RESUMEN
BACKGROUND: Collagen XVII is most typically associated with human disease when biallelic COL17A1 variants (>230) cause junctional epidermolysis bullosa (JEB), a rare, genetically heterogeneous, mucocutaneous blistering disease with amelogenesis imperfecta (AI), a developmental enamel defect. Despite recognition that heterozygous carriers in JEB families can have AI, and that heterozygous COL17A1 variants also cause dominant corneal epithelial recurrent erosion dystrophy (ERED), the importance of heterozygous COL17A1 variants causing dominant non-syndromic AI is not widely recognised. METHODS: Probands from an AI cohort were screened by single molecule molecular inversion probes or targeted hybridisation capture (both a custom panel and whole exome sequencing) for COL17A1 variants. Patient phenotypes were assessed by clinical examination and analyses of affected teeth. RESULTS: Nineteen unrelated probands with isolated AI (no co-segregating features) had 17 heterozygous, potentially pathogenic COL17A1 variants, including missense, premature termination codons, frameshift and splice site variants in both the endo-domains and the ecto-domains of the protein. The AI phenotype was consistent with enamel of near normal thickness and variable focal hypoplasia with surface irregularities including pitting. CONCLUSION: These results indicate that COL17A1 variants are a frequent cause of dominantly inherited non-syndromic AI. Comparison of variants implicated in AI and JEB identifies similarities in type and distribution, with five identified in both conditions, one of which may also cause ERED. Increased availability of genetic testing means that more individuals will receive reports of heterozygous COL17A1 variants. We propose that patients with isolated AI or ERED, due to COL17A1 variants, should be considered as potential carriers for JEB and counselled accordingly, reflecting the importance of multidisciplinary care.
Asunto(s)
Amelogénesis Imperfecta , Colágenos no Fibrilares , Humanos , Colágenos no Fibrilares/genética , Colágenos no Fibrilares/metabolismo , Autoantígenos/genética , Amelogénesis Imperfecta/genética , Heterocigoto , Fenotipo , Mutación/genéticaRESUMEN
The remarkable physical properties of dental enamel can be largely attributed to the structure of the hydroxyapatite (HAp) crystallites on the sub-micrometre scale. Characterising the HAp microstructure is challenging, due to the nanoscale of individual crystallites and practical challenges associated with HAp examination using electron microscopy techniques. Conventional methods for enamel characterisation include imaging using transmission electron microscopy (TEM) or specialised beamline techniques, such as polarisation-dependent imaging contrast (PIC). These provide useful information at the necessary spatial resolution but are not able to measure the full crystallographic orientation of the HAp crystallites. Here we demonstrate the effectiveness of enamel analyses using transmission Kikuchi diffraction (TKD) in the scanning electron microscope, coupled with newly-developed pattern matching methods. The pattern matching approach, using dynamic template matching coupled with subsequent orientation refinement, enables robust indexing of even poor-quality TKD patterns, resulting in significantly improved data quality compared to conventional diffraction pattern indexing methods. The potential of this method for the analysis of nanocrystalline enamel structures is demonstrated by the characterisation of a human enamel TEM sample and the subsequent comparison of the results to high resolution TEM imaging. The TKD - pattern matching approach measures the full HAp crystallographic orientation enabling a quantitative measurement of not just the c-axis orientations, but also the extent of any rotation of the crystal lattice about the c-axis, between and within grains. Results presented here show how this additional information highlights potentially significant aspects of the HAp crystallite structure, including intra-crystallite distortion and the presence of multiple high angle boundaries between adjacent crystallites with rotations about the c-axis. These and other observations enable a more rigorous understanding of the relationship between HAp structures and the physical properties of dental enamel.
RESUMEN
Cartilage degeneration is a characteristic of osteoarthritis (OA), which is often observed in aging populations. This degeneration is due to the breakdown of articular cartilage (AC) mechanical and tribological properties primarily attributed to lubrication failure. Understanding the reasons behind these failures and identifying potential solutions could have significant economic and societal implications, ultimately enhancing quality of life. This review provides an overview of developments in the field of AC, focusing on its mechanical and tribological properties. The emphasis is on the role of lubrication in degraded AC, offering insights into its structure and function relationship. Further, it explores the fundamental connection between AC mechano-tribological properties and the advancement of its degradation and puts forth recommendations for strategies to boost its lubrication efficiency.
RESUMEN
Komodo dragons (Varanus komodoensis) are the largest extant predatory lizards and their ziphodont (serrated, curved and blade-shaped) teeth make them valuable analogues for studying tooth structure, function and comparing with extinct ziphodont taxa, such as theropod dinosaurs. Like other ziphodont reptiles, V. komodoensis teeth possess only a thin coating of enamel that is nevertheless able to cope with the demands of their puncture-pull feeding. Using advanced chemical and structural imaging, we reveal that V. komodoensis teeth possess a unique adaptation for maintaining their cutting edges: orange, iron-enriched coatings on their tooth serrations and tips. Comparisons with other extant varanids and crocodylians revealed that iron sequestration is probably widespread in reptile enamels but it is most striking in V. komodoensis and closely related ziphodont species, suggesting a crucial role in supporting serrated teeth. Unfortunately, fossilization confounds our ability to consistently detect similar iron coatings in fossil teeth, including those of ziphodont dinosaurs. However, unlike V. komodoensis, some theropods possessed specialized enamel along their tooth serrations, resembling the wavy enamel found in herbivorous hadrosaurid dinosaurs. These discoveries illustrate unexpected and disparate specializations for maintaining ziphodont teeth in predatory reptiles.
RESUMEN
Mucopolysaccharidosis type IVA (MPS IVA) or Morquio syndrome is a multisystem disorder caused by galactosamine-6-sulfatase deficiency. Skeletal manifestations, including short stature, skeletal dysplasia, cervical instability, and joint destruction, are known to be associated with this condition. Due to the severity of these skeletal manifestations, the non-skeletal manifestations are frequently overlooked despite their significant contribution to disease progression and impact on quality of life. This review provides detailed information regarding the non-skeletal manifestations and suggests long-term assessment guidelines. The visual, auditory, digestive, cardiovascular, and respiratory systems are addressed and overall quality of life as measured by endurance and other functional abilities is discussed. Impairments such as corneal clouding, astigmatism, glaucoma, hearing loss, hernias, hepatomegaly, dental abnormalities, cardiac valve thickening and regurgitation, obstructive sleep apnea, tracheomalacia, restrictive and obstructive respiratory compromise, and muscular weakness are discussed. Increased awareness of these non-skeletal features is needed to improve patient care.
Asunto(s)
Mucopolisacaridosis IV/tratamiento farmacológico , Mucopolisacaridosis IV/fisiopatología , Humanos , Calidad de VidaRESUMEN
The biomineralization of human dental enamel has resulted in a highly anisotropic and heterogeneous distribution of hydroxyapatite crystallites, which in combination with its high mineral content has resulted in one of the most durable and hardest tissues in the human body. In this study, we used position-sensitive synchrotron X-ray diffraction to quantify the spatial variation in the direction and magnitude of the preferred orientation of enamel crystallites across a whole tooth crown. Two-dimensional synchrotron X-ray diffraction images were collected with 300 µm spatial resolution over a series of six sequential tooth sections obtained from a single maxillary first premolar and were analyzed using Rietveld refinement. Both the magnitude and the direction of the crystallite orientation were found to have a high spatial heterogeneity. Areas of high crystallite alignment were directed perpendicular to the biting surfaces, which is thought to meet the functional requirements of mastication. The results may assist in our understanding of the structure-function relationship and of the evolutionary development of enamel.
Asunto(s)
Esmalte Dental/química , Durapatita/química , Corona del Diente/química , Anisotropía , Diente Premolar , Cristalización , Cristalografía por Rayos X/métodos , Humanos , Imagenología Tridimensional , Relación Estructura-Actividad , SincrotronesRESUMEN
This corrects the article DOI: 10.1038/srep16511.
RESUMEN
For human dental enamel, what is the precise mineralization progression spatially and the precise timing of mineralization? This is an important question in the fundamental understanding of matrix-mediated biomineralization events, but in particular because we can use our understanding of this natural tissue growth in humans to develop biomimetic approaches to repair and replace lost enamel tissue. It is important to understand human tissues in particular since different species have quite distinct spatial and temporal progression of mineralization. In this study, five human central incisors at different stages of enamel maturation/mineralization were spatially mapped using synchrotron X-ray diffraction and X-ray microtomography techniques. From the earliest developmental stage, two crystallite-orientation populations coexist with angular separations between the crystallite populations of approximately 40° varying as a function of position within the tooth crown. In general, one population had significantly lower texture magnitude and contributed a higher percentage to the overall crystalline structure, compared to the other population which contributed only 20-30% but had significantly higher texture magnitude. This quantitative analysis allows us to understand the complex and co-operative structure-function relationship between two populations of crystallites within human enamel. There was an increase in the mineral concentration from the enamel-dentin junction peripherally and from the incisal tip cervically as a function of maturation time. Quantitative backscattered-electron analyses showed that mineralization of prism cores precedes that of prism boundaries. These results provide new insights into the precise understanding of the natural growth of human enamel.
Asunto(s)
Amelogénesis , Esmalte Dental/química , Incisivo/química , Minerales/química , Corona del Diente/química , Cristalografía por Rayos X , Esmalte Dental/metabolismo , Humanos , Incisivo/metabolismo , Minerales/metabolismo , Sincrotrones , Corona del Diente/metabolismo , Microtomografía por Rayos XRESUMEN
OBJECTIVES: To measure the spatial distribution of crystallographic strain in tooth enamel induced by the photo-polymerisation of a dimethacrylate resin based composite cavity restoration. METHODS: Six sound first premolar teeth, allocated into two groups (n=3), were prepared with mesio-occlusal distal cavities. The enamel was machined at the point of maximum convexity on the outer tooth to create a vertical fin of thickness 100µm and 0.5mm depth to allow for synchrotron X-ray diffraction measurements. 2D diffraction patterns were used to determine crystallite orientation and quantify changes in the hydroxyapatite crystal lattice parameters, before and after photo-polymerisation of a composite material placed in the cavity, to calculate strain in the respective axis. The composite was photo-polymerised with either relatively high (1200mWcm-2, group 1) or low (480mWcm-2, group 2) irradiances using LED or quartz halogen light sources, respectively. A paired t-test was used to determine significant differences in strain between irradiance protocols at É=0.001. RESULTS: Photo-polymerisation of the composite in the adjacent cavity induced significant changes in both the crystallographic c and a axes of the enamel measurement area. However the magnitude of strain was low with â¼0.1% difference before and after composite photo-polymerisation. Strain in enamel was not uniformly distributed and varied spatially as a function of crystallite orientation. Increased alignment of crystallites perpendicular to the cavity wall was associated with higher c axis strain. Additionally, strain was significantly greater in the c (p<0.001) and a axis (p<0.001) when using a high irradiance photo-polymerisation protocol. SIGNIFICANCE: Although cuspal deflection is routinely measured to indirectly assess the 'global' effect of composite shrinkage on the tooth-restoration complex, here we show that absolute strains generated in enamel are low, indicating strain relief mechanisms may be operative. The use of low irradiance protocols for photo-polymerisation resulted in reduced strain.
Asunto(s)
Resinas Compuestas/química , Preparación de la Cavidad Dental/métodos , Esmalte Dental/química , Durapatita/química , Sincrotrones , Diente Premolar , Resinas Compuestas/efectos de la radiación , Cristalografía por Rayos X , Esmalte Dental/efectos de la radiación , Filtración Dental , Durapatita/efectos de la radiación , Humanos , Procesamiento de Imagen Asistido por Computador , Técnicas In Vitro , Polimerizacion , Estrés Mecánico , Difracción de Rayos XRESUMEN
A major goal in materials science is to develop bioinspired functional materials based on the precise control of molecular building blocks across length scales. Here we report a protein-mediated mineralization process that takes advantage of disorder-order interplay using elastin-like recombinamers to program organic-inorganic interactions into hierarchically ordered mineralized structures. The materials comprise elongated apatite nanocrystals that are aligned and organized into microscopic prisms, which grow together into spherulite-like structures hundreds of micrometers in diameter that come together to fill macroscopic areas. The structures can be grown over large uneven surfaces and native tissues as acid-resistant membranes or coatings with tuneable hierarchy, stiffness, and hardness. Our study represents a potential strategy for complex materials design that may open opportunities for hard tissue repair and provide insights into the role of molecular disorder in human physiology and pathology.
Asunto(s)
Calcificación Fisiológica , Dentina/metabolismo , Elastina/metabolismo , Proteínas Intrínsecamente Desordenadas/metabolismo , Minerales/metabolismo , Secuencia de Aminoácidos , Esmalte Dental/química , Dentina/química , Dentina/ultraestructura , Elastina/química , Elastina/ultraestructura , Humanos , Hidroxiapatitas/química , Hidroxiapatitas/metabolismo , Proteínas Intrínsecamente Desordenadas/química , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Minerales/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
We have used synchrotron X-ray diffraction to study the texture and the change in lattice parameter as a function of position in a cross section of human dental enamel. Our study is the first to map changes in preferred orientation and lattice parameter as a function of position within enamel across a whole tooth section with such high resolution. Synchrotron X-ray diffraction with a micro-focused beam spot was used to collect two-dimensional (2D) diffraction images at 150 microm spatial resolution over the entire tooth crown. Contour maps of the texture and lattice parameter distribution of the hydroxyapatite phase were produced from Rietveld refinement of diffraction patterns generated by azimuthally sectioning and integrating the 2D images. The 002 Debye ring showed the largest variation in intensity. This variation is indicative of preferred orientation. Areas of high crystallite alignment on the tooth cusps match the expected biting surfaces. Additionally we found a large variation in lattice parameter when travelling from the enamel surface to the enamel-dentine junction. We believe this to be due to a change in the chemical composition within the tooth. The results provide a new insight on the texture and lattice parameter profiles within enamel.
Asunto(s)
Esmalte Dental/anatomía & histología , Esmalte Dental/química , Difracción de Rayos X/métodos , Algoritmos , Durapatita/química , Humanos , Sincrotrones , Diente/anatomía & histología , Diente/química , Difracción de Rayos X/instrumentaciónRESUMEN
The process of enamel biomineralization is multi-step, complex and mediated by organic molecules. The lack of cells in mature enamel leaves it unable to regenerate and hence novel ways of growing enamel-like structures are currently being investigated. Recently, elastin-like protein (ELP) with the analog N-terminal sequence of statherin (STNA15-ELP) has been used to regenerate mineralized tissue. Here, the STNA15-ELP has been mineralized in constrained and unconstrained conditions in a fluoridated solution. We demonstrate that the control of STNA15-ELP delivery to the mineralizing solution can form layered ordered fluorapatite mineral, via a brushite precursor. We propose that the use of a constrained STNA15-ELP system can lead to the development of novel, bioinspired enamel therapeutics.
RESUMEN
OBJECTIVE: To determine whether Hunter syndrome (MPS II) affects the crystallographic texture (preferred orientation) of enamel. DESIGN: Synchrotron X-ray diffraction, being a state of the art technique, has been used to determine the enamel crystallite orientation in enamel affected by Hunter syndrome (MPS II). The incisal, lingual and cervical regions of the MPS II affected tooth were observed and compared to healthy tooth. RESULTS: It was observed that there is a loss of organization of crystallites in deciduous incisal enamel affected by Hunter syndrome (MPS II) as compared to healthy deciduous enamel tissue. Generally it was observed that, in contrast to the healthy enamel, the enamel affected by MPS II possessed a lower crystallographic preferred orientation, with a more uniform spatial distribution; however, the enamel at the incisal tip was relatively unaffected. CONCLUSION: Hunter syndrome affects the enamel texture in the lingual and cervical regions of the tooth.
Asunto(s)
Esmalte Dental/química , Mucopolisacaridosis II/complicaciones , Cristalografía por Rayos X , Humanos , Técnicas In Vitro , Incisivo , Sincrotrones , Difracción de Rayos XRESUMEN
Mucopolysaccharidosis (MPS) is an inherited metabolic disorder that can affect the tooth structure leading to defects. Synchrotron X-ray diffraction being a state of the art technique has been used to determine the enamel crystallite orientation in deciduous enamel affected by Mucopolysaccharidosis Type I and Mucopolysaccharidosis Type IVA and comparing these with that of healthy deciduous enamel. Using this technique it was observed that there is a loss of texture in deciduous enamel affected by Mucopolysaccharidosis Type I and Mucopolysaccharidosis Type IVA when compared to the healthy deciduous enamel. Generally it was observed that the incisal surface of the deciduous teeth possessed a higher texture or preferred orientation of enamel crystallites and on progression towards the cervical region there was a decrease in the texture or preferred orientation of enamel crystallites. Scanning electron microscopy showed that the presence of a poorly calcified layer between the enamel and dentine at the enamel-dentine junction (EDJ) in MPS affected samples was likely to be responsible for rendering the tooth structure weak and prone to fracture as is often the case in MPS affected deciduous enamel.
Asunto(s)
Esmalte Dental/química , Esmalte Dental/ultraestructura , Microscopía Electrónica de Rastreo , Mucopolisacaridosis/diagnóstico , Difracción de Rayos X , HumanosRESUMEN
Molar incisor hypomineralization (MIH) affects the permanent incisors and molars, whose undermineralized matrix is evidenced by lesions ranging from white to yellow/brown opacities to crumbling enamel lesions incapable of withstanding normal occlusal forces and function. Diagnosing the condition involves clinical and radiographic examination of these teeth, with known limitations in determining the depth extent of the enamel defects in particular. Optical coherence tomography (OCT) is an emerging hard and soft tissue imaging technique, which was investigated as a new potential diagnostic method in dentistry. A comparison between the diagnostic potential of the conventional methods and OCT was conducted. Compared to conventional imaging methods, OCT gave more information on the structure of the enamel defects as well as the depth extent of the defects into the enamel structure. Different types of enamel defects were compared, each type presenting a unique identifiable pattern when imaged using OCT. Additionally, advanced methods of OCT image analysis including backscattered light intensity profile analysis and enface reconstruction were performed. Both methods confirmed the potential of OCT in enamel defects diagnosis. In conclusion, OCT imaging enabled the identification of the type of enamel defect and the determination of the extent of the enamel defects in MIH with the advantage of being a radiation free diagnostic technique.
Asunto(s)
Hipoplasia del Esmalte Dental/diagnóstico por imagen , Esmalte Dental/diagnóstico por imagen , Interpretación de Imagen Asistida por Computador/métodos , Tomografía de Coherencia Óptica/métodos , Esmalte Dental/patología , Hipoplasia del Esmalte Dental/patología , Humanos , Diente/diagnóstico por imagen , Diente/patologíaRESUMEN
Dental caries is the most prevalent disease encountered by people of all ages around the world. Chemical changes occurring in the oral environment during the caries process alter the crystallography and microstructure of dental enamel resulting in loss of mechanical function. Little is known about the crystallographic effects of demineralization and remineralization. The motivation for this study was to develop understanding of the caries process at the crystallographic level in order to contribute towards a long term solution. In this study synchrotron X-ray diffraction combined with scanning electron microscopy and scanning microradiography have been used to correlate enamel crystallography, microstructure and mineral concentration respectively in enamel affected by natural caries and following artificial demineralization and remineralization regimes. In particular, the extent of destruction and re-formation of this complex structure has been measured. 2D diffraction patterns collected at the European Synchrotron Radiation Facility were used to quantify changes in the preferred orientation (crystallographic texture) and position of the (002) Bragg reflection within selected regions of interest in each tooth slice, and then correlated with the microstructure and local mineral mass. The results revealed that caries and artificial demineralization cause a large reduction in crystallographic texture which is coupled with the loss of mineral mass. Remineralization restores the texture to the original level seen in healthy enamel and restores mineral density. The results also showed that remineralization promotes ordered formation of new crystallites and growth of pre-existing crystallites which match the preferred orientation of healthy enamel. Combining microstructural and crystallographic characterization aids the understanding of caries and erosion processes and assists in the progress towards developing therapeutic treatments to allow affected enamel to regain structural integrity.
Asunto(s)
Esmalte Dental/química , Esmalte Dental/ultraestructura , Remineralización Dental , Cristalografía , Caries Dental/fisiopatología , Humanos , Microrradiografía , Microscopía Electrónica de Rastreo , Minerales/análisis , Diente Molar/química , Valores de Referencia , Sincrotrones , Desmineralización Dental , Difracción de Rayos XRESUMEN
OBJECTIVE: The complex biological, physicochemical process of human dental enamel formation begins in utero and for most teeth takes several years to complete. Lost enamel tissue cannot regenerate, therefore a better understanding of the spatial and temporal progression of mineralization of this tissue is needed in order to design improved in vivo mineral growth processes for regenerative dentistry and allow the possibility to grow a synthetic whole or partial tooth. METHOD: Human dental enamel samples across a range of developmental stages available through archaeological collections have been used to explore the spatial and temporal progression of enamel biomineralization. Position sensitive synchrotron X-ray diffraction was used to quantify spatial and temporal variations in crystallite organization, lattice parameters and crystallite thickness at three different stages in enamel maturation. In addition X-ray microtomography was used to study mineral content distributions. RESULTS: An inverse correlation was found between the spatial variation in mineral content and the distribution of crystallite organization and thickness as a function of time during enamel maturation. Combined X-ray microtomography and synchrotron X-ray diffraction results show that as enamel matures the mineral content increases and the mineral density distribution becomes more homogeneous. Starting concurrently but proceeding at a slower rate, the enamel crystallites become more oriented and larger; and the crystallite organization becomes spatially more complex and heterogeneous. CONCLUSION: During the mineralization of human dental enamel, the rate of mineral formation and mineral organization are not identical. Whilst the processes start simultaneously, full mineral content is achieved earlier, and crystallite organization is slower and continues for longer. These findings provide detailed insights into mineral development in human dental enamel which can inform synthetic biomimetic approaches for the benefit of clinical dentistry.
Asunto(s)
Antropología Física/métodos , Esmalte Dental/crecimiento & desarrollo , Durapatita/química , Calcificación de Dientes/fisiología , Cristalografía por Rayos X , Esmalte Dental/química , Esmalte Dental/diagnóstico por imagen , Humanos , Sincrotrones , Microtomografía por Rayos XRESUMEN
OBJECTIVES: To understand the pathology of the ultrastructure of enamel affected by systemic disorders which disrupt enamel tissue formation in order to give insight into the precise mechanisms of matrix-mediated biomineralization in dental enamel in health and disease. METHODS: Two-dimensional synchrotron X-ray diffraction has been utilized as a sophisticated and useful technique to spatially quantify preferred orientation in mineralized healthy deciduous dental enamel, and the disrupted crystallite organization in enamel affected by a systemic disease affecting bone and dental mineralization (mucopolysaccharidosis Type IVA and Type II are used as examples). The lattice spacing of the hydroxyapatite phase, the crystallite size and aspect ratio, and the quantified preferred orientation of crystallites across whole intact tooth sections, have been determined using synchrotron microdiffraction. RESULTS: Significant differences in mineral crystallite orientation distribution of affected enamel have been observed compared to healthy mineralized tissue. The gradation of enamel crystal orientation seen in healthy tissue is absent in the affected enamel, indicating a continual disruption in the crystallite alignment during mineral formation. CONCLUSIONS: This state of the art technique has the potential to provide a unique insight into the mechanisms leading to deranged enamel formation in a wide range of disease states. CLINICAL RELEVANCE: Characterising crystal orientation patterns and geometry in health and following disruption can be a powerful tool in advancing our overall understanding of mechanisms leading to the tissue phenotypes seen clinically. Findings can be used to inform the appropriate dental management of these tissues and/or to investigate the influence of therapeutic interventions or external stressors which may impact on amelogenesis.