Synthesis of MnOOH and its application in a supporting hexagonal Pd/C catalyst for the oxygen reduction reaction.

ABSTRACT

With the expansion of global energy problems and the deepening of research on oxygen reduction reaction (ORR) in alkaline media, the development of low cost and high electrocatalytic performance catalysts has become a research hotspot. In this study, a hexagonal Pd-C-MnOOH composite catalyst was prepared by using the triblock copolymer P123 as the reducing agent and protective agent, sucrose as the carbon source and self-made MnOOH as the carrier under hydrothermal conditions. When the Pd load is 20% and the C/MnOOH ratio is 1 1, the 20% Pd-C-MnOOH-1 1 catalyst obtained by the one-step method has the highest ORR activity and stability in the alkaline system. At 1600 rpm, the limiting diffusion current density and half-wave potential of the 20% Pd-C-MnOOH-1 1 electrocatalyst are -4.78 mA cm-2 and 0.84 V, respectively, which are better than those of the commercial 20%Pd/C catalyst. According to the Koutecky-Levich (K-L) equation and the linear fitting results, the electron transfer number of the 20%Pd-C-MnOOH-1 1 electrocatalyst for the oxygen reduction reaction is 3.8, which is similar to that of a 4-electron process. After 1000 cycles, the limiting diffusion current density of the 20%Pd-C-MnOOH-1 1 catalyst is -4.61 mA cm-2, which only decreases by 3.7%, indicating that the 20%Pd-C-MnOOH-1 1 catalyst has good stability. The reason for the improvement of the ORR performance of the Pd-C-MnOOH composite catalyst is the improvement of the conductivity of the carbon layer formed by original carbonization, the regular hexagonal highly active Pd particles and the synergistic catalytic effect between Pd and MnOOH. The method of introducing triblock copolymers in the synthesis of oxides and metal-oxide composite catalysts is expected to be extended to other electrocatalysis fields.