusion at 160 °C, producing an enzymated PLA film (0.02% w/w enzyme) that fully disintegrated under home-compost conditions within 20-24 weeks, meeting home-composting standards. The mechanical and degradation properties of the enzymated film were compatible with industrial packaging applications, and they remained intact during long-term storage. This innovative material not only opens new avenues for composters and biomethane production but also provides a feasible industrial solution for PLA degradation.

Bioremoval of tannins and heavy metals using immobilized tannase and biomass of Aspergillus glaucus.

BACKGROUND: The presence of inorganic pollutants and heavy metals in industrial effluents has become a serious threat and environmental issues. Fungi have a remarkable ability to exclude heavy metals from wastewater through biosorption in eco-friendly way. Tannase plays an important role in bioconversion of tannin, a major constituent of tannery effluent, to gallic acid which has great pharmaceutical applications. Therefore, the aim of the current study was to exploit the potential of tannase from Aspergillus glaucus and fungal biomass waste for the bioremediation of heavy metals and tannin. RESULTS: Tannase from A. glaucus was partially purified 4.8-fold by ammonium sulfate precipitation (80%). The enzyme was optimally active at pH 5.0 and 40 °C and stable at this temperature for 1 h. Tannase showed high stability at different physiological conditions, displayed about 50% of its activity at 60 °C and pH range 5.0-6.0. Immobilization of tannase was carried out using methods such. as entrapment in Na-alginate and covalent binding to chitosan. The effects of Na-alginate concentrations on the beads formation and enzyme immobilization revealed that maximum immobilization efficiency (75%) was obtained with 3% Na-alginate. A potential reusability of the immobilized enzyme was showed through keeping 70% of its relative activity up to the fourth cycle. The best bioconversion efficiency of tannic acid to gallic acid by immobilized tannase was at 40 °C with tannic acid concentration up to 50 g/l. Moreover, bioremediation of heavy metal (Cr3+, Pb2+, Cu2+, Fe3+, and Mn2+) from aqueous solution using A. glaucus biomass waste was achieved with uptake percentage of (37.20, 60.30, 55.27, 79.03 and 21.13 respectively). The biomass was successfully used repeatedly for removing Cr3+ after using desorbing agent (0.1 N HCl) for three cycles. CONCLUSION: These results shed the light on the potential use of tannase from locally isolated A. glaucus in the bioremediation of industrial tanneries contained heavy metals and tannin.

Streamlined screening of extracellularly expressed PETase libraries for improved polyethylene terephthalate degradation.

Enzyme-mediated polyethylene terephthalate (PET) depolymerization has recently emerged as a sustainable solution for PET recycling. Towards an industrial-scale implementation of this technology, various strategies are being explored to enhance PET depolymerization (PETase) activity and improve enzyme stability, expression, and purification processes. Recently, rational engineering of a known PET hydrolase (LCC-leaf compost cutinase) has resulted in the isolation of a variant harboring four-point mutations (LCC-ICCG), presenting increased PETase activity and thermal stability. Here, we revealed the enzyme's natural extracellular expression and used it to efficiently screen error-prone genetic libraries based on LCC-ICCG for enhanced activity toward consumer-grade PET. Following multiple rounds of mutagenesis and screening, we successfully isolated variants that exhibited up to a 60% increase in PETase activity. Among other mutations, the improved variants showed a histidine to tyrosine substitution at position 218, a residue known to be involved in substrate binding and stabilization. Introducing H218Y mutation on the background of LCC-ICCG (named here LCC-ICCG/H218Y) resulted in a similar level of activity improvement. Analysis of the solved structure of LCC-ICCG/H218Y compared to other known PETases featuring different amino acids at the equivalent position suggests that H218Y substitution promotes enhanced PETase activity. The expression and screening processes developed in this study can be further used to optimize additional enzymatic parameters crucial for efficient enzymatic degradation of consumer-grade PET.

Characterization of a thermostable protease from Bacillus subtilis BSP strain.

This study used conservative one variable-at-a-time study and statistical surface response methods to increase the yields of an extracellular thermostable protease secreted by a newly identified thermophilic Bacillus subtilis BSP strain. Using conventional optimization techniques, physical parameters in submerged fermentation were adjusted at the shake flask level to reach 184 U/mL. These physicochemical parameters were further optimized by statistical surface response methodology using Box Behnken design, and the protease yield increased to 295 U/mL. The protease was purified and characterized biochemically. Both Ca2+ and Fe2+ increased the activity of the 36 kDa protease enzyme. Based on its strong inhibition by ethylenediaminetetracetate (EDTA), the enzyme was confirmed to be a metalloprotease. The protease was also resistant to various organic solvents (benzene, ethanol, methanol), surfactants (Triton X-100), sodium dodecyl sulfate (SDS), Tween 20, Tween-80 and oxidants hydrogen per oxide (H2O2). Characteristics, such as tolerance to high SDS and H2O2 concentrations, indicate that this protease has potential applications in the pharmaceutical and detergent industries.

Catalytic Stability of S-1-(4-Hydroxyphenyl)-Ethanol Dehydrogenase from Aromatoleum aromaticum.

Derived from the denitrifying bacterium Aromatoleum aromaticum EbN1 (Azoarcus sp.), the enzyme S-1-(4-hydroxyphenyl)-ethanol dehydrogenase (S-HPED) belongs to the short-chain dehydrogenase/reductase family. Using research techniques like UV-Vis spectroscopy, dynamic light scattering, thermal-shift assay and HPLC, we investigated the catalytic and structural stability of S-HPED over a wide temperature range and within the pH range of 5.5 to 9.0 under storage and reaction conditions. The relationship between aggregation and inactivation of the enzyme in various pH environments was also examined and interpreted. At pH 9.0, where the enzyme exhibited no aggregation, we characterized thermally induced enzyme inactivation. Through isothermal and multitemperature analysis of inactivation data, we identified and confirmed the first-order inactivation mechanism under these pH conditions and determined the kinetic parameters of the inactivation process. Additionally, we report the positive impact of glucose as an enzyme stabilizer, which slows down the dynamics of S-HPED inactivation over a wide range of pH and temperature and limits enzyme aggregation. Besides characterizing the stability of S-HPED, the enzyme's catalytic activity and high stereospecificity for 10 prochiral carbonyl compounds were positively verified, thus expanding the spectrum of substrates reduced by S-HPED. Our research contributes to advancing knowledge about the biocatalytic potential of this catalyst.

Simultaneously Enhanced Catalytic Activity and Thermostability of a Baeyer-Villiger Monooxygenase from Oceanicola granulosus by Reshaping the Binding Pocket.

Enzymatic oxygenation of various cyclic ketones into lactones via Baeyer-Villiger monooxygenases (BVMOs) could provide a promising route for synthesizing fragrances and pharmaceutical ingredients. However, unsatisfactory catalytic activity and thermostability restricted their applications in the pharmaceutical and food industries. In this study, we successfully improved the catalytic activity and thermostability of a Baeyer-Villiger monooxygenase (OgBVMO) from Oceanicola granulosus by reshaping the binding pocket. As a result, mutant OgBVMO-Re displayed a 1.0- to 6.4-fold increase in the activity toward branched cyclic ketones tested, accompanied by a 3 °C higher melting point, and a 2-fold longer half-life time (t1/2 (45 °C)). Molecular dynamics simulations revealed that reshaping the binding pocket achieved strengthened motion correlation between amino acid residues, appropriate size of the substrate-binding pocket, beneficial surface characteristics, lower energy barriers, and shorter nucleophilic distance. This study well demonstrated the trade-off between the enzyme activity and thermostability by reshaping the substrate-binding pocket, paving the way for further engineering other enzymes.

Enhancing the stress resistance of nitrile hydratase from Rhodococcus ruber via SpyTag/SpyCatcher-mediated α- and ß- subunits ligation.

BACKGROUND: Nitrile Hydratase (NHase) is one of the most important industrial enzyme widely used in the petroleum exploitation field. The enzyme, composed of two unrelated α- and ß-subunits, catalyzes the conversion of acrylonitrile to acrylamide, releasing a significant amount of heat and generating the organic solvent product, acrylamide. Both the heat and acrylamide solvent have an impact on the structural stability of NHase and its catalytic activity. Therefore, enhancing the stress resistance of NHase to toxic substances is meaningful for the petroleum industry. METHODS AND RESULTS: To improve the thermo-stability and acrylamide tolerance of NHase, the two subunits were fused in vivo using SpyTag and SpyCatcher, which were attached to the termini of each subunit in various combinations. Analysis of the engineered strains showed that the C-terminus of ß-NHase is a better fusion site than the N-terminus, while the C-terminus of α-NHase is the most suitable site for fusion with a larger protein. Fusion of SpyTag and SpyCatcher to the C-terminus of ß-NHase and α-NHase, respectively, led to improved acrylamide tolerance and a slight enhancement in the thermo-stability of one of the engineered strains, NBSt. CONCLUSION: These results indicate that in vivo ligation of different subunits using SpyTag/SpyCatcher is a valuable strategy for enhancing subunit interaction and improving stress tolerance.

Characterization, Mechanism, and Application of Dipeptidyl Peptidase III: An Aflatoxin B1-Degrading Enzyme from Aspergillus terreus HNGD-TM15.

Aflatoxin B1 is a notorious mycotoxin with mutagenicity and carcinogenicity, posing a serious hazard to human and animal health. In this study, an AFB1-degrading dipeptidyl-peptidase III mining from Aspergillus terreus HNGD-TM15 (ADPP III) with a molecular weight of 79 kDa was identified. ADPP III exhibited optimal activity toward AFB1 at 40 °C and pH 7.0, maintaining over 80% relative activity at 80 °C. The key amino acid residues that affected enzyme activity were identified as H450, E451, H455, and E509 via bioinformatic analysis and site-directed mutagenesis. The degradation product of ADPP III toward AFB1 was verified to be AFD1. The zebrafish hepatotoxicity assay verified the toxicity of the AFB1 degradation product was significantly weaker than that of AFB1. The result of this study proved that ADPP III presented a promising prospect for industrial application in food and feed detoxification.

Single-Step Purification of Catalase Enzyme From Human Blood Erythrocytes Using Affinity Chromatography Technique.

In this study, we aimed to isolate and purify catalase from human blood erythrocytes by using a newly synthesized affinity gel. The synthesized ω-amino hexyl agarose-1,2,3-triazole-5-carboxylic acid affinity gel was analyzed by FT-IR. Then, different buffer, pH, and ionic strength parameters were optimized to determine the equilibration, washing, and elution buffer conditions. The catalase was purified from human blood erythrocytes with a specific activity of 45.58 EU/mg, purification fold of 529.50, and a yield of 0.416% using the synthesized new affinity gel. The purity and molecular weight of the enzyme were analyzed by SDS-PAGE, and a single band at 60 kDa was observed for catalase. The optimum reaction temperature of the catalase was found to be 30°C, while the thermal stability temperature was 60°C. The Km and Vmax of the enzyme for hydrogen peroxide were calculated at 0.125 mM and 2500 U mL-1, respectively.

Thermostabilization of a fungal laccase by entrapment in enzymatically synthesized levan nanoparticles.

In this work, we present a comprehensive investigation of the entrapment of laccase, a biotechnologically relevant enzyme, into levan-based nanoparticles (LNPs). The entrapment of laccase was achieved concomitantly with the synthesis of LNP, catalyzed by a truncated version of a levansucrase from Leuconostoc mesenteroides. The study aimed to obtain a biocompatible nanomaterial, able to entrap functional laccase, and characterize its physicochemical, kinetic and thermal stability properties. The experimental findings demonstrated that a colloidal stable solution of spherically shaped LNP, with an average diameter of 68 nm, was obtained. An uniform particle size distribution was observed, according to the polydispersity index determined by DLS. When the LNPs synthesis was performed in the presence of laccase, biocatalytically active nanoparticles with a 1.25-fold larger diameter (85 nm) were obtained, and a maximum load of 243 µg laccase per g of nanoparticle was achieved. The catalytic efficiency was 972 and 103 (µM·min)-1, respectively, for free and entrapped laccase. A decrease in kcat values (from 7050 min-1 to 1823 min-1) and an increase in apparent Km (from 7.25 µM to 17.73 µM) was observed for entrapped laccase, compared to the free enzyme. The entrapped laccase exhibited improved thermal stability, retaining 40% activity after 1 h-incubation at 70°C, compared to complete inactivation of free laccase under the same conditions, thereby highlighting the potential of LNPs in preserving enzyme activity under elevated temperatures. The outcomes of this investigation significantly contribute to the field of nanobiotechnology by expanding the applications of laccase and presenting an innovative strategy for enhancing enzyme stability through the utilization of fructan-based nanoparticle entrapments.

A hyperstable, low-salt adapted protease from halophilic archaeon with potential applications in salt-fermented foods.

Salt-tolerant proteases with remarkable stability are highly desirable biocatalysts in the salt-fermented food industry. In this study, the undigested autocleavage product of HlyA (halolysin A), a low-salt adapted halolysin from halophilic archaeon Halococcus salifodinae, was investigated. HlyA underwent autocleavage of its C-terminal extension (CTE) at temperatures over 40 °C or NaCl concentrations below 2 M to yield HlyAΔCTE. HlyAΔCTE demonstrated robust stability over a wide range of -20-60 °C, 0.5-4 M NaCl, and pH 6.0-10.0 for at least 72 h. Notably, HlyAΔCTE is the first reported halolysin with such exceptional stability. Compared with HlyA, HlyAΔCTE preferred high temperatures (50-75 °C), low salinities (0.5-2.5 M NaCl), and near-neutral (pH 6.5-8.0) conditions to achieve high activity, consistently with its production conditions. HlyAΔCTE displayed a higher Vmax value against azocasein than HlyA. During fish sauce fermentation, HlyAΔCTE significantly enhanced fish protein hydrolysis, indicating its potential as a robust biocatalyst in the salt-fermented food industry.

Use of ultrasound to improve the activity of cyclodextrin glycosyltransferase in the producing of ß-cyclodextrins: Impact on enzyme activity, stability and insights into changes on enzyme macrostructure.

This work explored the impact of ultrasound (US) on the activity, stability, and macrostructural conformation of cyclodextrin glycosyltransferase (CGTase) and how these changes could maximize the production of ß-cyclodextrins (ß-CDs). The results showed that ultrasonic pretreatment (20 kHz and 38 W/L) at pH 6.0 promoted increased enzymatic activity. Specifically, after sonication at 25 °C/30 min, there was a maximum activity increase of 93 % and 68 % when biocatalysis was carried out at 25 and 55 °C, respectively. For activity measured at 80 °C, maximum increase (31 %) was observed after sonication at 25 °C/60 min. Comparatively, US pretreatment at low pH (pH = 4.0) resulted in a lower activity increase (max. 28 %). These activation levels were maintained after 24 h of storage at 8 °C, suggesting that changes on CGTase after ultrasonic pretreatment were not transitory. These pretreatments altered the conformational structure of CGTase, revealed by an up to 11 % increase in intrinsic fluorescence intensity, and resulted in macrostructural modifications, such as a decrease in particle size and polydispersion index (up to 85 % and 45.8 %, respectively). Therefore, the sonication of CGTase under specific conditions of pH, time, and temperature (especially at pH 6.0/ 30 min/ 25 °C) promotes macrostructural changes in CGTase that induce enzyme activation and, consequently, higher production of ß-CDs.

Exploring Bacillus species xylanases for industrial applications: screening via thermostability and reaction modelling.

CONTEXT: Xylanases derived from Bacillus species hold significant importance in various large-scale production sectors, with increasing demand driven by biofuel production. However, despite their potential, the extreme environmental conditions often encountered in production settings have led to their underutilisation. To address this issue and enhance their efficacy under adverse conditions, we conducted a theoretical investigation on a group of five Bacillus species xylanases belonging to the glycoside hydrolase GH11 family. Bacillus sp. NCL 87-6-10 (sp_NCL 87-6-10) emerged as a potent candidate among the selected biocatalysts; this Bacillus strain exhibited high thermal stability and achieved a transition state with minimal energy requirements, thereby accelerating the biocatalytic reaction process. Our approach aims to provide support for experimentalists in the industrial sector, encouraging them to employ structural-based reaction modelling scrutinisation to predict the ability of targeted xylanases. METHODS: Utilising crystal structure data available in the Carbohydrate-Active enzymes database, we aimed to analyse their structural capabilities in terms of thermal-stability and activity. Our investigation into identifying the most prominent Bacillus species xylanases unfolds with the help of the semi-empirical quantum mechanics MOPAC method integrated with the DRIVER program is used in calculations of reaction pathways to understand the activation energy. Additionally, we scrutinised the selected xylanases using various analyses, including constrained network analyses, intermolecular interactions of the enzyme-substrate complex and molecular orbital assessments calculated using the AM1 method with the MO-G model (MO-G AM1) to validate their reactivity.

Efficient Expression and Application of a Modified Rhizomucor miehei Lipase for Simultaneous Production of Biodiesel and Eicosapentaenoic Acid Ethyl Ester from Nannochloropsis Oil.

Few reports exist on one-step enzymatic methods for the simultaneous production of biodiesel and eicosapentaenoic acid ethyl ester (EPA-EE), a high-value pharmaceutical compound. This study aimed to efficiently express Rhizomucor miehei lipase (pRML) in Pichia pastoris X-33 via propeptide mutation and high-copy strain screening. The mutated enzyme was then used to simultaneously catalyze the production of both biodiesel and EPA-EE. The P46N mutation in the propeptide (P46N-pRML) significantly boosted its production, with the four-copy strain increasing enzyme yield by 3.7-fold, reaching 3425 U/mL. Meanwhile, its optimal temperature increased to 45-50 °C, pH expanded to 7.0-8.0, specific activity doubled, Km reduced to one-third, and kcat/Km increased 7-fold. Notably, P46N-pRML efficiently converts Nannochloropsis gaditana oil's eicosapentaenoic acid (EPA). Under optimal conditions, it achieves up to 93% biodiesel and 92% EPA-EE yields in 9 h. Our study introduces a novel, efficient one-step green method to produce both biodiesel and EPA-EE using this advanced enzyme.

Optimization and Characterization of an Ultra-Thermostable, Acidophilic, Cellulase-Free Xylanase from a New Obligate Thermophilic Geobacillus thermoleovorans AKNT10 and its Application in Saccharification of Wheat Bran.

Microbial xylanases are enzymes of great importance due to their wide industrial applications, especially in the degradation of lignocellulosic biomass into fermentable sugars. This study aimed to describe the production optimization and partial characterization of an ultra-thermostable, acidophilic, cellulase-free xylanase from an obligate thermophilic eubacterium Geobacillus thermoleovorans strain-AKNT10 (Ac.No. LT158229) isolated from a hot-spring of Puga Valley located at an altitude of 4419 m in Ladakh, India. The optimization of cultural conditions improved enzyme yield by 10.49-fold under submerged fermentation. The addition of 1% (w/v) xylose induced the enzyme synthesis by ~ 165 and 371% when supplemented in the fermentation medium containing wheat bran (WB) 1 and 3%, respectively. The supplementation of sucrose reduced the xylanase production by ~ 25%. Results of partial characterization exhibited that xylanase was optimally active at pH 6.0 and 100 °C. Enzyme retained > 75%, > 83%, and > 84% of activity at 4 °C for 28 days, 100 °C for 60 min, and pHs 3-8 for 60 min, respectively. An outstanding property of AKNT10-xylanase, was the retention of > 71% residual activity at extreme conditions (121 °C and 15 psi pressure) for 15 min. Enzymatic saccharification showed that enzyme was also capable to liberate maximum reducing sugars within 4-8 h under optimized conditions thus it could be a potential candidate for the bioconversion of lignocellulosic biomass as well as other industrial purposes. To the best of our knowledge, this is the first report on such an ultra-thermo-pressure-tolerant xylanase optimally active at pH 6 and 100 °C from the genus Geobacillus.

Saturation Mutagenesis and Molecular Modeling: The Impact of Methionine 182 Substitutions on the Stability of ß-Lactamase TEM-1.

Serine ß-lactamase TEM-1 is the first ß-lactamase discovered and is still common in Gram-negative pathogens resistant to ß-lactam antibiotics. It hydrolyzes penicillins and cephalosporins of early generations. Some of the emerging TEM-1 variants with one or several amino acid substitutions have even broader substrate specificity and resistance to known covalent inhibitors. Key amino acid substitutions affect catalytic properties of the enzyme, and secondary mutations accompany them. The occurrence of the secondary mutation M182T, called a "global suppressor", has almost doubled over the last decade. Therefore, we performed saturating mutagenesis at position 182 of TEM-1 to determine the influence of this single amino acid substitution on the catalytic properties, thermal stability, and ability for thermoreactivation. Steady-state parameters for penicillin, cephalothin, and ceftazidime are similar for all TEM-1 M182X variants, whereas melting temperature and ability to reactivate after incubation at a higher temperature vary significantly. The effects are multidirectional and depend on the particular amino acid at position 182. The M182E variant of ß-lactamase TEM-1 demonstrates the highest residual enzymatic activity, which is 1.5 times higher than for the wild-type enzyme. The 3D structure of the side chain of residue 182 is of particular importance as observed from the comparison of the M182I and M182L variants of TEM-1. Both of these amino acid residues have hydrophobic side chains of similar size, but their residual activity differs by three-fold. Molecular dynamic simulations add a mechanistic explanation for this phenomenon. The important structural element is the V159-R65-E177 triad that exists due to both electrostatic and hydrophobic interactions. Amino acid substitutions that disturb this triad lead to a decrease in the ability of the ß-lactamase to be reactivated.

Recombinant Expression and Characterization of a Novel Thermo-Alkaline Lipase with Increased Solvent Stability from the Antarctic Thermophilic Bacterium Geobacillus sp. ID17.

Lipases are enzymes that hydrolyze long-chain carboxylic esters, and in the presence of organic solvents, they catalyze organic synthesis reactions. However, the use of solvents in these processes often results in enzyme denaturation, leading to a reduction in enzymatic activity. Consequently, there is significant interest in identifying new lipases that are resistant to denaturing conditions, with extremozymes emerging as promising candidates for this purpose. Lip7, a lipase from Geobacillus sp. ID17, a thermophilic microorganism isolated from Deception Island, Antarctica, was recombinantly expressed in E. coli C41 (DE3) in functional soluble form. Its purification was achieved with 96% purity and 23% yield. Enzymatic characterization revealed Lip7 to be a thermo-alkaline enzyme, reaching a maximum rate of 3350 U mg-1 at 50 °C and pH 11.0, using p-nitrophenyl laurate substrate. Notably, its kinetics displayed a sigmoidal behavior, with a higher kinetic efficiency (kcat/Km) for substrates of 12-carbon atom chain. In terms of thermal stability, Lip7 demonstrates stability up to 60 °C at pH 8.0 and up to 50 °C at pH 11.0. Remarkably, it showed high stability in the presence of organic solvents, and under certain conditions even exhibited enzymatic activation, reaching up to 2.5-fold and 1.35-fold after incubation in 50% v/v ethanol and 70% v/v isopropanol, respectively. Lip7 represents one of the first lipases from the bacterial subfamily I.5 and genus Geobacillus with activity and stability at pH 11.0. Its compatibility with organic solvents makes it a compelling candidate for future research in biocatalysis and various biotechnological applications.

Engineering of Methionine Adenosyltransferase toward Mitigated Product Inhibition for Efficient Production of S-Adenosylmethionine.

S-Adenosylmethionine (SAM) is a crucial metabolic intermediate playing irreplaceable roles in organismal activities. However, the synthesis of SAM by methionine adenosyltransferase (MAT) is hindered by low conversion due to severe product inhibition. Herein structure-guided semirational engineering was conducted on MAT from Escherichia coli (EcMAT) to mitigate the product inhibitory effect. Compared with the wild-type EcMAT, the best variant E56Q/Q105R exhibited an 8.13-fold increase in half maximal inhibitory concentration and a 4.46-fold increase in conversion (150 mM ATP and l-methionine), leading to a SAM titer of 47.02 g/L. Another variant, E56N/Q105R, showed superior thermostability with an impressive 85.30-fold increase in half-life (50 °C) value. Furthermore, molecular dynamics (MD) simulation results demonstrate that the alleviation in product inhibitory effect could be attributed to facilitated product release. This study offers molecular insights into the mitigated product inhibition, and provides valuable guidance for engineering MAT toward enhanced catalytic performance.

Solvent Tolerance Improvement of Lipases Enhanced Their Applications: State of the Art.

Lipases, crucial catalysts in biochemical synthesis, find extensive applications across industries such as food, medicine, and cosmetics. The efficiency of lipase-catalyzed reactions is significantly influenced by the choice of solvents. Polar organic solvents often result in a decrease, or even loss, of lipase activity. Conversely, nonpolar organic solvents induce excessive rigidity in lipases, thereby affecting their activity. While the advent of new solvents like ionic liquids and deep eutectic solvents has somewhat improved the activity and stability of lipases, it fails to address the fundamental issue of lipases' poor solvent tolerance. Hence, the rational design of lipases for enhanced solvent tolerance can significantly boost their industrial performance. This review provides a comprehensive summary of the structural characteristics and properties of lipases in various solvent systems and emphasizes various strategies of protein engineering for non-aqueous media to improve lipases' solvent tolerance. This study provides a theoretical foundation for further enhancing the solvent tolerance and industrial properties of lipases.