RESUMEN
BACKGROUND: Visual impairment is a common consequence of neurological impairments, and can impact a person's ability to undertake everyday tasks, affecting their confidence and mental health. Previous qualitative research in the UK has shown inequalities to exist where patients are accessing vision care after stroke, but little is known around the experiences of accessing vision care following other neurological impairments, and a lack of national guidelines prevent standardised care planning. The aim of this qualitative study is to explore the perceptions of vision care after neurological impairment, and to identify possible inequalities and support mechanisms, where it has been possible to access vision care. METHODS: University ethical approval was obtained, and adults with a visual impairment as a result of a neurological impairment were offered an in-depth interview to explore their vision care experiences. Data were collected between April and November 2021 and analysed using iterative, thematic analysis (TA), informed by a social constructionist ideology. RESULTS: Seventeen participants were recruited. Three overarching themes were conceptualised in relation to the participants' perception of vision care: Making sense of the visual impairment; The responsibility of vision care; and Influential factors in care quality perception. CONCLUSION: Inequalities were noted by participants, with most reporting a lack of suitable vision care offered as part of their neurological rehabilitation. Participants were thus burdened with the task of seeking their own support online, and encountered inaccurate and worrying information in the process. Participants noted changes in their identity, and the identity of their family carers, as they adjusted to their vision loss. The findings from this research highlight a need for clinicians to consider the long-term impact of vision loss after neurological impairment, and ensure patients are provided with adequate support and information, and appropriate referral pathways, alleviating this patient burden.
Asunto(s)
Investigación Cualitativa , Trastornos de la Visión , Humanos , Masculino , Femenino , Persona de Mediana Edad , Trastornos de la Visión/psicología , Trastornos de la Visión/terapia , Anciano , Adulto , Enfermedades del Sistema Nervioso/psicología , Enfermedades del Sistema Nervioso/terapia , Reino Unido , Entrevistas como Asunto , Accesibilidad a los Servicios de Salud , Anciano de 80 o más AñosRESUMEN
Corneal ulcers, a leading cause of blindness in the developing world are treated inappropriately without prior microbiology assessment because of issues related to availability or cost of accessing these services. In this work we aimed to develop a device for identifying the presence of Gram-positive or Gram-negative bacteria or fungi that can be used by someone without the need for a microbiology laboratory. Working with branched poly (N-isopropyl acrylamide) (PNIPAM) tagged with Vancomycin, Polymyxin B, or Amphotericin B to bind Gram-positive bacteria, Gram-negative bacteria and fungi respectively, grafted onto a single hydrogel we demonstrated specific binding of the organisms. The limit of detection of the microbes by these polymers was between 10 and 4 organisms per high power field (100X) for bacteria and fungi binding polymers respectively. Using ex vivo and animal cornea infection models infected with bacteria, fungi or both we than demonstrated that the triple functionalised hydrogel could pick up all 3 organisms after being in place for 30 min. To confirm the presence of bacteria and fungi we used conventional microbiology techniques and fluorescently labelled ligands or dyes. While we need to develop an easy-to-use either a colorimetric or an imaging system to detect the fluorescent signals, this study presents for the first time a simple to use hydrogel system, which can be applied to infected eyes and specifically binds different classes of infecting agents within a short space of time. Ultimately this diagnostic system will not require trained microbiologists for its use and will be used at the point-of-care.
Asunto(s)
Resinas Acrílicas/metabolismo , Úlcera de la Córnea/diagnóstico , Infecciones Bacterianas del Ojo/diagnóstico , Infecciones Fúngicas del Ojo/diagnóstico , Hidrogeles/metabolismo , Ligandos , Resinas Acrílicas/química , Anfotericina B/farmacología , Animales , Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Bacterias/metabolismo , Candidiasis/diagnóstico , Candidiasis/microbiología , Úlcera de la Córnea/microbiología , Infecciones Bacterianas del Ojo/microbiología , Infecciones Fúngicas del Ojo/microbiología , Hongos/efectos de los fármacos , Hongos/metabolismo , Humanos , Hidrogeles/química , Pruebas de Sensibilidad Microbiana , Polimixina B/farmacología , Infecciones por Pseudomonas/diagnóstico , Infecciones por Pseudomonas/microbiología , Conejos , Infecciones Estafilocócicas/diagnóstico , Infecciones Estafilocócicas/microbiología , Vancomicina/farmacologíaRESUMEN
Rapid point of care tests for bacterial infection diagnosis are of great importance to reduce the misuse of antibiotics and burden of antimicrobial resistance. Here, we have successfully combined a new class of non-biological binder molecules with electrochemical impedance spectroscopy (EIS)-based sensor detection for direct, label-free detection of Gram-positive bacteria making use of the specific coil-to-globule conformation change of the vancomycin-modified highly branched polymers immobilized on the surface of gold screen-printed electrodes upon binding to Gram-positive bacteria. Staphylococcus carnosus was detected after just 20 min incubation of the sample solution with the polymer-functionalized electrodes. The polymer conformation change was quantified with two simple 1 min EIS tests before and after incubation with the sample. Tests revealed a concentration dependent signal change within an OD600 range of Staphylococcus carnosus from 0.002 to 0.1 and a clear discrimination between Gram-positive Staphylococcus carnosus and Gram-negative Escherichia coli bacteria. This exhibits a clear advancement in terms of simplified test complexity compared to existing bacteria detection tests. In addition, the polymer-functionalized electrodes showed good storage and operational stability.
Asunto(s)
Técnicas Biosensibles , Vancomicina , Bacterias , Espectroscopía Dieléctrica , Técnicas Electroquímicas , Electrodos , Oro , Polímeros , StaphylococcusRESUMEN
Small-angle neutron scattering (SANS) and neutron spin-echo (NSE) have been used to investigate the temperature-dependent solution behaviour of highly-branched poly(N-isopropylacrylamide) (HB-PNIPAM). SANS experiments have shown that water is a good solvent for both HB-PNIPAM and a linear PNIPAM control at low temperatures where the small angle scattering is described by a single correlation length model. Increasing the temperature leads to a gradual collapse of HB-PNIPAM until above the lower critical solution temperature (LCST), at which point aggregation occurs, forming disperse spherical particles of up to 60 nm in diameter, independent of the degree of branching. However, SANS from linear PNIPAM above the LCST is described by a model that combines particulate structure and a contribution from solvated chains. NSE was used to study the internal and translational solution dynamics of HB-PNIPAM chains below the LCST. Internal HB-PNIPAM dynamics is described well by the Rouse model for non-entangled chains.
RESUMEN
The behavior of a linear copolymer of N-isopropylacrylamide with pendant vancomycin functionality was compared to an analogous highly branched copolymer with vancomycin functionality at the chain ends. Highly branched poly(N-isopropylacrylamide) modified with vancomycin (HB-PNIPAM-van) was synthesized by functionalization of the HB-PNIPAM, prepared using reversible addition-fragmentation chain transfer polymerization. Linear PNIPAM with pendant vancomycin functionality (L-PNIPAM-van) was synthesized by functionalization of poly(N-isopropylacrylamide-co-vinyl benzoic acid). HB-PNIPAM-van aggregated S. aureus effectively, whereas the L-PNIPAM-van polymer did not. It was found that when the HB-PNIPAM-van was incubated with S. aureus the resultant phase transition provided an increase in the intensity of fluorescence of a solvatochromic dye, nile red, added to the system. In contrast, a significantly lower increase in fluorescence intensity was obtained when L-PNIPAM-van was incubated with S. aureus. These data showed that the degree of desolvation of HB-PNIPAM-van was much greater than the desolvation of the linear version. Using microcalorimetry, it was shown that there were no significant differences in the affinities of the polymer ligands for d-Ala-d-Ala and therefore differences in the interactions with bacteria were associated with changes in the probability of access of the polymer bound ligands to the d-Ala-d-Ala dipeptide. The data support the hypothesis that generation of polymer systems that respond to cellular targets, for applications such as cell targeting, detection of pathogens etc., requires the use of branched polymers with ligands situated at the chain ends.
Asunto(s)
Acrilamidas/química , Antibacterianos/química , Staphylococcus aureus/efectos de los fármacos , Vancomicina/química , Acrilamidas/farmacología , Antibacterianos/farmacología , Relación Estructura-Actividad , Vancomicina/farmacologíaRESUMEN
Interpolymer complex formation of poly(acrylic acid) with other macromolecules can occur via several mechanisms that vary depending on the pH. At low pH the protonated acid functional group can form bonds with both donor and acceptor moieties, resulting in desolvated structures consisting of two polymers. Complexes were formed in dilute solutions of PAA, functionalised with acenaphthylene, with a range of other polymers including: poly(NIPAM); poly(ethylene oxide) (PEO); poly(dimethylacrylamide) (PDMA); poly(diethyl acrylamide) (PDEAM) poly(vinyl alcohol) (PVA) and poly(vinyl pyrolidinone) (PVP). Fluorescence anisotropy was used to demonstrate complex formation in each case by monitoring the reductions in segmental motion of the chain as the complexes formed. Considerations of the molecular structures of the complexing moieties suggest that solvation energies and pKas play an important role in complex formation.
RESUMEN
PURPOSE: In the study of microbial keratitis, in vivo animal models often require a large number of animals, and in vitro monolayer cell culture does not maintain the three-dimensional structure of the tissues or cell-to-cell communication of in vivo models. Here, we propose reproducible ex vivo models of single- and dual-infection keratitis as an alternative to in vivo and in vitro models. METHODS: Excised rabbit and human corneoscleral rims maintained in organ culture were infected using 108 cells of Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans or Fusarium solani. The infection was introduced by wounding with a scalpel and exposing corneas to the microbial suspension or by intrastromal injection. Post-inoculation, corneas were maintained for 24 and 48 h at 37 °C. After incubation, corneas were either homogenised to determine colony-forming units (CFU)/cornea or processed for histological examination using routine staining methods. Single- and mixed-species infections were compared. RESULTS: We observed a significant increase in CFU after 48 h compared to 24 h with S. aureus and P. aeruginosa. However, no such increase was observed in corneas infected with C. albicans or F. solani. The injection method yielded an approximately two- to 100-fold increase (p < 0.05) in the majority of organisms from infected corneas. Histology of the scalpel-wounded and injection models indicated extensive infiltration of P. aeruginosa throughout the entire cornea, with less infiltration observed for S. aureus, C. albicans and F. solani. The models also supported dual infections. CONCLUSIONS: Both scalpel wounding and injection methods are suitable for inducing infection of ex vivo rabbit and human cornea models. These simple and reproducible models will be useful as an alternative to in vitro and in vivo models for investigating the detection and treatment of microbial keratitis, particularly when this might be due to two infective organisms.
Asunto(s)
Córnea/microbiología , Infecciones Bacterianas del Ojo/diagnóstico , Infecciones Fúngicas del Ojo/diagnóstico , Queratitis/diagnóstico , Animales , Bacterias/aislamiento & purificación , Recuento de Colonia Microbiana , Córnea/patología , Modelos Animales de Enfermedad , Infecciones Bacterianas del Ojo/microbiología , Infecciones Fúngicas del Ojo/microbiología , Hongos/aislamiento & purificación , Humanos , Queratitis/microbiología , Microscopía Fluorescente , Técnicas de Cultivo de Órganos , ConejosRESUMEN
There is a lack of hydrogel materials whose properties can be tuned at the point of use. Biological hydrogels, such as collagen, gelate at physiological temperatures; however, they are not always ideal as scaffolds because of their low mechanical strength. Their mechanics can be improved through cross-linking and chemical modification, but these methods still require further synthesis. We have demonstrated that by combining collagen with a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), the mechanical properties can be improved while maintaining cytocompatibility. Furthermore, different concentrations of this polymer led to a range of hydrogels with shear moduli ranging from 10(5) Pa down to less than 10(2) Pa, similar to the soft tissues in the body. In addition to variable mechanical properties, the hydrogel blends have a range of micron-scale structures and porosities, which caused adipose-derived stromal cells (ADSCs) to adopt different morphologies when encapsulated within and may therefore be able to direct cell fate.
Asunto(s)
Resinas Acrílicas/química , Colágeno/química , Hidrogeles/síntesis química , Reactivos de Enlaces Cruzados/química , Humanos , Hidrogeles/efectos adversos , Hidrogeles/química , Fenómenos Mecánicos , Células Madre Mesenquimatosas/efectos de los fármacos , Resistencia a la TracciónRESUMEN
Fluorescence spectroscopy on a series of aqueous solutions of poly(acrylic acid) containing a luminescent label showed that polymers with molar mass, Mn < 16.5 kDa did not exhibit a pH responsive conformational change, which is typical of higher molar mass poly(acrylic acid). Below this molar mass, polymers remained in an extended conformation, regardless of pH. Above this molar mass, a pH-dependent conformational change was observed. Diffusion-ordered nuclear magnetic resonance spectroscopy confirmed that low molar mass polymers did not undergo a conformational transition, although large molar mass polymers did exhibit pH-dependent diffusion.
RESUMEN
For the first time a series of functional hydrogels based on semi-interpenetrating networks with both branched and crosslinked polymer components have been prepared and we show the successful use of these materials as substrates for cell culture. The materials consist of highly branched poly(N-isopropyl acrylamide)s with peptide functionalised end groups in a continuous phase of crosslinked poly(vinyl pyrrolidone). Functionalisation of the end groups of the branched polymer component with the GRGDS peptide produces a hydrogel that supports cell adhesion and proliferation. The materials provide a new synthetic functional biomaterial that has many of the features of extracellular matrix, and as such can be used to support tissue regeneration and cell culture. This class of high water content hydrogel material has important advantages over other functional hydrogels in its synthesis and does not require post-processing modifications nor are functional-monomers, which change the polymerisation process, required. Thus, the systems are amenable to large scale and bespoke manufacturing using conventional moulding or additive manufacturing techniques. Processing using additive manufacturing is exemplified by producing tubes using microstereolithography.
Asunto(s)
Acrilamidas/química , Arginina/química , Ácido Aspártico/química , Materiales Biocompatibles/química , Glicina/química , Hidrogeles/química , Oligopéptidos/química , Adhesión Celular , Ensayos de Migración Celular , Proliferación Celular , Células Cultivadas , Fibroblastos/citología , Fibroblastos/metabolismo , HumanosRESUMEN
We describe a series of experiments designed to investigate the conformational transition that highly-branched polymers with ligands undergo when interacting with bacteria, a process that may provide a new sensing mechanism for bacterial detection. Fluorescent highly-branched poly(N-isopropyl acrylamide)s (HB-PNIPAM) were prepared by sequential self-condensing radical copolymerizations, using anthrylmethyl methacrylate (AMMA) and fluorescein-O-acrylate (FA) as fluorescent comonomers and 4-vinylbenzyl pyrrole carbodithioate as a branch forming monomer. Differences in reactivity necessitated to first copolymerize AMMA then react with FA in a separate sequential monomer feed step. Modifications of the chain ends produced vancomycin-functional derivatives (HB-PNIPAM-Van). The AMMA and FA labels allow probing of the conformational behaviour of the polymers in solution via Förster resonance energy transfer experiments. It was shown that interaction of this polymer's end groups with Staphylococcus aureus induced a macromolecular collapse. The data thus provide conclusive evidence for a conformational transition that is driven by binding to a bacterium.
Asunto(s)
Resinas Acrílicas/química , Transferencia Resonante de Energía de Fluorescencia/métodos , Conformación Molecular , Staphylococcus aureus/metabolismo , Vancomicina/química , Resinas Acrílicas/síntesis química , Resinas Acrílicas/metabolismo , Fluoresceína/química , Modelos Químicos , Estructura Molecular , Soluciones/química , Temperatura , Vancomicina/metabolismoRESUMEN
Iron oxide nanoparticles (IONPs) surface functionalised with thermo-responsive polymers can encapsulate therapeutic proteins and release them upon heating with an alternating magnetic field above the lower critical solution temperature (LCST). In order to make this delivery system clinically-relevant, we prepared IONPs coated with poly-N-isopropylmethacrylamide (PNIPMAM), a polymer with LCST above human body temperature. The optimal polymer chain length and nanoparticle size to achieve LCST of ca. 45 °C were 19 kDa PNIPMAM and 16 nm IONPs. The PNIPMAM-coated IONPs could encapsulate a range of proteins which were released upon heating above LCST in the presence of a competitor protein or serum. A small amount of encapsulated protein leakage was observed below LCST. The efficiency of protein encapsulation and release was correlated with molecular weight and glycosylation state of the proteins. Magnetic heating resulted in a faster protein release as compared to conventional heating without significant temperature increase of the bulk solution.
Asunto(s)
Nanopartículas de Magnetita , Nanopartículas , Humanos , Polímeros , Temperatura , MagnetismoRESUMEN
Our aim was to synthesize a biomaterial that stimulates angiogenesis for tissue engineering applications by exploiting the ability of heparin to bind and release vascular endothelial growth factor (VEGF). The approach adopted involved modification of a hydrogel with positively charged peptides (oligolysine or oligoarginine) to achieve heparin binding. Precursor hydrogels were produced from copolymerization of N-vinyl pyrolidone, diethylene glycol bis allyl carbonate and acrylic acid (PNDA) and functionalized after activation of the carboxylic acid groups with trilysine or triarginine peptides (PNDKKK and PNDRRR). Both hydrogels were shown to bind and release bioactive VEGF165 with arginine-modified hydrogel outperforming the lysine-modified hydrogel. Cytocompatibility of the hydrogels was confirmed in vitro with primary human dermal fibroblasts and human dermal microvascular endothelial cells (HUDMECs). Proliferation of HUDMECs was stimulated by triarginine-functionalized hydrogels, and to a lesser extent by lysine functionalized hydrogels once loaded with heparin and VEGF. The data suggests that heparin-binding hydrogels provide a promising approach to a pro-angiogenic biomaterial.
Asunto(s)
Inductores de la Angiogénesis/química , Inductores de la Angiogénesis/farmacología , Arginina/química , Hidrogeles/química , Hidrogeles/farmacología , Factor A de Crecimiento Endotelial Vascular/farmacología , Absorción , Análisis de Varianza , Inductores de la Angiogénesis/metabolismo , Inductores de la Angiogénesis/farmacocinética , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Materiales Biocompatibles/farmacología , Proliferación Celular/efectos de los fármacos , Forma de la Célula/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Células Endoteliales/citología , Células Endoteliales/efectos de los fármacos , Fibroblastos/citología , Fibroblastos/efectos de los fármacos , Heparina/química , Heparina/metabolismo , Humanos , Hidrogeles/metabolismo , Lisina/química , Péptidos/química , Péptidos/metabolismo , Análisis Espectral , Factor A de Crecimiento Endotelial Vascular/química , Factor A de Crecimiento Endotelial Vascular/metabolismo , Factor A de Crecimiento Endotelial Vascular/farmacocinéticaRESUMEN
Functional crosslinked hydrogels were prepared from 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AA). The acid monomer was incorporated both via copolymerization and chain extension of a branching, reversible addition-fragmentation chain-transfer agent incorporated into the crosslinked polymer gel. The hydrogels were intolerant to high levels of acidic copolymerization as the acrylic acid weakened the ethylene glycol dimethacrylate (EGDMA) crosslinked network. Hydrogels made from HEMA, EGDMA and a branching RAFT agent provide the network with loose-chain end functionality that can be retained for subsequent chain extension. Traditional methods of surface functionalization have the downside of potentially creating a high volume of homopolymerization in the solution. Branching RAFT comonomers act as versatile anchor sites by which additional polymerization chain extension reactions can be carried out. Acrylic acid grafted onto HEMA-EGDMA hydrogels showed higher mechanical strength than the equivalent statistical copolymer networks and was shown to have functionality as an electrostatic binder of cationic flocculants.
RESUMEN
Vat photopolymerization has garnered interest from pharmaceutical researchers for the fabrication of personalised medicines, especially for drugs that require high precision dosing or are heat labile. However, the 3D printed structures created thus far have been insoluble, limiting printable dosage forms to sustained-release systems or drug-eluting medical devices which do not require dissolution of the printed matrix. Resins that produce water-soluble structures will enable more versatile drug release profiles and expand potential applications. To achieve this, instead of employing cross-linking chemistry to fabricate matrices, supramolecular chemistry may be used to impart dynamic interaction between polymer chains. In this study, water-soluble drug-loaded printlets (3D printed tablets) are fabricated via digital light processing (DLP) 3DP for the first time. Six formulations with varying ratios of an electrolyte acrylate monomer, [2-(acryloyloxy)ethyl]trimethylammonium chloride (TMAEA), and a co-monomer, 1-vinyl-2-pyrrolidone (NVP), were prepared to produce paracetamol-loaded printlets. 1H NMR spectroscopy analysis confirmed the integration of TMAEA and NVP in the polymer, and residual TMAEA monomers were found to be present only in trace amounts (0.71 - 1.37 %w/w). The apparent molecular mass of the photopolymerised polymer was found to exceed 300,000 Da with hydrodynamic radii of 15 - 20 nm, estimated based on 1H DOSY NMR measurements The loaded paracetamol was completely released from the printlets between 45 minutes to 5 hours. In vivo single-dose acute toxicity studies in rats suggest that the printlets did not cause any tissue damage. The findings reported in this study represent a significant step towards the adoption of vat photopolymerization-based 3DP to produce personalised medicines.
Asunto(s)
Acetaminofén , Tecnología Farmacéutica , Animales , Ratas , Acetaminofén/química , Tecnología Farmacéutica/métodos , Impresión Tridimensional , Polímeros/química , Liberación de Fármacos , Comprimidos/químicaRESUMEN
This paper outlined our method for developing polymer-linked contact lens type materials for rapid detection and differentiation of Gram-positive, Gram-negative bacteria and fungi in infected corneas. It can be applied to both model synthetic or ex-vivo corneal models and has been successfully trialed in an initial efficacy tested animal study. First a hydrogel substrate for the swab material is selected, we have demonstrated selective swabs using a glycerol monomethacrylate hydrogel. Alternatively any commercial material with carboxylic acid functional groups is suitable but risks nonspecific adhesion. This is then functionalised via use of N-hydroxysuccinimide reaction with amine groups on the specified highly branched polymer ligand (either individually gram negative, gram positive or fungal binding polymers or a combination of all three can be employed for desired sensing application). The hydrogel is then cut into swabs suitable for sampling, used, and then the presence of gram positive, game negative and fungi are disclosed by the sequential addition of dyes (fluorescent vancomycin, fluorescein isothiocyanate and calcofluor white). In summary this method presents: Method to produce glycerol monomethacrylate hydrogels to minimize nonspecific binding Methods of attaching pathogen binding highly branched polymers to produce selective hydrogel swabs Method for disclosing bound pathogens to this swab using sequential dye addition.
RESUMEN
Polymyxin peptide conjugated to the end groups of highly branched poly(N-isopropyl acrylamide) was shown to bind to a Gram negative bacterium, Pseudomonas aeruginosa . The nonbound polymer had a lower critical solution temperature (LCST) above 60 °C. However, binding caused aggregation, which was disrupted on cooling of the bacteria and polymer mixture. The data indicate that polymer binding of bacteria occurred by interaction of the end groups with lipopolysaccharide and that the binding decreased the LCST to below 37 °C. Cooling then progressed the polymer/bacteria aggregate through a bound LCST into an open polymer coil conformation that was not adhesive to P. aeruginosa .
Asunto(s)
Acrilamidas , Antibacterianos , Polímeros , Polimixina B , Pseudomonas aeruginosa/crecimiento & desarrollo , Acrilamidas/síntesis química , Acrilamidas/química , Acrilamidas/farmacología , Resinas Acrílicas , Antibacterianos/síntesis química , Antibacterianos/química , Antibacterianos/farmacología , Lipopolisacáridos/química , Lipopolisacáridos/metabolismo , Polímeros/síntesis química , Polímeros/química , Polímeros/farmacología , Polimixina B/química , Polimixina B/farmacología , Pseudomonas aeruginosa/química , Pseudomonas aeruginosa/metabolismoRESUMEN
The objective was to investigate corneal re-epithelialisation of surface-modified polymethacrylate hydrogel implants in order to evaluate them as potential materials for an artificial cornea. Polymethacrylate hydrogels were modified with amines and then coated with different extracellular matrix proteins (collagen I, IV, laminin and fibronectin). The modified hydrogels were surgically implanted into bovine corneas maintained in a 3-D culture system for 5 days. The epithelial growth across the implant surface was evaluated using fluorescent, light and electron microscopy. Full epithelialisation was achieved on 1,4-diaminobutane-modified hydrogels after coating with collagen IV. Hydrogels modified with 1,4-diaminobutane but without further coating only showed partial re-epithelialisation. Hydrogels modified with other amines (1,2-diaminoethane or 1,3-diaminopropane) showed only partial re-epithelialisation; further coating with extracellular matrix proteins improved epithelialisation of these surfaces but did not result in complete re-epithelialisation. Evaluation of the corneas implanted with the 1,4-diaminobutane-modified hydrogels coated with collagen IV showed that the artificial corneas remain clear, integrate well and become covered by a healthy stratified epithelium. In conclusion the 1,4-diaminobutane surface-modified hydrogel coated with collagen IV supported the growth of a stable stratified epithelium. With further refinement this hydrogel has the potential to be used clinically for an artificial cornea.
Asunto(s)
Córnea/patología , Epitelio Corneal/metabolismo , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Prótesis e Implantes , Colágeno/química , Matriz Extracelular/metabolismo , Humanos , Hidrogeles/química , Hidrogeles/metabolismo , Inmunohistoquímica/métodos , Microscopía Electrónica de Rastreo/métodos , Microscopía Electrónica de Transmisión/métodos , Fenotipo , Polímeros/química , Ácidos Polimetacrílicos/química , Propiedades de SuperficieRESUMEN
Highly branched poly(N-isopropylacrylamide) (HB-PNIPAM), functionalized with vancomycin at the chain ends, acted as a bacterial adhesive and was incorporated into polyurethane foams to form semi-interpenetrating networks. PNIPAM was labeled with a solvatochromic dye, Nile red. It was found that the thermal response of the polymer was dependent on the architecture, and temperature-dependent color changes were observed within the foam. The foams had open pore structures, and the presence of HB-PNIPAM substantially reduced the shrinkage of the foam as the temperature was increased up to 20 °C. The foams were selectively adhesive for Staphylococcus aureus (Gram-positive bacteria) compared to Pseudomonas aeruginosa (Gram-negative bacteria), and the presence of S. aureus was indicated by increased fluorescence intensity (590-800 nm).