RESUMEN
P-type self-doping is known to hamper tin-based perovskites for developing high-performance solar cells by increasing the background current density and carrier recombination processes. In this work, we propose a gradient homojunction structure with germanium doping that generates an internal electric field across the perovskite film to deplete the charge carriers. This structure reduces the dark current density of perovskite by over 2 orders of magnitude and trap density by an order of magnitude. The resultant tin-based perovskite solar cells exhibit a higher power conversion efficiency of 13.3% and excellent stability, maintaining 95% and 85% of their initial efficiencies after 250 min of continuous illumination and 3800 h of storage, respectively. We reveal the homojunction formation mechanism using density functional theory calculations and molecular level characterizations. Our work provides a reliable strategy for controlling the spatial energy levels in tin perovskite films and offers insights into designing intriguing lead-free perovskite optoelectronics.
RESUMEN
Herein, we report the synthesis of a novel intramolecular donor-acceptor (D-A) system ([12]CPP-8TPAOMe) based on cycloparaphenylenes (CPPs) grafted with eight di(4-methoxyphenyl)amino groups (TPAOMe) as donors. Compared to [12]CPP, D-A nanohoop exhibited significant changes in physical properties, including a large redshift (>78â nm) in the fluorescence spectrum and novel positive solvatofluorochromic properties with a maximum peak ranging from 484â nm to 546â nm. The potential applications of [12]CPP-8TPAOMe in electron- and hole-transport devices were further investigated, and its bipolar behavior as a charge transport active layer was clearly observed.
RESUMEN
Electrochemical reduction of carbon dioxide (CO2) to carbon monoxide (CO) is the first step in the synthesis of more complex carbon-based fuels and feedstocks using renewable electricity. Unfortunately, the reaction suffers from slow kinetics owing to the low local concentration of CO2 surrounding typical CO2 reduction reaction catalysts. Alkali metal cations are known to overcome this limitation through non-covalent interactions with adsorbed reagent species, but the effect is restricted by the solubility of relevant salts. Large applied electrode potentials can also enhance CO2 adsorption, but this comes at the cost of increased hydrogen (H2) evolution. Here we report that nanostructured electrodes produce, at low applied overpotentials, local high electric fields that concentrate electrolyte cations, which in turn leads to a high local concentration of CO2 close to the active CO2 reduction reaction surface. Simulations reveal tenfold higher electric fields associated with metallic nanometre-sized tips compared to quasi-planar electrode regions, and measurements using gold nanoneedles confirm a field-induced reagent concentration that enables the CO2 reduction reaction to proceed with a geometric current density for CO of 22 milliamperes per square centimetre at -0.35 volts (overpotential of 0.24 volts). This performance surpasses by an order of magnitude the performance of the best gold nanorods, nanoparticles and oxide-derived noble metal catalysts. Similarly designed palladium nanoneedle electrocatalysts produce formate with a Faradaic efficiency of more than 90 per cent and an unprecedented geometric current density for formate of 10 milliamperes per square centimetre at -0.2 volts, demonstrating the wider applicability of the field-induced reagent concentration concept.
RESUMEN
Quantum dots (QDs) are promising candidates for solution-processed thin-film optoelectronic devices. Both the diffusion length and the mobility of photoexcited charge carriers in QD solids are critical determinants of solar cell performance; yet various techniques offer diverse values of these key parameters even in notionally similar films. Here we report diffusion lengths and interdot charge transfer rates using a 3D donor/acceptor technique that directly monitors the rate at which photoexcitations reach small-bandgap dot inclusions having a known spacing within a larger-bandgap QD matrix. Instead of relying on photoluminescence (which can be weak in strongly coupled QD solids), we use ultrafast transient absorption spectroscopy, a method where sensitivity is undiminished by exciton dissociation. We measure record diffusion lengths of â¼300 nm in metal halide exchanged PbS QD solids that have led to power conversion efficiencies of 12%, and determine 8 ps interdot hopping of carriers following photoexcitation, among the fastest rates reported for PbS QD solids. We also find that QD solids composed of smaller QDs ( d = â¼3.2 nm) exhibit 5 times faster interdot charge transfer rates and 10 times lower trap state densities compared to larger ( d = â¼5.5 nm) QDs.
RESUMEN
Colloidal quantum dot (CQD) solar cells are solution-processed photovoltaics with broad spectral absorption tunability. Major advances in their efficiency have been made via improved CQD surface passivation and device architectures with enhanced charge carrier collection. Herein, we demonstrate a new strategy to improve further the passivation of CQDs starting from the solution phase. A cosolvent system is employed to tune the solvent polarity in order to achieve the solvation of methylammonium iodide (MAI) and the dispersion of hydrophobic PbS CQDs simultaneously in a homogeneous phase, otherwise not achieved in a single solvent. This process enables MAI to access the CQDs to confer improved passivation. This, in turn, allows for efficient charge extraction from a thicker photoactive layer device, leading to a certified solar cell power conversion efficiency of 10.6%, a new certified record in CQD photovoltaics.
RESUMEN
BACKGROUND: Acute kidney injury (AKI) has become a worldwide public health problem, but little information is available about the disease burden in China. We aimed to evaluate the burden of AKI and assess the availability of diagnosis and treatment in China. METHODS: We launched a nationwide, cross-sectional survey of adult patients who were admitted to hospital in 2013 in academic or local hospitals from 22 provinces in mainland China. Patients with suspected AKI were screened out on the basis of changes in serum creatinine by the Laboratory Information System, and we reviewed medical records for 2 months (January and July) to confirm diagnoses. We assessed rates of AKI according to two identification criteria: the 2012 Kidney Disease: Improving Global Outcomes (KDIGO) AKI definition and an increase or decrease in serum creatinine by 50% during hospital stay (expanded criteria). We estimated national rates with data from the 2013 report by the Chinese National Health and Family Planning Commission and National Bureau of Statistics. FINDINGS: Of 2,223,230 patients admitted to the 44 hospitals screened in 2013, 154,950 (7·0%) were suspected of having AKI by electronic screening, of whom 26,086 patients (from 374,286 total admissions) were reviewed with medical records to confirm the diagnosis of AKI. The detection rate of AKI was 0·99% (3687 of 374,286) by KDIGO criteria and 2·03% (7604 of 374,286) by expanded criteria, from which we estimate that 1·4-2·9 million people with AKI were admitted to hospital in China in 2013. The non-recognition rate of AKI was 74·2% (5608 of 7555 with available data). Renal referral was done in 21·4% (1625 of 7604) of the AKI cases, and renal replacement therapy was done in 59·3% (531 of 896) of those who had the indications. Delayed AKI recognition was an independent risk factor for in-hospital mortality, and renal referral was an independent protective factor for AKI under-recognition and mortality INTERPRETATION: AKI has become a huge medical burden in China, with substantial underdiagnosis and undertreatment. Nephrologists should take the responsibility for leading the battle against AKI. FUNDING: National 985 Project of China, National Natural Science Foundation of China, Beijing Training Program for Talents, International Society of Nephrology Research Committee, and Bethune Fund Management Committee.
Asunto(s)
Lesión Renal Aguda/epidemiología , Lesión Renal Aguda/diagnóstico , Lesión Renal Aguda/terapia , Adolescente , Adulto , Distribución por Edad , Anciano , Anciano de 80 o más Años , China/epidemiología , Costo de Enfermedad , Estudios Transversales , Diagnóstico Tardío/estadística & datos numéricos , Femenino , Mortalidad Hospitalaria , Hospitalización/estadística & datos numéricos , Humanos , Masculino , Persona de Mediana Edad , Distribución por Sexo , Adulto JovenRESUMEN
Colloidal quantum dots (CQDs) offer promise in flexible electronics, light sensing and energy conversion. These applications rely on rectifying junctions that require the creation of high-quality CQD solids that are controllably n-type (electron-rich) or p-type (hole-rich). Unfortunately, n-type semiconductors made using soft matter are notoriously prone to oxidation within minutes of air exposure. Here we report high-performance, air-stable n-type CQD solids. Using density functional theory we identify inorganic passivants that bind strongly to the CQD surface and repel oxidative attack. A materials processing strategy that wards off strong protic attack by polar solvents enabled the synthesis of an air-stable n-type PbS CQD solid. This material was used to build an air-processed inverted quantum junction device, which shows the highest current density from any CQD solar cell and a solar power conversion efficiency as high as 8%. We also feature the n-type CQD solid in the rapid, sensitive, and specific detection of atmospheric NO2. This work paves the way for new families of electronic devices that leverage air-stable quantum-tuned materials.
RESUMEN
Photovoltaic devices based on lead iodide perovskite films have seen rapid advancements, recently achieving an impressive 17.9% certified solar power conversion efficiency. Reports have consistently emphasized that the specific choice of growth conditions and chemical precursors is central to achieving superior performance from these materials; yet the roles and mechanisms underlying the selection of materials processing route is poorly understood. Here we show that films grown under iodine-rich conditions are prone to a high density of deep electronic traps (recombination centers), while the use of a chloride precursor avoids the formation of key defects (Pb atom substituted by I) responsible for short diffusion lengths and poor photovoltaic performance. Furthermore, the lowest-energy surfaces of perovskite crystals are found to be entirely trap-free, preserving both electron and hole delocalization to a remarkable degree, helping to account for explaining the success of polycrystalline perovskite films. We construct perovskite films from I-poor conditions using a lead acetate precursor, and our measurement of a long (600 ± 40 nm) diffusion length confirms this new picture of the importance of growth conditions.
RESUMEN
Petrochemical wastewater is of huge quantity released during the production and complicated contaminants of petrochemical wastewater will have immense negative impact on ecology environment. Three-dimensional excitation-emission matrix fluorescence(3D-EEM) was used to investigate the characteristic fluorescence of influent and effluent from each processing unit of Hydrolysis-acidification +A/O+ Contact-oxidation Process in a typical petrochemical wastewater treatment plant . The results showed that there were 4 fluorescence peaks named Peak A, Peak B, Peak D, Peak E in the spectrum chart of influent, they are around lambda(ex/lambda(em) = 220/300, 225/340, 270/300, 275/340 nm, the primary source of fluorescence organic matter(FOM) is industrial wastewater. The fluorescence intensity of each fluorescence peak was decreased, while location was unchanged in the effluent of Hydrolysis-acidification. Peak C appeared from the effluent of anaerobic tank at lambda(ex)/lambda(em) = 250/425 nm, then the fluorescence intensity of Peak C was enhanced in the effluent of aerobic tank. Peak A disappeared from the effluent of secondary sedimentation tank. The spectrum chart of the wastewater had no obvious variation after secondary sedimentation tank. The removal rate of FOM was expressed with the degradation percentage of the fluorescence intensity, the total FOM was reduced by 92.0% after processing, and the removal rate of the FOM fluoresce around Peak A, Peak B, Peak D, Peak E were 100.0%, 91.2%, 80.3%, 92.0% respectively. A volatile I(Peak B)/I(Peak E) value of influent but a relatively stable value of effluent demonstrated that the wastewater treatment plant operated steadily and the process has higher capacity in resistance to shock loading.
Asunto(s)
Compuestos Orgánicos , Eliminación de Residuos Líquidos , Industria Procesadora y de Extracción , Petróleo , Espectrometría de Fluorescencia , Aguas ResidualesRESUMEN
Conventional perovskite solar cells (PSC) built on transparent conductive oxide (TCO) glass face a fundamental challenge to retain fill factor (FF) for large-area upscaling due to series resistance loss. Building a perovskite solar cell on metal has the potential to reduce this FF loss and is promising for flexible applications. However, their efficiency and stability lag far behind their TCO counterparts. Herein, findings on the complex chemical reactions and degradation-promoting processes at different perovskite/metal (Cu, Au, Ag, and Mo) interfaces, which are closely linked with the inherent stability; and the interlayer engineering for perovskite/metal interface's band alignment, which plays an essential role in achieving high efficiency, are reported. Leveraging these findings, 21% power conversion efficiency (PCE) is achieved for 1 cm2 perovskite solar cells using a p-i-n top-illumination structure on a molybdenum substrate, the highest reported for a PSC built on metal. Notably, the FF and PCE losses due to area upscaling are remarkably reduced by one order of magnitude relative to the counterparts on conventional TCO glass, highlighting an alternative pathway for PSC upscaling and module design.
Asunto(s)
Compuestos de Calcio , Metales , Óxidos , MolibdenoRESUMEN
Inserting an ultrathin low-conductivity interlayer between the absorber and transport layer has emerged as an important strategy for reducing surface recombination in the best perovskite solar cells. However, a challenge with this approach is a trade-off between the open-circuit voltage (Voc) and the fill factor (FF). Here, we overcame this challenge by introducing a thick (about 100 nanometers) insulator layer with random nanoscale openings. We performed drift-diffusion simulations for cells with this porous insulator contact (PIC) and realized it using a solution process by controlling the growth mode of alumina nanoplates. Leveraging a PIC with an approximately 25% reduced contact area, we achieved an efficiency of up to 25.5% (certified steady-state efficiency 24.7%) in p-i-n devices. The product of Voc × FF was 87.9% of the Shockley-Queisser limit. The surface recombination velocity at the p-type contact was reduced from 64.2 to 9.2 centimeters per second. The bulk recombination lifetime was increased from 1.2 to 6.0 microseconds because of improvements in the perovskite crystallinity. The improved wettability of the perovskite precursor solution allowed us to demonstrate a 23.3% efficient 1-square-centimeter p-i-n cell. We demonstrate here its broad applicability for different p-type contacts and perovskite compositions.
RESUMEN
OBJECTIVE: To establish and validate a model to predict acute kidney injury (AKI) following wasp stings. METHODS: In this multicentre prospective study, 508 patients with wasp stings from July 2015 to December 2019 were randomly divided into a training set (n = 381) and a validation set (n = 127) for internal and external validation. Risk factors were identified, and a model was established to predict the probability of AKI following multiple wasp stings using an individual nomogram and a predictive formula. The performances of the model were assessed by using the area under the curve (AUC), accuracy (ACC) of the receiver operating characteristic curve and decision curve analysis. RESULTS: The number of stings, aspartate aminotransferase >147 U/L, lactate dehydrogenase >477 U/L, time from stings to admission >12 h and activated partial thromboplastin time >49 s were demonstrated to be independent risk factors for AKI following wasp stings (all P value < 0.05) and were incorporated into the model. The performances of the model were validated (AUC = 0.950 [95% CI: 0.923 to 0.969], ACC = 0.916 and AUC = 0.953 [95% CI: 0.900 to 0.982], ACC = 0.906 in the training set and validation set, respectively). The predictive formula and the nomogram of the model could be utilized to predict AKI following wasp stings, which have sufficient accuracies, good predictive capabilities and good net benefits. CONCLUSION: The predictive formula and the individual nomogram of the model might serve as promising predictive tools to assess the probability of AKI following wasp stings.
Asunto(s)
Lesión Renal Aguda , Mordeduras y Picaduras de Insectos , Avispas , Lesión Renal Aguda/etiología , Animales , Predicción , Humanos , Mordeduras y Picaduras de Insectos/complicaciones , Modelos Biológicos , Estudios Prospectivos , Factores de RiesgoRESUMEN
Fullerene derivatives, especially [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), have been widely applied as electron transport layers of inverted planar heterojunction perovskite solar cells (PSCs). However, the solution-processed PCBM capping layer suffers from limited surface wetting which hinders the improvement in efficiency and scalability of PSCs. Herein, we develop a facile hybrid solvent strategy that enables very fast wetting of the PCBM capping layer atop of the perovskite surface, leading to an improved interfacial contact and electron transport. The significantly enhanced wettability of the PCBM solution fulfilled through blending isopropyl alcohol into the commonly used chlorobenzene (CB) is attributed to the reduced surface tension while retaining viscosity. As a result, the electron mobility and electric conductivity of the PCBM capping layer increase by around two times, and the PSC devices exhibit the highest power conversion efficiency (PCE) of 19.92%, which is improved by â¼18% relative to that of the control device (16.78%). Importantly, this strategy is also applicable for other alcohols (ethanol and methanol) and CB blends. Moreover, the fast wetting approach enables us to deposit the PCBM capping layer using a facile drop-casting method, affording comparable PCEs to those obtained by the conventional spin-coating method, which is not achievable by using the conventional single solvent. This fast wetting PCBM capping layer also contributes to efficiency improvement of large-area (1 cm2) devices. These advances hold great potential for other scalable deposition methods such as blade-coating and slot-die coating.
RESUMEN
Wide-band gap metal halide perovskites are promising semiconductors to pair with silicon in tandem solar cells to pursue the goal of achieving power conversion efficiency (PCE) greater than 30% at low cost. However, wide-band gap perovskite solar cells have been fundamentally limited by photoinduced phase segregation and low open-circuit voltage. We report efficient 1.67-electron volt wide-band gap perovskite top cells using triple-halide alloys (chlorine, bromine, iodine) to tailor the band gap and stabilize the semiconductor under illumination. We show a factor of 2 increase in photocarrier lifetime and charge-carrier mobility that resulted from enhancing the solubility of chlorine by replacing some of the iodine with bromine to shrink the lattice parameter. We observed a suppression of light-induced phase segregation in films even at 100-sun illumination intensity and less than 4% degradation in semitransparent top cells after 1000 hours of maximum power point (MPP) operation at 60°C. By integrating these top cells with silicon bottom cells, we achieved a PCE of 27% in two-terminal monolithic tandems with an area of 1 square centimeter.
RESUMEN
We investigated the effects of toxic wastewater generated during the production of phenol-acetone on activated sludge and tested pretreatment methods to selectively remove the toxicity. We found that the microbial activity in the activated sludge was inhibited by the wastewater, in which cumene hydroperoxide (CHP) with a medium effective concentration (EC50) of 225 mg L-1 was the main toxic substance. We tested one pretreatment method with ferrous iron to selectively remove the CHP. The CHP decomposition process, which mainly produced acetophenone, was very quick. The CHP was selectively transformed into low-toxicity organics, and a maximum of 92% was removed when 1.08 mmol L-1 of ferrous iron was added, for a reaction time of 10 min, a pH of 5, and a temperature of 25 °C, and the resulting wastewater only slightly inhibited the oxygen uptake rate of activated sludge. The acclimation of activated sludge was accelerated, and a COD removal rate of more than 85% was achieved within a week. Our results confirm that ferrous iron provides a cost-effective method to selectively remove toxins from wastewater.
Asunto(s)
Eliminación de Residuos Líquidos/métodos , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Acetona , Fenol , Fenoles , Aguas del Alcantarillado/química , TemperaturaRESUMEN
Colloidal quantum dot (CQD) solar cells have risen rapidly in performance; however, their low-cost fabrication under realistic ambient conditions remains elusive. This study uncovers that humid environments curtail the power conversion efficiency (PCE) of solar cells by preventing the needed oxygen doping of the hole transporter during ambient fabrication. A simple oxygen-doping step enabling ambient manufacturing irrespective of seasonal humidity variations is devised. Solar cells with PCE > 10% are printed under high humidity at industrially viable speeds. The devices use a tiny fraction of the ink typically needed and are air stable over a year. The humidity-resilient fabrication of efficient CQD solar cells breaks a long-standing compromise, which should accelerate commercialization.
RESUMEN
As crystalline silicon solar cells approach in efficiency their theoretical limit, strategies are being developed to achieve efficient infrared energy harvesting to augment silicon using solar photons from beyond its 1100 nm absorption edge. Herein we report a strategy that uses multi-bandgap lead sulfide colloidal quantum dot (CQD) ensembles to maximize short-circuit current and open-circuit voltage simultaneously. We engineer the density of states to achieve simultaneously a large quasi-Fermi level splitting and a tailored optical response that matches the infrared solar spectrum. We shape the density of states by selectively introducing larger-bandgap CQDs within a smaller-bandgap CQD population, achieving a 40 meV increase in open-circuit voltage. The near-unity internal quantum efficiency in the optimized multi-bandgap CQD ensemble yielded a maximized photocurrent of 3.7 ± 0.2 mA cm-2. This provides a record for silicon-filtered power conversion efficiency equal to one power point, a 25% (relative) improvement compared to the best previously-reported results.
RESUMEN
Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size1,2. Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon 3 . Advances in surface passivation2,4-7, combined with advances in device structures 8 , have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 2016 9 . Further gains in performance are available if the thickness of the devices can be increased to maximize the light harvesting at a high fill factor (FF). However, at present the active layer thickness is limited to ~300 nm by the concomitant photocarrier diffusion length. To date, CQD devices thicker than this typically exhibit decreases in short-circuit current (JSC) and open-circuit voltage (VOC), as seen in previous reports3,9-11. Here, we report a matrix engineering strategy for CQD solids that significantly enhances the photocarrier diffusion length. We find that a hybrid inorganic-amine coordinating complex enables us to generate a high-quality two-dimensionally (2D) confined inorganic matrix that programmes internanoparticle spacing at the atomic scale. This strategy enables the reduction of structural and energetic disorder in the solid and concurrent improvements in the CQD packing density and uniformity. Consequently, planar devices with a nearly doubled active layer thicknesses (~600 nm) and record values of JSC (32 mA cm-2) are fabricated. The VOC improved as the current was increased. We demonstrate CQD solar cells with a certified record efficiency of 12%.
RESUMEN
Quantum dot and well architectures are attractive for infrared optoelectronics, and have led to the realization of compelling light sensors. However, they require well-defined passivated interfaces and rapid charge transport, and this has restricted their efficient implementation to costly vacuum-epitaxially grown semiconductors. Here we report solution-processed, sensitive infrared field-emission photodetectors. Using quantum-dots-in-perovskite, we demonstrate the extraction of photocarriers via field emission, followed by the recirculation of photogenerated carriers. We use in operando ultrafast transient spectroscopy to sense bias-dependent photoemission and recapture in field-emission devices. The resultant photodiodes exploit the superior electronic transport properties of organometal halide perovskites, the quantum-size-tuned absorption of the colloidal quantum dots and their matched interface. These field-emission quantum-dot-in-perovskite photodiodes extend the perovskite response into the short-wavelength infrared and achieve measured specific detectivities that exceed 1012 Jones. The results pave the way towards novel functional photonic devices with applications in photovoltaics and light emission.
RESUMEN
Application of pseudohalogens in colloidal quantum dot (CQD) solar-cell active layers increases the solar-cell performance by reducing the trap densities and implementing thick CQD films. Pseudohalogens are polyatomic analogs of halogens, whose chemistry allows them to substitute halogen atoms by strong chemical interactions with the CQD surfaces. The pseudohalide thiocyanate anion is used to achieve a hybrid surface passivation. A fourfold reduced trap state density than in a control is observed by using a suite of field-effect transistor studies. This translates directly into the thickest CQD active layer ever reported, enabled by enhanced transport lengths in this new class of materials, and leads to the highest external quantum efficiency, 80% at the excitonic peak, compared with previous reports of CQD solar cells.