Optimization of fracturing technology for unconventional dense oil reservoirs based on rock brittleness index.

ABSTRACT

The concept of volume fracturing has revolutionized the conventional limits of low permeability, expanded the effective resource space, and significantly enhanced oil well production in tight oil reservoir development. This paper elucidates the mechanism of volume fracturing technology for tight sandstone reservoirs by considering multiple factors such as the initiation range of multi-fractures, influence of far-well horizontal principal stress on fracture initiation and propagation, degree of natural fractures development, and mechanical parameters of reservoir rock. Through simulation based on the mechanical parameters of reservoir rock, a comparative analysis was conducted between the model-calculated rock fracture pressure value and measured data from fracturing construction wells in the study area. The results revealed that there was a discrepancy within 10% between the model calculations and actual data. By simulating the effects of different injection volumes of fracturing fluid, pumping rates, and perforation methods on the fracture geometry, optimal design parameters for volume fracturing technology were obtained. Additionally, we propose optimization ideas and suggestions for construction parameters applicable to field operations. The simulation results indicate that a minimum recommended fluid volume scale exceeding 1800 m3 is advised for the reservoir. Based on frictional calculations, it is recommended to have an on-site construction rate not less than 18.0 m3/min along with 36-48 holes/section for perforation purposes. The numerical simulation research presented in this paper provides a theoretical reference basis and practical guidance for the application of fracturing network technology in tight sandstone reservoirs.