Biomechanical stress and microgap analysis of bone-level and tissue-level implant abutment structure according to the five different directions of occlusal loads
The Journal of Advanced Prosthodontics
; : 316-321, 2020.
Article
em En
| WPRIM
| ID: wpr-837228
Biblioteca responsável:
WPRO
ABSTRACT
PURPOSE@#The stress distribution and microgap formation on an implant abutment structure was evaluated to determine the relationship between the direction of the load and the stress value. @*MATERIALS AND METHODS@#Two types of three-dimensional models for the mandibular first molar were designed bone-level implant and tissue-level implant. Each group consisted of an implant, surrounding bone, abutment, screw, and crown. Static finite element analysis was simulated through 200 N of occlusal load and preload at five different load directions 0, 15, 30, 45, and 60°. The von Mises stress of the abutment and implant was evaluated. Microgap formation on the implant-abutment interface was also analyzed. @*RESULTS@#The stress values in the implant were as follows 525, 322, 561, 778, and 1150 MPa in a bone level implant, and 254, 182, 259, 364, and 436 MPa in a tissue level implant at a load direction of 0, 15, 30, 45, and 60°, respectively. For microgap formation between the implant and abutment interface, three to seven-micron gaps were observed in the bone level implant under a load at 45 and 60°. In contrast, a three-micron gap was observed in the tissue level implant under a load at only 60°. @*CONCLUSION@#The mean stress of bone-level implant showed 2.2 times higher than that of tissue-level implant. When considering the loading point of occlusal surface and the direction of load, higher stress was noted when the vector was from the center of rotation in the implant prostheses.
Texto completo:
1
Base de dados:
WPRIM
Idioma:
En
Revista:
The Journal of Advanced Prosthodontics
Ano de publicação:
2020
Tipo de documento:
Article