RESUMEN
Bispidine based Hg(II) coordination polymers of helical topology CP-MeOH and CP-EtOH are almost isostructural (they mainly differ for the solvent included in their lattice and by a small % in unit cell parameters) but they differ for everything else: i) their intrinsic stability, ii) their ability to adsorb solvents upon prior evacuation, iii) their accessible structural transformations. In particular, one of the two starting materials, once evacuated, is capable to adsorb methanol from atmospheres containing binary and ternary mixtures of volatile organic compounds (MeOH, CHCl3 and EtOH) under ambient conditions (25 °C, 1â atm) and with a marked selectivity. The other one is not, but undergoes a 1D to 2D dimensionality change which can be monitored inâ situ by SC-XRD through a SC-to-SC process.
RESUMEN
The assembly of aryl boronic acids B with quinones Q into columnar mixed stacked materials, as previously observed in the solid-state, has been here subjected to a detailed theoretical analysis focusing on the properties of the isolated synthons (HOMO-LUMO energies, electron affinity, ionization potential, reorganization hole/electron energies, partial Hirshfeld atomic charges and conformation stabilities) as well as those of the 1 : 1 adducts (Hirshfeld analysis, IRI surfaces, Hirshfeld atomic charges, hydrogen bond and slipped stacked π-π contributions). The overall picture obtained throught this study shows an intricate pattern of interconnected factors contributing to the formation and stability of the Bx Qy adducts, and it unveils the importance of parameters such as HOMO-LUMO gap, polarization and charge transfer, in addition to the more evident hydrogen bond and slipped-stacked π-π interactions in the formation of 1 : 1 adducts. An explanation has been also given for the presence in some Bx Qy adducts of the rare anti-anti conformation for the BO-H group with respect to the most studied and common anti-syn conformation.
RESUMEN
One-dimensional (1D) coordination polymers (CPs) featuring three different topologies, comprising zig-zag, ribbon-like and poly-[n]-catenane structures, were obtained by reaction of Hg(II) ions with a novel bispidine ligand L3, and structurally characterized by SC- and P-XRD methods. The CPs obtained in the form of microcrystalline powders were tested for their ability to undergo solvent adsorption and exchange by P-XRD and 1 Hâ NMR spectroscopy. The extent of their dynamic behavior was then correlated to their structural features, highlighting the role of interchain interactions established among their constituting linear arrays. Zig-zag CPs proved to be resilient to external chemical stimuli, while they differently respond to thermal treatments, depending on the solvent originally included within the CP. In the case of polycatenated structures, we observed transformations where the original topology was maintained upon guest exchange, but also cases where it changed to zig-zag, even under solid/vapor conditions (i. e., no complete dissolution of the CP). Given the presence of linear interconnected 1D channels, 3 â ClBz-polycatenanePwd is also able to trap volatile guests such as n-hexane when exposed to its vapors.
RESUMEN
Cyanostilbene-based derivatives 1-3 were designed, synthesized and fully characterized. By screening their gelating abilities, we observed that the subtle difference in the position of the pyridine nitrogen greatly affected the resulting fluorescence and gelation properties. Notably, 1 was found to be a versatile ambidextrous gelator capable of forming organo-, hydro-, and Cu(ii) specific metallogels. Furthermore, a rare organogel-to-metallogel transformation at room temperature was also observed upon exposure of the 1-DMSO/H2O gel to aqueous Cu(ii). This process, accompanied by colour and fluorescence changes, provides an effective strategy for the preparation of novel sensing soft materials.
RESUMEN
Diuranyl bis(salophen) complex 1 features a relatively slow conformational motion, induced by an intramolecular OâUâO···UO2 binding motif, which interconverts the two nonsymmetric halves of the ligand. This flipping motion, which constitutes one of the fundamental molecular motions, can be completely halted by addition of fluoride anion, which is bound to 1, reaching one of the highest affinities reported to date. This system represents a model to study flipping dynamics in light of the possibility of developing novel types of molecular machines based on it.
RESUMEN
Ligands L1 and L2 have been designed, synthesized, and used to build for the first time bispidine-based coordination polymers (CPs) in combination with MnII . The novel CPs have been structurally characterized by single-crystal (SC) and powder X-ray diffraction (P-XRD) techniques, showing that they are composed of 1D ribbon-like chains that adopt various arrangements depending on the trapped solvent species. These materials show highly dynamic behavior as they undergo heterogeneous solid/liquid and solid/vapor multiple solvent exchange processes, comprising crystalline-amorphous-crystalline, selective adsorption and SC-to-SC transformations, where major structural reorganization of the 1D ribbons are observed. By tuning inter-ribbon interactions through expansion of the ligand's accessible surface, the dynamic behavior can be effectively modulated.
RESUMEN
A new class of lipophilic N-hydroxyphthalimide (NHPI) catalysts designed for the aerobic oxidation of cumene in solvent-free conditions was synthesized and tested. The specific strategy proposed for the introduction of lipophilic tails on the NHPI moiety leads to lipophilic catalysts that-while completely preserving the activity of the precursor-allow the catalytic oxidation to be conducted in neat cumene, for the first time. The corresponding cumyl hydroperoxide is obtained in good yields (28-52 %) and with high selectivity (95-97 %), under mild conditions. Importantly, the presence of a polar solvent is no longer required to guarantee complete solubilization of the catalyst. On the other hand, the oxidation conducted in neat cumene reveals the unexpected necessity of using small amounts of acetonitrile to fully promote the hydrogen atom transfer process and prevent the catalyst from detrimental hydrogen-bond (HB) driven aggregation.
RESUMEN
PURPOSE: To optimize signal-to-noise ratio (SNR) in fast spin echo (rapid acquisition with relaxation enhancement [RARE]) sequences and to improve sensitivity in ¹9F magnetic resonance imaging (MRI) on a 7T preclinical MRI system, based on a previous experimental evaluation of T1 and T2 actual relaxation times. MATERIALS AND METHODS: Relative SNR changes were theoretically calculated at given relaxation times (T1, T2) and mapped in RARE parameter space (TR, number of echoes, flip back pulse), at fixed acquisition times. T1 and T2 of KPF6 phantom samples (solution, agar mixtures, ex vivo perfused brain) were measured and experimental SNR values were compared with simulations, at optimal and suboptimal RARE parameter values. RESULTS: The optimized setting largely depended on T1, T2 times and the use of flip back pulse improved SNR up to 30% in case of low T1/T2 ratios. Relaxation times in different conditions showed negligible changes in T1 (below 14%) and more evident changes in T2 (-95% from water solution to ex vivo brain). Experimental data confirmed theoretical forecasts, within an error margin always below 4.1% at SNR losses of ~20% and below 8.8% at SNR losses of ~40%. The optimized settings permitted a detection threshold at a concentration of 0.5 mM, corresponding to 6.22 × 10¹6 fluorine atoms per voxel. CONCLUSION: Optimal settings according to measured relaxation times can significantly improve the sensitivity threshold in ¹9F MRI studies. They were provided in a wide range of (T1, T2) values and experimentally validated showing good agreement.
Asunto(s)
Algoritmos , Encéfalo/anatomía & histología , Encéfalo/metabolismo , Radioisótopos de Flúor/farmacocinética , Interpretación de Imagen Asistida por Computador/métodos , Imagen por Resonancia Magnética/métodos , Animales , Simulación por Computador , Cobayas , Aumento de la Imagen/métodos , Técnicas In Vitro , Imagen por Resonancia Magnética/instrumentación , Modelos Biológicos , Imagen Molecular/métodos , Fantasmas de Imagen , Protones , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Procesamiento de Señales Asistido por ComputadorRESUMEN
The fluoride anion has recently gained well deserved attention among the scientific community for its importance in many fields of human activities, but also for concerns on its effect on health and the environment. Although surprisingly overlooked in systematic studies in the past, fluoride has nowadays become a topical target in the field of anion recognition. A multitude of scientific reports are published every year where the establishment of efficient and specific interaction with fluoride is sought in polar and aqueous media. Here, the emphasis is directed to a detailed description of the most interesting contemporary studies in the field, with a particular focus given to those published in the last few years.
Asunto(s)
Fluoruros/química , Aniones/química , Cristalografía por Rayos X , Humanos , Enlace de Hidrógeno , Conformación Molecular , Soluciones/química , Agua/químicaRESUMEN
Isomeric pyridyloxalamide derivatives 1-3, which differed in the position of the nitrogen atom on the pyridyl ring, showed remarkably different gel-forming aptitudes in the presence of CuCl2 salt in alcohols. Whilst derivatives 1 and 3 formed a soluble complex and a solid precipitate, respectively, ligand 2 generated a remarkably metal- and anion-specific metallogel.
RESUMEN
Receptor 1, composed of two deoxycholic acid moieties appended to a Zn-salophen complex, was prepared, characterized and tested for anion binding by (1)H NMR and UV-vis spectroscopic techniques. While in polar DMSO, 1 is able to bind phosphate (K = â¼700 M(-1)), the addition of water severely diminishes the association. In a 1 : 9 water-DMSO mixture, the binding constant K is only ca. 20 M(-1). Notably, in an aqueous solution of CTABr micelles (CTABr 10 mM, cmc = â¼1 mM), the zinc-salophen conjugate 1, due to its two non-polar bile-acid moieties, becomes solubilized and, most importantly, it almost completely recovers its binding ability towards phosphate, displaying a remarkable affinity (K = â¼450 M(-1)) in water.
RESUMEN
From being a niche area only a few decades ago, fluorous chemistry has gained momentum and is, nowadays, a fervent area of research. It has brought forth, in fact, numerous applicative innovations that stretch among different fields: from catalysis to separation science, from supramolecular to materials and analytical chemistry. Recently, the unique features of perfluorinated compounds have reached the attention of the biochemists' audience. This tutorial review introduces the basic concepts of fluorous chemistry and illustrates its main biomolecular applications. Special attention has been given to fluorous microarrays and their combination with Mass-Spectroscopy (MS) techniques, to protein properties modification by the introduction of local fluorous domains, and to the most recent applications of (19)F-Magnetic Resonance Imaging ((19)F-MRI).
Asunto(s)
Flúor/química , Carbohidratos/química , Imagen por Resonancia Magnética , Espectrometría de Masas , Análisis por Micromatrices , Proteínas/químicaRESUMEN
The increasing demand of species for the efficient capture and sensing of anions benefits from a systematic study of anion binding capabilities in the solid state. This work reports a detailed crystallographic study of ten structurally related podands and shows that these charged receptors bind anions with a combination of charge-assisted halogen and hydrogen bonds. Computational tools helped in highlighting the role of the different involved interaction and afforded possible design principles for the design of improved podands.
RESUMEN
A detailed (1)H-NMR study of the anion binding properties of the 2-iodo-imidazolium receptor 1 in DMSO allows to fully attribute the observed affinities to strong charge-assisted C-I···X(-) halogen bonding (XB). Stronger binding was observed for oxoanions over halides. Phosphate, in particular, binds to 1 with an association constant of ca. 10(3) M(-1), which is particularly high for a single X-bond. A remarkably short C-I···O(-) contact is observed in the structure of the salt 1·H(2)PO(4)(-).
Asunto(s)
Halógenos/química , Imidazoles/química , Compuestos de Yodo/química , Aniones/química , Sitios de Unión , Enlace de Hidrógeno , Modelos Moleculares , Fosfatos/químicaRESUMEN
Ditopic salophen-UO(2) receptors 1-4 and 7 co-crystallize with tetramethylammonium (TMA) chloride and fluoride salts producing good quality crystals amenable for X-ray diffraction characterization. The arrangement of the receptor and salt units in the crystal lattice is such that tetrameric ball-shaped assemblies are formed, where an inner cluster of four TMA cations are surrounded by an outer shell of four UO(2)-bound anions. These elaborate architectures, which occur in all cases, regardless of a certain degree of structural modification on the receptors, lead to lattices that belong to non-centrosymmetric (NCS) space groups. Interestingly, the tetragonal symmetry of the tetrameric ball-shaped assemblies is either retained (I4Ì ) or lost (R3c and I4Ì 3d) at the lattice level, without compromising the NCS nature of the crystal lattices. The principal X-ray investigation on TMAX (X = Cl/F) co-crystals, that is, 1-(TMA)Cl, 2-(TMA)Cl, 3-(TMA)Cl, 4-(TMA)Cl, 7-(TMA)Cl, and 7-(TMA)F, is accompanied by NMR and electrospray ionization (ESI) mass spectrometry studies to gather additional insight on the modality of formation of the solid state structures observed. The important role of cation-π interactions in the receptor-salt recognition process is renewed and strengthened by comparison with NMR titration data with a novel reference compound, the salophen-UO(2) complex 8. Given the importance of NCS and polar crystalline solids in the development of functional materials, this study shows that this property can be introduced into elaborate host-guest systems, as those which assemble in the architectures described here, thus expanding its field of applicability.
RESUMEN
THE SERIES OF HALOANILINIUM AND HALOPYRIDINIUM SALTS: 4-IPhNH3Cl (1), 4-IPhNH3Br (5), 4-IPhNH3H2PO4 (6), 4-ClPhNH3H2PO4 (8), 3-IPyBnCl (9), 3-IPyHCl (10) and 3-IPyH-5NIPA (3-iodopyridinium 5-nitroisophthalate, 13), where hydrogen or/and halogen bonding represents the most relevant non-covalent interactions, has been prepared and characterized by single crystal X-ray diffraction. This series was further complemented by extracting some relevant crystal structures: 4-BrPhNH3Cl (2, CCDC ref. code TAWRAL), 4-ClPhNH3Cl (3, CURGOL), 4-FPhNH3Cl (4, ANLCLA), 4-BrPhNH3H2PO4, (7, UGISEI), 3-BrPyHCl, (11, CIHBAX) and 3-ClPyHCl, (12, VOQMUJ) from Cambridge Structural Database for sake of comparison. Based on the X-ray data it was possible to highlight the balance between non-covalent forces acting in these systems, where the relative strength of the halogen bonding C-X...Aâ» (X = I, Br or Cl) and the ratio between the halogen and hydrogen bonds [C-X...Aâ» : D-H...Aâ»] varied across the series.
RESUMEN
Here we report novel bispidine-based coordination polymers (CPs) 2·TCM, 3·TCM, 3·NB, 5·TCM and 5·TCM·NB, of compostition [Mn(Cl)2(L2)2·(TCM)2], [Mn(Cl)2(L3)2·(TCM)5], [Mn(Cl)2(L3)2·(NB)8], [Mn(Cl)2(L5)2·(TCM)4], [Mn(Cl)2(L5)2·(TCM)2·(NB)2], respectively (NB = nitrobenzene; TCM = chloroform). They were obtained starting from novel bispidine ligands L2 (dimethyl 7-isopropyl-3-methyl-9-oxo-2,4-di(pyridin-4-yl)-3,7-diazabicyclo[3.3.1]nonane-1,5-dicarboxylate), L3 (dimethyl 7-(cyclohexylmethyl)-3-methyl-9-oxo-2,4-di(pyridin-4-yl)-3,7-diazabicyclo[3.3.1]nonane-1,5-dicarboxylate) and L5 (dimethyl 7-(4-(dimethylamino)benzyl)-3-methyl-9-oxo-2,4-di(pyridin-4-yl)-3,7-diazabicyclo[3.3.1]nonane-1,5-dicarboxylate), The novel CPs were characterized by single crystal X-ray diffraction (SC-XRD), powder X-ray diffraction (PXRD) and thermal analyses (TGA). We describe their structural and dynamic properties in terms of solvent exchange and adsorption processes, and we outline the general trends observed on the basis of a total of 16 X-ray structures (4 new) and 21 microcrystalline powder phases (10 new), which have been obtained so far for CPs by coordination of ligands L1-L5, having different substitution at the N7 position. This large set of CPs comprises monosolvated, bisolvated and desolvated species, and it shows a good demonstration of how small differences in the functionalization of the organic ligand can have a strong impact on the resulting structural and dynamic properties of this class of 1D CPs.
RESUMEN
Pyridine-based bispidine ligands L1-L7, which differ in the substituent at the N7 position of the bispidine scaffold, have been studied by single crystal X-ray diffraction and density functional theory (DFT) calculations, also including solid-state algorithms. Qualitative description of the packing interactions and quantitative data on the stability of each ligand in the solid-state have been employed to draw reasonable predictions on the ligand potential for the formation of linear 1D coordination polymers (CPs) with Mn(ii)Cl2 and on their resulting dynamic properties, in terms of adsorption and solvent exchange capabilities. The basic assumption lies in the fact that volume and polarizability of the ligands would similarly affect packing energies in both molecular solids and CP materials. The results here obtained confirm the data previously reported on CPs (those made from L4 are less dynamic than the ones with L1), but they also allow the prediction that CPs made with L2 and L5 should be more dynamic than expected, while CPs with L6 and L7 should not form altogether. This latter prediction was derived from the analysis of the steric and electronic factors of the ligand substituents on the N7 position and it is further substantiated by the obtainment of a 2 : 1 molecular complex, and not a CP, by crystallization of L6 with MnCl2.
RESUMEN
Fluoride anion recognition is attracting a mounting interest in the scientific community due to its duplicitous nature. It is a useful chemical for many industrial applications, and it has been used in human diet, but, recently it has been accused for several human pathologies. Here we describe the ample panorama of different approaches the chemists world-wide have employed to face the challenge of fluoride binding, and we outline some of the research which in our view can contribute to the development of this field, especially when fluoride binding has to be achieved in highly competitive protic solvents and water.
RESUMEN
Self-assembly via mutual U-coordination of the salophen-UO(2) complex 1 creates a dimeric species which is shown to be useful for metal binding. Indeed, the 1 dimer has affinity for alkali metal cations and, interestingly, a marked selectivity for Li(+), determined by electrospray ionization mass spectrometry and (1)H NMR techniques. X-ray diffraction helped in the elucidation of the dimeric complex structure, which presents a crown-ether-type coordination site, in analogy to the more familiar 12-crown-4, responsible for the metal interaction. Comparison with isomer 2, and the salen derivative 3, increases the understanding of the behavior of such systems in solution and in the solid state.