Topical Drug Delivery Systems Based on Bacterial Nanocellulose: Accelerated Stability Testing.

Bacterial nanocellulose (BNC) membranes have enormous potential as systems for topical drug delivery due to their intrinsic biocompatibility and three-dimensional nanoporous structure, which can house all kinds of active pharmaceutical ingredients (APIs). Thus, the present study investigated the long-term storage stability of BNC membranes loaded with both hydrophilic and lipophilic APIs, namely, caffeine, lidocaine, ibuprofen and diclofenac. The storage stability was evaluated under accelerated testing conditions at different temperatures and relative humidity (RH), i.e., 75% RH/40 °C, 60% RH/25 °C and 0% RH/40 °C. All systems were quite stable under these storage conditions with no significant structural and morphological changes or variations in the drug release profile. The only difference observed was in the moisture-uptake, which increased with RH due to the hydrophilic nature of BNC. Furthermore, the caffeine-loaded BNC membrane was selected for in vivo cutaneous compatibility studies, where patches were applied in the volar forearm of twenty volunteers for 24 h. The cutaneous responses were assessed by non-invasive measurements and the tests revealed good compatibility for caffeine-loaded BNC membranes. These results highlight the good storage stability of the API-loaded BNC membranes and their cutaneous compatibility, which confirms the real potential of these dermal delivery systems.

Extraction of High Value Triterpenic Acids from Eucalyptus globulus Biomass Using Hydrophobic Deep Eutectic Solvents.

Triterpenic acids (TTAs), known for their promising biological properties, can be found in different biomass sources and related by-products, such as Eucalyptus globulus bark, and have been extracted using organic volatile solvents such as dichloromethane. Recently, deep eutectic solvents (DES) have been identified as promising alternatives for the extraction of value-added compounds from biomass. In the present work, several hydrophobic DES were tested for the extraction of TTAs from E. globulus bark. Initial solubility studies revealed that DES based on menthol and thymol as the most promising solvents for these compounds given the highest solubilities obtained for ursolic acid (UA) at temperatures ranging from room temperature up to 90 °C. Accordingly, an eutectic mixture of menthol:thymol (1:2) was confirmed as the best candidate for the TTAs extraction from E. globulus outer bark, leading to extraction yields (weight of TTA per weight of biomass) at room temperature of 1.8 wt% for ursolic acid, 0.84 wt% for oleanolic acid and 0.30 wt% for betulinic acid. These values are significantly higher than those obtained with conventional organic solvents under similar conditions. The results obtained using these DES are promising for the recovery of TTAs for nutraceutical and pharmacological applications, while reinforcing the potential of DES as promising solvents to be applied in biorefinery processes.

Biocellulose membranes as supports for dermal release of lidocaine.

Biocellulose (BC) is a highly pure form of cellulose, produced in the form of a swollen membrane, with several applications in the biomedical area. In this study, the behavior of BC membranes as systems for topical delivery of lidocaine was evaluated. The BC-lidocaine membranes were prepared and characterized in terms of structural and morphological properties. A uniform distribution of the drug inside the BC membranes was observed. In vitro diffusion studies with Franz cells were conducted using human epidermal membranes and showed that the permeation rate of the drug in BC membranes was slightly slower than that obtained with the conventional systems, which was attributed to the establishment of interactions between the lidocaine molecules and the BC membrane, as evidenced by FTIR and NMR analysis. These results indicate that this methodology can be successfully applied for the dermal administration of lidocaine regarding the release profile and ease of application.

Multifunctional hybrid structures made of open-cell aluminum foam impregnated with cellulose/graphene nanocomposites.

This work focuses on exploring combinations of disintegrated bacterial cellulose nanofibres (BC) with graphene oxide (GO) (reduced and non-reduced) and phase change materials (PCMs) prepared in the form of foam-like structures. The presence of GO remarkable improves the fire-retardancy and provides dimensional stability to the foams while PCMs gives thermal energy storage capacity. The foams were exposed to methyltrimethoxysilane (MTMS) vapour to become hydrophobic which was confirmed by measuring water absorption capacity and water contact angle. To extend the multifunctionality of these nanocomposite foams, a selected composition was impregnated into an open-cell aluminium foam creating a hybrid structure (Al-BC/GO) with higher mechanical properties (increase in stress of 100 times) and high sound absorption coefficient (near 1 between 1000-4000 Hz). The low thermal conductivity confirms that this hybrid structure is a thermal insulator. These advantages highlight the potential applications of the proposed materials e.g. construction, automotive and aeronautical sectors.

Dual nanofibrillar-based bio-sorbent films composed of nanocellulose and lysozyme nanofibrils for mercury removal from spring waters.

The present study explores the preparation of dual nanofibrillar-based bio-sorbent films composed of cellulose nanofibrils (CNFs) and lysozyme nanofibrils (LNFs) for application in the removal of Hg(II) from aqueous solutions. The free-standing films were fabricated via simple vacuum filtration of water suspensions of CNFs and LNFs and disclose good mechanical and thermal properties. The Hg(II) removal efficiency was evaluated by atomic fluorescence spectroscopy in ultra-pure and natural spring waters contaminated with environmental realistic levels of mercury (50 µg L-1). The removal efficiency is pH-dependent reaching a maximum of 99 % after 24 h at a pH value close to the isoelectric point of the protein. Under the experimental conditions, the sorption kinetics are well described by the pseudo-second-order and Elovich models, suggesting a chemisorption mechanism. These results demonstrate the ability of the dual nanofibrillar-based films to remove Hg(II) from water samples reaching a residual concentration lower than the guideline value for water intended for human consumption (1 µg L-1). Therefore, the CNFs/LNFs bio-sorbents might be a solution to treat low-concentrated mercury-contaminated waters.

Multifunctional nanofibrous patches composed of nanocellulose and lysozyme nanofibers for cutaneous wound healing.

Cutaneous wounds frequently require the use of patches to promote healing, nevertheless, most commercial products are fabricated with non-biodegradable synthetic substrates that pose environmental problems upon disposal. Herein, the partnership between two biobased nanofibrous polymers, namely a polysaccharide (nanofibrillated cellulose (NFC)) and a protein (lysozyme nanofibers (LNFs)), is explored to design sustainable fibrous patches with good mechanical performance and biological functionalities for wound healing applications. Two patches with different morphologies were prepared by vacuum filtration of a water-based suspension of both nanofibers and by sequential filtration of the separated suspensions (layered patch). The resultant freestanding patches exhibited high thermal stability (up to 250 °C), mechanical performance (Young's modulus ≥3.7 GPa), and UV-barrier properties. The combination of the bioactive LNFs with the mechanically robust NFC conveyed antioxidant activity (76-79% DPPH scavenging) and antimicrobial activity against Staphylococcus aureus (3.5-log CFU mL-1 reduction), which is a major benefit to prevent microbial wound infections. Moreover, these patches are biocompatible towards L929 fibroblast cells, and the in vitro wound healing assay evidenced a good migration capacity leading to an almost complete wound occlusion. Therefore, the partnership between the two naturally derived nanofibrous polymers represents a potential blueprint to engineer sustainable multifunctional patches for cutaneous wound healing.

Anti-inflammatory and antioxidant nanostructured cellulose membranes loaded with phenolic-based ionic liquids for cutaneous application.

The utilization of natural compounds, such as phenolic acids and biopolymers, in the healthcare domain is gaining increasing attention. In this study, bacterial nanocellulose (BC) membranes were loaded with ionic liquids (ILs) based on phenolic acids. These ionic compounds, with improved solubility and bioavailability, were prepared by combining the cholinium cation with anions derived from caffeic, ellagic and gallic acids. The obtained BC-ILs membranes were homogeneous, conformable and their swelling ability agreed with the solubility of each IL. These membranes revealed a controlled ILs dissolution rate in the wet state and high antioxidant activity. In vitro assays performed with Raw 264.7 macrophages and HaCaT keratinocytes revealed that these novel BC-ILs membranes are non-cytotoxic and present relevant anti-inflammatory properties. Diffusion studies with Hanson vertical diffusion cells showed a prolonged release profile of the ILs from the BC membranes. Thus, this work, successfully demonstrates the potential of BC-ILs membranes for skin treatment.

Tuning lysozyme nanofibers dimensions using deep eutectic solvents for improved reinforcement ability.

Deep eutectic solvents (DESs), a novel generation of solvents, have recently been described as efficient and timesaving fibrillation agents for proteins. In this context, the present work aims at assessing the effect of the hydrogen bond donor (HBD) of cholinium chloride ([Ch]Cl):carboxylic acid based DESs on the dimensions (length and width) of lysozyme nanofibers (LNFs). Mono-, di- and tri-carboxylic acids (acetic, lactic, levulinic, malic and citric acids) were used to prepare different DES formulations, which were successfully used on the fibrillation of lysozyme. The results showed that the carboxylic acid (i.e. the HBD) plays an important role on the fibrillation efficiency and on the length of the ensuing LNFs with aspect-ratios always higher than those obtained by fibrillation with [Ch]Cl. The longest LNFs were obtained using lactic acid as the HBD with an average length of 1004 ±â€¯334 nm and width of 31.8 ±â€¯6.8 nm, and thus an aspect-ratio of ca. 32. The potential of these protein nanofibers as reinforcing additives was evaluated by preparing pullulan (PL)-based nanocomposite films containing 5% LNFs with different aspect-ratios, resulting in highly homogenous and transparent films with improved mechanical performance.

Production of lysozyme nanofibers using deep eutectic solvent aqueous solutions.

Amyloid fibrils have recently gained a lot of attention due to their morphology, functionality and mechanical strength, allowing for their application in nanofiber-based materials, biosensors, bioactive membranes and tissue engineering scaffolds. The in vitro production of amyloid fibrils is still a slow process, thus hampering the massive production of nanofibers and its consequent use. This work presents a new and faster (2-3h) fibrillation method for hen egg white lysozyme (HEWL) using a deep eutectic solvent based on cholinium chloride and acetic acid. Nanofibers with dimensions of 0.5-1µm in length and 0.02-0.1µm in thickness were obtained. Experimental variables such as temperature and pH were also studied, unveiling their influence in fibrillation time and nanofibers morphology. These results open a new scope for protein fibrillation into nanofibers with applications ranging from medicine to soft matter and nanotechnology.

Antimicrobial bacterial cellulose nanocomposites prepared by in situ polymerization of 2-aminoethyl methacrylate.

Antimicrobial bacterial cellulose/poly(2-aminoethyl methacrylate) (BC/PAEM) nanocomposites were prepared by in situ radical polymerization of 2-aminoethyl methacrylate, using variable amounts of N,N-methylenebis(acrylamide) (MBA) as cross-linker. The obtained nanocomposites were characterized in terms of their structure, morphology, thermal stability, mechanical properties and antibacterial activity. The ensuing composite membranes were significantly more transparent than those of pure BC and showed improved thermal and mechanical properties. The antibacterial activity of the obtained nanocomposites was assessed towards a recombinant bioluminescent Escherichia coli and only the non-crosslinked nanocomposite (BC/PAEM) proved to have antibacterial activity.

Protein-based materials: from sources to innovative sustainable materials for biomedical applications.

Proteins display an essential role in numerous natural systems due to their structural and biological properties. Given their unique properties, proteins have been thoroughly investigated in the last few decades, offering a myriad of solutions for the development of innovative biomaterials, including films, foams, composites and gels, in particular for biomedical applications such as drug delivery systems, biosensors and scaffolds for tissue regeneration. In this context, this review intends to give a general overview of the potential of protein based materials within the sustainable polymers context, covering aspects ranging from protein types, selection/isolation to properties of protein based (nano)materials and biomedical applications, passing through preparation methodologies of materials.

Bacterial cellulose membranes as transdermal delivery systems for diclofenac: in vitro dissolution and permeation studies.

Bacterial cellulose (BC) membranes were explored as novel nanostructured transdermal delivery systems for diclofenac sodium salt (a typical non-steroidal anti-inflammatory drug). Diclofenac sodium salt loaded BC membranes were prepared through a simple methodology, using glycerol as plasticizer, and characterized in terms of structure, morphology and swelling behavior. The membranes were very homogeneous, quite flexible and presented a considerably higher swelling behavior when compared with pure BC. In vitro diffusion studies with Franz cells, were conducted using human epidermal membranes, and showed that the incorporation of diclofenac in BC membranes provided similar permeation rates to those obtained with commercial patches and substantially lower than those observed with a commercial gel. This release profile together with the ease of application and the simple preparation and assembly of the drug-loaded membranes clearly indicates the enormous potentialities of using BC membranes for transdermal administration of diclofenac.