Full-field strain of regenerated bone tissue in a femoral fracture model.

The mechanical behaviour of regenerated bone tissue during fracture healing is key in determining its ability to withstand physiological loads. However, the strain distribution in the newly formed tissue and how this influences the way a fracture heals it is still unclear. X-ray Computed Tomography (XCT) has been extensively used to assess the progress of mineralised tissues in regeneration and when combined with in situ mechanics and digital volume correlation (DVC) has been proven a powerful tool to understand the mechanical behaviour and full-field three-dimensional (3D) strain distribution in bone. The purpose of this study is therefore to use in situ XCT mechanics and DVC to investigate the strain distribution and load-bearing capacity in a regenerating fracture in the diaphyseal bone, using a rodent femoral fracture model stabilised by external fixation. Rat femurs with 1 mm and 2 mm osteotomy gaps were tested under in situ XCT step-wise compression in the apparent elastic region. High strain was present in the newly formed bone (εp1 and εp3 reaching 29 000 µÎµ and -43 000 µÎµ, respectively), with a wide variation and inhomogeneity of the 3D strain distribution in the regenerating tissues of the fracture gap, which is directly related to the presence of unmineralised tissue observed in histological images. The outcomes of this study will contribute in understanding natural regenerative ability of bone and its mechanical behaviour under loading.

Optimization of digital volume correlation computation in SR-microCT images of trabecular bone and bone-biomaterial systems.

A micromechanical characterization of biomaterials for bone tissue engineering is essential to understand the quality of the newly regenerated bone, enabling the improvement of tissue regeneration strategies. A combination of microcomputed tomography in conjunction with in situ mechanical testing and digital volume correlation (DVC) has become a powerful technique to investigate the internal deformation of bone structure at a range of dimensional scales. However, in order to obtain accurate three-dimensional strain measurement at tissue level, high-resolution images must be acquired, and displacement/strain measurement uncertainties evaluated. The aim of this study was to optimize imaging parameters, image postprocessing and DVC settings to enhance computation based on 'zero-strain' repeated high-resolution synchrotron microCT scans of trabecular bone and bone-biomaterial systems. Low exposures to SR X-ray radiation were required to minimize irradiation-induced tissue damage, resulting in the need of advanced three-dimensional filters on the reconstructed images to reduce DVC-measured strain errors. Furthermore, the computation of strain values only in the hard phase (i.e. bone, biomaterial) allowed the exclusion of large artefacts localized in the bone marrow. This study demonstrated the suitability of a local DVC approach based on synchrotron microCT images to investigate the micromechanics of trabecular bone and bone-biomaterial composites at tissue level with a standard deviation of the errors in the region of 100 microstrain after a thorough optimization of DVC computation. LAY DESCRIPTION: Understanding the quality of newly regenerated bone after implantation of novel biomaterials is essential to improve bone tissue engineering strategies and formulation of biomaterials. The relationship between microstructure and mechanics of bone has been previously addressed combining microcomputed tomography with in situ mechanical testing. The addition of an image-based experimental technique such as digital volume correlation (DVC) allows to characterize the deformation of materials in a three-dimensional manner. However, in order to obtain accurate information at the micro-scale, high-resolution images, obtained for example by using synchrotron radiation microcomputed tomography, as well as optimization of the DVC computation are needed. This study presents the effect of different imaging parameters, image postprocessing and DVC settings for as accurate investigation of trabecular bone structure and bone-biomaterial interfaces. The results showed that when appropriate image postprocessing and DVC settings are used DVC computation results in very low strain errors. This is of vital importance for a correct understanding of the deformation in bone-biomaterial systems and the ability of such biomaterials in producing new bone comparable with the native tissue they are meant to replace.

Fast plasma sintering delivers functional graded materials components with macroporous structures and osseointegration properties.

We explored the osseointegration potential of two macroporous titanium surfaces obtained using fast plasma sintering (FPS): Ti macroporous structures with 400-600 µmØ pores (TiMac400) and 850-1000 µmØ pores (TiMac850). They were compared against two surfaces currently in clinical use: Ti-Growth® and air plasma spray (Ti-Y367). Each surface was tested, once placed over a Ti-alloy and once onto a CoCr bulk substrate. Implants were placed in medial femoral condyles in 24 sheep. Samples were explanted at four and eight weeks after surgery. Push-out loads were measured using a material-testing system. Bone contact and ingrowth were assessed by histomorphometry and SEM and EDX analyses. Histology showed early osseointegration for all the surfaces tested. At 8 weeks, TiMac400, TiMac850 and Ti-Growth® showed deep bone ingrowth and extended colonisation with newly formed bone. The mechanical push-out force was equal in all tested surfaces. Plasma spray surfaces showed greater bone-implant contact and higher level of pores colonisation with new bone than FPS produced surfaces. However, the void pore area in FPS specimens was significantly higher, yet the FPS porous surfaces allowed a deeper osseointegration of bone to implant. FPS manufactured specimens showed similar osseointegration potential to the plasma spray surfaces for orthopaedic implants. FPS is a useful technology for manufacturing macroporous titanium surfaces. Furthermore, its capability to combine two implantable materials, using bulk CoCr with macroporous titanium surfaces, could be of interest as it enables designers to conceive and manufacture innovative components. FPS delivers functional graded materials components with macroporous structures optimised for osseointegration.

Intraosseous transcutaneous amputation prostheses versus dental implants: a comparison between keratinocyte and gingival epithelial cell adhesion in vitro.

Infection is the primary failure modality for transcutaneous implants because the skin breach provides a route for pathogens to enter the body. Intraosseous transcutaneous amputation prostheses (ITAP) are being developed to overcome this problem by creating a seal at the skin-implant interface. Oral gingival epithelial cell attachment creates an infection-free seal around dental implants. However, this has yet to be achieved consistently outside of the oral environment. Epithelial cells attach to metal substrates by means of hemidesmosomes and focal adhesions. Their density per unit cell is an indicator of attachment strength. We postulate that gingival epithelial cells express more hemidesmosomes and focal adhesions at earlier time points, compared with epidermal keratinocytes, and this increased speed and strength of attachment may be the reason why an infection-free seal is often achieved around dental implants but less frequently around ITAP. The aim of this study was to compare epidermal keratinocyte with oral gingival cell attachment on titanium alloy in vitro, to determine whether these two cell types differ in their speed and strength of attachment. We aimed to test the hypothesis that gingival cells up-regulate focal adhesion and hemidesmosome formation at earlier time points compared with extra-oral keratinocytes. To test this hypothesis we cultured epidermal keratinocytes and oral gingival cells on titanium alloy substrates and assessed cell attachment by focal adhesions and hemidesmosome expression at 4, 24, 48 and 72 hours. Formation and expression of hemidesmosomes temporally lagged behind that of focal adhesions in both cell types. Gingival derived cells up-regulated focal adhesion and hemidesmosome expression at earlier time points compared with epidermal keratinocytes. Hemidesmosome expression in oral gingival cells was 3 times greater compared with epidermal keratinocytes at 4 hours. Our findings indicate that earlier attachment may be key to the success of the dental implant transcutaneous interface.

A biodegradable antibiotic-impregnated scaffold to prevent osteomyelitis in a contaminated in vivo bone defect model.

Open fractures are at risk of serious infection and, if infected, require several surgical interventions and courses of systemic antibiotics. We investigated a new injectable formulation that simultaneously hardens in vivo to form a porous scaffold for bone repair and delivers antibiotics at high concentrations to the local site of infection. Duration of antimicrobial activity against Staphylococcus aureus was determined using the serial plate transfer test. Ultimate compressive strength and porosity of the material was measured with and without antibiotics. The material was evaluated in vivo in an ovine medial femoral condyle defect model contaminated with S. aureus. Sheep were sacrificed at either 2 or 13 weeks and the defect and surrounding bone assessed using micro-computed tomography and histology. Antimicrobial activity in vitro persisted for 19-21 days. Sheep with antibiotic-free material and bacteria became infected, while those with antibiotic-containing material and bacteria did not. Similarly, new bone growth was seen in uninoculated animals with plain polymer, and in those with antibiotic polymer with bacteria, but not in sheep with plain polymer and bacteria. The antibiotic-impregnated scaffolds were effective in preventing S. aureus infections whilst supporting bone growth and repair. If translated into clinical practice, this approach might reduce the need for systemic antibiotics.

Custom-made rotating hinge total knee replacement in a patient with congenital tibial deficiency avoids the need for amputation.

We report a unique case of a patient with type 2 congenital tibial deficiency and disabling knee osteoarthritis in whom a custom-made rotating hinge knee replacement was successfully performed, allowing continued mobilisation with a below-knee prosthesis, thereby avoiding the need for an above-knee amputation. Level of evidence Therapeutic study, Level IV.

Custom rotating-hinge total knee replacement in patients with spina bifida and severe neuromuscular dysfunction.

Spina bifida (SB) is a congenital disorder which may result in a number of musculoskeletal problems. Total knee replacement (TKR) in this patient group is technically demanding due to bone deformity, soft tissue contracture, muscle tone abnormality and ligament insufficiency. This is a retrospective review of three patients with SB and disabling knee arthritis who were managed with a custom rotating-hinge (RHK) total knee system. All patients reported an improvement in knee pain and stability at mean follow-up 47 months (43-53). Mean Oxford Knee score improved from 21 preoperatively to 32 at final follow-up. One patient required revision of tibial and patella components at 37 months for lateral patella instability and excessive wear. Custom RHK for patients with SB, severe neuromuscular dysfunction and bone deformity relieves pain, restores stability and improves early knee function; however there is a significant risk of extensor mechanism complications and functional outcome is worse than primary TKR in the general population.

A novel closed-loop electromechanical stimulator to enhance osseointegration with immediate loading of dental implant restorations.

The degree of osseomechanical integration of dental implants is acutely sensitive to their mechanical environment. Bone, both as a tissue and structure, adapts its mass and architecture in response to loading conditions. Therefore, application of predefined controlled loads may be considered as a treatment option to promote early maturation of bone/implant interface prior to or in conjunction with crown/prosthesis attachment. Although many studies have established that the magnitude, rate of the applied strain, and frequency have significant effects on the osteogenic response, the actual specific relationships between strain parameters and frequency have not yet been fully defined. The purpose of this study was to develop a stimulator to apply defined mechanical stimuli to individual dental implants in vivo immediately after implantation, exploring the hypothesis that immediate controlled loading could enhance implant integration. An electromechanical device was developed, based on load values obtained using a two-dimensional finite element analysis of the bone/implant interface generating 1000 to 4000 pe and operated at 30 and 3 Hz respectively. The device was then tested in a cadaveric pig mandible, and periosteal bone surface strains were recorded for potential future comparison with a three-dimensional finite element model to determine loading regimens to optimize interface strains and iterate the device for clinical use.

The importance of a thick cement mantle depends on stem geometry and stem-cement interfacial bonding.

The thickness of the cement mantle around the femoral component of total hip replacements is a contributing factor to aseptic loosening and revision. Nevertheless, various designs of stems and surgical tooling lead to cement mantles of different thicknesses. Opinion is divided on whether a thick mantle enhances implant longevity. This study investigates the effect of cement mantle thickness on accumulated damage in the cement, and how this is influenced by the presence or absence of a proximal collar and on whether the stem-cement interface remains bonded. Three-dimensional finite element simulations incorporating creep and non-linear damage accumulation were performed to investigate cracking in the cement mantles around Stanmore Hips under physiologically informed stair-climbing and gait loads. Cement mantle thickness, stem-cement interfacial bonding, and collar design were varied to assess the interactive effects of these parameters. In all cases, damage levels were three to six times higher when the stem-cement interface remained bonded. Cement mantle thickness had little effect on cement damage accumulation around debonded collared stems but was critical in both bonded and collarless cases, where a thicker mantle reduced cement cracking. Damage around a smooth debonded stem with a collar is thus much less sensitive to cement thickness than around bonded or collarless stems.

Design and characterization of a novel permanent magnet synchronous motor used in a growing prosthesis for young patients with bone cancer.

Approximately 50 child sarcomas are treated with limb salvage surgery each year in the United Kingdom. These children need an extendable implant that can be lengthened periodically to keep pace with the growth in the opposite limb. Surgically, invasive devices have been used for the past 30 years with intrinsic problems of infection and long-term recurrent trauma to the patient. To eliminate problems associated with the invasive device, a noninvasive extendable prosthesis was developed. The magnetically coupled drive technology used for this prosthesis was a synchronous motor with a gear-driven telescoping shaft. In this design the motor configuration was in two parts: a rotating magnet (rotor) that fitted inside the prosthesis where space was limited and the stator, which was an external device used to extend the prosthesis remotely as the patient grew. This compact external drive produced a focused magnetic flux that required no cooling and operated on a single-phase power supply. The extending mechanism in the implant was able to overcome up to 1300 N force, which is the tension force exerted by the soft tissues during the lengthening procedure. The device has been successfully implanted in 50 patients.

Composite ceramic bone graft substitute in the treatment of locally aggressive benign bone tumours.

PURPOSE: To report the use of a composite ceramic bone graft substitute containing calcium sulphate and hydroxyapatite (HA) in the treatment of large expansive osteolytic benign bone tumours. METHODS: 4 women and 9 men aged 8 to 49 (mean, 22) years with aneurysmal bone cysts (n=6) or giant cell tumours (n=7) in the epi- or meta-physeal areas of the lower limbs underwent curettage, phenolisation, and filling with bone graft substitute containing calcium sulphate and HA. The mean tumour size was 38.5 (range, 18-65) ml. The patients were followed up for a mean of 41 (range, 33-52) months. Range of movement, Musculoskeletal Tumor Society Rating Score (MTSRS), and haematological and blood biochemical parameters were measured. RESULTS: Two patients had recurrence at 7 and 9 months, both progressed to grade-III giant cell tumours. One underwent revision with an iliac crest autograft, whereas the other underwent en bloc excision and prosthetic replacement. The 11 other lesions displayed clinical and radiological consolidation at a mean of 4.6 (range, 3-7) months. No restriction of range of movement was observed, except in the patient undergoing prosthetic replacement. The mean MTSRS was 96% (range, 83-100%) of that expected for normal function. During the follow-up period, haematological and blood biochemical parameters stayed within normal limits. CONCLUSION: Composite bioceramic osteoconductive grafts, which combine porous HA with calcium sulphate, provide a framework for human osteogenesis and avoid donor-site morbidity (autologous bone graft harvesting). Tumour recurrence remains a major concern especially in young patients, as revision invariably requires removal of additional bone, potentially compromising joint integrity.

The effect of bearing surface on risk of periprosthetic joint infection in total hip arthroplasty: a systematic review and meta-analysis.

AIMS: Periprosthetic joint infection (PJI) is a serious complication of total hip arthroplasty (THA). Different bearing surface materials have different surface properties and it has been suggested that the choice of bearing surface may influence the risk of PJI after THA. The objective of this meta-analysis was to compare the rate of PJI between metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), and ceramic-on-ceramic (CoC) bearings. PATIENTS AND METHODS: Electronic databases (Medline, Embase, Cochrane library, Web of Science, and Cumulative Index of Nursing and Allied Health Literature) were searched for comparative randomized and observational studies that reported the incidence of PJI for different bearing surfaces. Two investigators independently reviewed studies for eligibility, evaluated risk of bias, and performed data extraction. Meta-analysis was performed using the Mantel-Haenzel method and random-effects model in accordance with methods of the Cochrane group. RESULTS: Our search strategy revealed 2272 studies, of which 17 met the inclusion criteria and were analyzed. These comprised 11 randomized controlled trials and six observational studies. The overall quality of included studies was high but the observational studies were at high risk of bias due to inadequate adjustment for confounding factors. The overall cumulative incidence of PJI across all studies was 0.78% (1514/193 378). For each bearing combination, the overall incidence was as follows: MoP 0.85% (1353/158 430); CoP 0.38% (67/17 489); and CoC 0.53% (94/17 459). The meta-analysis showed no significant difference between the three bearing combinations in terms of risk of PJI. CONCLUSION: On the basis of the clinical studies available, there is no evidence that bearing choice influences the risk of PJI. Future research, including basic science studies and large, adequately controlled registry studies, may be helpful in determining whether implant materials play a role in determining the risk of PJI following arthroplasty surgery. Cite this article: Bone Joint J 2018;100-B:134-42.

Fibronectin silanized titanium alloy: a bioinductive and durable coating to enhance fibroblast attachment in vitro.

Long term success of percutaneous implants is dependent on soft tissue attachment to prevent infection and epithelial downgrowth, which leads to failure of the implant. Fibronectin coatings are known to enhance fibroblast attachment in vitro, but are subject to desorption from serum protein competition in vivo. This paper quantifies the binding of fibronectin to titanium alloy by silanization and the durability of this attachment when soaked in protein-rich fluid compared with adsorbed fibronectin. The biological activity of fibronectin bound to silanized titanium alloy was confirmed by analyzing cell area, morphology, immunolocalization of focal contacts, and metabolism of dermal fibroblasts. This was compared with both adsorbed fibronectin and uncoated titanium alloy. Silanized titanium alloy bound over twice the amount of fibronectin compared to untreated titanium alloy. On soaking in fetal calf serum there was no significant loss of fibronectin (p = 0.589) from the silanized surface but a significant 44% loss (p = 0.002) from untreated surfaces. Fibroblasts on silanized fibronectin had significantly larger cell areas and more vinculin focal contact markers when compared to untreated surfaces (p < 0.005). The results confirm the durability of silanized fibronectin from protein competition and bioactive effect on fibroblasts.

Endoprosthetic replacement of the distal humerus following resection of bone tumours.

Between 1988 and 2006, 18 patients had a custom-made endoprosthetic replacement of the distal humerus for bone tumours at our institution. There were 11 primary malignant neoplasms, six secondary deposits, and one benign aggressive tumour. The mean follow-up was for 4.4 years (1 to 18.2). Complications occurred in nine patients and included aseptic loosening in three (16.6%), local recurrence in two (11%), infection in two (11%), neuropraxia of the radial nerve in one (5.5%) and a peri-prosthetic fracture in one (5.5%). Excision was inadequate in four patients (22%), all of which developed local recurrence and/or metastases. There were seven deaths from the primary disease after a mean of 2.3 years (1 to 5), one of whom had an above-elbow amputation for local recurrence seven months before death. The remaining six had satisfactory elbow function at their last follow-up. The 11 living patients were evaluated using the Musculoskeletal Tumour Society and Toronto Extremity Salvage scoring systems. The mean scores achieved were 76% (67% to 87%) and 73% (59% to 79%), respectively. Overall, 17 of 18 patients had significant improvement in the degree of their pain following operation. Custom-made endoprosthetic reconstruction of the elbow for bone tumours is a viable treatment in carefully selected patients. It maintains satisfactory function and provides good pain relief.

Augmenting the bioactivity of polyetheretherketone using a novel accelerated neutral atom beam technique.

Polyetheretherketone (PEEK) is an alternative to metallic implants in orthopedic applications; however, PEEK is bioinert and does not osteointegrate. In this study, an accelerated neutral atom beam technique (ANAB) was employed to improve the bioactivity of PEEK. The aim was to investigate the growth of human mesenchymal stem cells (hMSCs), human osteoblasts (hOB), and skin fibroblasts (BR3G) on PEEK and ANAB PEEK. METHODS: The surface roughness and contact angle of PEEK and ANAB PEEK was measured. Cell metabolic activity, proliferation and alkaline phosphatase (ALP) was measured and cell attachment was determined by quantifying adhesion plaques with cells. RESULTS: ANAB treatment increased the surface hydrophilicity [91.74 ± 4.80° (PEEK) vs. 74.82 ± 2.70° (ANAB PEEK), p < 0.001] but did not alter the surface roughness. Metabolic activity and proliferation for all cell types significantly increased on ANAB PEEK compared to PEEK (p < 0.05). Significantly increased cell attachment was measured on ANAB PEEK surfaces. MSCs seeded on ANAB PEEK in the presence of osteogenic media, expressed increased levels of ALP compared to untreated PEEK (p < 0.05) CONCLUSION: Our results demonstrated that ANAB treatment increased the cell attachment, metabolic activity, and proliferation on PEEK. ANAB treatment may improve the osteointegration of PEEK implants. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1438-1446, 2017.

Modulation of the soft tissue reactions to percutaneous orthopaedic implants.

To evaluate soft tissue reactions and biofilm formation on percutaneous external fixator screws coated with diamond-like carbon (DLC) and hydroxyapatite (HA) coatings on stainless-steel (SS) pins in an ovine loaded osteotomy model, an Orthofix external fixator was used to stabilize a 3-mm tibial midshaft osteotomy with six tapered pins inserted into the right tibia of 32 skeletally mature Friesland ewes. Animals were divided into four groups; SS, fully coated HA, DLC, and HA-coated threads. At 10 weeks, specimens were harvested and the pins were removed en bloc to examine the interfaces between the surface coatings and the tissues. Fully coated HA pins had a significantly higher percentage of dermal contact with the pin surface than HA-coated threads (p=0.028). The presence of a biofilm was evident on all pin surfaces except DLC-coated pins. Significantly greater numbers of bacteria were present on fully coated HA and plain stainless-steel pins compared with DLC. The surface of DLC-coated pins had a significantly lower number of bacterial colonies compared to SS (p=0.028) and fully coated HA pins (p=0.005). Fully coated HA pins have greater dermal attachment to the pin surface than the other pin coatings investigated. DLC-coated pins have the potential to prevent biofilm formation and bacterial colonization that may reduce infection and consequent pin loosening. An external fixator pin that is partially coated with HA to encourage bone and soft tissue integration and with DLC to reduce biofilm formation is advocated.

The novel use of resorbable Vicryl mesh for in vivo tendon reconstruction to a metal prosthesis.

We examined the mechanical properties of Vicryl (polyglactin 910) mesh in vitro and assessed its use in vivo as a novel biomaterial to attach tendon to a hydroxyapatite-coated metal implant, the interface of which was augmented with autogenous bone and marrow graft. This was compared with tendon re-attachment using a compressive clamp device in an identical animal model. Two- and four-ply sleeves of Vicryl mesh tested to failure under tension reached 5.13% and 28.35% of the normal ovine patellar tendon, respectively. Four-ply sleeves supported gait in an ovine model with 67.05% weight-bearing through the operated limb at 12 weeks, without evidence of mechanical failure. Mesh fibres were visible at six weeks but had been completely resorbed by 12 weeks, with no evidence of chronic inflammation. The tendon-implant neoenthesis was predominantly an indirect type, with tendon attached to the bone-hydroxyapatite surface by perforating collagen fibres.

Validation of the soft tissue restraints in a force-controlled knee simulator.

In vitro testing of total knee replacements (TKRs) is important both at the design stage and after the production of the final components. It can predict long-term in vivo wear of TKRs. The two philosophies for knee testing are to drive the motion by displacement or to drive the motion by force. Both methods have advantages and disadvantages. For force control an accurate simulation of soft tissue restraints is required. This study was devised to assess the accuracy of the soft tissue restraints of the force-controlled Stanmore knee simulator in simulating the restraining forces of the anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL). In order to do this, human cadaver knee joints were subjected to the ISO Standard Walking Cycle. The resulting kinematics were monitored when the soft tissue structures were intact, when the ACL and PCL were resected, and when they were simulated by springs positioned anteriorly and posteriorly. The stiffness of the springs was determined from the literature. Two different stiffnesses of springs were used which were 7.24 N/mm (designated as soft springs) and 33.8 N/mm (designated as hard springs). All the intact knees showed displacements that were within the range of the machine. Cutting the ACL and PCL resulted in anterior and posterior motion and internal external rotation that were significantly greater than the intact knee. Results showed that when the ACL and PCL were cut hard springs positioned anterior and posterior to the knee returned the knee to near normal anterior-posterior (AP) motion. Using hard springs in the posterior position in any condition reduced rotational displacements. Therefore using springs in a force-controlled simulator is a compromise. More accuracy may be obtained using springs that are of intermediate stiffness.

Histological evaluation of two designs of shoulder surface replacement implants.

AIMS: To assess the extent of osteointegration in two designs of shoulder resurfacing implants. Bony integration to the Copeland cylindrical central stem design and the Epoca RH conical-crown design were compared. PATIENTS AND METHODS: Implants retrieved from six patients in each group were pair-matched. Mean time to revision surgery of Copeland implants was 37 months (standard deviation (sd) 23; 14 to 72) and Epoca RH 38 months (sd 28; 12 to 84). The mean age of patients investigated was 66 years (sd 4; 59 to 71) and 58 years (sd 17; 31 to 73) in the Copeland and Epoca RH groups respectively. None of these implants were revised for loosening. RESULTS: Increased osteointegration was measured under the cup in the Copeland implant group with limited bone seen in direct contact with the central stem. Bone adjacent to the Epoca RH implants was more uniform. CONCLUSION: This difference in the distribution of bone-implant contact and bone formation was attributed to the Epoca implant's conical crown, which is positioned in more dense peripheral bone. The use of a central stem may not be necessary provided there is adequate peripheral fixation within good quality humeral bone. TAKE HOME MESSAGE: Poor osteointegration of cementless surface replacement shoulder prosthesis may be improved by implant design.

The effect of using components from different manufacturers on the rate of wear and corrosion of the head-stem taper junction of metal-on-metal hip arthroplasties.

AIMS: Surgeons have commonly used modular femoral heads and stems from different manufacturers, although this is not recommended by orthopaedic companies due to the different manufacturing processes. We compared the rate of corrosion and rate of wear at the trunnion/head taper junction in two groups of retrieved hips; those with mixed manufacturers (MM) and those from the same manufacturer (SM). MATERIALS AND METHODS: We identified 151 retrieved hips with large-diameter cobalt-chromium heads; 51 of two designs that had been paired with stems from different manufacturers (MM) and 100 of seven designs paired with stems from the same manufacturer (SM). We determined the severity of corrosion with the Goldberg corrosion score and the volume of material loss at the head/stem junction. We used multivariable statistical analysis to determine if there was a significant difference between the two groups. RESULTS: We found no significant difference in the corrosion scores of the two groups. The median rate of material loss at the head/stem junction for the MM and SM groups were 0.39 mm(3)/year (0.00 to 4.73) and 0.46 mm(3)/year (0.00 to 6.71) respectively; this difference was not significant after controlling for confounding factors (p = 0.06). CONCLUSION: The use of stems with heads of another manufacturer does not appear to affect the amount of metal lost from the surfaces between these two components at total hip arthroplasty. Other surgical, implant and patient factors should be considered when determining the mechanisms of failure of large diameter metal-on-metal hip arthroplasties. Cite this article: Bone Joint J 2016;98-B:917-24.