Plasmonic distributed feedback lasing in an anodic aluminum oxide/silver/polymer hybrid membrane.

ABSTRACT

A hybrid membrane is employed as a high-order plasmonic distributed feedback (DFB) cavity to reduce the lasing threshold of polymer lasers. The hybrid membrane consists of an anodic aluminum oxide (AAO) membrane, a 25 nm thick silver layer and a free-standing polymer membrane. The AAO membrane is fabricated by a low-cost, single chemical etching method. Then, a layer of silver with a thickness of 25 nm is sputtered on the surface of the AAO. Subsequently, a polymer membrane is directly attached to the silver-plated AAO membrane, forming an AAO/silver/polymer hybrid membrane. Under optical pumping conditions, low-threshold, three-order DFB lasing is observed. The proposed laser device exhibited a dual-threshold characteristic because of the evolution from amplified spontaneous emission to DFB lasing. And a significant shift from omnidirectional emission to directional emission lasing can be observed while the pump energy density is beyond the second threshold. Furthermore, the plasmonic enhancement sourced from silver corrugation reveals important improvement effects to the DFB lasing of AAO/silver/polymer hybrid membrane for decreasing threshold, narrowing full width at half maximum (FWHM), and an increasing Q factor. This work may promote the design and production of low-cost and large-area high-order plasmonic DFB polymer lasers.