A case report on para-kala-azar dermal leishmaniasis: an unresolved mystery.

BACKGROUND: Post-kala-azar dermal leishmaniasis (PKDL) is a dermatosis that occurs 2-3 years after an apparently successful treatment of visceral leishmaniasis (VL). In rare cases, PKDL occurs concurrently with VL and is characterized by fever, splenomegaly, hepatomegaly or lymphadenopathy, and poor nutritional status and is known as Para-kala-azar dermal leishmaniasis (Para-KDL). Co-association of active VL in PKDL patients is documented in Africa, but very few case reports are found in South Asia. We present a case of Para-kala-azar Dermal Leishmaniasis (Para-KDL) in a 50-year-old male patient with a history of one primary Visceral Leishmaniasis (VL) and 2 times relapse of Visceral Leishmaniasis (VL). The patient presented with fever, skin lesions, and hepatosplenomegaly. Laboratory tests revealed LD bodies in the slit skin smear and splenic biopsy. The patient was treated with two cycles of Amphotericin B with Miltefosine in between cycles for 12 weeks to obtain full recovery. CONCLUSION: This case report serves as a reminder that Para-kala-azar dermal leishmaniasis can develop as a consequence of prior visceral leishmaniasis episodes, even after apparently effective therapy. Since para-kala-azar is a source of infectious spread, endemics cannot be avoided unless it is effectively recognized and treated.

Natural and anthropogenic contributions to the elemental compositions and subsequent ecological consequences of a transboundary river's sediments (Punarbhaba, Bangladesh).

An anthropogenically less affected transboundary river (Punarbhaba, Bangladesh) was studied to detect associated risks from the combined origin(s) of geochemically and toxicologically significant elements in benthic sediments. A total of 30 river bed sediments were analyzed by instrumental neutron activation analysis targeting the 15 chemical elements viz., Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U. Among the estimated elements, the mean abundances (µg/g) of Rb (136), Sb (0.66), Cs (6.66), Th (14.6), and U (3.92) were 1.4-1.7 times higher than the crustal origin. These elements are primarily responsible for the contaminated state of the Punarbhaba River. The studied area is 'moderately polluted' (Igeo: 2.01 to 0.02) and possesses 'minor enrichment' (EF: 1.98 to 0.48) in terms of the measured elements. The output of statistical analyses projected that the studied elements are geochemically fractionated in an oxidizing environment (U/Th = 0.44) and mostly originated from felsic sources, thus confirming the mineral is comprised of aluminosilicates and alkali feldspar. However, SQGs-based and ecological risk indices invoked minor (Cr: 6.67%) to no potential ecotoxicological threats for Cr, Mn, Co, Zn, As, and Sb. Nonetheless, altered distribution patterns caused by geogenic activities increased Cr and Zn in the environment which may cause toxicity (Cr: 22-53%, Zn: 35-70%), and pose potential ecological risks, specifically in upstream locations (P-2, P-3, P-5). Further, this study broadened the perspective of sediment deposition from fractionation, fluvial transportation, and weathering events beyond the industrial disintegration of elements, which will aid researchers and policymakers to comprehend combined risks from suspended sediments.

Identifying factors affecting irrigation metrics in the Haor basin using integrated Shannon's entropy, fuzzy logic and automatic linear model.

The sustainability of agricultural practices is seriously threatened by the quality of water used for irrigation. This paper aims to evaluate the suitability of irrigation water and identify the region suitable for agricultural use in the Haor basin of Bangladesh using conventional irrigation indices such as sodium adsorption ratio (SAR), percent sodium (Na%), magnesium hazard ratio (MHR), permeability index (PI), and Kelly's ratio (KR), as well as novel irrigation indices such as, Shannon's entropy index for irrigation water quality (EWQ) and fuzzy logic index for irrigation water quality (FIWQI). The main influences of groundwater and surface water parameters on irrigation indices were predicted using automatic linear modeling (ALM). Forty water samples were collected from shallow tube wells, rivers, canals, ponds, and drainage systems within agricultural land sampled and analyzed for cations and anions. SAR and KR show that 52.5% and 60% of the samples exceeded the allowable level, respectively, indicating that they were unsuitable for irrigation. According to EWQI, about 55% of the analyzed samples were of good quality, while 45% were of medium quality. ALM predicted that KR (0.98), Na% (0.87), and MHR (0.14) were the main significant factors affecting SAR and KR. ALM shows that elevated sodium, magnesium, and calcium are the most important factors affecting irrigation water suitability. The EWQI and FIWQI integrated models showed that water from nearly 30% of the sampling sites would need treatment before use. A new suitability map created by overlaying all parameters showed that surface water and some groundwater in the western and southwestern portions are suitable for agriculture. The north-central part is unsuitable for irrigation due to excessive sodium and magnesium levels. This paper will highlight the irrigation pattern for regional water resource use, identify new suitable regions, and improve sustainable agricultural practices in the Haor basin.

Fuzzy logic, geostatistics, and multiple linear models to evaluate irrigation metrics and their influencing factors in a drought-prone agricultural region.

The quality of water used for irrigation is one of the major threats to maintaining the long-term sustainability of agricultural practices. Although some studies have addressed the suitability of irrigation water in different parts of Bangladesh, the irrigation water quality in the drought-prone region has yet to be thoroughly studied using integrated novel approaches. This study aims to assess the suitability of irrigation water in the drought-prone agricultural region of Bangladesh using traditional irrigation metrics such as sodium percentage (NA%), magnesium adsorption ratio (MAR), Kelley's ratio (KR), sodium adsorption ratio (SAR), total hardness (TH), permeability index (PI), and soluble sodium percentage (SSP), along with novel irrigation indices such as irrigation water quality index (IWQI) and fuzzy irrigation water quality index (FIWQI). Thirty-eight water samples were taken from tube wells, river systems, streamlets, and canals in agricultural areas, then analyzed for cations and anions. The multiple linear regression model predicted that SAR (0.66), KR (0.74), and PI (0.84) were the primary important elements influencing electrical conductivity (EC). Based on the IWQI, all water samples fall into the "suitable" category for irrigation. The FIWQI suggests that 75% of the groundwater and 100% of the surface water samples are excellent for irrigation. The semivariogram model indicates that most irrigation metrics have moderate to low spatial dependence, suggesting strong agricultural and rural influence. Redundancy analysis shows that Na+, Ca2+, Cl-, K+, and HCO3- in water increase with decreasing temperature. Surface water and some groundwater in the southwestern and southeastern parts are suitable for irrigation. The northern and central parts are less suitable for agriculture because of elevated K+ and Mg2+ levels. This study determines irrigation metrics for regional water management and pinpoints suitable areas in the drought-prone region, which provides a comprehensive understanding of sustainable water management and actionable steps for stakeholders and decision-makers.

Human health risk assessment of bisphenol A (BPA) through meat products.

Meat and meat products are often consumed in our daily diet, providing essential nutrients. Contamination by chemical hazards, including bisphenol A (BPA) in meat products, is a concern and is continuously monitored. BPA is well-known for its endocrine-disrupting properties, which may cause potential toxicological effects on reproductive, nervous, and immune systems. Dietary consumption is the main route of BPA exposure, and meat products are a major contributor. BPA exposure from meat consumption is the focus of this review. This review found that BPA has been widely detected in canned and non-canned meat products. BPA in canned meat is assumed to be predominantly from migration from can coatings. Relatively low levels are observed in non-canned products, and the source of contamination in these products has yet to be definitively identified. A recent European Food Safety Authority (EFSA) draft opinion has proposed to lower the tolerable daily intake of BPA from 4 µg kg body weight (bw)-1 day-1 to 0.04 ng kg body weight (bw)-1 day-1, therefore potential health risks need to be addressed. This review has investigated potential contamination at the farm, industrial processes, and retail levels. Data gaps in the literature are also identified to improve future food safety in the meat industry. Also, a unified risk assessment strategy has been proposed. Further understanding of BPA migration in meat products is needed as a part of the exposure assessment to reduce potential risk, and more data on the dose-response relationship will help comprehend potential adverse health effects of BPA on humans. This research will inform the public, meat producers and processing industry, and policymakers on potential exposure to BPA and risk reduction measures, thus, ensuring food safety.

Reconciling the geogenic and non-crustal origins of elements in an Indo-Bangla transboundary river, Atrai: Pollution status, sediment quality, and preliminary risk assessment.

This study has been conducted on an anthropogenically less influenced transboundary river (Atrai: Indo-Bangladesh) to comprehend the inherent geochemistry and identify potential elemental sources. In doing so, across the Bangladeshi portion, 30 river-bed samples were culled and studied by neutron activation analysis to quantify the abundances of 15 geochemically and toxicologically significant elementals (Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U). The results revealed that the mean concentrations (µg/g) of Rb (154.6), Cs (7.53), Th (20.90), and U (4.88) were 1.5-2.0 times higher than crustal values. Besides, geo-environmental indices revealed 'uncontaminated to moderately contaminated' pollution status with minor enrichment or contamination for Rb, Th, Sb, U, and Cs, relatively concentrated in the mid-to-downstream zone possessed geogenic and non-crustal origins. The positive matrix factorization and other statistical approaches revealed predominant geogenic enrichment of Na, K, Al, Ti, Zn, Cs, Rb, As, Th, and U from differential mineralogical compositions via weathering, elemental fractionations, and biogeochemical mobilization. Contrariwise, several anthropogenic sources (for Cr, Sb, Co, Mn, Th) were also ascertained in the vicinity of Atari River. However, sediment characterization based on SQG threshold values manifested that Cr and Mn possess rare biological effects on local aquatic organisms. Nevertheless, SQGs-based and ecological risk indices invoked minor to no potential ecotoxicological intimidations for the considered metal(oid)s (Cr, Mn, Co, Zn, As, and Sb). Hence, this study manifested the usefulness of a less anthropogenically affected river to reckon geogenic and non-crustal elemental origins in the compounded riverine sediment.

Chromium Contamination from Tanning Industries and Phytoremediation Potential of Native Plants: A Study of Savar Tannery Industrial Estate in Dhaka, Bangladesh.

Tannery wastewater is a significant cause of chromium (Cr) contamination in land and water. This study assessed Cr contamination caused by the discharge of tannery wastewater in the Dhaleshwari River and identified possible native plants for phytoremediation of Cr. Water, soil and sediments samples were collected from upstream and downstream of the wastewater discharge channel of Savar tannery industrial estate situated on the bank of the river. Samples of root, stem, leaf and fruit of four selected plants (i.e., Eichhornia crassipes, Xanthium strumarium L., Cynodon dactylon, Croton bonplandianum Baill.) were also collected from those sampling points. The total Cr in acid digested samples were determined by flame atomic absorption spectrometry. High concentrations of Cr were detected in the water, soil and sediment samples collected near the wastewater discharge channel. Of all the plant species, Xanthium strumarium L. exhibited high translocation factors (TF) and bioconcentration factors (BCF) for Cr. Based on the findings of this study Xanthium strumarium L. is preferable as a native species for phytoremediation of Cr.

Water, sanitation, hygiene and waste disposal practices as COVID-19 response strategy: insights from Bangladesh.

The COVID-19 pandemic has caused a global emergence, and the absence of a proven vaccine or medicine has led to the implementation of measures to prevent and control the spread of the virus. Wearing protective equipment like mask and gloves, washing hands via soap, frequent use of antiseptic solution and maintaining social distance are being applied globally to reduce the transmission rate. Therefore, this study was intended to investigate water, sanitation and hygienic (WASH) behaviour, protective equipment use and their disposal practices among Bangladeshi residents amid the COVID-19 pandemic. Based on the study aims, data were collected mainly via an online survey and analysed through a set of statistical tools including T test, one-way ANOVA and principal component analysis (PCA). This study found that almost 89.80% of the respondents reported to know about the COVID-19 and its preventive measures. WASH status of the respondents is found quite good, where 94.60% stated to have available potable water, 99% have improved toilet facilities, 95% wash their hands via soap, and 79.80% clean their house and toilets by antiseptic solutions properly. Moreover, nearly 94.50% and 54.80% people reported to use face mask and hand gloves, respectively, but the disposal practice of these protective equipment is inappropriate. More than 50% of people reported disposing of their used mask, gloves and tissue with other household wastes, which is alarming for public health and environmental perspective. Moreover, the WASH and waste disposal practices of the marginal people were found very poor and not at a satisfactory level. The results of statistical analysis focused on WASH and waste disposal practices as well as the factors which influence these practices. It is found that gender, occupation, area of residence, and level of education of the participants mainly influence the WASH and waste disposal practices. It is expected that this study exposed the necessity to introduce proper infectious waste management policy and also the increase in awareness level among mass people regarding the preventive measures of COVID-19 infection to combat against disease transmission and environmental pollution. Supplementary Information: The online version of this article (10.1007/s10668-020-01151-9) contains supplementary material, which is available to authorized users.

Water and Carbon Footprints of Electricity Are Sensitive to Geographical Attribution Methods.

Environmental footprinting methods provide a means to relate the environmental externalities of electricity production to electricity consumers. Although several methods have been developed to connect the environmental footprint of electricity generation to end users, estimates produced by these methods are inherently uncertain due to the impossibility of actually tracing electricity from the point of generation to utilization. Previous studies rarely quantify this uncertainty, even though it may fundamentally alter their findings and recommendations. Here, we evaluate the sensitivity of water and carbon footprints estimates among seven commonly used methods to attribute electricity production to end users. We assess how sensitive water and carbon electricity footprint estimates are to attribution methods, how these estimates change over time, and the main factors contributing to the variability between methods. We evaluate and make available the water and carbon footprints of electricity consumption for every city across the contiguous United States for all assessed methods. We find significant but spatially heterogeneous variability in water and carbon footprint estimates across attribution methods. No method consistently overestimated or underestimated water and carbon footprints for every city. The variation between attribution methods suggests that future studies need to consider how the method selected to attribute environmental impacts through the electrical grid may affect their findings.

Chemical and physicochemical characterization of effluents from the tanning and textile industries in Bangladesh with multivariate statistical approach.

Industrial effluents are one of the foremost concerns relating to the anthropogenic environmental pollution. The effluents from the tanning and textile industries in Dhaka, Bangladesh, were characterized chemically and physicochemically with multivariate statistical techniques. The concentrations of heavy metals viz., Pb, Cd, Cr, Mn, Fe, Ni, Cu, and Zn were determined by atomic absorption spectrometer while concentrations of anions viz., F-, Cl-, NO2-, NO3-, and SO42- were measured by ion chromatograph. The physicochemical parameters viz., temperature, pH, electrical conductivity (EC), salinity, turbidity, dissolved oxygen (DO), and biological oxygen demand (BOD) were measured by a multiparameter meter while total suspended solids (TSS) and total dissolved solids (TDS) were measured gravimetrically. This study showed that effluents from both industries demonstrated high levels of TSS, TDS, EC, and heavy metals. Tannery effluents have lower pH and DO, and higher BOD, Cl-, SO42-, and Cr concentrations while textile dyeing effluents have higher pH, NO2-, and NO3- concentrations, compared to the standard limits promulgated by the Bangladesh government. Multivariate statistical techniques such as cluster analysis and principal component analysis along with the correlation matrices showed significant association among the measured parameters and identified pollution sources as well as effluent types in the study area which could be linked to the processes used in textile dying and tanning industries. This study will be useful for identifying pollutants emanating from the two industries and will guide future industrial aquatic studies where multiple industrial runoffs are concerned.

Piriformis syndrome: a case series of 31 Bangladeshi people with literature review.

AIMS: To describe a series of piriformis syndrome patient among Bangladesh people with literature review. METHODS: Consecutive 31 piriformis syndrome patients were enrolled. Besides history and clinical examination, piriformis muscle thickness was also measured with diagnostic ultrasound (3.5 MHZ). MRI of lumbar spine, X-rays of lumbo-sacral spine, and pelvis were performed in all patients. Statistical Package for the Social Sciences (SPSS), Windows 8.0, was used for statistical calculation, and univariate analysis of primary data was done. Data present with frequency table. For literature review concerning piriformis syndrome we used Embase, Pubmed, Medline, and Cochrane database. RESULTS: A total of 31 patients (21 female) with PS were enrolled, 21 housewives. Mean age 42.2 ± 14.5 years. All presented with buttock pain, aggravating with long sitting (31), lying on the affected side (31), during rising from a chair(24), and forward bending (28). Six reported pain improvement while walking. Gluteal tenderness, positive FAIR test, and Pace sign were elicited in all patients. A palpable gluteal mass was found in 8 cases, gluteal atrophy in 5 other patients. The mean piriformis muscle thickness on the diseased side was more than on the healthy side (13.6 ± 3.7 vs 10.9 ± 1.9, (p > 0.05). Common conditions associated with PS were: preceding fall (9, 29 %), overuse of piriformis muscle, lumbar spinal stenosis, fibromyalgia, intra-muscular gluteal injection, blunt trauma over the buttock, leg length discrepancy and use of rear pocket's wallet. CONCLUSIONS: In Bangladesh piriformis syndrome is more common in female, especially among housewives. A fall often precedes the condition. Piriformis syndrome should be considered as possible diagnosis when sciatica occurs without a clear spine pathology.

A comprehensive evaluation of the contamination scenario and water quality in the gas fields of north-east region, Bangladesh.

Gas fields generate a significant volume of produced water, disposed in the vicinity of gas fields in Bangladesh after processing. It may have a variety of effects on ecology and the environment. This study was conducted to assess the contamination scenario and quality of produced and discharged water from gas fields in northeastern Bangladesh. The physicochemical analyses for this study were performed using standard procedures. Based on the outcomes of the analyzed samples, the current research employs a variety of indexing and statistical approaches to investigate the overall status of the studied water. The physiochemical analysis revealed high electrical conductivity (EC), total dissolved solid (TDS), salinity, and Na contents in both produced and discharged water. No severe cases have been identified, certain metals, such as Fe, Ni, and Cd, have been detected at levels high enough to impact specific index values in some cases. The results of the weighted contamination index (WCI) indicated mild to considerable pollution in the gas field region. The average score of potential ecological risk (PER) reflects minimal ecological risk. The heavy metal toxicity load (HTML) reveals negligible metal pollution in the studied water. The agricultural risk indices displayed increased sodium concentrations and EC, resulting in salinity and sodium risks. The magnesium absorption ratio is within the allowable range. In addition, the average heavy metal pollution index (HMPI) value demonstrates that the produced and discharged water is unsuitable for drinking. The entropy-based water quality index (EWQI) is below the threshold limit (<100) for all samples, indicating satisfactory water quality. This study is an early effort to evaluate the quality of wastewater produced and discharged from gas fields in Bangladesh. The findings of this research will provide valuable insights for future researchers and regulators in effectively managing and mitigating pollution from wastewater.

New therapeutic strategies in osteoarthritis.

Osteoarthritis (OA) is the most prevalent arthritis-type and is a major contributor to chronic joint pain, impaired physical function, and limited mobility. By the end of 2020, a total of 595 million, equal to 7·6% of the global population, had OA; this figure is expected to rise exponentially by 2050. Even while the disorder's intricate pathophysiology is starting to appear intelligible, we are yet to have a cure for the disorder. OA is typically managed with traditional palliative measures, such as topical and systemic analgesics, including non-steroidal anti-inflammatory drugs, therapeutic exercise, and braces. Sometimes, intra-articular glucocorticoids, viscosupplementation, or regenerative interventions provide short-term pain relief and functional improvement; some may require arthroplasty. Researchers continue their efforts to unveil a new therapeutic target to be effective in OA that modifies symptoms and arrests disease progression as well. In the present literature review, insights into new therapeutic strategies in OA, for example, liposome-based dexamethasone, microspore-based triamcinolone, nerve growth factor antagonist, anti-ADAMTS-5 (A Disintegrin And Metalloproteinase Thrombospoidin Motifs - 5), pentosan polysulfate sodium, allogeneic stem cells, C-C chemokine receptor type-4 (CCR4) ligand 17 inhibitor, Wnt-signaling inhibitor, and anti-obesity medications are provided.

Comparison of ultrasound guidance with landmark guidance for symptomatic benefits in knee, hip and hand osteoarthritis: Systematic review and meta-analysis of randomised controlled trials.

Introduction: More than half of the patients with moderate and severe osteoarthritis (OA) report unsatisfactory pain relief, requiring consideration of intra-articular (IA) injections as the second-line management. Ultrasound-guided IA injection has proven evidence of higher accuracy in administering IA injectates into the joints than landmark-guided or blind IA injections. However, questions remain about translating higher accuracy rates of ultrasound-guided injection into better clinical improvements. Therefore, we examined the symptomatic benefits (pain, function and patient satisfaction) of ultrasound-guided injection in knee, hip and hand OA compared with blind injections by synthesising a systematic review and meta-analysis of randomised controlled trials (RCT). Methods: PubMed, Medline and Embase databases were searched for eligible studies from their inception to August 28, 2023. Results: Out of 295 records, our meta-analysis included four RCTs (338 patients with knee OA), demonstrating significant improvement in procedural pain [-0.89 (95% CI -1.25, -0.53)], pain at follow-up [-0.51 (95% CI -0.98, -0.04)] and function [1.30 (95% CI 0.86, 1.73)], favouring ultrasound guidance. One single study showed higher patient satisfaction with ultrasound guidance. Conclusion: Ultrasound-guided IA injection provided superior clinical outcomes compared with landmark-guided IA injection.

Chromium and arsenic bioaccumulation and biomass potential of pink morning glory (Ipomoea carnea Jacq.).

Soil contamination with heavy metals and metalloids is a global concern nowadays. Phytoremediation is an eco-friendly, cost-effective, and sustainable way of mitigating such contamination by utilizing the plants' ability to accumulate, sequester, and stabilize elements. Biomass-producing plants may outperform hyperaccumulators in terms of total elemental removal and offer more cost-effectiveness through their usable biomass. Ipomoea carnea is a wild plant in the Asian region. It is resilient, spreads rapidly in a wide range of soil conditions, and has a high potential for biomass feedstock. In this work, we have tested this plant species for its growth performance and accumulation characteristics of Cr and As. In a pot experiment, the plants could easily grow from rootless stem segments in 2 weeks when garden soils are treated with 100-500 ppm of Cr and 20-300 ppm of As. Plant growth reduction was little at the moderate level of these elements, with a significant accumulation of elements in 45 days. Within this time, in the stems and leaves, the Cr concentrations were found to be 49 and 39 ppm, respectively, when treated with 500 ppm of Cr, whereas the As concentrations were obtained as 83 and 28 ppm, respectively, for the treatment with 300 ppm of As. To estimate the biomass production potential, the plant was grown with a density of 80,000 per ha under normal field conditions (without metal stress). At the harvest, the plants consisted of 80% stems, 11% leaves, and 9% belowground portions on a dry weight basis. The dry weight of stems, leaves, and belowground parts was 31.3%, 17.9%, and 23.7%, respectively. Overall, the estimated biomass was 25.8 Mg/ha/year from three harvests. The ability to regrow from the basal part makes it useful for continuous sequestration of toxic elements over multiple harvests. Our results show that I. carnea could lower Cr and As from contaminated soils and potentially a phytoremediation candidate considering accumulation rate and high amount of usable biomass production.

Assessment of Heavy Metal Contamination and Health Risk Associated with Cultivated Vegetables along Dhaka-Mymensingh Highway, Bangladesh.

The purpose of this research work is to evaluate the degree of eight heavy metals (Fe, Mn, Cu, Zn, Cd, Pb, Cr, and Ni) contamination and health risks of three regularly consumed vegetables (papaya, bottle gourd, and esculent) near one of Bangladesh's busiest roadways, the Dhaka-Mymensingh highway. The heavy metal concentrations in 45 vegetable samples were analyzed using an atomic absorption spectrometer (AAS). These samples were collected from five different sampling sites based on various land use patterns adjacent to the highway. The average concentrations (mg/kg) of Cu, Fe, Mn, Zn, Cr, and Ni were found to be 9.86, 246.8, 16.9, 28.0, 9.02, and 2.02, respectively, for papaya; 14.9, 281.2, 387.6, 49.0, 10.1, and 2.92, respectively, for bottle gourd; and 17.6, 183.4, 107.2, 80.7, 7.98, and 2.34, respectively, for esculent. The mean concentrations of Cr, Zn, and Mn in papaya, bottle gourd, and esculent were higher than the acceptable limit. Correlation analysis revealed a significant positive correlation between Fe-Cu, Zn-Fe, Cu-Fe, and Fe-Zn in papaya; Cu-Zn, Fe-Cr, Zn-Ni, and Cr-Fe in bottle gourd; and Mn-Cr, Mn-Ni, Mn-Fe, and Cr-Ni in esculent, thereby indicating their common anthropogenic sources like agricultural activities, waste from the commercial area, filling station, and vehicular emissions. Health risk assessment through target hazard quotient (THQ) revealed the highest THQ of 9.52 for Cr in bottle gourd, which poses a high non-carcinogenic health risk to the localities upon the intake of these contaminated vegetables. Target cancer risk (TCR) was found to be highest for Cr in papaya (0.013) and bottle gourd (0.014). TCR trends were found for Cr in the following order: bottle gourd > esculent > papaya. This study contributed the greatest concern for both carcinogenic and non-carcinogenic health impacts through ingesting contaminated vegetables.

Impact of vitamin E in improving comfort, moisture management and mechanical properties of flame-retardant treated cotton fabric.

The aim of this study is to analyze the use of vitamin E to enhance fabric's hand feel, moisture management and fabric strength which are affected due to flame retardant finish. Flame retardant treated fabrics typically become stiff, but the addition of Vitamin E along with emulsifier and binding agent through a vertical padding mangle by two times dipping and nipping results a soft fabric without impairing the flammability properties as determined by 45-degree flammability test. The samples were characterized by FTIR spectra, SEM images, and water contact angle. A new characteristics band is appeared at 1455 cm-1 for skeletal vibration of phenyl ring system of alpha tocopherol for Vitamin E measured by Fourier transform infrared spectroscopy (FTIR) that proves the effective attachment of vitamin E with fabric. Hydrophilicity of vitamin E containing sample is discovered after showing 37.629° as a water contact angle at optical tensiometer (Attension theta lite). Additionally, fabric comfort properties, moisture management properties, and mechanical properties were measured by fabric touch tester (FTT), moisture management tester (MMT) machine and tensile strength tester respectively that demonstrate significant affirmative change in almost all indexes of FTT, 43.5 % increase of overall moisture management capacity by MMT and 23 % increase of tear strength by tensile strength tester due to use of vitamin E that effectively compensate lower strength, poor fabric comfort, and low moisture management capability of flame retardant treated fabric.

The path of microplastics through the rare biodiversity estuary region of the northern Bay of Bengal.

Due to its harmful effects on ecosystems and human health, microplastic (MP) pollution has become a significant environmental problem on a global scale. Although MPs' pollution path and toxic effects on marine habitats have been examined worldwide, the studies are limited to the rare biodiversity estuary region of Hatiya Island from the northern Bay of Bengal. This study aimed to investigate the MP pollution path and its influencing factors in estuarine sediments and water in rare biodiversity Hatiya Island in the northern Bay of Bengal. Sixty water and sediment samples were collected from 10 sampling sites on the Island and analyzed for MPs. The abundance of MPs in sediment ranged from 67 to 143 pieces/kg, while the abundance in water ranged from 24.34 to 59 pieces/m3. The average concentrations of MPs in sediment and water were 110.90 ± 20.62 pieces/kg and 38.77 ± 10.09 pieces/m3, respectively. Most identified MPs from sediment samples were transparent (51%), while about 54.1% of the identified MPs from water samples were colored. The fragment was the most common form of MP in both compartments, with a value of 64.6% in sediment samples and 60.6% in water samples. In sediment and water samples, almost 74% and 80% of MP were <0.5 mm, respectively. Polypropylene (PP) was the most abundant polymer type, accounting for 51% of all identified polymers. The contamination factor, pollution load index, polymer risk score, and pollution risk score values indicated that the study area was moderately polluted with MPs. The spatial distribution patterns and hotspots of MPs echoed profound human pathways. Based on the results, sustainable management strategies and intervention measures were proposed to reduce the pollution level in the ecologically diverse area. This study provides important insights into evaluating estuary ecosystem susceptibility and mitigation policies against persistent MP issues.

Bioaccumulation and sources of metal(loid)s in fish species from a subtropical river in Bangladesh: a public health concern.

Toxic metals and freshwater fish's metalloid contamination are significant environmental concerns for overall public health. However, the bioaccumulation and sources of metal(loids) in freshwater fishes from Bangladesh still remain unknown. Thus, the As, Pb, Cd, and Cr concentrations in various freshwater fish species from the Rupsha River basin were measured, including Tenualosa ilisha, Gudusia chapra, Otolithoides pama, Setipinna phasa, Mystus vittatus, Glossogobius giuris, and Pseudeutropius atherinoides. An atomic absorption spectrophotometer was used to determine metal concentrations. The mean concentrations of metal(loids) in the fish muscle (mg/kg) were found to be As (1.53) > Pb (1.25) > Cr (0.51) > Cd (0.39) in summer and As (1.72) > Pb (1.51) > Cr (0.65) > Cd (0.49) in winter. The analyzed fish species had considerably different metal(loid) concentrations with seasonal variation, and the distribution of the metals (loids) was consistent with the normal distribution. The demersal species, M. vittatus, displayed the highest bio-accumulative value over the summer. However, in both seasons, none of the species were bio-accumulative. According to multivariate statistical findings, the research area's potential sources of metal(loid) were anthropogenic activities linked to geogenic processes. Estimated daily intake, target hazard quotient (THQ), and carcinogenic risk (CR) were used to assess the influence of the risk on human health. The consumers' THQs values were < 1, indicating that there were no non-carcinogenic concerns for local consumers. Both categories of customers had CRs that fell below the permissible range of 1E - 6 to 1E - 4, meaning they were not at any increased risk of developing cancer. The children's group was more vulnerable to both carcinogenic and non-carcinogenic hazards. Therefore, the entry of metal(loids) must be regulated, and appropriate laws must be used by policymakers.

Origin, spatial distribution, sediment contamination, ecological and health risk evaluation of trace metals in sediments of ship breaking area of Bangladesh.

Eleven trace metals (Cd, Cr, Fe, Mn, Cu, Ni, Co, Zn, As, Pb, and Ag) in sediments of Bangladesh's ship breaking area were measured by an atomic absorption spectrometer to determine origin, contamination extent, spatial distributions, and associated ecological and human health hazards. This study found considerable quantities of Pb, Cd, Mn, Zn, and Cu when compared with standards and high levels of Pb, Cd, Zn, Cu, As, and Ag contamination according to pollution evaluation indices. Different indices indicate most of the sampling sites were highly polluted. However, spatial distribution maps indicate that trace metals were predominantly deposited in the northern and southern region. The ecological risk index revealed that Cd has the highest while Pb and As had moderate risk. Based on the health index values, Zn for both adults and children were higher than the safe limit while Mn, Pb, Cr, As, Fe, Cu, Ni, and Co for children were close to the threshold. The mean total carcinogenic risk values of Cr, As, and Ni for children and Ni for adults exceeded the permissible threshold. The cancer risk possibilities were further assessed using Monte Carlo simulation. Most trace metals have anthropogenic origins, which were attributed to ship breaking activities.