Engineered SARS-CoV-2 receptor binding domain improves manufacturability in yeast and immunogenicity in mice.

Global containment of COVID-19 still requires accessible and affordable vaccines for low- and middle-income countries (LMICs). Recently approved vaccines provide needed interventions, albeit at prices that may limit their global access. Subunit vaccines based on recombinant proteins are suited for large-volume microbial manufacturing to yield billions of doses annually, minimizing their manufacturing cost. These types of vaccines are well-established, proven interventions with multiple safe and efficacious commercial examples. Many vaccine candidates of this type for SARS-CoV-2 rely on sequences containing the receptor-binding domain (RBD), which mediates viral entry to cells via ACE2. Here we report an engineered sequence variant of RBD that exhibits high-yield manufacturability, high-affinity binding to ACE2, and enhanced immunogenicity after a single dose in mice compared to the Wuhan-Hu-1 variant used in current vaccines. Antibodies raised against the engineered protein exhibited heterotypic binding to the RBD from two recently reported SARS-CoV-2 variants of concern (501Y.V1/V2). Presentation of the engineered RBD on a designed virus-like particle (VLP) also reduced weight loss in hamsters upon viral challenge.

Controlled Lipid Self-Assembly for Scalable Manufacturing of Next-Generation Immune Stimulating Complexes.

Immune stimulating complexes (ISCOMs) are safe and effective saponin-based adjuvants formed by the self-assembly of saponin, cholesterol, and phospholipids in water to form cage-like 30-40 nm diameter particles. Inclusion of the Toll-like receptor 4 agonist monophosphoryl lipid A (MPLA) in ISCOM particles yields a promising next-generation adjuvant termed Saponin-MPLA NanoParticles (SMNP). In this work, we detail protocols to produce ISCOMs or SMNP via a tangential flow filtration (TFF) process suitable for scalable synthesis and Good Manufacturing Practice (GMP) production of clinical-grade adjuvants. SMNP or ISCOM components were solubilized in micelles of the surfactant MEGA-10, then diluted below the critical micelle concentration (CMC) of the surfactant to drive ISCOM self-assembly. Assembly of ISCOM/SMNP particles using the purified saponin QS-21 used in clinical-grade saponin adjuvants was found to require controlled stepwise dilution of the initial micellar solution, to prevent formation of undesirable kinetically-trapped aggregate species. An optimized protocol gave yields of ~77% based on the initial feed of QS-21 and the final SMNP particle composition mirrored the feed ratios of the components. Further, samples were highly homogeneous with comparable quality to that of material prepared at lab scale by dialysis and purified via size-exclusion chromatography. This protocol may be useful for clinical preparation of ISCOM-based vaccine adjuvants and therapeutics.

Surfactant-Mediated Assembly of Precision-Size Liposomes.

Liposomes can greatly improve the pharmacokinetics of therapeutic agents due to their ability to encapsulate drugs and accumulate in target tissues. Considerable effort has been focused on methods to synthesize these nanocarriers in the past decades. However, most methods fail to controllably generate lipid vesicles at specific sizes and with low polydispersity, especially via scalable approaches suitable for clinical product manufacturing. Here, we report a surfactant-assisted liposome assembly method enabling the precise production of monodisperse liposomes with diameters ranging from 50 nm to 1 µm. To overcome scalability limitations, we used tangential flow filtration, a scalable size-based separation technique, to readily concentrate and purify the liposomal samples from more than 99.9% of detergent. Further, we propose two modes of liposome self-assembly following detergent dilution to explain the wide range of liposome size control, one in which phase separation into lipid-rich and detergent-rich phases drives the formation of large bilayer liposomes and a second where the rate of detergent monomer partitioning into solution controls bilayer leaflet imbalances that promote fusion into larger vesicles. We demonstrate the utility of controlled size assembly of liposomes by evaluating nanoparticle uptake in macrophages, where we observe a clear linear relationship between vesicle size and total nanoparticle uptake.

Optimization of storage conditions for lipid nanoparticle-formulated self-replicating RNA vaccines.

The recent clinical success of multiple mRNA-based SARS-CoV-2 vaccines has proven the potential of RNA formulated in lipid nanoparticles (LNPs) in humans, and products based on base-modified RNA, sequence-optimized RNA, and self-replicating RNAs formulated in LNPs are all in various stages of clinical development. However, much remains to be learned about critical parameters governing the manufacturing and use of LNP-RNA formulations. One important issue that has received limited attention in the literature to date is the identification of optimal storage conditions for LNP-RNA that preserve long-term activity of the formulations. Here, we analyzed the physical structure, in vivo expression characteristics, and functional activity of alphavirus-derived self-replicating RNA (repRNA)-loaded LNPs encoding HIV vaccine antigens following storage in varying temperatures, buffers, and in the presence or absence of cryoprotectants. We found that for lipid nanoparticles with compositions similar to clinically-used LNPs, storage in RNAse-free PBS containing 10% (w/v) sucrose at -20 °C was able to maintain vaccine stability and in vivo potency at a level equivalent to freshly prepared vaccines following 30 days of storage. LNPs loaded with repRNA could also be lyophilized with retention of bioactivity.

SARS-CoV-2 receptor binding domain displayed on HBsAg virus-like particles elicits protective immunity in macaques.

Authorized vaccines against SARS-CoV-2 remain less available in low- and middle-income countries due to insufficient supply, high costs, and storage requirements. Global immunity could still benefit from new vaccines using widely available, safe adjuvants, such as alum and protein subunits, suited to low-cost production in existing manufacturing facilities. Here, a clinical-stage vaccine candidate comprising a SARS-CoV-2 receptor binding domain-hepatitis B surface antigen virus-like particle elicited protective immunity in cynomolgus macaques. Titers of neutralizing antibodies (>104) induced by this candidate were above the range of protection for other licensed vaccines in nonhuman primates. Including CpG 1018 did not significantly improve the immunological responses. Vaccinated animals challenged with SARS-CoV-2 showed reduced median viral loads in bronchoalveolar lavage (~3.4 log10) and nasal mucosa (~2.9 log10) versus sham controls. These data support the potential benefit of this design for a low-cost modular vaccine platform for SARS-CoV-2 and other variants of concern or betacoronaviruses.

Computationally guided high-throughput design of self-assembling drug nanoparticles.

Nanoformulations of therapeutic drugs are transforming our ability to effectively deliver and treat a myriad of conditions. Often, however, they are complex to produce and exhibit low drug loading, except for nanoparticles formed via co-assembly of drugs and small molecular dyes, which display drug-loading capacities of up to 95%. There is currently no understanding of which of the millions of small-molecule combinations can result in the formation of these nanoparticles. Here we report the integration of machine learning with high-throughput experimentation to enable the rapid and large-scale identification of such nanoformulations. We identified 100 self-assembling drug nanoparticles from 2.1 million pairings, each including one of 788 candidate drugs and one of 2,686 approved excipients. We further characterized two nanoparticles, sorafenib-glycyrrhizin and terbinafine-taurocholic acid both ex vivo and in vivo. We anticipate that our platform can accelerate the development of safer and more efficacious nanoformulations with high drug-loading capacities for a wide range of therapeutics.

A modular protein subunit vaccine candidate produced in yeast confers protection against SARS-CoV-2 in non-human primates.

Vaccines against SARS-CoV-2 have been distributed at massive scale in developed countries, and have been effective at preventing COVID-19. Access to vaccines is limited, however, in low- and middle-income countries (LMICs) due to insufficient supply, high costs, and cold storage requirements. New vaccines that can be produced in existing manufacturing facilities in LMICs, can be manufactured at low cost, and use widely available, proven, safe adjuvants like alum, would improve global immunity against SARS-CoV-2. One such protein subunit vaccine is produced by the Serum Institute of India Pvt. Ltd. and is currently in clinical testing. Two protein components, the SARS-CoV-2 receptor binding domain (RBD) and hepatitis B surface antigen virus-like particles (VLPs), are each produced in yeast, which would enable a low-cost, high-volume manufacturing process. Here, we describe the design and preclinical testing of the RBD-VLP vaccine in cynomolgus macaques. We observed titers of neutralizing antibodies (>104) above the range of protection for other licensed vaccines in non-human primates. Interestingly, addition of a second adjuvant (CpG1018) appeared to improve the cellular response while reducing the humoral response. We challenged animals with SARS-CoV-2, and observed a ~3.4 and ~2.9 log10 reduction in median viral loads in bronchoalveolar lavage and nasal mucosa, respectively, compared to sham controls. These results inform the design and formulation of current clinical COVID-19 vaccine candidates like the one described here, and future designs of RBD-based vaccines against variants of SARS-CoV-2 or other betacoronaviruses.

Engineered SARS-CoV-2 receptor binding domain improves immunogenicity in mice and elicits protective immunity in hamsters.

Global containment of COVID-19 still requires accessible and affordable vaccines for low- and middle-income countries (LMICs).1 Recently approved vaccines provide needed interventions, albeit at prices that may limit their global access.2 Subunit vaccines based on recombinant proteins are suited for large-volume microbial manufacturing to yield billions of doses annually, minimizing their manufacturing costs.3 These types of vaccines are well-established, proven interventions with multiple safe and efficacious commercial examples.4-6 Many vaccine candidates of this type for SARS-CoV-2 rely on sequences containing the receptor-binding domain (RBD), which mediates viral entry to cells via ACE2.7,8 Here we report an engineered sequence variant of RBD that exhibits high-yield manufacturability, high-affinity binding to ACE2, and enhanced immunogenicity after a single dose in mice compared to the Wuhan-Hu-1 variant used in current vaccines. Antibodies raised against the engineered protein exhibited heterotypic binding to the RBD from two recently reported SARS-CoV-2 variants of concern (501Y.V1/V2). Presentation of the engineered RBD on a designed virus-like particle (VLP) also reduced weight loss in hamsters upon viral challenge.