RESUMO
Through the postpolymerization modification of poly(allyl glycidyl ether) (PAGE), a functionalizable polyether with a poly(ethylene oxide) backbone, we engineered a new class of highly tunable polyampholyte materials. These polyampholytes can be synthesized to have several useful properties, including low cytotoxicity and pH-responsive coacervate formation. In this study, we used PAGE-based polyampholytes (PAGE-PAs) for the cryopreservation of mammalian cell suspensions. Typically, dimethyl sulfoxide (DMSO) is the cryoprotectant used for preserving mammalian cells, but DMSO suffers from key drawbacks including toxicity and difficult post-thaw removal that motivates the development of new materials and methods. Toxicity and post-thaw survival were dependent on PAGE-PA composition with the highest immediate post-thaw survival for normal human dermal fibroblasts occurring for the least toxic PAGE-PA at a cation/anion ratio of 35:65. With low toxicity, the PAGE-PA concentration could be increased in order to increase immediate post-thaw survival of the immortalized mouse embryonic fibroblasts (NIH/3T3). While immediate post-thaw viability was achieved using only the PAGE-PAs, long-term cell survival was low, highlighting the challenges involved with the design of cryoprotective polyampholytes. An environment utilizing both PAGE-PAs and DMSO in a cryoprotective solution offered promising post-thaw viabilities exceeding 70%, with long-term metabolic activities comparable to unfrozen cells.
Assuntos
Dimetil Sulfóxido , Fibroblastos , Animais , Camundongos , Humanos , Sobrevivência Celular , Criopreservação/métodos , Poli A , MamíferosRESUMO
Under the right conditions, some biological systems can maintain high viability after being frozen and thawed, but many others (e.g., organs and many mammalian cells) cannot. To increase the rates of post-thaw viability and widen the library of living cells and tissues that can be stored frozen, an improved understanding of the mode of action of polymeric cryoprotectants is required. Here, we present a polymeric cryoprotectant, poly(methyl glycidyl sulfoxide) (PMGS), that achieved higher post-thaw viability for fibroblast cells than its small-molecule analogue dimethyl sulfoxide. By limiting the amount of water that freezes and facilitating cellular dehydration after ice nucleation, PMGS mitigates the mechanical and osmotic stresses that the freezing of water imparts on cells and facilitates higher-temperature vitrification of the remaining unfrozen volume. The development of PMGS advances a fundamental physical understanding of polymer-mediated cryopreservation, which enables new material design for long-term preservation of complex cellular networks and tissue.
Assuntos
Criopreservação , Polímeros , Animais , Crioprotetores/farmacologia , Dimetil Sulfóxido/farmacologia , Congelamento , VitrificaçãoRESUMO
Myofibroblasts are a highly secretory and contractile cell phenotype that are predominant in wound healing and fibrotic disease. Traditionally, myofibroblasts are identified by the de novo expression and assembly of alpha-smooth muscle actin stress fibers, leading to a binary classification: "activated" or "quiescent (non-activated)". More recently, however, myofibroblast activation has been considered on a continuous spectrum, but there is no established method to quantify the position of a cell on this spectrum. To this end, we developed a strategy based on microscopy imaging and machine learning methods to quantify myofibroblast activation in vitro on a continuous scale. We first measured morphological features of over 1000 individual cardiac fibroblasts and found that these features provide sufficient information to predict activation state. We next used dimensionality reduction techniques and self-supervised machine learning to create a continuous scale of activation based on features extracted from microscopy images. Lastly, we compared our findings for mechanically activated cardiac fibroblasts to a distribution of cell phenotypes generated from transcriptomic data using single-cell RNA sequencing. Altogether, these results demonstrate a continuous spectrum of myofibroblast activation and provide an imaging-based strategy to quantify the position of a cell on that spectrum.
Assuntos
Actinas , Miofibroblastos , Actinas/metabolismo , Diferenciação Celular/fisiologia , Células Cultivadas , Fibroblastos/metabolismo , Miofibroblastos/metabolismo , Cicatrização/fisiologiaRESUMO
Human mesenchymal stromal cells (hMSCs) are multipotent cells that have been proposed for cell therapies due to their immunosuppressive capacity that can be enhanced in the presence of interferon-gamma (IFN-γ). In this study, multilayers of heparin (HEP) and collagen (COL) (HEP/COL) were used as a bioactive surface to enhance the immunomodulatory activity of hMSCs using soluble IFN-γ. Multilayers were formed, via layer-by-layer assembly, varying the final layer between COL and HEP and supplemented with IFN-γ in the culture medium. We evaluated the viability, adhesion, real-time growth, differentiation, and immunomodulatory activity of hMSCs on (HEP/COL) multilayers. HMSCs viability, adhesion, and growth were superior when cultured on (HEP/COL) multilayers compared to tissue culture plastic. We also confirmed that hMSCs osteogenic and adipogenic differentiation remained unaffected when cultured in (HEP/COL) multilayers in the presence of IFN-γ. We measured the immunomodulatory activity of hMSCs by measuring the level of indoleamine 2,3-dioxygenase (IDO) expression. IDO expression was higher on (HEP/COL) multilayers treated with IFN-γ. Lastly, we evaluated the suppression of peripheral blood mononuclear cell (PBMC) proliferation when co-cultured with hMSCs on (HEP/COL) multilayers with IFN-γ. hMSCs cultured in (HEP/COL) multilayers in the presence of soluble IFN-γ have a greater capacity to suppress PBMC proliferation. Altogether, (HEP/COL) multilayers with IFN-γ in culture medium provides a potent means of enhancing and sustaining immunomodulatory activity to control hMSCs immunomodulation.
RESUMO
Cardiac fibrosis is a pathological process characterized by excessive tissue deposition, matrix remodeling, and tissue stiffening, which eventually leads to organ failure. On a cellular level, the development of fibrosis is associated with the activation of cardiac fibroblasts into myofibroblasts, a highly contractile and secretory phenotype. Myofibroblasts are commonly identified in vitro by the de novo assembly of alpha-smooth muscle actin stress fibers; however, there are few methods to automate stress fiber identification, which can lead to subjectivity and tedium in the process. To address this limitation, we present a computer vision model to classify and segment cells containing alpha-smooth muscle actin stress fibers into 2 classes (α-SMA SF+ and α-SMA SF-), with a high degree of accuracy (cell accuracy: 77%, F1 score 0.79). The model combines standard image processing methods with deep learning techniques to achieve semantic segmentation of the different cell phenotypes. We apply this model to cardiac fibroblasts cultured on hyaluronic acid-based hydrogels of various moduli to induce alpha-smooth muscle actin stress fiber formation. The model successfully predicts the same trends in stress fiber identification as obtained with a manual analysis. Taken together, this work demonstrates a process to automate stress fiber identification in in vitro fibrotic models, thereby increasing reproducibility in fibroblast phenotypic characterization.
Assuntos
Actinas/metabolismo , Aprendizado Profundo , Miocárdio/citologia , Miocárdio/metabolismo , Fibras de Estresse/metabolismo , Inteligência Artificial , Cardiomiopatias/metabolismo , Cardiomiopatias/patologia , Técnicas de Cultura de Células , Células Cultivadas , Elasticidade , Fibroblastos/metabolismo , Humanos , Hidrogéis , Processamento de Imagem Assistida por Computador , Modelos Cardiovasculares , Miofibroblastos/classificação , Miofibroblastos/metabolismo , Miofibroblastos/patologia , Fibras de Estresse/classificação , Fibras de Estresse/patologia , Propriedades de SuperfícieRESUMO
The native extracellular matrix (ECM) is composed of hierarchically structured biopolymers containing precise monomer sequences and chain shapes to yield bioactivity. Recapitulating this structure in synthetic hydrogels is of particular interest for tissue engineering and in vitro disease models to accurately mimic biological microenvironments. However, despite extensive research on hydrogels, it remains a challenge to recapitulate the hierarchical structure of native ECM with completely synthetic hydrogel platforms. Toward this end, this work presents a synthetic hydrogel system using commercially available poly(ethylene glycol) macromers with sequence-defined poly(N-substituted glycines) (peptoids) as crosslinkers. We demonstrate that bulk hydrogel mechanics, specifically as shear storage modulus, can be controlled by altering peptoid sequence and structure. Notably, the helical peptoid sequence investigated here increases the storage modulus of the resulting hydrogels with increasing helical content and chain length, in a fashion similar to helical peptide-crosslinked hydrogels. In addition, the resulting hydrogels are shown to be hydrolytically and enzymatically stable due to the N-substituted peptidomimetic backbone of the crosslinkers. We further demonstrate the potential utility of these peptoid-crosslinked hydrogels as a viable cell culture platform using seeded human dermal fibroblasts in comparison to peptide-crosslinked hydrogels as a control. Taken together, our system offers a strategy toward ECM mimics that replicate the hierarchy of biological matrices with completely synthetic, sequence-defined molecules.
Assuntos
Hidrogéis/química , Peptídeos/química , Sequência de Aminoácidos , Sobrevivência Celular/efeitos dos fármacos , Fibroblastos/citologia , Fibroblastos/efeitos dos fármacos , Humanos , Peptídeos/farmacologia , Polietilenoglicóis/química , Conformação Proteica em alfa-HéliceRESUMO
Enhancing materials with the qualities of living systems, including sensing, computation, and adaptation, is an important challenge in designing next-generation technologies. Living materials address this challenge by incorporating live cells as actuating components that control material function. For abiotic materials, this requires new methods that couple genetic and metabolic processes to material properties. Toward this goal, we demonstrate that extracellular electron transfer (EET) from Shewanella oneidensis can be leveraged to control radical cross-linking of a methacrylate-functionalized hyaluronic acid hydrogel. Cross-linking rates and hydrogel mechanics, specifically storage modulus, were dependent on various chemical and biological factors, including S. oneidensis genotype. Bacteria remained viable and metabolically active in the networks for a least 1 week, while cell tracking revealed that EET genes also encode control over hydrogel microstructure. Moreover, construction of an inducible gene circuit allowed transcriptional control of storage modulus and cross-linking rate via the tailored expression of a key electron transfer protein, MtrC. Finally, we quantitatively modeled hydrogel stiffness as a function of steady-state mtrC expression and generalized this result by demonstrating the strong relationship between relative gene expression and material properties. This general mechanism for radical cross-linking provides a foundation for programming the form and function of synthetic materials through genetic control over extracellular electron transfer.
Assuntos
Hidrogéis , Shewanella , Transporte de Elétrons , Regulação Bacteriana da Expressão Gênica , Shewanella/genéticaRESUMO
Controlling and predicting unwanted degradation, such as non-native aggregation, is a long-standing challenge for mAbs and other protein-based products. mAb aggregation rates are typically sensitive to temperature, pH, and the addition of excipients. Quantitatively comparing temperature-dependent aggregation rates across multiple possible formulations is a challenge in product development. A parallel temperature initial rate method is used to efficiently and accurately determine initial rates for anti-streptavidin (AS) IgG1 aggregation as a function of pH, [NaCl], and in the presence of acetate versus citrate buffer. Parallel temperature initial rates are shown to agree with results from a traditional, isothermal method and permits direct comparison of the formulations across almost 3 orders of magnitude of aggregation rates. The apparent midpoint unfolding temperatures (through differential scanning calorimetry) and the effective activation energy values (Ea) are generally higher in acetate buffer compared with citrate buffer, which is consistent with preferential accumulation of citrate ions compared with acetate ions that was speculated in previous work (Barnett et al., J Phys Chem B, 2015). Static light scattering and Kirkwood-Buff analysis show that AS-IgG1 has stronger net repulsive protein-protein interactions in acetate compared with citrate buffer, also consistent with increased values of Ea. In an extreme case, aggregation of AS-IgG1 is effectively eliminated across all practical temperatures at pH 4 in 10 mM sodium acetate but proceeds readily in citrate buffer.