Hydrostatic bearing groove multi-objective optimization of the gear ring housing interface in a straight-line conjugate internal meshing gear pump.

ABSTRACT

The lubrication performance of a straight-line conjugate internal meshing gear pump is poor under the low-speed, high-pressure operating conditions of the volumetric servo speed control system, and it is difficult to establish a full fluid lubricating oil film between the gear ring and the housing. This leads to significant wear and severe heating between the gear ring and the housing. The lubrication performance of the interface moving pair of the electro-hydraulic actuator pump gear ring housing can be improved by designing a reasonable lubrication bearing structure for the gear ring housing. In this study, a multi-field coupling multi-objective optimization model was established to improve lubrication performance and volumetric efficiency. The whole model consists of the dynamic model of the gear ring components, the fluid lubrication model of the gear ring housing interface, the oil film formation and sealing model considering the influence of temperature, and the multi-objective optimization model. The comprehensive performance of the straight-line conjugate internal meshing gear pump was verified experimentally using a test bench. The results show that the lubrication performance is improved, the mechanical loss is reduced by 31.52%, and the volumetric efficiency is increased by 4.91%.