A carbon dot-based time-dependent color-changing room temperature phosphorescent material with facile synthesis.

Carbon dots have attracted widespread attention due to their excellent optical properties and so on and are therefore used in various fields such as anti-counterfeiting. There are many reports on carbon dot-based room-temperature phosphorescent materials, but there are still fewer reports on carbon dot-based room-temperature phosphorescent materials with time-dependent color-changing properties. In this work, a time-dependent color-changing carbon dot-based room-temperature phosphorescent material with the ability to change from green to blue was successfully prepared by a simple one-pot heating method using hydroxyurea as the only raw material. In this process, hydroxyurea is used as both a carbon and nitrogen source, and in the process of material formation, hydroxyurea also partially forms cyanuric acid as a matrix to make the carbon dots uniformly dispersed in it. By blending the ratio of the dual emission centers of the carbon dots themselves, the final effect of time-dependent color-changing is achieved by taking advantage of the intensity changes and color differences of each emission center. The present work provides new ideas for the preparation of time-dependent color-changing carbon dot-based room-temperature phosphorescent materials.

Demystification of luminescence properties and the near imperceptible thermal quenching of Sm3+-doped tungstate phosphors.

Ultra-high thermally stable Ca2MgWO6:xSm3+ (x = 0.5, 0.75, 1, 1.25, and 1.5 mol%) double perovskite phosphors were synthesized through solid-state reaction method. Product formation was confirmed by comparing the X-ray diffraction (XRD) patterns of the phosphors with the standard reference file. The structural, morphological, thermal, and optical properties of the prepared phosphor were examined in detail using XRD, Fourier transform infrared spectra, scanning electron microscopy, diffused reflectance spectra, thermogravimetric analysis (TGA), photoluminescence emission, and temperature-dependent PLE (TDPL). It was seen that the phosphor exhibited emission in the reddish region for the near-ultraviolet excitation with moderate Colour Rendering Index values and high colour purity. The optimized phosphor (x = 1.25 mol%) was found to possess a direct optical band gap of 3.31 eV. TGA studies showed the astonishing thermal stability of the optimized phosphor. Additionally, near-zero thermal quenching was seen in TDPL due to elevated phonon-assisted radiative transition. Furthermore, the anti-Stokes and Stokes emission peaks were found to be sensitive toward the temperature change and followed a Boltzmann-type distribution. All these marked properties will make the prepared phosphors a suitable candidate for multifield applications and a fascinating material for further development.

Bioluminescence Imaging of Potassium Ion Using a Sensory Luciferin and an Engineered Luciferase.

Bioluminescent indicators are power tools for studying dynamic biological processes. In this study, we present the generation of novel bioluminescent indicators by modifying the luciferin molecule with an analyte-binding moiety. Specifically, we have successfully developed the first bioluminescent indicator for potassium ions (K+), which are critical electrolytes in biological systems. Our approach involved the design and synthesis of a K+-binding luciferin named potassiorin. Additionally, we engineered a luciferase enzyme called BRIPO (bioluminescent red indicator for potassium) to work synergistically with potassiorin, resulting in optimized K+-dependent bioluminescence responses. Through extensive validation in cell lines, primary neurons, and live mice, we demonstrated the efficacy of this new tool for detecting K+. Our research demonstrates an innovative concept of incorporating sensory moieties into luciferins to modulate luciferase activity. This approach has great potential for developing a wide range of bioluminescent indicators, advancing bioluminescence imaging (BLI), and enabling the study of various analytes in biological systems.

Fe3+-activated magnetoplumbite persistent luminescence phosphor by modulating the oxygen vacancy.

Broadband near-infrared (NIR) spectroscopy has gained significant attention due to its versatile application in various fields. In the realm of NIR phosphors, Fe3+ ion is an excellent activator known for its nontoxic and harmless nature. In this study, we prepared an Fe3+-activated SrGa12O19 (SGO) NIR phosphor and analyzed its phase and luminescence properties. Upon excitation at 326 nm, the SGO:Fe3+ phosphor exhibited a broadband emission in the range 700-1000 nm, peaking at 816 nm. The optical band gap of SGO:Fe3+ was evaluated. To enhance the long-lasting phosphorescence, an oxygen vacancy-rich SGO:Fe3+ (VO-SGO:Fe3+) sample was prepared for activation. Interestingly, the increase in the oxygen-vacancy concentration indeed contributed to the activation of persistent luminescence of Fe3+ ions. The VO-SGO:Fe3+ sample has a long duration and high charge storage capacity, allowing it to perform efficiently in various applications. This work provides the foundation for further design of Cr3+-free PersL phosphors with efficient NIR PersL.

Effect of luminescent materials on the aquatic macrophyte Vallisneria natans and periphytic biofilm.

Luminescent materials can adjust the spectrum of light energy utilization by plants. However, current research on the effects of luminescent materials on aquatic plants and periphytic biofilms is limited. This study investigated the effects of the luminescent materials 4-(di-p-tolylamino) benzaldehyde-A (DTB-A) and 4-(di-p-tolylamino) benzaldehyde-M (DTB-M) on the submerged macrophyte Vallisneria natans (V. natans) and periphytic biofilm. Result demonstrated that low concentrations of DTB (0.1 µM) significantly promoted the growth and photosynthetic rate of V. natans. In terms of enzyme activity, exposure to a higher concentration of DTB (10 µM) increased the activities of peroxidase (POD), superoxide dismutase (SOD) and catalase (CAT). A combination of DTB-A and DTB-M treatment significantly changed the V. natans morphology and physiological characteristics, reducing the thickness of the cell wall and subsequently, promoting protein accumulation in leaves. There was no difference in the removal of ammonia or phosphate by V. natans at the 0.1 µM concentration, and the removal of ammonia and phosphate by V. natans decreased significantly as the concentration of luminescent material increased. A total of 3563 OTUs were identified in the biofilm community. The microbial community was dominated by Pseudomonas and Fusobacteria. Furthermore, results showed that an obvious decrease in diversity in the DTB-A and DTB-M mixed treatment group. In addition, the migratory aggregation of DTB molecules in plants was observed by fluorescence imaging. Overall, these findings extend our understanding of the mechanism of effect of luminescent materials on submerged macrophytes and their periphytic microorganisms.

A strategy to enhance the water solubility of luminescent ß-diketonate-Europium(III) complexes for time-gated luminescence bioassays.

Luminescent ß-diketonate-europium(III) complexes have been found a wide range of applications in time-gated luminescence (TGL) bioassays, but their poor water solubility is a main problem that limits their effective uses. In this work we propose a simple and general strategy to enhance the water solubility of luminescent ß-diketonate-europium(III) complexes that permits facile synthesis and purification. By introducing the fluorinated carboxylic acid group into the structures of ß-diketone ligands, two highly water-soluble and luminescent Eu3+ complexes, PBBHD-Eu3+ and CPBBHD-Eu3+, were designed and synthesized. An excellent solubility exceeding 20 mg/mL for PBBHD-Eu3+ was found in a pure aqueous buffer, while it also displayed strong and long-lived luminescence (quantum yield φ = 26%, lifetime τ = 0.49 ms). After the carboxyl groups of PBBHD-Eu3+ were activated, the PBBHD-Eu3+-labeled streptavidin-bovine serum albumin (SA-BSA) conjugate was prepared, and successfully used for the immunoassay of human α-fetoprotein (AFP) and the imaging of an environmental pathogen Giardia lamblia under TGL mode, which demonstrated the practicability of PBBHD-Eu3+ for highly sensitive TGL bioassays. The carboxyl groups of PBBHD can also be easily derivatized with other reactive chemical groups, which enables PBBHD-Eu3+ to meet diverse requirements of biolabeling technique, to provide new opportunities for developing functional europium(III) complex biolabels serving for TGL bioassays.

Construction of self-enhanced luminescence probes based on Ti3C2 reducibility for ultrasensitive PNK analysis.

Au nano-clusters (Au NCs) were promising electrochemiluminescence (ECL) nano-materials. However, the small size of Au NCs presented a challenge in terms of their immobilization during the construction of an ECL biosensing platform. This limitation significantly hindered the wider application of Au NCs in the ECL field. In this work, we successfully used the reducibility of Ti3C2 to fabricate in situ a self-enhanced nano-probe Ti3C2-TiO2-Au NCs. The strategy of in situ generation not only improved the immobilization of Au NCs on the probe but also eliminated the requirement of adding reducing agents during preparation. In addition, in situ generated TiO2 could serve as a co-reaction accelerator, shortening the electron transfer distance between S2O82- and Au NCs, thereby improving the utilization of intermediates and enhancing the ECL response of Au NCs. The constructed ECL sensing platform could achieve sensitive detection of polynucleotide kinase (PNK). At the same time, the 5'-end phosphate group of DNA phosphorylation could chelate with a large amount of Ti on the surface of Ti3C2, thereby achieving the goal of specific detection of PNK. The sensor based on self-enhanced ECL probes had a broad dynamic range spanning for PNK detection from 10.0 to 1.0 × 107 µU mL-1, with a limit of detection of 1.6 µU mL-1. Moreover, the ECL sensor showed satisfactory detection performance in HeLa cell lysate and serum. This study not only provided insights for addressing the issue of ECL luminescence efficiency in Au NCs but also presented novel concepts for ECL self-enhancement strategies.

Photoluminescence properties of Pb5(PO4)3Br:RE (RE = Dy3+, Eu3+ and Tb3+) phosphor synthesised using solid-state method.

This study describes the luminous properties of Pb5(PO4)3Br doped with RE3+ (RE = Dy3+, Eu3+ and Tb3+) synthesised using the solid-state method. The synthesised phosphor was characterised using Fourier-transform infrared, X-ray diffraction, scanning electron microscopy and photoluminescence measurements. Dy3+-doped Pb5(PO4)3Br phosphor exhibited blue and yellow emissions at 480 and 573 nm, respectively, on excitation at 388 nm. Eu3+-doped Pb5(PO4)3Br phosphor exhibited orange and red emissions at 591 and 614 nm, respectively, on excitation at λex = 396 nm. Pb5(PO4)3Br:Tb3+ phosphor exhibited the strongest green emission at 547 nm on excitation at λex = 380 nm. Additionally, the effect of the concentration of rare-earth ions on the emission intensity of Pb5(PO4)3Br:RE3+ (RE3+ = Dy3+, Eu3+ and Tb3+) phosphors was investigated.

A Water-Soluble Wavy Coordination Polymer of Cu(II) as a Turn-On Luminescent Probe for Histidine and Histidine-Rich Proteins/Peptides.

Histidine plays an essential role in most biological systems. Changes in the homeostasis of histidine and histidine-rich proteins are connected to several diseases. Herein, we report a water-soluble Cu(II) coordination polymer, labeled CuCP, for the fluorimetric detection of histidine and histidine-rich proteins and peptides. Single-crystal structure determination of CuCP revealed a two-dimensional wavy network structure in which a carboxylate group connects the individual Cu(II) dimer unit in a syn-anti conformation. The weakly luminescent and water-soluble CuCP shows turn-on blue emission in the presence of histidine and histidine-rich peptides and proteins. The polymer can also stain histidine-rich proteins via gel electrophoresis. The limits of quantifications for histidine, glycine-histidine, serine-histidine, human serum albumin (HSA), bovine serum albumin, pepsin, trypsin, and lysozyme were found to be 300, 160, 600, 300, 600, 800, 120, and 290 nM, respectively. Utilizing the fluorescence turn-on property of CuCP, we measured HSA quantitatively in the urine samples. We also validated the present urinary HSA measurement assay with existing analytical techniques. Job's plot, 1H NMR, high-resolution mass spectrometry (HRMS), electron paramagnetic resonance (EPR), fluorescence, and UV-vis studies confirmed the ligand displacement from CuCP in the presence of histidine.

Visualization of Endogenous Hypochlorite in Drug-Induced Liver Injury Mice via a Bioluminescent Probe Combined with Firefly Luciferase mRNA-Loaded Lipid Nanoparticles.

Drug-induced liver injury (DILI) is a common liver disease with a high rate of morbidity, and its pathogenesis is closely associated with the overproduction of highly reactive hypochlorite (ClO-) in the liver. However, bioluminescence imaging of endogenous hypochlorite in nontransgenic natural mice remains challenging. Herein, to address this issue, we report a strategy for imaging ClO- in living cells and DILI mice by harnessing a bioluminescent probe formylhydrazine luciferin (ClO-Luc) combined with firefly luciferase (fLuc) mRNA-loaded lipid nanoparticles (LNPs). LNPs could efficiently deliver fLuc mRNA into living cells and in vivo, expressing abundant luciferase in the cytoplasm in situ. In the presence of ClO-, probe ClO-Luc locked by formylhydrazine could release cage-free d-luciferin through oxidation and follow-up hydrolysis reactions, further allowing for bioluminescence imaging. Moreover, based on the luciferase-luciferin system, it was able to sensitively and selectively detect ClO- in vitro with a limit of detection of 0.59 µM and successfully monitor the endogenous hypochlorite generation in the DILI mouse model for the first time. We postulate that this work provides a new method to elucidate the roles of ClO- in related diseases via bioluminescence imaging.

Optical properties of blue-light-emitting Y2 O3 :Ce nanophosphor for solid-state lighting application.

The structural, surface morphological, optical absorption and emission features of Y2 O3 :Ce (0%-5%) were studied. The samples had a body-centred cubic crystal structure. The undoped sample had a crystallite size of 29.03 nm, and it varied after doping with Ce. The grain size of the samples varied from 23.00 to 50.78 nm. All the samples exhibited a strong absorption band at 206 nm due to F-centre absorption and absorption involving the delocalised bands. In addition, the doped samples exhibited a secondary band at ~250 nm due to 4f → 5d transitions of Ce3+ ions. The optical bandgap of the undoped sample was found to be ~5.37 eV, and it decreased to 5.20 eV with an increase in Ce concentration to 5%. The undoped sample under 350-nm excitation exhibited a broad photoluminescence (PL) emission band with the maxima at 406 nm and a secondary band at 463 nm. In contrast, multiple PL peaks were centred at ~397, 436, 466, 488 and 563 nm in all the doped samples. The average lifetime of the emission band at 406 nm was 1.05 ns and that of the emission band at ~466 nm was 1.63 ns. The material has potential for solid-state lighting applications.

Ho3+ -doped BaGd2 ZnO5 green-emitting phosphor for solid-state lighting: synthesis, characterization, and photoluminescence properties.

In this work, we present the synthesis of a green-emitting series of BaGd2 ZnO5 :xHo3+ (0.5-3 mol%) phosphors using a high-temperature solid-state reaction method. Phase purity and crystal structure information were evaluated through X-ray powder diffraction patterns. Optical properties were examined through diffuse reflectance spectra, revealing that the prepared phosphor exhibited a band gap of 4.65 eV. The effect of Ho3+ doping on the morphology and ion distribution on the surface was assessed using scanning electron microscopy and time-of-flight secondary ion mass spectrometry techniques, respectively. The excitation spectra of the synthesized phosphor exhibited a charge transfer band and strong absorption transitions. The emission spectra displayed typical holmium emission characteristics, featuring a strong green emission band associated with f-f transitions from 5 F4 + 2 S2 → 5 I8 . Decay dynamics of the synthesized phosphor exhibited a single-exponential decay pattern, with lifetimes ranging from 0.103 to 0.053 ms. The intrinsic radiative lifetime, calculated through Auzel's fitting was determined to be 0.14 ms. Using the emission spectra, colorimetric behaviour was analyzed, revealing that the Commission Internationale de l'éclairage (CIE) coordinates exclusively lay within the green region at (0.285, 0.705), with an impressive colour purity of 99.6%. Given these marked properties, the synthesized phosphor exhibits great potential for a wide range of green-emitting applications, including displays, white light-emitting diodes, and security signage.

A Tandem-Locked Chemiluminescent Probe for Imaging of Tumor-Associated Macrophage Polarization.

Tumor-associated macrophages (TAMs) play a role in both pro- and anti-tumor functions; and the targeted polarization from M2 to M1 TAMs has become an effective therapy option. Although detection of M1 TAMs is imperative to assess cancer immunotherapeutic efficacy, existing optical probes suffer from shallow tissue penetration depth and poor specificity toward M1 TAMs. Herein, we report a tandem-locked NIR chemiluminescent (CL) probe for specific detection of M1 TAMs. Through a combined molecular engineering approach via both atomic alternation and introduction of electron-withdrawing groups, near-infrared (NIR) chemiluminophores are screened out to possess record-long emission (over 800 nm), record-high CL quantum yield (2.7 % einstein/mol), and prolonged half-life (7.7 h). Based on an ideal chemiluminophore, the tandem-locked probe (DPDGN) is developed to only activate CL signal in the presence of both tumour (γ-glutamyl transpeptidase) and M1 macrophage biomarkers (nitric oxide). Such a tandem-lock design ensures its high specificity towards M1 macrophages in the tumor microenvironment over those in normal tissues or peripheral blood. Thus, DPDGN permits noninvasive imaging and tracking of M1 TAM in the tumor of living mice during R837 treatment, showing a good correlation with ex vivo methods. This study not only reports a new molecular approach towards highly efficient chemiluminophores but also reveals the first tandem-locked CL probes for enhanced imaging specificity.

Dual-Emissive Iridium(III) Complexes and Their Applications in Biological Sensing and Imaging.

Phosphorescent iridium(III) complexes are widely recognized for their unique properties in the excited triplet state, making them crucial for various applications including biological sensing and imaging. Most of these complexes display single phosphorescence emission from the lowest-lying triplet state after undergoing highly efficient intersystem crossing (ISC) and ultrafast internal conversion (IC) processes. However, in cases where these excited-state processes are restricted, the less common phenomenon of dual emission has been observed. This dual emission phenomenon presents an opportunity for developing biological probes and imaging agents with multiple emission bands of different wavelengths. Compared to intensity-based biosensing, where the existence and concentration of an analyte are indicated by the brightness of the probe, the emission profile response involves modifications in emission color. This enables quantification by utilizing the intensity ratio of different wavelengths, which is self-calibrating and unaffected by the probe concentration and excitation laser power. Moreover, dual-emissive probes have the potential to demonstrate distinct responses to multiple analytes at separate wavelengths, providing orthogonal detection capabilities. In this concept, we focus on iridium(III) complexes displaying fluorescence-phosphorescence or phosphorescence-phosphorescence dual emission, along with their applications as biological probes for sensing and imaging.

Unravelling the interplay of local structure and valence transitions in Ce-doped CaYAlO4 luminescent materials.

Cerium has been widely used as a dopant in luminescent materials due to its unique electronic configurations. It is generally anticipated that the luminescence properties of rare-earth-doped materials are closely related to the local environment of activators, especially for Ce3+ . In addition, it is convenient to modulate its emission wavelength by adjusting the composition and structure. In this study, we systematically analyzed the microstructure of the Ce-doped CaYAlO4 system at atomic resolution. The quantitive results indicated that the structure distortion greatly influenced the valence state of the Ce dopant, which is critical to its luminescence efficiency. In addition, valence variations also exist from surface to inner structure due to the big distortion area around the surface. Our results unravel the interplay of local structure and valence transitions in Ce-doped aluminate phosphors, which has the potential to be applied in other luminescent materials.

Intense green light emission in Sr2 ZnGe2 O7 :Mn2+ phosphors by the design of high symmetry melilite structure.

A green phosphor Sr2 ZnGe2 O7 :Mn2+ with a melilite structure was prepared using a high-temperature solid-state reaction. When the 535 nm emission was monitored, the excitation spectrum of the Sr2 ZnGe2 O7 :Mn2+ was found to contain two excitation bands in the ultraviolet (UV) region. When excited by UV light, the sample shows bright green emission at 535 nm, which corresponds to the distinctive transition of Mn2+ (4 T1 →6 A1 ). Moreover, the quantum efficiency of Sr2 ZnGe2 O7 :Mn2+ could reach 67.6%. Finally, a high-performance white-light-emitting diode (WLED) with a low correlated colour temperature of 4632 K and a high colour rendering index (CRI) of 92.3 were packaged by coating commercial blue and red phosphors with an optimized Sr2 ZnGe2 O7 :Mn2+ sample on a 310 nm UV chip. This indicated that Sr2 ZnGe2 O7 :Mn2+ has the potential application as a green component in the WLED lighting field.

Optical analysis of RE3+ (RE = Eu,Tb):MgLa2 V2 O9 nano-phosphors.

Red and green rare-earth ion (RE3+ ) (RE = Eu, Tb):MgLa2 V2 O9 micro-powder phosphors were produced utilizing a standard solid-state chemical process. The X-ray diffraction examination performed on the phosphors showed that they were crystalline and had a monoclinic structure. The particles grouped together, as shown in the scanning electron microscopy (SEM) images. Powder phosphors were examined using a variety of spectroscopic techniques, including photoluminescence (PL), Fourier-transform infrared, and energy dispersive X-ray spectroscopy. Brilliant red emission at 615 nm (5 D0  â†’ 7 F2 ) having an excitation wavelength (λexci ) of 396 nm (7 F0  â†’ 5 L6 ) and green emission at 545 nm (5 D4  â†’ 7 F5 ) having an λexci  = 316 nm (5 D4  â†’ 7 F2 ) have both been seen in the emission spectra of Tb3+ :MgLa2 V2 O9 nano-phosphors. The emission mechanism that is raised in Eu3+ :MgLa2 V2 O9 and Tb3+ :MgLa2 V2 O9 powder phosphors has been explained in an energy level diagram.

Recent advancements of fluorescent tin(IV) complexes in biomedical molecular imaging.

In the last few years, tin(IV) complexes have emerged as very attractive candidates in the field of molecular imaging due to their unique photophysical properties. Despite the few reviews published to date covering the chemistry of organotin and tin complexes and their cytotoxic potential, there are no reviews devoted to their live cell imaging properties. Therefore, this feature article summarizes the discussion of the fundamental photophysical properties of fluorescent tin metal complexes focusing on their recent advances in "biomedical molecular imaging". A debate on the design of tin complexes as cellular imaging agents relating to their chemical, electronic and photophysical properties is enclosed. This paper also discusses the imaging applications of tin complexes in cells, tissues, and organisms via confocal and multiphoton imaging for sensing mechanisms in cellular media, bioimaging, and therapeutic labeling. In addition, it explores and explains the current challenges and prospects associated with these tin complexes as emerging luminescent cellular agents for potential clinical use.

Structural, morphological, and photoluminescence properties of RE (RE = Dy3+ , Eu3+ , Sm3+ )-doped CaAlBO4 phosphor synthesized by combustion method.

The CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor were prepared via combustion synthesis and studied by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectra and CIE coordinates. The phase formation of the obtained phosphor was analyzed by XRD and the result was confirmed by standard PDF Card No. 1539083. XRD data successfully indicated pure phase of CaAlBO4 phosphor. The crystal structure of CaAlBO4 phosphor is orthorhombic with space group Ccc2 (37). The SEM image of CaAlBO4 phosphor reveals an agglomerated morphology and non-uniform particle size. The EDS image provides evidence of the elements present and the chemical makeup of the materials. Under the 350 nm excitation, the emission spectrum of Dy3+ activated CaAlBO4 phosphor consists of two main groups of characteristic peaks located at 484 and 577 nm which are ascribed to 4 F9/2 → 6 H15/2 and 4 F9/2 → 6 H13/2 transition of Dy3+ respectively. The PL emission spectra of CaAlBO4 :Eu3+ phosphor shows characteristics bands observed around 591 and 613 nm, which corresponds to 5 D0 → 7 F1 and 5 D0 → 7 F2 transition of Eu3+ respectively, upon 395 nm excitation wavelength. The emission spectra of Sm3+ activated CaAlBO4 phosphor shows three characteristic bands observed at 565, 601 and 648 nm which emits yellow, orange and red color. The prominent emission peak at the wavelength 601 nm, which is attributed to 4 G5/2 → 6 H7/2 transition, displays an orange emission. The CIE color coordinates of CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor are calculated to be (0.631, 0.368), (0.674, 0.325) and (0.073, 0.185). As per the obtained results, CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor may be applicable in eco-friendly lightning technology.

Aggregation-Induced Emission (AIE), Life and Health.

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.