Response of a finite element model of the pelvis to different side impact loads / 生物医学工程学杂志
Journal of Biomedical Engineering
; (6): 772-776, 2013.
Article
em Zh
| WPRIM
| ID: wpr-352168
Biblioteca responsável:
WPRO
ABSTRACT
The pelvis is one of the most likely affected areas of the human body in case of side impact, especially while people suffer from motor vehicle crashes. With the investigation of pelvis injury on side impact, the injury biomechanical behavior of pelvis can be found, and the data can help design the vehicle security devices to keep the safety of the occupants. In this study, a finite element (FE) model of an isolated human pelvis was used to study the pelvic dynamic response under different side impact conditions. Fracture threshold was established by applying lateral loads of 1000, 2000, 3000, 4000 and 5000 N, respectively, to the articular surface of the right acetabulum. It was observed that the smaller the lateral loads were, the smaller the von Mises stress and the displacement in the direction of impact were. It was also found that the failure threshold load was near 3000 N, based on the fact that the peak stress would not exceed the average compressive strength of the cortical bone. It could well be concluded that with better design of car-door and hip-pad so that the side impact force was brought down to 3000 N or lower, the pelvis would not be injured.
Texto completo:
1
Base de dados:
WPRIM
Assunto principal:
Pelve
/
Estresse Mecânico
/
Ferimentos e Lesões
/
Fenômenos Biomecânicos
/
Simulação por Computador
/
Acidentes de Trânsito
/
Análise de Elementos Finitos
/
Fraturas Ósseas
Limite:
Humans
Idioma:
Zh
Revista:
Journal of Biomedical Engineering
Ano de publicação:
2013
Tipo de documento:
Article